You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

122 lines
4.0 KiB

Add Test Secure Payload (BL3-2) image This patch adds a simple TSP as the BL3-2 image. The secure payload executes in S-EL1. It paves the way for the addition of the TSP dispatcher runtime service to BL3-1. The TSP and the dispatcher service will serve as an example of the runtime firmware's ability to toggle execution between the non-secure and secure states in response to SMC request from the non-secure state. The TSP will be replaced by a Trusted OS in a real system. The TSP also exports a set of handlers which should be called in response to a PSCI power management event e.g a cpu being suspended or turned off. For now it runs out of Secure DRAM on the ARM FVP port and will be moved to Secure SRAM later. The default translation table setup code assumes that the caller is executing out of secure SRAM. Hence the TSP exports its own translation table setup function. The TSP only services Fast SMCs, is non-reentrant and non-interruptible. It does arithmetic operations on two sets of four operands, one set supplied by the non-secure client, and the other supplied by the TSP dispatcher in EL3. It returns the result according to the Secure Monitor Calling convention standard. This TSP has two functional entry points: - An initial, one-time entry point through which the TSP is initialized and prepares for receiving further requests from secure monitor/dispatcher - A fast SMC service entry point through which the TSP dispatcher requests secure services on behalf of the non-secure client Change-Id: I24377df53399307e2560a025eb2c82ce98ab3931 Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
11 years ago
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <platform.h>
OUTPUT_FORMAT(PLATFORM_LINKER_FORMAT)
OUTPUT_ARCH(PLATFORM_LINKER_ARCH)
MEMORY {
RAM (rwx): ORIGIN = TZDRAM_BASE, LENGTH = TZDRAM_SIZE
}
SECTIONS
{
. = BL32_BASE;
ASSERT(. == ALIGN(4096),
"BL32_BASE address is not aligned on a page boundary.")
ro . : {
__RO_START__ = .;
*tsp_entrypoint.o(.text)
*(.text)
*(.rodata*)
*(.vectors)
__RO_END_UNALIGNED__ = .;
/*
* Memory page(s) mapped to this section will be marked as
* read-only, executable. No RW data from the next section must
* creep in. Ensure the rest of the current memory page is unused.
*/
. = NEXT(4096);
__RO_END__ = .;
} >RAM
.data . : {
__DATA_START__ = .;
*(.data)
__DATA_END__ = .;
} >RAM
stacks (NOLOAD) : {
__STACKS_START__ = .;
*(tzfw_normal_stacks)
__STACKS_END__ = .;
} >RAM
/*
* The .bss section gets initialised to 0 at runtime.
* Its base address must be 16-byte aligned.
*/
.bss : ALIGN(16) {
__BSS_START__ = .;
*(SORT_BY_ALIGNMENT(.bss))
*(COMMON)
__BSS_END__ = .;
} >RAM
/*
* The xlat_table section is for full, aligned page tables (4K).
* Removing them from .bss avoids forcing 4K alignment on
* the .bss section and eliminates the unecessary zero init
*/
xlat_table (NOLOAD) : {
*(xlat_table)
} >RAM
/*
* The base address of the coherent memory section must be page-aligned (4K)
* to guarantee that the coherent data are stored on their own pages and
* are not mixed with normal data. This is required to set up the correct
* memory attributes for the coherent data page tables.
*/
coherent_ram (NOLOAD) : ALIGN(4096) {
__COHERENT_RAM_START__ = .;
*(tzfw_coherent_mem)
__COHERENT_RAM_END_UNALIGNED__ = .;
/*
* Memory page(s) mapped to this section will be marked
* as device memory. No other unexpected data must creep in.
* Ensure the rest of the current memory page is unused.
*/
. = NEXT(4096);
__COHERENT_RAM_END__ = .;
} >RAM
__BL2_END__ = .;
__BSS_SIZE__ = SIZEOF(.bss);
__COHERENT_RAM_UNALIGNED_SIZE__ =
__COHERENT_RAM_END_UNALIGNED__ - __COHERENT_RAM_START__;
ASSERT(. <= TZDRAM_BASE + (1 << 21), "BL32 image does not fit in the first 2MB of Trusted DRAM.")
}