feat(stm32mp2-fdts): add sdmmc nodes in SoC DT file

Add the sdmmc1 & sdmmc2 nodes in stm32mp251.dtsi file, to support
eMMC or SD-cards.
To avoid increasing DT size if SD-card or eMMC boot is not selected,
the nodes are removed from DT thanks to stm32mp25-bl2.dtsi overlay.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2ed841442b7dddf0c441ae3b3d2462ef535f9951

fdts/stm32mp25-bl2.dtsi

@@ -4,6 +4,15 @@
  */
 
 / {
+	soc@0 {
+#if !STM32MP_EMMC && !STM32MP_SDMMC
+		rifsc@42080000 {
+			/delete-node/ mmc@48220000;
+			/delete-node/ mmc@48230000;
+		};
+#endif
+	};
+
 	/*
 	 * UUID's here are UUID RFC 4122 compliant meaning fieds are stored in
 	 * network order (big endian)

fdts/stm32mp251.dtsi

@@ -97,6 +97,32 @@
 				resets = <&rcc USART2_R>;
 				status = "disabled";
 			};
+
+			sdmmc1: mmc@48220000 {
+				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00353180>;
+				reg = <0x48220000 0x400>, <0x44230400 0x8>;
+				clocks = <&rcc CK_KER_SDMMC1>;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC1_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <120000000>;
+				status = "disabled";
+			};
+
+			sdmmc2: mmc@48230000 {
+				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00353180>;
+				reg = <0x48230000 0x400>, <0x44230800 0x8>;
+				clocks = <&rcc CK_KER_SDMMC2>;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC2_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <120000000>;
+				status = "disabled";
+			};
 		};
 
 		bsec: efuse@44000000 {