You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

72 lines
1.9 KiB

#
# Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
SPM: Introduce Secure Partition Manager A Secure Partition is a software execution environment instantiated in S-EL0 that can be used to implement simple management and security services. Since S-EL0 is an unprivileged exception level, a Secure Partition relies on privileged firmware e.g. ARM Trusted Firmware to be granted access to system and processor resources. Essentially, it is a software sandbox that runs under the control of privileged software in the Secure World and accesses the following system resources: - Memory and device regions in the system address map. - PE system registers. - A range of asynchronous exceptions e.g. interrupts. - A range of synchronous exceptions e.g. SMC function identifiers. A Secure Partition enables privileged firmware to implement only the absolutely essential secure services in EL3 and instantiate the rest in a partition. Since the partition executes in S-EL0, its implementation cannot be overly complex. The component in ARM Trusted Firmware responsible for managing a Secure Partition is called the Secure Partition Manager (SPM). The SPM is responsible for the following: - Validating and allocating resources requested by a Secure Partition. - Implementing a well defined interface that is used for initialising a Secure Partition. - Implementing a well defined interface that is used by the normal world and other secure services for accessing the services exported by a Secure Partition. - Implementing a well defined interface that is used by a Secure Partition to fulfil service requests. - Instantiating the software execution environment required by a Secure Partition to fulfil a service request. Change-Id: I6f7862d6bba8732db5b73f54e789d717a35e802f Co-authored-by: Douglas Raillard <douglas.raillard@arm.com> Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com> Co-authored-by: Achin Gupta <achin.gupta@arm.com> Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
7 years ago
################################################################################
# Include SPM Makefile
################################################################################
ifeq (${ENABLE_SPM},1)
$(info Including SPM makefile)
include services/std_svc/spm/spm.mk
endif
include lib/psci/psci_lib.mk
BL31_SOURCES += bl31/bl31_main.c \
11 years ago
bl31/interrupt_mgmt.c \
bl31/aarch64/bl31_entrypoint.S \
bl31/aarch64/runtime_exceptions.S \
bl31/aarch64/crash_reporting.S \
bl31/bl31_context_mgmt.c \
common/runtime_svc.c \
plat/common/aarch64/platform_mp_stack.S \
services/std_svc/std_svc_setup.c \
SPM: Introduce Secure Partition Manager A Secure Partition is a software execution environment instantiated in S-EL0 that can be used to implement simple management and security services. Since S-EL0 is an unprivileged exception level, a Secure Partition relies on privileged firmware e.g. ARM Trusted Firmware to be granted access to system and processor resources. Essentially, it is a software sandbox that runs under the control of privileged software in the Secure World and accesses the following system resources: - Memory and device regions in the system address map. - PE system registers. - A range of asynchronous exceptions e.g. interrupts. - A range of synchronous exceptions e.g. SMC function identifiers. A Secure Partition enables privileged firmware to implement only the absolutely essential secure services in EL3 and instantiate the rest in a partition. Since the partition executes in S-EL0, its implementation cannot be overly complex. The component in ARM Trusted Firmware responsible for managing a Secure Partition is called the Secure Partition Manager (SPM). The SPM is responsible for the following: - Validating and allocating resources requested by a Secure Partition. - Implementing a well defined interface that is used for initialising a Secure Partition. - Implementing a well defined interface that is used by the normal world and other secure services for accessing the services exported by a Secure Partition. - Implementing a well defined interface that is used by a Secure Partition to fulfil service requests. - Instantiating the software execution environment required by a Secure Partition to fulfil a service request. Change-Id: I6f7862d6bba8732db5b73f54e789d717a35e802f Co-authored-by: Douglas Raillard <douglas.raillard@arm.com> Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com> Co-authored-by: Achin Gupta <achin.gupta@arm.com> Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
7 years ago
${PSCI_LIB_SOURCES} \
${SPM_SOURCES} \
ifeq (${ENABLE_PMF}, 1)
BL31_SOURCES += lib/pmf/pmf_main.c
endif
BL31: Introduce Exception Handling Framework EHF is a framework that allows dispatching of EL3 interrupts to their respective handlers in EL3. This framework facilitates the firmware-first error handling policy in which asynchronous exceptions may be routed to EL3. Such exceptions may be handed over to respective exception handlers. Individual handlers might further delegate exception handling to lower ELs. The framework associates the delegated execution to lower ELs with a priority value. For interrupts, this corresponds to the priorities programmed in GIC; for other types of exceptions, viz. SErrors or Synchronous External Aborts, individual dispatchers shall explicitly associate delegation to a secure priority. In order to prevent lower priority interrupts from preempting higher priority execution, the framework provides helpers to control preemption by virtue of programming Priority Mask register in the interrupt controller. This commit allows for handling interrupts targeted at EL3. Exception handlers own interrupts by assigning them a range of secure priorities, and registering handlers for each priority range it owns. Support for exception handling in BL31 image is enabled by setting the build option EL3_EXCEPTION_HANDLING=1. Documentation to follow. NOTE: The framework assumes the priority scheme supported by platform interrupt controller is compliant with that of ARM GIC architecture (v2 or later). Change-Id: I7224337e4cea47c6ca7d7a4ca22a3716939f7e42 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
7 years ago
ifeq (${EL3_EXCEPTION_HANDLING},1)
BL31_SOURCES += bl31/ehf.c
endif
ifeq (${SDEI_SUPPORT},1)
ifeq (${EL3_EXCEPTION_HANDLING},0)
$(error EL3_EXCEPTION_HANDLING must be 1 for SDEI support)
endif
BL31_SOURCES += services/std_svc/sdei/sdei_event.c \
services/std_svc/sdei/sdei_intr_mgmt.c \
services/std_svc/sdei/sdei_main.c \
services/std_svc/sdei/sdei_state.c
endif
ifeq (${ENABLE_SPE_FOR_LOWER_ELS},1)
BL31_SOURCES += lib/extensions/spe/spe.c
endif
ifeq (${ENABLE_AMU},1)
BL31_SOURCES += lib/extensions/amu/aarch64/amu.c
endif
BL31_LINKERFILE := bl31/bl31.ld.S
# Flag used to indicate if Crash reporting via console should be included
# in BL31. This defaults to being present in DEBUG builds only
ifndef CRASH_REPORTING
CRASH_REPORTING := $(DEBUG)
endif
$(eval $(call assert_boolean,CRASH_REPORTING))
BL31: Introduce Exception Handling Framework EHF is a framework that allows dispatching of EL3 interrupts to their respective handlers in EL3. This framework facilitates the firmware-first error handling policy in which asynchronous exceptions may be routed to EL3. Such exceptions may be handed over to respective exception handlers. Individual handlers might further delegate exception handling to lower ELs. The framework associates the delegated execution to lower ELs with a priority value. For interrupts, this corresponds to the priorities programmed in GIC; for other types of exceptions, viz. SErrors or Synchronous External Aborts, individual dispatchers shall explicitly associate delegation to a secure priority. In order to prevent lower priority interrupts from preempting higher priority execution, the framework provides helpers to control preemption by virtue of programming Priority Mask register in the interrupt controller. This commit allows for handling interrupts targeted at EL3. Exception handlers own interrupts by assigning them a range of secure priorities, and registering handlers for each priority range it owns. Support for exception handling in BL31 image is enabled by setting the build option EL3_EXCEPTION_HANDLING=1. Documentation to follow. NOTE: The framework assumes the priority scheme supported by platform interrupt controller is compliant with that of ARM GIC architecture (v2 or later). Change-Id: I7224337e4cea47c6ca7d7a4ca22a3716939f7e42 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
7 years ago
$(eval $(call assert_boolean,EL3_EXCEPTION_HANDLING))
$(eval $(call assert_boolean,SDEI_SUPPORT))
BL31: Introduce Exception Handling Framework EHF is a framework that allows dispatching of EL3 interrupts to their respective handlers in EL3. This framework facilitates the firmware-first error handling policy in which asynchronous exceptions may be routed to EL3. Such exceptions may be handed over to respective exception handlers. Individual handlers might further delegate exception handling to lower ELs. The framework associates the delegated execution to lower ELs with a priority value. For interrupts, this corresponds to the priorities programmed in GIC; for other types of exceptions, viz. SErrors or Synchronous External Aborts, individual dispatchers shall explicitly associate delegation to a secure priority. In order to prevent lower priority interrupts from preempting higher priority execution, the framework provides helpers to control preemption by virtue of programming Priority Mask register in the interrupt controller. This commit allows for handling interrupts targeted at EL3. Exception handlers own interrupts by assigning them a range of secure priorities, and registering handlers for each priority range it owns. Support for exception handling in BL31 image is enabled by setting the build option EL3_EXCEPTION_HANDLING=1. Documentation to follow. NOTE: The framework assumes the priority scheme supported by platform interrupt controller is compliant with that of ARM GIC architecture (v2 or later). Change-Id: I7224337e4cea47c6ca7d7a4ca22a3716939f7e42 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
7 years ago
$(eval $(call add_define,CRASH_REPORTING))
BL31: Introduce Exception Handling Framework EHF is a framework that allows dispatching of EL3 interrupts to their respective handlers in EL3. This framework facilitates the firmware-first error handling policy in which asynchronous exceptions may be routed to EL3. Such exceptions may be handed over to respective exception handlers. Individual handlers might further delegate exception handling to lower ELs. The framework associates the delegated execution to lower ELs with a priority value. For interrupts, this corresponds to the priorities programmed in GIC; for other types of exceptions, viz. SErrors or Synchronous External Aborts, individual dispatchers shall explicitly associate delegation to a secure priority. In order to prevent lower priority interrupts from preempting higher priority execution, the framework provides helpers to control preemption by virtue of programming Priority Mask register in the interrupt controller. This commit allows for handling interrupts targeted at EL3. Exception handlers own interrupts by assigning them a range of secure priorities, and registering handlers for each priority range it owns. Support for exception handling in BL31 image is enabled by setting the build option EL3_EXCEPTION_HANDLING=1. Documentation to follow. NOTE: The framework assumes the priority scheme supported by platform interrupt controller is compliant with that of ARM GIC architecture (v2 or later). Change-Id: I7224337e4cea47c6ca7d7a4ca22a3716939f7e42 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
7 years ago
$(eval $(call add_define,EL3_EXCEPTION_HANDLING))
$(eval $(call add_define,SDEI_SUPPORT))