Browse Source
* changes: docs(layerscape): add ls1088a soc and board support feat(ls1088aqds): add ls1088aqds board support feat(ls1088ardb): add ls1088ardb board support feat(ls1088a): add new SoC platform ls1088a build(changelog): add new scopes for ls1088a feat(bl2): add support to separate no-loadable sections refactor(layerscape): refine comparison of inerconnection feat(layerscape): add soc helper macro definition for chassis 3 feat(nxp-gic): add some macros definition for gicv3 feat(layerscape): add CHASSIS 3 support for tbbr feat(layerscape): define more chassis 3 hardware address feat(nxp-crypto): add chassis 3 support feat(nxp-dcfg): add Chassis 3 support feat(lx2): enable DDR erratas for lx2 platforms feat(layerscape): print DDR errata information feat(nxp-ddr): add workaround for errata A050958 feat(layerscape): add new soc errata a010539 support feat(layerscape): add new soc errata a009660 support feat(nxp-ddr): add rawcard 1F support fix(layerscape): fix build issue of mmap_add_ddr_region_dynamically fix(nxp-tools): fix create_pbl print log build(changelog): add new scopes for NXP driverpull/1985/head
Joanna Farley
3 years ago
committed by
TrustedFirmware Code Review
TrustedFirmware Code Review
47 changed files with 3596 additions and 56 deletions
@ -0,0 +1,98 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
#ifndef SOC_DEFAULT_HELPER_MACROS_H |
||||
|
#define SOC_DEFAULT_HELPER_MACROS_H |
||||
|
|
||||
|
#ifdef NXP_OCRAM_TZPC_ADDR |
||||
|
#define TZPC_BLOCK_SIZE 0x1000 |
||||
|
#endif |
||||
|
|
||||
|
/* Reset block register offsets */ |
||||
|
#ifdef NXP_RESET_ADDR |
||||
|
|
||||
|
/* Register Offset */ |
||||
|
#define RST_RSTCR_OFFSET 0x0 |
||||
|
#define RST_RSTRQMR1_OFFSET 0x10 |
||||
|
#define RST_RSTRQSR1_OFFSET 0x18 |
||||
|
#define BRR_OFFSET 0x60 |
||||
|
|
||||
|
/* helper macros */ |
||||
|
#define RSTRQMR_RPTOE_MASK (1 << 19) |
||||
|
#endif /* NXP_RESET_ADDR */ |
||||
|
|
||||
|
#define PCIeRC_RN_I_NODE_ID_OFFSET 0x8 |
||||
|
#define PoS_CONTROL_REG_OFFSET 0x0 |
||||
|
#define POS_EARLY_WR_COMP_EN 0x20 |
||||
|
#define HNI_POS_EN 0x01 |
||||
|
#define POS_TERMINATE_BARRIERS 0x10 |
||||
|
#define SERIALIZE_DEV_nGnRnE_WRITES 0x200 |
||||
|
#define ENABLE_ERR_SIGNAL_TO_MN 0x4 |
||||
|
#define ENABLE_RESERVE_BIT53 0x400 |
||||
|
#define ENABLE_WUO 0x10 |
||||
|
|
||||
|
#define PORT_S0_CTRL_REG_RNI 0x010 |
||||
|
#define PORT_S1_CTRL_REG_RNI 0x110 |
||||
|
#define PORT_S2_CTRL_REG_RNI 0x210 |
||||
|
#define ENABLE_FORCE_RD_QUO 0x20 |
||||
|
#define QOS_SETTING 0x00FF000C |
||||
|
|
||||
|
/* epu register offsets and values */ |
||||
|
#define EPU_EPGCR_OFFSET 0x0 |
||||
|
#define EPU_EPIMCR10_OFFSET 0x128 |
||||
|
#define EPU_EPCTR10_OFFSET 0xa28 |
||||
|
#define EPU_EPCCR10_OFFSET 0x828 |
||||
|
#ifndef EPU_EPCCR10_VAL |
||||
|
#define EPU_EPCCR10_VAL 0xb2800000 |
||||
|
#endif |
||||
|
#define EPU_EPIMCR10_VAL 0xba000000 |
||||
|
#define EPU_EPCTR10_VAL 0x0 |
||||
|
#define EPU_EPGCR_VAL (1 << 31) |
||||
|
|
||||
|
#ifdef NXP_CCN_ADDR |
||||
|
#define NXP_CCN_HN_F_1_ADDR 0x04210000 |
||||
|
|
||||
|
#define CCN_HN_F_SAM_NODEID_MASK 0x7f |
||||
|
#define CCN_HN_F_SNP_DMN_CTL_OFFSET 0x200 |
||||
|
#define CCN_HN_F_SNP_DMN_CTL_SET_OFFSET 0x210 |
||||
|
#define CCN_HN_F_SNP_DMN_CTL_CLR_OFFSET 0x220 |
||||
|
#define CCN_HN_F_SNP_DMN_CTL_MASK 0x80a00 |
||||
|
#define CCN_HNF_NODE_COUNT 8 |
||||
|
#define CCN_HNF_OFFSET 0x10000 |
||||
|
|
||||
|
#define SA_AUX_CTRL_REG_OFFSET 0x500 |
||||
|
#define NUM_HNI_NODE 2 |
||||
|
#define CCN_HNI_MEMORY_MAP_SIZE 0x10000 |
||||
|
|
||||
|
#define PCIeRC_RN_I_NODE_ID_OFFSET 0x8 |
||||
|
#define PoS_CONTROL_REG_OFFSET 0x0 |
||||
|
#define POS_EARLY_WR_COMP_EN 0x20 |
||||
|
#define HNI_POS_EN 0x01 |
||||
|
#define POS_TERMINATE_BARRIERS 0x10 |
||||
|
#define SERIALIZE_DEV_nGnRnE_WRITES 0x200 |
||||
|
#define ENABLE_ERR_SIGNAL_TO_MN 0x4 |
||||
|
#define ENABLE_RESERVE_BIT53 0x400 |
||||
|
#define ENABLE_WUO 0x10 |
||||
|
#endif |
||||
|
|
||||
|
/* reset register bit */ |
||||
|
#define RSTRQMR_RPTOE_MASK (1 << 19) |
||||
|
|
||||
|
/* secmon register offsets and bitfields */ |
||||
|
#define SECMON_HPCOMR_OFFSET 0x4 |
||||
|
#define SECMON_HPCOMR_NPSWAEN 0x80000000 |
||||
|
|
||||
|
/* Secure-Register-File register offsets and bit masks */ |
||||
|
#ifdef NXP_RST_ADDR |
||||
|
/* Register Offset */ |
||||
|
#define CORE_HOLD_OFFSET 0x140 |
||||
|
#endif |
||||
|
|
||||
|
#define DCFG_SBEESR2_ADDR 0x00100534 |
||||
|
#define DCFG_MBEESR2_ADDR 0x00100544 |
||||
|
/* SBEESR and MBEESR bit mask */ |
||||
|
#define OCRAM_EESR_MASK 0x00000008 |
||||
|
|
||||
|
#endif /* SOC_DEFAULT_HELPER_MACROS_H */ |
||||
@ -0,0 +1,14 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
* |
||||
|
*/ |
||||
|
|
||||
|
#include <mmio.h> |
||||
|
#include <soc_default_base_addr.h> |
||||
|
|
||||
|
void erratum_a009660(void) |
||||
|
{ |
||||
|
mmio_write_32(NXP_SCFG_ADDR + 0x20c, 0x63b20042); |
||||
|
} |
||||
@ -0,0 +1,26 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
* |
||||
|
*/ |
||||
|
|
||||
|
#include <mmio.h> |
||||
|
|
||||
|
#include <plat_common.h> |
||||
|
|
||||
|
void erratum_a010539(void) |
||||
|
{ |
||||
|
if (get_boot_dev() == BOOT_DEVICE_QSPI) { |
||||
|
unsigned int *porsr1 = (void *)(NXP_DCFG_ADDR + |
||||
|
DCFG_PORSR1_OFFSET); |
||||
|
uint32_t val; |
||||
|
|
||||
|
val = (gur_in32(porsr1) & ~PORSR1_RCW_MASK); |
||||
|
mmio_write_32((uint32_t)(NXP_DCSR_DCFG_ADDR + |
||||
|
DCFG_DCSR_PORCR1_OFFSET), htobe32(val)); |
||||
|
/* Erratum need to set '1' to all bits for reserved SCFG register 0x1a8 */ |
||||
|
mmio_write_32((uint32_t)(NXP_SCFG_ADDR + 0x1a8), |
||||
|
htobe32(0xffffffff)); |
||||
|
} |
||||
|
} |
||||
File diff suppressed because it is too large
@ -0,0 +1,69 @@ |
|||||
|
/* |
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#include <arch.h> |
||||
|
#include <asm_macros.S> |
||||
|
#include <platform_def.h> |
||||
|
|
||||
|
.globl plat_secondary_cold_boot_setup |
||||
|
.globl plat_is_my_cpu_primary |
||||
|
.globl plat_reset_handler |
||||
|
.globl platform_mem_init |
||||
|
|
||||
|
func platform_mem1_init |
||||
|
ret |
||||
|
endfunc platform_mem1_init |
||||
|
|
||||
|
func platform_mem_init |
||||
|
ret |
||||
|
endfunc platform_mem_init |
||||
|
|
||||
|
func apply_platform_errata |
||||
|
ret |
||||
|
endfunc apply_platform_errata |
||||
|
|
||||
|
func plat_reset_handler |
||||
|
mov x29, x30 |
||||
|
bl apply_platform_errata |
||||
|
|
||||
|
#if defined(IMAGE_BL31) |
||||
|
ldr x0, =POLICY_SMMU_PAGESZ_64K |
||||
|
cbz x0, 1f |
||||
|
/* Set the SMMU page size in the sACR register */ |
||||
|
bl _set_smmu_pagesz_64 |
||||
|
#endif |
||||
|
1: |
||||
|
mov x30, x29 |
||||
|
ret |
||||
|
endfunc plat_reset_handler |
||||
|
|
||||
|
/* |
||||
|
* void plat_secondary_cold_boot_setup (void); |
||||
|
* |
||||
|
* This function performs any platform specific actions |
||||
|
* needed for a secondary cpu after a cold reset e.g |
||||
|
* mark the cpu's presence, mechanism to place it in a |
||||
|
* holding pen etc. |
||||
|
*/ |
||||
|
func plat_secondary_cold_boot_setup |
||||
|
/* ls1088a does not do cold boot for secondary CPU */ |
||||
|
cb_panic: |
||||
|
b cb_panic |
||||
|
endfunc plat_secondary_cold_boot_setup |
||||
|
|
||||
|
/* |
||||
|
* unsigned int plat_is_my_cpu_primary (void); |
||||
|
* |
||||
|
* Find out whether the current cpu is the primary |
||||
|
* cpu. |
||||
|
*/ |
||||
|
func plat_is_my_cpu_primary |
||||
|
mrs x0, mpidr_el1 |
||||
|
and x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK) |
||||
|
cmp x0, 0x0 |
||||
|
cset w0, eq |
||||
|
ret |
||||
|
endfunc plat_is_my_cpu_primary |
||||
@ -0,0 +1,229 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#ifndef SOC_H |
||||
|
#define SOC_H |
||||
|
|
||||
|
/* Chassis specific defines - common across SoC's of a particular platform */ |
||||
|
#include "dcfg_lsch3.h" |
||||
|
#include "soc_default_base_addr.h" |
||||
|
#include "soc_default_helper_macros.h" |
||||
|
|
||||
|
/*
|
||||
|
* SVR Definition of LS1088A |
||||
|
* A: without security |
||||
|
* AE: with security |
||||
|
* (not include major and minor rev) |
||||
|
*/ |
||||
|
#define SVR_LS1044A 0x870323 |
||||
|
#define SVR_LS1044AE 0x870322 |
||||
|
#define SVR_LS1048A 0x870321 |
||||
|
#define SVR_LS1048AE 0x870320 |
||||
|
#define SVR_LS1084A 0x870303 |
||||
|
#define SVR_LS1084AE 0x870302 |
||||
|
#define SVR_LS1088A 0x870301 |
||||
|
#define SVR_LS1088AE 0x870300 |
||||
|
|
||||
|
#define SVR_WO_E 0xFFFFFE |
||||
|
|
||||
|
/* Number of cores in platform */ |
||||
|
#define NUMBER_OF_CLUSTERS 2 |
||||
|
#define CORES_PER_CLUSTER 4 |
||||
|
#define PLATFORM_CORE_COUNT (NUMBER_OF_CLUSTERS * CORES_PER_CLUSTER) |
||||
|
|
||||
|
/* set to 0 if the clusters are not symmetrical */ |
||||
|
#define SYMMETRICAL_CLUSTERS 1 |
||||
|
|
||||
|
|
||||
|
#define NUM_DRAM_REGIONS 2 |
||||
|
#define NXP_DRAM0_ADDR 0x80000000 |
||||
|
#define NXP_DRAM0_MAX_SIZE 0x80000000 /* 2 GB */ |
||||
|
|
||||
|
#define NXP_DRAM1_ADDR 0x8080000000 |
||||
|
#define NXP_DRAM1_MAX_SIZE 0x7F80000000 /* 510 G */ |
||||
|
|
||||
|
/* DRAM0 Size defined in platform_def.h */ |
||||
|
#define NXP_DRAM0_SIZE PLAT_DEF_DRAM0_SIZE |
||||
|
|
||||
|
#define NXP_POWMGTDCR 0x700123C20 |
||||
|
|
||||
|
/* epu register offsets and values */ |
||||
|
#define EPU_EPGCR_OFFSET 0x0 |
||||
|
#define EPU_EPIMCR10_OFFSET 0x128 |
||||
|
#define EPU_EPCTR10_OFFSET 0xa28 |
||||
|
#define EPU_EPCCR10_OFFSET 0x828 |
||||
|
|
||||
|
#ifdef EPU_EPCCR10_VAL |
||||
|
#undef EPU_EPCCR10_VAL |
||||
|
#endif |
||||
|
#define EPU_EPCCR10_VAL 0xf2800000 |
||||
|
|
||||
|
#define EPU_EPIMCR10_VAL 0xba000000 |
||||
|
#define EPU_EPCTR10_VAL 0x0 |
||||
|
#define EPU_EPGCR_VAL (1 << 31) |
||||
|
|
||||
|
/* pmu register offsets and values */ |
||||
|
#define PMU_PCPW20SR_OFFSET 0x830 |
||||
|
#define PMU_CLAINACTSETR_OFFSET 0x1100 |
||||
|
#define PMU_CLAINACTCLRR_OFFSET 0x1104 |
||||
|
#define PMU_CLSINACTSETR_OFFSET 0x1108 |
||||
|
#define PMU_CLSINACTCLRR_OFFSET 0x110C |
||||
|
#define PMU_CLL2FLUSHSETR_OFFSET 0x1110 |
||||
|
#define PMU_CLSL2FLUSHCLRR_OFFSET 0x1114 |
||||
|
#define PMU_CLL2FLUSHSR_OFFSET 0x1118 |
||||
|
#define PMU_POWMGTCSR_OFFSET 0x4000 |
||||
|
#define PMU_IPPDEXPCR0_OFFSET 0x4040 |
||||
|
#define PMU_IPPDEXPCR1_OFFSET 0x4044 |
||||
|
#define PMU_IPPDEXPCR2_OFFSET 0x4048 |
||||
|
#define PMU_IPPDEXPCR3_OFFSET 0x404C |
||||
|
#define PMU_IPPDEXPCR4_OFFSET 0x4050 |
||||
|
#define PMU_IPPDEXPCR5_OFFSET 0x4054 |
||||
|
#define PMU_IPSTPCR0_OFFSET 0x4120 |
||||
|
#define PMU_IPSTPCR1_OFFSET 0x4124 |
||||
|
#define PMU_IPSTPCR2_OFFSET 0x4128 |
||||
|
#define PMU_IPSTPCR3_OFFSET 0x412C |
||||
|
#define PMU_IPSTPCR4_OFFSET 0x4130 |
||||
|
#define PMU_IPSTPCR5_OFFSET 0x4134 |
||||
|
#define PMU_IPSTPCR6_OFFSET 0x4138 |
||||
|
#define PMU_IPSTPACK0_OFFSET 0x4140 |
||||
|
#define PMU_IPSTPACK1_OFFSET 0x4144 |
||||
|
#define PMU_IPSTPACK2_OFFSET 0x4148 |
||||
|
#define PMU_IPSTPACK3_OFFSET 0x414C |
||||
|
#define PMU_IPSTPACK4_OFFSET 0x4150 |
||||
|
#define PMU_IPSTPACK5_OFFSET 0x4154 |
||||
|
#define PMU_IPSTPACK6_OFFSET 0x4158 |
||||
|
#define PMU_POWMGTCSR_VAL (1 << 20) |
||||
|
|
||||
|
#define IPPDEXPCR0_MASK 0xFFFFFFFF |
||||
|
#define IPPDEXPCR1_MASK 0xFFFFFFFF |
||||
|
#define IPPDEXPCR2_MASK 0xFFFFFFFF |
||||
|
#define IPPDEXPCR3_MASK 0xFFFFFFFF |
||||
|
#define IPPDEXPCR4_MASK 0xFFFFFFFF |
||||
|
#define IPPDEXPCR5_MASK 0xFFFFFFFF |
||||
|
|
||||
|
/* DEVDISR5_FLX_TMR */ |
||||
|
#define IPPDEXPCR_FLX_TMR 0x00004000 |
||||
|
#define DEVDISR5_FLX_TMR 0x00004000 |
||||
|
|
||||
|
#define IPSTPCR0_VALUE 0x0041310C |
||||
|
#define IPSTPCR1_VALUE 0x000003FF |
||||
|
#define IPSTPCR2_VALUE 0x00013006 |
||||
|
|
||||
|
/* Dont' stop UART */ |
||||
|
#define IPSTPCR3_VALUE 0x0000033A |
||||
|
|
||||
|
#define IPSTPCR4_VALUE 0x00103300 |
||||
|
#define IPSTPCR5_VALUE 0x00000001 |
||||
|
#define IPSTPCR6_VALUE 0x00000000 |
||||
|
|
||||
|
|
||||
|
#define TZPC_BLOCK_SIZE 0x1000 |
||||
|
|
||||
|
/* PORSR1 */ |
||||
|
#define PORSR1_RCW_MASK 0xFF800000 |
||||
|
#define PORSR1_RCW_SHIFT 23 |
||||
|
|
||||
|
/* CFG_RCW_SRC[6:0] */ |
||||
|
#define RCW_SRC_TYPE_MASK 0x70 |
||||
|
|
||||
|
/* RCW SRC NOR */ |
||||
|
#define NOR_16B_VAL 0x20 |
||||
|
|
||||
|
/*
|
||||
|
* RCW SRC Serial Flash |
||||
|
* 1. SERAIL NOR (QSPI) |
||||
|
* 2. OTHERS (SD/MMC, SPI, I2C1) |
||||
|
*/ |
||||
|
#define RCW_SRC_SERIAL_MASK 0x7F |
||||
|
#define QSPI_VAL 0x62 |
||||
|
#define SDHC_VAL 0x40 |
||||
|
#define EMMC_VAL 0x41 |
||||
|
|
||||
|
/*
|
||||
|
* Required LS standard platform porting definitions |
||||
|
* for CCN-504 - Read from RN-F node ID register |
||||
|
*/ |
||||
|
#define PLAT_CLUSTER_TO_CCN_ID_MAP 1, 9, 11, 19 |
||||
|
|
||||
|
/* Defines required for using XLAT tables from ARM common code */ |
||||
|
#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 40) |
||||
|
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 40) |
||||
|
|
||||
|
/*
|
||||
|
* Clock Divisors |
||||
|
*/ |
||||
|
#define NXP_PLATFORM_CLK_DIVIDER 1 |
||||
|
#define NXP_UART_CLK_DIVIDER 2 |
||||
|
|
||||
|
/* dcfg register offsets and values */ |
||||
|
#define DCFG_DEVDISR1_OFFSET 0x70 |
||||
|
#define DCFG_DEVDISR2_OFFSET 0x74 |
||||
|
#define DCFG_DEVDISR3_OFFSET 0x78 |
||||
|
#define DCFG_DEVDISR5_OFFSET 0x80 |
||||
|
#define DCFG_DEVDISR6_OFFSET 0x84 |
||||
|
|
||||
|
#define DCFG_DEVDISR1_SEC (1 << 22) |
||||
|
#define DCFG_DEVDISR3_QBMAIN (1 << 12) |
||||
|
#define DCFG_DEVDISR4_SPI_QSPI (1 << 4 | 1 << 5) |
||||
|
#define DCFG_DEVDISR5_MEM (1 << 0) |
||||
|
|
||||
|
#define DEVDISR1_VALUE 0x0041310c |
||||
|
#define DEVDISR2_VALUE 0x000003ff |
||||
|
#define DEVDISR3_VALUE 0x00013006 |
||||
|
#define DEVDISR4_VALUE 0x0000033e |
||||
|
#define DEVDISR5_VALUE 0x00103300 |
||||
|
#define DEVDISR6_VALUE 0x00000001 |
||||
|
|
||||
|
/*
|
||||
|
* pwr mgmt features supported in the soc-specific code: |
||||
|
* value == 0x0, the soc code does not support this feature |
||||
|
* value != 0x0, the soc code supports this feature |
||||
|
*/ |
||||
|
#define SOC_CORE_RELEASE 0x1 |
||||
|
#define SOC_CORE_RESTART 0x1 |
||||
|
#define SOC_CORE_OFF 0x1 |
||||
|
#define SOC_CORE_STANDBY 0x1 |
||||
|
#define SOC_CORE_PWR_DWN 0x1 |
||||
|
#define SOC_CLUSTER_STANDBY 0x1 |
||||
|
#define SOC_CLUSTER_PWR_DWN 0x1 |
||||
|
#define SOC_SYSTEM_STANDBY 0x1 |
||||
|
#define SOC_SYSTEM_PWR_DWN 0x1 |
||||
|
#define SOC_SYSTEM_OFF 0x1 |
||||
|
#define SOC_SYSTEM_RESET 0x1 |
||||
|
|
||||
|
#define SYSTEM_PWR_DOMAINS 1 |
||||
|
#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CORE_COUNT + \ |
||||
|
NUMBER_OF_CLUSTERS + \ |
||||
|
SYSTEM_PWR_DOMAINS) |
||||
|
|
||||
|
/* Power state coordination occurs at the system level */ |
||||
|
#define PLAT_PD_COORD_LVL MPIDR_AFFLVL2 |
||||
|
#define PLAT_MAX_PWR_LVL PLAT_PD_COORD_LVL |
||||
|
|
||||
|
/* Local power state for power domains in Run state */ |
||||
|
#define LS_LOCAL_STATE_RUN PSCI_LOCAL_STATE_RUN |
||||
|
|
||||
|
/* define retention state */ |
||||
|
#define PLAT_MAX_RET_STATE (PSCI_LOCAL_STATE_RUN + 1) |
||||
|
#define LS_LOCAL_STATE_RET PLAT_MAX_RET_STATE |
||||
|
|
||||
|
/* define power-down state */ |
||||
|
#define PLAT_MAX_OFF_STATE (PLAT_MAX_RET_STATE + 1) |
||||
|
#define LS_LOCAL_STATE_OFF PLAT_MAX_OFF_STATE |
||||
|
|
||||
|
#ifndef __ASSEMBLER__ |
||||
|
/* CCI slave interfaces */ |
||||
|
static const int cci_map[] = { |
||||
|
3, |
||||
|
4, |
||||
|
}; |
||||
|
void soc_init_lowlevel(void); |
||||
|
void soc_init_percpu(void); |
||||
|
void _soc_set_start_addr(unsigned long addr); |
||||
|
void _set_platform_security(void); |
||||
|
#endif |
||||
|
|
||||
|
#endif /* SOC_H */ |
||||
@ -0,0 +1,84 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#include <errno.h> |
||||
|
|
||||
|
#include <common/debug.h> |
||||
|
#include <ddr.h> |
||||
|
#include <utils.h> |
||||
|
|
||||
|
#include <errata.h> |
||||
|
#include <platform_def.h> |
||||
|
|
||||
|
#ifdef CONFIG_STATIC_DDR |
||||
|
#error No static value defined |
||||
|
#endif |
||||
|
|
||||
|
static const struct rc_timing rce[] = { |
||||
|
{U(1600), U(8), U(8)}, |
||||
|
{U(1867), U(8), U(8)}, |
||||
|
{U(2134), U(8), U(9)}, |
||||
|
{} |
||||
|
}; |
||||
|
|
||||
|
static const struct board_timing udimm[] = { |
||||
|
{U(0x04), rce, U(0x01020307), U(0x08090b06)}, |
||||
|
}; |
||||
|
|
||||
|
int ddr_board_options(struct ddr_info *priv) |
||||
|
{ |
||||
|
int ret; |
||||
|
struct memctl_opt *popts = &priv->opt; |
||||
|
|
||||
|
if (popts->rdimm != 0) { |
||||
|
debug("RDIMM parameters not set.\n"); |
||||
|
return -EINVAL; |
||||
|
} |
||||
|
|
||||
|
ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm)); |
||||
|
if (ret != 0) { |
||||
|
return ret; |
||||
|
} |
||||
|
|
||||
|
popts->addr_hash = 1; |
||||
|
popts->cpo_sample = U(0x7b); |
||||
|
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | |
||||
|
DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); |
||||
|
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | |
||||
|
DDR_CDR2_VREF_TRAIN_EN | |
||||
|
DDR_CDR2_VREF_RANGE_2; |
||||
|
|
||||
|
return 0; |
||||
|
} |
||||
|
|
||||
|
long long init_ddr(void) |
||||
|
{ |
||||
|
int spd_addr[] = { NXP_SPD_EEPROM0 }; |
||||
|
struct ddr_info info; |
||||
|
struct sysinfo sys; |
||||
|
long long dram_size; |
||||
|
|
||||
|
zeromem(&sys, sizeof(sys)); |
||||
|
get_clocks(&sys); |
||||
|
debug("platform clock %lu\n", sys.freq_platform); |
||||
|
debug("DDR PLL %lu\n", sys.freq_ddr_pll0); |
||||
|
|
||||
|
zeromem(&info, sizeof(struct ddr_info)); |
||||
|
info.num_ctlrs = NUM_OF_DDRC; |
||||
|
info.dimm_on_ctlr = DDRC_NUM_DIMM; |
||||
|
info.clk = get_ddr_freq(&sys, 0); |
||||
|
info.spd_addr = spd_addr; |
||||
|
info.ddr[0] = (void *)NXP_DDR_ADDR; |
||||
|
|
||||
|
dram_size = dram_init(&info); |
||||
|
if (dram_size < 0) { |
||||
|
ERROR("DDR init failed.\n"); |
||||
|
} |
||||
|
|
||||
|
erratum_a008850_post(); |
||||
|
|
||||
|
return dram_size; |
||||
|
} |
||||
@ -0,0 +1,81 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#ifndef PLAT_DEF_H |
||||
|
#define PLAT_DEF_H |
||||
|
|
||||
|
#include <arch.h> |
||||
|
/*
|
||||
|
* Required without TBBR. |
||||
|
* To include the defines for DDR PHY |
||||
|
* Images. |
||||
|
*/ |
||||
|
#include <tbbr_img_def.h> |
||||
|
|
||||
|
#include <policy.h> |
||||
|
#include <soc.h> |
||||
|
|
||||
|
#define NXP_SPD_EEPROM0 0x51 |
||||
|
|
||||
|
#define NXP_SYSCLK_FREQ 100000000 |
||||
|
#define NXP_DDRCLK_FREQ 100000000 |
||||
|
|
||||
|
/* UART related definition */ |
||||
|
#define NXP_CONSOLE_ADDR NXP_UART_ADDR |
||||
|
#define NXP_CONSOLE_BAUDRATE 115200 |
||||
|
|
||||
|
/* Size of cacheable stacks */ |
||||
|
#if defined(IMAGE_BL2) |
||||
|
#if defined(TRUSTED_BOARD_BOOT) |
||||
|
#define PLATFORM_STACK_SIZE 0x2000 |
||||
|
#else |
||||
|
#define PLATFORM_STACK_SIZE 0x1000 |
||||
|
#endif |
||||
|
#elif defined(IMAGE_BL31) |
||||
|
#define PLATFORM_STACK_SIZE 0x1000 |
||||
|
#endif |
||||
|
|
||||
|
#define BL2_START NXP_OCRAM_ADDR |
||||
|
#define BL2_LIMIT (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE) |
||||
|
#define BL2_NOLOAD_START NXP_OCRAM_ADDR |
||||
|
#define BL2_NOLOAD_LIMIT BL2_BASE |
||||
|
|
||||
|
/* IO defines as needed by IO driver framework */ |
||||
|
#define MAX_IO_DEVICES 4 |
||||
|
#define MAX_IO_BLOCK_DEVICES 1 |
||||
|
#define MAX_IO_HANDLES 4 |
||||
|
|
||||
|
/*
|
||||
|
* FIP image defines - Offset at which FIP Image would be present |
||||
|
* Image would include Bl31 , Bl33 and Bl32 (optional) |
||||
|
*/ |
||||
|
#ifdef POLICY_FUSE_PROVISION |
||||
|
#define MAX_FIP_DEVICES 2 |
||||
|
#endif |
||||
|
|
||||
|
#ifndef MAX_FIP_DEVICES |
||||
|
#define MAX_FIP_DEVICES 1 |
||||
|
#endif |
||||
|
|
||||
|
#define BL32_IRQ_SEC_PHY_TIMER 29 |
||||
|
#define BL31_WDOG_SEC 89 |
||||
|
|
||||
|
/*
|
||||
|
* ID of the secure physical generic timer interrupt used by the BL32. |
||||
|
*/ |
||||
|
#define PLAT_LS_G1S_IRQ_PROPS(grp) \ |
||||
|
INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
||||
|
GIC_INTR_CFG_LEVEL) |
||||
|
|
||||
|
/* SGI 15 and Secure watchdog interrupts assigned to Group 0 */ |
||||
|
#define PLAT_LS_G0_IRQ_PROPS(grp) \ |
||||
|
INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
||||
|
GIC_INTR_CFG_EDGE), \ |
||||
|
INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
||||
|
GIC_INTR_CFG_LEVEL) |
||||
|
|
||||
|
|
||||
|
#endif /* PLAT_DEF_H */ |
||||
@ -0,0 +1,28 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#include <plat_common.h> |
||||
|
|
||||
|
#pragma weak board_enable_povdd |
||||
|
#pragma weak board_disable_povdd |
||||
|
|
||||
|
bool board_enable_povdd(void) |
||||
|
{ |
||||
|
#ifdef CONFIG_POVDD_ENABLE |
||||
|
return true; |
||||
|
#else |
||||
|
return false; |
||||
|
#endif |
||||
|
} |
||||
|
|
||||
|
bool board_disable_povdd(void) |
||||
|
{ |
||||
|
#ifdef CONFIG_POVDD_ENABLE |
||||
|
return true; |
||||
|
#else |
||||
|
return false; |
||||
|
#endif |
||||
|
} |
||||
@ -0,0 +1,31 @@ |
|||||
|
#
|
||||
|
# Copyright 2022 NXP
|
||||
|
#
|
||||
|
# SPDX-License-Identifier: BSD-3-Clause
|
||||
|
#
|
||||
|
|
||||
|
# board-specific build parameters
|
||||
|
BOOT_MODE ?= qspi |
||||
|
BOARD := ls1088aqds |
||||
|
|
||||
|
# DDR Compilation Configs
|
||||
|
NUM_OF_DDRC := 1 |
||||
|
DDRC_NUM_DIMM := 1 |
||||
|
DDR_ECC_EN := yes |
||||
|
|
||||
|
# On-Board Flash Details
|
||||
|
QSPI_FLASH_SZ := 0x4000000 |
||||
|
NOR_FLASH_SZ := 0x20000000 |
||||
|
|
||||
|
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c \
|
||||
|
${BOARD_PATH}/platform.c |
||||
|
|
||||
|
SUPPORTED_BOOT_MODE := qspi \
|
||||
|
sd \
|
||||
|
nor |
||||
|
|
||||
|
# Adding platform board build info
|
||||
|
include plat/nxp/common/plat_make_helper/plat_common_def.mk |
||||
|
|
||||
|
# Adding SoC build info
|
||||
|
include plat/nxp/soc-ls1088a/soc.mk |
||||
@ -0,0 +1,13 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#ifndef PLATFORM_DEF_H |
||||
|
#define PLATFORM_DEF_H |
||||
|
|
||||
|
#include <plat_def.h> |
||||
|
#include <plat_default_def.h> |
||||
|
|
||||
|
#endif /* PLATFORM_DEF_H */ |
||||
@ -0,0 +1,16 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#ifndef POLICY_H |
||||
|
#define POLICY_H |
||||
|
|
||||
|
/*
|
||||
|
* Set this to 0x0 to leave the default SMMU page size in sACR |
||||
|
* Set this to 0x1 to change the SMMU page size to 64K |
||||
|
*/ |
||||
|
#define POLICY_SMMU_PAGESZ_64K 0x1 |
||||
|
|
||||
|
#endif /* POLICY_H */ |
||||
@ -0,0 +1,86 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#include <errno.h> |
||||
|
|
||||
|
#include <common/debug.h> |
||||
|
#include <ddr.h> |
||||
|
#include <utils.h> |
||||
|
|
||||
|
#include <errata.h> |
||||
|
#include <platform_def.h> |
||||
|
|
||||
|
#ifdef CONFIG_STATIC_DDR |
||||
|
#error No static value defined |
||||
|
#endif |
||||
|
|
||||
|
static const struct rc_timing rce[] = { |
||||
|
{U(1600), U(8), U(8)}, |
||||
|
{U(1867), U(8), U(8)}, |
||||
|
{U(2134), U(8), U(9)}, |
||||
|
{} |
||||
|
}; |
||||
|
|
||||
|
static const struct board_timing udimm[] = { |
||||
|
{U(0x04), rce, U(0x01030508), U(0x090b0d06)}, |
||||
|
{U(0x1f), rce, U(0x01030508), U(0x090b0d06)}, |
||||
|
}; |
||||
|
|
||||
|
int ddr_board_options(struct ddr_info *priv) |
||||
|
{ |
||||
|
int ret; |
||||
|
struct memctl_opt *popts = &priv->opt; |
||||
|
|
||||
|
if (popts->rdimm != 0) { |
||||
|
debug("RDIMM parameters not set.\n"); |
||||
|
return -EINVAL; |
||||
|
} |
||||
|
|
||||
|
ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm)); |
||||
|
if (ret != 0) { |
||||
|
return ret; |
||||
|
} |
||||
|
|
||||
|
popts->addr_hash = 1; |
||||
|
popts->cpo_sample = U(0x7b); |
||||
|
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | |
||||
|
DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); |
||||
|
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | |
||||
|
DDR_CDR2_VREF_TRAIN_EN | |
||||
|
DDR_CDR2_VREF_RANGE_2; |
||||
|
|
||||
|
return 0; |
||||
|
} |
||||
|
|
||||
|
long long init_ddr(void) |
||||
|
{ |
||||
|
int spd_addr[] = { NXP_SPD_EEPROM0 }; |
||||
|
struct ddr_info info; |
||||
|
struct sysinfo sys; |
||||
|
long long dram_size; |
||||
|
|
||||
|
zeromem(&sys, sizeof(sys)); |
||||
|
get_clocks(&sys); |
||||
|
debug("platform clock %lu\n", sys.freq_platform); |
||||
|
debug("DDR PLL %lu\n", sys.freq_ddr_pll0); |
||||
|
|
||||
|
zeromem(&info, sizeof(struct ddr_info)); |
||||
|
info.num_ctlrs = NUM_OF_DDRC; |
||||
|
info.dimm_on_ctlr = DDRC_NUM_DIMM; |
||||
|
info.clk = get_ddr_freq(&sys, 0); |
||||
|
info.spd_addr = spd_addr; |
||||
|
info.ddr[0] = (void *)NXP_DDR_ADDR; |
||||
|
|
||||
|
dram_size = dram_init(&info); |
||||
|
|
||||
|
if (dram_size < 0) { |
||||
|
ERROR("DDR init failed.\n"); |
||||
|
} |
||||
|
|
||||
|
erratum_a008850_post(); |
||||
|
|
||||
|
return dram_size; |
||||
|
} |
||||
@ -0,0 +1,80 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#ifndef PLAT_DEF_H |
||||
|
#define PLAT_DEF_H |
||||
|
|
||||
|
#include <arch.h> |
||||
|
/*
|
||||
|
* Required without TBBR. |
||||
|
* To include the defines for DDR PHY |
||||
|
* Images. |
||||
|
*/ |
||||
|
#include <tbbr_img_def.h> |
||||
|
|
||||
|
#include <policy.h> |
||||
|
#include <soc.h> |
||||
|
|
||||
|
#define NXP_SPD_EEPROM0 0x51 |
||||
|
|
||||
|
#define NXP_SYSCLK_FREQ 100000000 |
||||
|
#define NXP_DDRCLK_FREQ 100000000 |
||||
|
|
||||
|
/* UART related definition */ |
||||
|
#define NXP_CONSOLE_ADDR NXP_UART_ADDR |
||||
|
#define NXP_CONSOLE_BAUDRATE 115200 |
||||
|
|
||||
|
/* Size of cacheable stacks */ |
||||
|
#if defined(IMAGE_BL2) |
||||
|
#if defined(TRUSTED_BOARD_BOOT) |
||||
|
#define PLATFORM_STACK_SIZE 0x2000 |
||||
|
#else |
||||
|
#define PLATFORM_STACK_SIZE 0x1000 |
||||
|
#endif |
||||
|
#elif defined(IMAGE_BL31) |
||||
|
#define PLATFORM_STACK_SIZE 0x1000 |
||||
|
#endif |
||||
|
|
||||
|
#define BL2_START NXP_OCRAM_ADDR |
||||
|
#define BL2_LIMIT (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE) |
||||
|
#define BL2_NOLOAD_START NXP_OCRAM_ADDR |
||||
|
#define BL2_NOLOAD_LIMIT BL2_BASE |
||||
|
|
||||
|
/* IO defines as needed by IO driver framework */ |
||||
|
#define MAX_IO_DEVICES 4 |
||||
|
#define MAX_IO_BLOCK_DEVICES 1 |
||||
|
#define MAX_IO_HANDLES 4 |
||||
|
|
||||
|
/*
|
||||
|
* FIP image defines - Offset at which FIP Image would be present |
||||
|
* Image would include Bl31 , Bl33 and Bl32 (optional) |
||||
|
*/ |
||||
|
#ifdef POLICY_FUSE_PROVISION |
||||
|
#define MAX_FIP_DEVICES 2 |
||||
|
#endif |
||||
|
|
||||
|
#ifndef MAX_FIP_DEVICES |
||||
|
#define MAX_FIP_DEVICES 1 |
||||
|
#endif |
||||
|
|
||||
|
#define BL32_IRQ_SEC_PHY_TIMER 29 |
||||
|
#define BL31_WDOG_SEC 89 |
||||
|
|
||||
|
/*
|
||||
|
* ID of the secure physical generic timer interrupt used by the BL32. |
||||
|
*/ |
||||
|
#define PLAT_LS_G1S_IRQ_PROPS(grp) \ |
||||
|
INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
||||
|
GIC_INTR_CFG_LEVEL) |
||||
|
|
||||
|
/* SGI 15 and Secure watchdog interrupts assigned to Group 0 */ |
||||
|
#define PLAT_LS_G0_IRQ_PROPS(grp) \ |
||||
|
INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
||||
|
GIC_INTR_CFG_EDGE), \ |
||||
|
INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
||||
|
GIC_INTR_CFG_LEVEL) |
||||
|
|
||||
|
#endif /* PLAT_DEF_H */ |
||||
@ -0,0 +1,28 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#include <plat_common.h> |
||||
|
|
||||
|
#pragma weak board_enable_povdd |
||||
|
#pragma weak board_disable_povdd |
||||
|
|
||||
|
bool board_enable_povdd(void) |
||||
|
{ |
||||
|
#ifdef CONFIG_POVDD_ENABLE |
||||
|
return true; |
||||
|
#else |
||||
|
return false; |
||||
|
#endif |
||||
|
} |
||||
|
|
||||
|
bool board_disable_povdd(void) |
||||
|
{ |
||||
|
#ifdef CONFIG_POVDD_ENABLE |
||||
|
return true; |
||||
|
#else |
||||
|
return false; |
||||
|
#endif |
||||
|
} |
||||
@ -0,0 +1,30 @@ |
|||||
|
#
|
||||
|
# Copyright 2022 NXP
|
||||
|
#
|
||||
|
# SPDX-License-Identifier: BSD-3-Clause
|
||||
|
#
|
||||
|
|
||||
|
# board-specific build parameters
|
||||
|
BOOT_MODE ?= qspi |
||||
|
BOARD := ls1088ardb |
||||
|
|
||||
|
# DDR Compilation Configs
|
||||
|
NUM_OF_DDRC := 1 |
||||
|
DDRC_NUM_DIMM := 1 |
||||
|
DDR_ECC_EN := yes |
||||
|
|
||||
|
# On-Board Flash Details
|
||||
|
QSPI_FLASH_SZ := 0x4000000 |
||||
|
|
||||
|
# Adding Platform files build files
|
||||
|
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c \
|
||||
|
${BOARD_PATH}/platform.c |
||||
|
|
||||
|
SUPPORTED_BOOT_MODE := qspi \
|
||||
|
sd |
||||
|
|
||||
|
# Adding platform board build info
|
||||
|
include plat/nxp/common/plat_make_helper/plat_common_def.mk |
||||
|
|
||||
|
# Adding SoC build info
|
||||
|
include plat/nxp/soc-ls1088a/soc.mk |
||||
@ -0,0 +1,13 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#ifndef PLATFORM_DEF_H |
||||
|
#define PLATFORM_DEF_H |
||||
|
|
||||
|
#include <plat_def.h> |
||||
|
#include <plat_default_def.h> |
||||
|
|
||||
|
#endif /* PLATFORM_DEF_H */ |
||||
@ -0,0 +1,15 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#ifndef POLICY_H |
||||
|
#define POLICY_H |
||||
|
|
||||
|
/* Set this to 0x0 to leave the default SMMU page size in sACR
|
||||
|
* Set this to 0x1 to change the SMMU page size to 64K |
||||
|
*/ |
||||
|
#define POLICY_SMMU_PAGESZ_64K 0x1 |
||||
|
|
||||
|
#endif /* POLICY_H */ |
||||
@ -0,0 +1,397 @@ |
|||||
|
/*
|
||||
|
* Copyright 2022 NXP |
||||
|
* |
||||
|
* SPDX-License-Identifier: BSD-3-Clause |
||||
|
*/ |
||||
|
|
||||
|
#include <assert.h> |
||||
|
|
||||
|
#include <arch.h> |
||||
|
#include <caam.h> |
||||
|
#include <cci.h> |
||||
|
#include <common/debug.h> |
||||
|
#include <dcfg.h> |
||||
|
#ifdef I2C_INIT |
||||
|
#include <i2c.h> |
||||
|
#endif |
||||
|
#include <lib/mmio.h> |
||||
|
#include <lib/xlat_tables/xlat_tables_v2.h> |
||||
|
#include <ls_interconnect.h> |
||||
|
#if TRUSTED_BOARD_BOOT |
||||
|
#include <nxp_smmu.h> |
||||
|
#endif |
||||
|
#include <nxp_timer.h> |
||||
|
#include <plat_console.h> |
||||
|
#include <plat_gic.h> |
||||
|
#include <plat_tzc400.h> |
||||
|
#include <pmu.h> |
||||
|
#if defined(NXP_SFP_ENABLED) |
||||
|
#include <sfp.h> |
||||
|
#endif |
||||
|
|
||||
|
#include <errata.h> |
||||
|
#ifdef CONFIG_OCRAM_ECC_EN |
||||
|
#include <ocram.h> |
||||
|
#endif |
||||
|
#include <plat_common.h> |
||||
|
#include <platform_def.h> |
||||
|
#include <soc.h> |
||||
|
|
||||
|
static unsigned char _power_domain_tree_desc[NUMBER_OF_CLUSTERS + 2]; |
||||
|
static struct soc_type soc_list[] = { |
||||
|
SOC_ENTRY(LS1044A, LS1044A, 1, 4), |
||||
|
SOC_ENTRY(LS1044AE, LS1044AE, 1, 4), |
||||
|
SOC_ENTRY(LS1048A, LS1048A, 1, 4), |
||||
|
SOC_ENTRY(LS1048AE, LS1048AE, 1, 4), |
||||
|
SOC_ENTRY(LS1084A, LS1084A, 2, 4), |
||||
|
SOC_ENTRY(LS1084AE, LS1084AE, 2, 4), |
||||
|
SOC_ENTRY(LS1088A, LS1088A, 2, 4), |
||||
|
SOC_ENTRY(LS1088AE, LS1088AE, 2, 4), |
||||
|
}; |
||||
|
|
||||
|
static dcfg_init_info_t dcfg_init_data = { |
||||
|
.g_nxp_dcfg_addr = NXP_DCFG_ADDR, |
||||
|
.nxp_sysclk_freq = NXP_SYSCLK_FREQ, |
||||
|
.nxp_ddrclk_freq = NXP_DDRCLK_FREQ, |
||||
|
.nxp_plat_clk_divider = NXP_PLATFORM_CLK_DIVIDER, |
||||
|
}; |
||||
|
|
||||
|
/*
|
||||
|
* This function dynamically constructs the topology according to |
||||
|
* SoC Flavor and returns it. |
||||
|
*/ |
||||
|
const unsigned char *plat_get_power_domain_tree_desc(void) |
||||
|
{ |
||||
|
unsigned int i; |
||||
|
uint8_t num_clusters, cores_per_cluster; |
||||
|
|
||||
|
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
||||
|
|
||||
|
/*
|
||||
|
* The highest level is the system level. The next level is constituted |
||||
|
* by clusters and then cores in clusters. |
||||
|
*/ |
||||
|
_power_domain_tree_desc[0] = 1; |
||||
|
_power_domain_tree_desc[1] = num_clusters; |
||||
|
|
||||
|
for (i = 0; i < _power_domain_tree_desc[1]; i++) { |
||||
|
_power_domain_tree_desc[i + 2] = cores_per_cluster; |
||||
|
} |
||||
|
|
||||
|
|
||||
|
return _power_domain_tree_desc; |
||||
|
} |
||||
|
|
||||
|
CASSERT(NUMBER_OF_CLUSTERS && NUMBER_OF_CLUSTERS <= 256, |
||||
|
assert_invalid_ls1088a_cluster_count); |
||||
|
|
||||
|
/*
|
||||
|
* This function returns the core count within the cluster corresponding to |
||||
|
* `mpidr`. |
||||
|
*/ |
||||
|
unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr) |
||||
|
{ |
||||
|
return CORES_PER_CLUSTER; |
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* This function returns the total number of cores in the SoC |
||||
|
*/ |
||||
|
unsigned int get_tot_num_cores(void) |
||||
|
{ |
||||
|
uint8_t num_clusters, cores_per_cluster; |
||||
|
|
||||
|
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
||||
|
|
||||
|
return (num_clusters * cores_per_cluster); |
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* This function returns the PMU IDLE Cluster mask. |
||||
|
*/ |
||||
|
unsigned int get_pmu_idle_cluster_mask(void) |
||||
|
{ |
||||
|
uint8_t num_clusters, cores_per_cluster; |
||||
|
|
||||
|
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
||||
|
|
||||
|
return ((1 << num_clusters) - 2); |
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* This function returns the PMU Flush Cluster mask. |
||||
|
*/ |
||||
|
unsigned int get_pmu_flush_cluster_mask(void) |
||||
|
{ |
||||
|
uint8_t num_clusters, cores_per_cluster; |
||||
|
|
||||
|
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
||||
|
|
||||
|
return ((1 << num_clusters) - 2); |
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* This function returns the PMU IDLE Core mask. |
||||
|
*/ |
||||
|
unsigned int get_pmu_idle_core_mask(void) |
||||
|
{ |
||||
|
return ((1 << get_tot_num_cores()) - 2); |
||||
|
} |
||||
|
|
||||
|
#ifdef IMAGE_BL2 |
||||
|
|
||||
|
void soc_bl2_prepare_exit(void) |
||||
|
{ |
||||
|
#if defined(NXP_SFP_ENABLED) && defined(DISABLE_FUSE_WRITE) |
||||
|
set_sfp_wr_disable(); |
||||
|
#endif |
||||
|
} |
||||
|
|
||||
|
void soc_preload_setup(void) |
||||
|
{ |
||||
|
|
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* This function returns the boot device based on RCW_SRC |
||||
|
*/ |
||||
|
enum boot_device get_boot_dev(void) |
||||
|
{ |
||||
|
enum boot_device src = BOOT_DEVICE_NONE; |
||||
|
uint32_t porsr1; |
||||
|
uint32_t rcw_src, val; |
||||
|
|
||||
|
porsr1 = read_reg_porsr1(); |
||||
|
|
||||
|
rcw_src = (porsr1 & PORSR1_RCW_MASK) >> PORSR1_RCW_SHIFT; |
||||
|
|
||||
|
/* RCW SRC NOR */ |
||||
|
val = rcw_src & RCW_SRC_TYPE_MASK; |
||||
|
if (val == NOR_16B_VAL) { |
||||
|
src = BOOT_DEVICE_IFC_NOR; |
||||
|
INFO("RCW BOOT SRC is IFC NOR\n"); |
||||
|
} else { |
||||
|
val = rcw_src & RCW_SRC_SERIAL_MASK; |
||||
|
switch (val) { |
||||
|
case QSPI_VAL: |
||||
|
src = BOOT_DEVICE_QSPI; |
||||
|
INFO("RCW BOOT SRC is QSPI\n"); |
||||
|
break; |
||||
|
case SDHC_VAL: |
||||
|
src = BOOT_DEVICE_EMMC; |
||||
|
INFO("RCW BOOT SRC is SD/EMMC\n"); |
||||
|
break; |
||||
|
case EMMC_VAL: |
||||
|
src = BOOT_DEVICE_EMMC; |
||||
|
INFO("RCW BOOT SRC is SD/EMMC\n"); |
||||
|
break; |
||||
|
default: |
||||
|
src = BOOT_DEVICE_NONE; |
||||
|
} |
||||
|
} |
||||
|
|
||||
|
return src; |
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* This function sets up access permissions on memory regions |
||||
|
*/ |
||||
|
void soc_mem_access(void) |
||||
|
{ |
||||
|
dram_regions_info_t *info_dram_regions = get_dram_regions_info(); |
||||
|
int i = 0; |
||||
|
struct tzc400_reg tzc400_reg_list[MAX_NUM_TZC_REGION]; |
||||
|
int dram_idx, index = 1; |
||||
|
|
||||
|
for (dram_idx = 0; dram_idx < info_dram_regions->num_dram_regions; |
||||
|
dram_idx++) { |
||||
|
if (info_dram_regions->region[i].size == 0) { |
||||
|
ERROR("DDR init failure, or"); |
||||
|
ERROR("DRAM regions not populated correctly.\n"); |
||||
|
break; |
||||
|
} |
||||
|
|
||||
|
index = populate_tzc400_reg_list(tzc400_reg_list, |
||||
|
dram_idx, index, |
||||
|
info_dram_regions->region[dram_idx].addr, |
||||
|
info_dram_regions->region[dram_idx].size, |
||||
|
NXP_SECURE_DRAM_SIZE, NXP_SP_SHRD_DRAM_SIZE); |
||||
|
} |
||||
|
|
||||
|
mem_access_setup(NXP_TZC_ADDR, index, |
||||
|
tzc400_reg_list); |
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* This function implements soc specific erratum |
||||
|
* This is called before DDR is initialized or MMU is enabled |
||||
|
*/ |
||||
|
void soc_early_init(void) |
||||
|
{ |
||||
|
enum boot_device dev; |
||||
|
dram_regions_info_t *dram_regions_info = get_dram_regions_info(); |
||||
|
|
||||
|
#ifdef CONFIG_OCRAM_ECC_EN |
||||
|
ocram_init(NXP_OCRAM_ADDR, NXP_OCRAM_SIZE); |
||||
|
#endif |
||||
|
dcfg_init(&dcfg_init_data); |
||||
|
#if LOG_LEVEL > 0 |
||||
|
/* Initialize the console to provide early debug support */ |
||||
|
plat_console_init(NXP_CONSOLE_ADDR, |
||||
|
NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE); |
||||
|
#endif |
||||
|
enable_timer_base_to_cluster(NXP_PMU_ADDR); |
||||
|
enable_core_tb(NXP_PMU_ADDR); |
||||
|
|
||||
|
/*
|
||||
|
* Use the region(NXP_SD_BLOCK_BUF_ADDR + NXP_SD_BLOCK_BUF_SIZE) |
||||
|
* as dma of sd |
||||
|
*/ |
||||
|
dev = get_boot_dev(); |
||||
|
if (dev == BOOT_DEVICE_EMMC) { |
||||
|
mmap_add_region(NXP_SD_BLOCK_BUF_ADDR, NXP_SD_BLOCK_BUF_ADDR, |
||||
|
NXP_SD_BLOCK_BUF_SIZE, |
||||
|
MT_DEVICE | MT_RW | MT_NS); |
||||
|
} |
||||
|
|
||||
|
#if TRUSTED_BOARD_BOOT |
||||
|
uint32_t mode; |
||||
|
|
||||
|
sfp_init(NXP_SFP_ADDR); |
||||
|
/*
|
||||
|
* For secure boot disable SMMU. |
||||
|
* Later when platform security policy comes in picture, |
||||
|
* this might get modified based on the policy |
||||
|
*/ |
||||
|
if (check_boot_mode_secure(&mode) == true) { |
||||
|
bypass_smmu(NXP_SMMU_ADDR); |
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* For Mbedtls currently crypto is not supported via CAAM |
||||
|
* enable it when that support is there. In tbbr.mk |
||||
|
* the CAAM_INTEG is set as 0. |
||||
|
*/ |
||||
|
#ifndef MBEDTLS_X509 |
||||
|
/* Initialize the crypto accelerator if enabled */ |
||||
|
if (is_sec_enabled() == false) { |
||||
|
INFO("SEC is disabled.\n"); |
||||
|
} else { |
||||
|
sec_init(NXP_CAAM_ADDR); |
||||
|
} |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
soc_errata(); |
||||
|
|
||||
|
delay_timer_init(NXP_TIMER_ADDR); |
||||
|
i2c_init(NXP_I2C_ADDR); |
||||
|
dram_regions_info->total_dram_size = init_ddr(); |
||||
|
} |
||||
|
#else /* !IMAGE_BL2 */ |
||||
|
|
||||
|
void soc_early_platform_setup2(void) |
||||
|
{ |
||||
|
dcfg_init(&dcfg_init_data); |
||||
|
/*
|
||||
|
* Initialize system level generic timer for Socs |
||||
|
*/ |
||||
|
delay_timer_init(NXP_TIMER_ADDR); |
||||
|
|
||||
|
#if LOG_LEVEL > 0 |
||||
|
/* Initialize the console to provide early debug support */ |
||||
|
plat_console_init(NXP_CONSOLE_ADDR, |
||||
|
NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE); |
||||
|
#endif |
||||
|
} |
||||
|
|
||||
|
void soc_platform_setup(void) |
||||
|
{ |
||||
|
/* Initialize the GIC driver, cpu and distributor interfaces */ |
||||
|
static uintptr_t target_mask_array[PLATFORM_CORE_COUNT]; |
||||
|
static interrupt_prop_t ls_interrupt_props[] = { |
||||
|
PLAT_LS_G1S_IRQ_PROPS(INTR_GROUP1S), |
||||
|
PLAT_LS_G0_IRQ_PROPS(INTR_GROUP0) |
||||
|
}; |
||||
|
|
||||
|
plat_ls_gic_driver_init(NXP_GICD_ADDR, NXP_GICR_ADDR, |
||||
|
PLATFORM_CORE_COUNT, |
||||
|
ls_interrupt_props, |
||||
|
ARRAY_SIZE(ls_interrupt_props), |
||||
|
target_mask_array, |
||||
|
plat_core_pos); |
||||
|
|
||||
|
plat_ls_gic_init(); |
||||
|
enable_init_timer(); |
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* This function initializes the soc from the BL31 module |
||||
|
*/ |
||||
|
void soc_init(void) |
||||
|
{ |
||||
|
uint8_t num_clusters, cores_per_cluster; |
||||
|
|
||||
|
/* low-level init of the soc */ |
||||
|
soc_init_lowlevel(); |
||||
|
_init_global_data(); |
||||
|
soc_init_percpu(); |
||||
|
_initialize_psci(); |
||||
|
|
||||
|
/*
|
||||
|
* Initialize Interconnect for this cluster during cold boot. |
||||
|
* No need for locks as no other CPU is active. |
||||
|
*/ |
||||
|
cci_init(NXP_CCI_ADDR, cci_map, ARRAY_SIZE(cci_map)); |
||||
|
|
||||
|
/*
|
||||
|
* Enable Interconnect coherency for the primary CPU's cluster. |
||||
|
*/ |
||||
|
get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster); |
||||
|
plat_ls_interconnect_enter_coherency(num_clusters); |
||||
|
|
||||
|
/* set platform security policies */ |
||||
|
_set_platform_security(); |
||||
|
|
||||
|
/* Initialize the crypto accelerator if enabled */ |
||||
|
if (is_sec_enabled() == false) { |
||||
|
INFO("SEC is disabled.\n"); |
||||
|
} else { |
||||
|
sec_init(NXP_CAAM_ADDR); |
||||
|
} |
||||
|
} |
||||
|
|
||||
|
void soc_runtime_setup(void) |
||||
|
{ |
||||
|
|
||||
|
} |
||||
|
#endif /* IMAGE_BL2 */ |
||||
|
|
||||
|
/*
|
||||
|
* Function to return the SoC SYS CLK |
||||
|
*/ |
||||
|
unsigned int get_sys_clk(void) |
||||
|
{ |
||||
|
return NXP_SYSCLK_FREQ; |
||||
|
} |
||||
|
|
||||
|
/*
|
||||
|
* Function returns the base counter frequency |
||||
|
* after reading the first entry at CNTFID0 (0x20 offset). |
||||
|
* |
||||
|
* Function is used by: |
||||
|
* 1. ARM common code for PSCI management. |
||||
|
* 2. ARM Generic Timer init. |
||||
|
*/ |
||||
|
unsigned int plat_get_syscnt_freq2(void) |
||||
|
{ |
||||
|
unsigned int counter_base_frequency; |
||||
|
/*
|
||||
|
* Below register specifies the base frequency of the system counter. |
||||
|
* As per NXP Board Manuals: |
||||
|
* The system counter always works with SYS_REF_CLK/4 frequency clock. |
||||
|
*/ |
||||
|
counter_base_frequency = mmio_read_32(NXP_TIMER_ADDR + CNTFID_OFF); |
||||
|
|
||||
|
return counter_base_frequency; |
||||
|
} |
||||
@ -0,0 +1,87 @@ |
|||||
|
# |
||||
|
# Copyright 2022 NXP |
||||
|
# |
||||
|
# SPDX-License-Identifier: BSD-3-Clause |
||||
|
# |
||||
|
# |
||||
|
#------------------------------------------------------------------------------ |
||||
|
# |
||||
|
# This file contains the basic architecture definitions that drive the build |
||||
|
# |
||||
|
# ----------------------------------------------------------------------------- |
||||
|
|
||||
|
CORE_TYPE := a53 |
||||
|
|
||||
|
CACHE_LINE := 6 |
||||
|
|
||||
|
# Set to GIC400 or GIC500 |
||||
|
GIC := GIC500 |
||||
|
|
||||
|
# Set to CCI400 or CCN504 or CCN508 |
||||
|
INTERCONNECT := CCI400 |
||||
|
|
||||
|
# Select the DDR PHY generation to be used |
||||
|
PLAT_DDR_PHY := PHY_GEN1 |
||||
|
|
||||
|
PHYS_SYS := 64 |
||||
|
|
||||
|
# Indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2 |
||||
|
CHASSIS := 3 |
||||
|
|
||||
|
# TZC IP Details TZC used is TZC380 or TZC400 |
||||
|
TZC_ID := TZC400 |
||||
|
|
||||
|
# CONSOLE Details available is NS16550 or PL011 |
||||
|
CONSOLE := NS16550 |
||||
|
|
||||
|
NXP_SFP_VER := 3_4 |
||||
|
|
||||
|
# In IMAGE_BL2, compile time flag for handling Cache coherency |
||||
|
# with CAAM for BL2 running from OCRAM |
||||
|
SEC_MEM_NON_COHERENT := yes |
||||
|
|
||||
|
|
||||
|
# OCRAM MAP for BL2 |
||||
|
# Before BL2 |
||||
|
# 0x18000000 - 0x18009fff -> Used by ROM code, (TBD - can it be used for xlat tables) |
||||
|
# 0x1800a000 - 0x1801Cfff -> Reserved for BL2 binary (76 KB) |
||||
|
# 0x1801D000 - 0x1801ffff -> CSF header for BL2 (12 KB) |
||||
|
OCRAM_START_ADDR := 0x18000000 |
||||
|
OCRAM_SIZE := 0x20000 |
||||
|
|
||||
|
CSF_HDR_SZ := 0x3000 |
||||
|
|
||||
|
# Area of OCRAM reserved by ROM code |
||||
|
NXP_ROM_RSVD := 0xa000 |
||||
|
|
||||
|
# Input to CST create_hdr_isbc tool |
||||
|
BL2_HDR_LOC := 0x1801D000 |
||||
|
|
||||
|
# Location of BL2 on OCRAM |
||||
|
# BL2_BASE=OCRAM_START_ADDR+NXP_ROM_RSVD |
||||
|
BL2_BASE := 0x1800a000 |
||||
|
|
||||
|
# SoC ERRATUM to be enabled |
||||
|
ERRATA_SOC_A008850 := 1 |
||||
|
|
||||
|
# ARM Erratum |
||||
|
ERRATA_A53_855873 := 1 |
||||
|
|
||||
|
# DDR Erratum |
||||
|
ERRATA_DDR_A008511 := 1 |
||||
|
ERRATA_DDR_A009803 := 1 |
||||
|
ERRATA_DDR_A009942 := 1 |
||||
|
ERRATA_DDR_A010165 := 1 |
||||
|
|
||||
|
# Define Endianness of each module |
||||
|
NXP_ESDHC_ENDIANNESS := LE |
||||
|
NXP_SFP_ENDIANNESS := LE |
||||
|
NXP_GPIO_ENDIANNESS := LE |
||||
|
NXP_SNVS_ENDIANNESS := LE |
||||
|
NXP_GUR_ENDIANNESS := LE |
||||
|
NXP_SEC_ENDIANNESS := LE |
||||
|
NXP_DDR_ENDIANNESS := LE |
||||
|
NXP_QSPI_ENDIANNESS := LE |
||||
|
|
||||
|
# OCRAM ECC Enabled |
||||
|
OCRAM_ECC_EN := yes |
||||
@ -0,0 +1,110 @@ |
|||||
|
#
|
||||
|
# Copyright 2022 NXP
|
||||
|
#
|
||||
|
# SPDX-License-Identifier: BSD-3-Clause
|
||||
|
#
|
||||
|
|
||||
|
# SoC-specific build parameters
|
||||
|
SOC := ls1088a |
||||
|
PLAT_PATH := plat/nxp |
||||
|
PLAT_COMMON_PATH:= plat/nxp/common |
||||
|
PLAT_DRIVERS_PATH:= drivers/nxp |
||||
|
PLAT_SOC_PATH := ${PLAT_PATH}/soc-${SOC} |
||||
|
BOARD_PATH := ${PLAT_SOC_PATH}/${BOARD} |
||||
|
|
||||
|
# Separate BL2 NOLOAD region (.bss, stack, page tables). need to
|
||||
|
# define BL2_NOLOAD_START and BL2_NOLOAD_LIMIT
|
||||
|
SEPARATE_BL2_NOLOAD_REGION := 1 |
||||
|
|
||||
|
# get SoC-specific defnitions
|
||||
|
include ${PLAT_SOC_PATH}/soc.def |
||||
|
include ${PLAT_COMMON_PATH}/plat_make_helper/soc_common_def.mk |
||||
|
include ${PLAT_COMMON_PATH}/plat_make_helper/plat_build_macros.mk |
||||
|
|
||||
|
# For Security Features
|
||||
|
DISABLE_FUSE_WRITE := 1 |
||||
|
ifeq (${TRUSTED_BOARD_BOOT}, 1) |
||||
|
ifeq (${GENERATE_COT},1) |
||||
|
# Save Keys to be used by DDR FIP image
|
||||
|
SAVE_KEYS=1 |
||||
|
endif |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,SMMU_NEEDED,BL2)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,SFP_NEEDED,BL2)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,SNVS_NEEDED,BL2)) |
||||
|
# Used by create_pbl tool to
|
||||
|
# create bl2_<boot_mode>_sec.pbl image
|
||||
|
SECURE_BOOT := yes |
||||
|
endif |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,CRYPTO_NEEDED,BL_COMM)) |
||||
|
|
||||
|
# Selecting Drivers for SoC
|
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,DCFG_NEEDED,BL_COMM)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,TIMER_NEEDED,BL_COMM)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,INTERCONNECT_NEEDED,BL_COMM)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,GIC_NEEDED,BL31)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,CONSOLE_NEEDED,BL_COMM)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,PMU_NEEDED,BL_COMM)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,DDR_DRIVER_NEEDED,BL2)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,TZASC_NEEDED,BL2)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,I2C_NEEDED,BL2)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,IMG_LOADR_NEEDED,BL2)) |
||||
|
|
||||
|
# Selecting PSCI & SIP_SVC support
|
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,PSCI_NEEDED,BL31)) |
||||
|
$(eval $(call SET_NXP_MAKE_FLAG,SIPSVC_NEEDED,BL31)) |
||||
|
|
||||
|
|
||||
|
# Adding SoC specific files
|
||||
|
include ${PLAT_COMMON_PATH}/soc_errata/errata.mk |
||||
|
|
||||
|
PLAT_INCLUDES += -I${PLAT_COMMON_PATH}/include/default\
|
||||
|
-I${BOARD_PATH}\
|
||||
|
-I${PLAT_COMMON_PATH}/include/default/ch_${CHASSIS}\
|
||||
|
-I${PLAT_COMMON_PATH}/soc_errata\
|
||||
|
-I${PLAT_COMMON_PATH}/include\
|
||||
|
-I${PLAT_SOC_PATH}/include |
||||
|
|
||||
|
ifeq (${SECURE_BOOT},yes) |
||||
|
include ${PLAT_COMMON_PATH}/tbbr/tbbr.mk |
||||
|
endif |
||||
|
|
||||
|
ifeq (${PSCI_NEEDED}, yes) |
||||
|
include ${PLAT_COMMON_PATH}/psci/psci.mk |
||||
|
endif |
||||
|
|
||||
|
ifeq (${SIPSVC_NEEDED}, yes) |
||||
|
include ${PLAT_COMMON_PATH}/sip_svc/sipsvc.mk |
||||
|
endif |
||||
|
|
||||
|
# for fuse-fip & fuse-programming
|
||||
|
ifeq (${FUSE_PROG}, 1) |
||||
|
include ${PLAT_COMMON_PATH}/fip_handler/fuse_fip/fuse.mk |
||||
|
endif |
||||
|
|
||||
|
ifeq (${IMG_LOADR_NEEDED},yes) |
||||
|
include $(PLAT_COMMON_PATH)/img_loadr/img_loadr.mk |
||||
|
endif |
||||
|
|
||||
|
# Adding source files for the above selected drivers.
|
||||
|
include ${PLAT_DRIVERS_PATH}/drivers.mk |
||||
|
|
||||
|
PLAT_BL_COMMON_SOURCES += ${PLAT_COMMON_PATH}/$(ARCH)/ls_helpers.S\
|
||||
|
${PLAT_SOC_PATH}/${ARCH}/${SOC}_helpers.S\
|
||||
|
${PLAT_SOC_PATH}/soc.c |
||||
|
|
||||
|
BL31_SOURCES += ${PLAT_SOC_PATH}/$(ARCH)/${SOC}.S\
|
||||
|
${PSCI_SOURCES}\
|
||||
|
${SIPSVC_SOURCES}\
|
||||
|
${PLAT_COMMON_PATH}/$(ARCH)/bl31_data.S |
||||
|
|
||||
|
ifeq (${TEST_BL31}, 1) |
||||
|
BL31_SOURCES += ${PLAT_SOC_PATH}/$(ARCH)/bootmain64.S \
|
||||
|
${PLAT_SOC_PATH}/$(ARCH)/nonboot64.S |
||||
|
endif |
||||
|
|
||||
|
BL2_SOURCES += ${DDR_CNTLR_SOURCES}\
|
||||
|
${TBBR_SOURCES}\
|
||||
|
${FUSE_SOURCES} |
||||
|
|
||||
|
# Adding TFA setup files
|
||||
|
include ${PLAT_PATH}/common/setup/common.mk |
||||
Loading…
Reference in new issue