You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

39 lines
1.2 KiB

rcar-gen3: initial commit for the rcar-gen3 boards Reference code: ============== rar_gen3: IPL and Secure Monitor Rev1.0.22 https://github.com/renesas-rcar/arm-trusted-firmware [rcar_gen3] Author: Takuya Sakata <takuya.sakata.wz@bp.renesas.com> Date: Thu Aug 30 21:26:41 2018 +0900 Update IPL and Secure Monitor Rev1.0.22 General Information: =================== This port has been tested on the Salvator-X Soc_id r8a7795 revision ES1.1 (uses an SPD). Build Tested: ------------- ATFW_OPT="LSI=H3 RCAR_DRAM_SPLIT=1 RCAR_LOSSY_ENABLE=1" MBEDTLS_DIR=$mbedtls $ make clean bl2 bl31 rcar PLAT=rcar ${ATFW_OPT} SPD=opteed Other dependencies: ------------------ * mbed_tls: git@github.com:ARMmbed/mbedtls.git [devel] Merge: 68dbc94 f34a4c1 Author: Simon Butcher <simon.butcher@arm.com> Date: Thu Aug 30 00:57:28 2018 +0100 * optee_os: https://github.com/BayLibre/optee_os Until it gets merged into OP-TEE, the port requires Renesas' Trusted Environment with a modification to support power management. Author: Jorge Ramirez-Ortiz <jramirez@baylibre.com> Date: Thu Aug 30 16:49:49 2018 +0200 plat-rcar: cpu-suspend: handle the power level Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com> * u-boot: The port has beent tested using mainline uboot. Author: Fabio Estevam <festevam@gmail.com> Date: Tue Sep 4 10:23:12 2018 -0300 *linux: The port has beent tested using mainline kernel. Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Sun Sep 16 11:52:37 2018 -0700 Linux 4.19-rc4 Overview --------- BOOTROM starts the cpu at EL3; In this port BL2 will therefore be entered at this exception level (the Renesas' ATF reference tree [1] resets into EL1 before entering BL2 - see its bl2.ld.S) BL2 initializes DDR (and i2c to talk to the PMIC on some platforms) before determining the boot reason (cold or warm). During suspend all CPUs are switched off and the DDR is put in backup mode (some kind of self-refresh mode). This means that BL2 is always entered in a cold boot scenario. Once BL2 boots, it determines the boot reason, writes it to shared memory (BOOT_KIND_BASE) together with the BL31 parameters (PARAMS_BASE) and jumps to BL31. To all effects, BL31 is as if it is being entered in reset mode since it still needs to initialize the rest of the cores; this is the reason behind using direct shared memory access to BOOT_KIND_BASE and PARAMS_BASE instead of using registers to get to those locations (see el3_common_macros.S and bl31_entrypoint.S for the RESET_TO_BL31 use case). Depending on the boot reason BL31 initializes the rest of the cores: in case of suspend, it uses a MBOX memory region to recover the program counters. [1] https://github.com/renesas-rcar/arm-trusted-firmware Tests ----- * cpuidle ------- enable kernel's cpuidle arm_idle driver and boot * system suspend -------------- $ cat suspend.sh #!/bin/bash i2cset -f -y 7 0x30 0x20 0x0F read -p "Switch off SW23 and press return " foo echo mem > /sys/power/state * cpu hotplug: ------------ $ cat offline.sh #!/bin/bash nbr=$1 echo 0 > /sys/devices/system/cpu/cpu$nbr/online printf "ONLINE: " && cat /sys/devices/system/cpu/online printf "OFFLINE: " && cat /sys/devices/system/cpu/offline $ cat online.sh #!/bin/bash nbr=$1 echo 1 > /sys/devices/system/cpu/cpu$nbr/online printf "ONLINE: " && cat /sys/devices/system/cpu/online printf "OFFLINE: " && cat /sys/devices/system/cpu/offline Signed-off-by: ldts <jramirez@baylibre.com>
6 years ago
/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common/bl_common.h>
#include <common/desc_image_load.h>
#include <plat/common/platform.h>
rcar-gen3: initial commit for the rcar-gen3 boards Reference code: ============== rar_gen3: IPL and Secure Monitor Rev1.0.22 https://github.com/renesas-rcar/arm-trusted-firmware [rcar_gen3] Author: Takuya Sakata &lt;takuya.sakata.wz@bp.renesas.com&gt; Date: Thu Aug 30 21:26:41 2018 +0900 Update IPL and Secure Monitor Rev1.0.22 General Information: =================== This port has been tested on the Salvator-X Soc_id r8a7795 revision ES1.1 (uses an SPD). Build Tested: ------------- ATFW_OPT=&#34;LSI=H3 RCAR_DRAM_SPLIT=1 RCAR_LOSSY_ENABLE=1&#34; MBEDTLS_DIR=$mbedtls $ make clean bl2 bl31 rcar PLAT=rcar ${ATFW_OPT} SPD=opteed Other dependencies: ------------------ * mbed_tls: git@github.com:ARMmbed/mbedtls.git [devel] Merge: 68dbc94 f34a4c1 Author: Simon Butcher &lt;simon.butcher@arm.com&gt; Date: Thu Aug 30 00:57:28 2018 +0100 * optee_os: https://github.com/BayLibre/optee_os Until it gets merged into OP-TEE, the port requires Renesas&#39; Trusted Environment with a modification to support power management. Author: Jorge Ramirez-Ortiz &lt;jramirez@baylibre.com&gt; Date: Thu Aug 30 16:49:49 2018 +0200 plat-rcar: cpu-suspend: handle the power level Signed-off-by: Jorge Ramirez-Ortiz &lt;jramirez@baylibre.com&gt; * u-boot: The port has beent tested using mainline uboot. Author: Fabio Estevam &lt;festevam@gmail.com&gt; Date: Tue Sep 4 10:23:12 2018 -0300 *linux: The port has beent tested using mainline kernel. Author: Linus Torvalds &lt;torvalds@linux-foundation.org&gt; Date: Sun Sep 16 11:52:37 2018 -0700 Linux 4.19-rc4 Overview --------- BOOTROM starts the cpu at EL3; In this port BL2 will therefore be entered at this exception level (the Renesas&#39; ATF reference tree [1] resets into EL1 before entering BL2 - see its bl2.ld.S) BL2 initializes DDR (and i2c to talk to the PMIC on some platforms) before determining the boot reason (cold or warm). During suspend all CPUs are switched off and the DDR is put in backup mode (some kind of self-refresh mode). This means that BL2 is always entered in a cold boot scenario. Once BL2 boots, it determines the boot reason, writes it to shared memory (BOOT_KIND_BASE) together with the BL31 parameters (PARAMS_BASE) and jumps to BL31. To all effects, BL31 is as if it is being entered in reset mode since it still needs to initialize the rest of the cores; this is the reason behind using direct shared memory access to BOOT_KIND_BASE and PARAMS_BASE instead of using registers to get to those locations (see el3_common_macros.S and bl31_entrypoint.S for the RESET_TO_BL31 use case). Depending on the boot reason BL31 initializes the rest of the cores: in case of suspend, it uses a MBOX memory region to recover the program counters. [1] https://github.com/renesas-rcar/arm-trusted-firmware Tests ----- * cpuidle ------- enable kernel&#39;s cpuidle arm_idle driver and boot * system suspend -------------- $ cat suspend.sh #!/bin/bash i2cset -f -y 7 0x30 0x20 0x0F read -p &#34;Switch off SW23 and press return &#34; foo echo mem &gt; /sys/power/state * cpu hotplug: ------------ $ cat offline.sh #!/bin/bash nbr=$1 echo 0 &gt; /sys/devices/system/cpu/cpu$nbr/online printf &#34;ONLINE: &#34; &amp;&amp; cat /sys/devices/system/cpu/online printf &#34;OFFLINE: &#34; &amp;&amp; cat /sys/devices/system/cpu/offline $ cat online.sh #!/bin/bash nbr=$1 echo 1 &gt; /sys/devices/system/cpu/cpu$nbr/online printf &#34;ONLINE: &#34; &amp;&amp; cat /sys/devices/system/cpu/online printf &#34;OFFLINE: &#34; &amp;&amp; cat /sys/devices/system/cpu/offline Signed-off-by: ldts &lt;jramirez@baylibre.com&gt;
6 years ago
extern void bl2_plat_flush_bl31_params(void);
/*******************************************************************************
* This function flushes the data structures so that they are visible
* in memory for the next BL image.
******************************************************************************/
void plat_flush_next_bl_params(void)
{
#if IMAGE_BL2
bl2_plat_flush_bl31_params();
#endif
}
/*******************************************************************************
* This function returns the list of loadable images.
******************************************************************************/
bl_load_info_t *plat_get_bl_image_load_info(void)
{
return get_bl_load_info_from_mem_params_desc();
}
/*******************************************************************************
* This function returns the list of executable images.
******************************************************************************/
bl_params_t *plat_get_next_bl_params(void)
{
return get_next_bl_params_from_mem_params_desc();
}