Rename GICv3 interrupt group macros

This patch renames the GICv3 interrupt group macros from
INT_TYPE_G0, INT_TYPE_G1S and INT_TYPE_G1NS to INTR_GROUP0,
INTR_GROUP1S and INTR_GROUP1NS respectively.

Change-Id: I40c66f589ce6234fa42205adcd91f7d6ad8f33d4

drivers/arm/gic/v3/gicv3_helpers.c

@@ -312,7 +312,7 @@ void gicv3_secure_spis_configure(uintptr_t gicd_base,
 	unsigned int index, irq_num;
 	uint64_t gic_affinity_val;
 
-	assert((int_grp == INT_TYPE_G1S) || (int_grp == INT_TYPE_G0));
+	assert((int_grp == INTR_GROUP1S) || (int_grp == INTR_GROUP0));
 	/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
 	assert(num_ints ? (uintptr_t)sec_intr_list : 1);
 
@@ -324,7 +324,7 @@ void gicv3_secure_spis_configure(uintptr_t gicd_base,
 			gicd_clr_igroupr(gicd_base, irq_num);
 
 			/* Configure this interrupt as G0 or a G1S interrupt */
-			if (int_grp == INT_TYPE_G1S)
+			if (int_grp == INTR_GROUP1S)
 				gicd_set_igrpmodr(gicd_base, irq_num);
 			else
 				gicd_clr_igrpmodr(gicd_base, irq_num);
@@ -386,7 +386,7 @@ void gicv3_secure_ppi_sgi_configure(uintptr_t gicr_base,
 {
 	unsigned int index, irq_num;
 
-	assert((int_grp == INT_TYPE_G1S) || (int_grp == INT_TYPE_G0));
+	assert((int_grp == INTR_GROUP1S) || (int_grp == INTR_GROUP0));
 	/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
 	assert(num_ints ? (uintptr_t)sec_intr_list : 1);
 
@@ -398,7 +398,7 @@ void gicv3_secure_ppi_sgi_configure(uintptr_t gicr_base,
 			gicr_clr_igroupr0(gicr_base, irq_num);
 
 			/* Configure this interrupt as G0 or a G1S interrupt */
-			if (int_grp == INT_TYPE_G1S)
+			if (int_grp == INTR_GROUP1S)
 				gicr_set_igrpmodr0(gicr_base, irq_num);
 			else
 				gicr_clr_igrpmodr0(gicr_base, irq_num);

drivers/arm/gic/v3/gicv3_main.c

@@ -144,13 +144,13 @@ void gicv3_distif_init(void)
 	gicv3_secure_spis_configure(driver_data->gicd_base,
 					driver_data->g1s_interrupt_num,
 					driver_data->g1s_interrupt_array,
-					INT_TYPE_G1S);
+					INTR_GROUP1S);
 
 	/* Configure the G0 SPIs */
 	gicv3_secure_spis_configure(driver_data->gicd_base,
 					driver_data->g0_interrupt_num,
 					driver_data->g0_interrupt_array,
-					INT_TYPE_G0);
+					INTR_GROUP0);
 
 	/* Enable the secure SPIs now that they have been configured */
 	gicd_set_ctlr(driver_data->gicd_base,
@@ -186,13 +186,13 @@ void gicv3_rdistif_init(unsigned int proc_num)
 	gicv3_secure_ppi_sgi_configure(gicr_base,
 					   driver_data->g1s_interrupt_num,
 					   driver_data->g1s_interrupt_array,
-					   INT_TYPE_G1S);
+					   INTR_GROUP1S);
 
 	/* Configure the G0 SGIs/PPIs */
 	gicv3_secure_ppi_sgi_configure(gicr_base,
 					   driver_data->g0_interrupt_num,
 					   driver_data->g0_interrupt_array,
-					   INT_TYPE_G0);
+					   INTR_GROUP0);
 }
 
 /*******************************************************************************
@@ -332,9 +332,9 @@ unsigned int gicv3_get_pending_interrupt_type(void)
  * this interrupt has been configured under by the interrupt controller i.e.
  * group0 or group1 Secure / Non Secure. The return value can be one of the
  * following :
- *    INT_TYPE_G0  : The interrupt type is a Secure Group 0 interrupt
- *    INT_TYPE_G1S : The interrupt type is a Secure Group 1 secure interrupt
- *    INT_TYPE_G1NS: The interrupt type is a Secure Group 1 non secure
+ *    INTR_GROUP0  : The interrupt type is a Secure Group 0 interrupt
+ *    INTR_GROUP1S : The interrupt type is a Secure Group 1 secure interrupt
+ *    INTR_GROUP1NS: The interrupt type is a Secure Group 1 non secure
  *                   interrupt.
  ******************************************************************************/
 unsigned int gicv3_get_interrupt_type(unsigned int id,
@@ -352,7 +352,7 @@ unsigned int gicv3_get_interrupt_type(unsigned int id,
 
 	/* All LPI interrupts are Group 1 non secure */
 	if (id >= MIN_LPI_ID)
-		return INT_TYPE_G1NS;
+		return INTR_GROUP1NS;
 
 	if (id < MIN_SPI_ID) {
 		assert(driver_data->rdistif_base_addrs);
@@ -370,12 +370,12 @@ unsigned int gicv3_get_interrupt_type(unsigned int id,
 	 * interrupt
 	 */
 	if (igroup)
-		return INT_TYPE_G1NS;
+		return INTR_GROUP1NS;
 
 	/* If the GRPMOD bit is set, then it is a Group 1 Secure interrupt */
 	if (grpmodr)
-		return INT_TYPE_G1S;
+		return INTR_GROUP1S;
 
 	/* Else it is a Group 0 Secure interrupt */
-	return INT_TYPE_G0;
+	return INTR_GROUP0;
 }

include/drivers/arm/gicv3.h

@@ -35,9 +35,9 @@
  * GICv3 miscellaneous definitions
  ******************************************************************************/
 /* Interrupt group definitions */
-#define INT_TYPE_G1S		0
-#define INT_TYPE_G0		1
-#define INT_TYPE_G1NS		2
+#define INTR_GROUP1S		0
+#define INTR_GROUP0		1
+#define INTR_GROUP1NS		2
 
 /* Interrupt IDs reported by the HPPIR and IAR registers */
 #define PENDING_G1S_INTID	1020