diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 77d683c45..db6f3f9e4 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -29,6 +29,7 @@ static unsigned char mmc_ext_csd[512] __aligned(16);
 static unsigned int mmc_flags;
 static struct mmc_device_info *mmc_dev_info;
 static unsigned int rca;
+static unsigned int scr[2]__aligned(16) = { 0 };
 
 static const unsigned char tran_speed_base[16] = {
 	0, 10, 12, 13, 15, 20, 26, 30, 35, 40, 45, 52, 55, 60, 70, 80
@@ -90,7 +91,8 @@ static int mmc_device_state(void)
 		ret = mmc_send_cmd(MMC_CMD(13), rca << RCA_SHIFT_OFFSET,
 				   MMC_RESPONSE_R1, &resp_data[0]);
 		if (ret != 0) {
-			return ret;
+			retries--;
+			continue;
 		}
 
 		if ((resp_data[0] & STATUS_SWITCH_ERROR) != 0U) {
@@ -129,7 +131,6 @@ static int mmc_sd_switch(unsigned int bus_width)
 {
 	int ret;
 	int retries = MMC_DEFAULT_MAX_RETRIES;
-	unsigned int scr[2] = { 0 };
 	unsigned int bus_width_arg = 0;
 
 	ret = ops->prepare(0, (uintptr_t)&scr, sizeof(scr));
@@ -341,8 +342,9 @@ static int sd_send_op_cond(void)
 		}
 
 		/* ACMD41: SD_SEND_OP_COND */
-		ret = mmc_send_cmd(MMC_ACMD(41), OCR_HCS, MMC_RESPONSE_R3,
-				   &resp_data[0]);
+		ret = mmc_send_cmd(MMC_ACMD(41), OCR_HCS |
+			mmc_dev_info->ocr_voltage, MMC_RESPONSE_R3,
+			&resp_data[0]);
 		if (ret != 0) {
 			return ret;
 		}
diff --git a/include/drivers/mmc.h b/include/drivers/mmc.h
index 2aaa28d68..7611f019a 100644
--- a/include/drivers/mmc.h
+++ b/include/drivers/mmc.h
@@ -220,6 +220,7 @@ struct mmc_device_info {
 	unsigned long long	device_size;	/* Size of device in bytes */
 	unsigned int		block_size;	/* Block size in bytes */
 	unsigned int		max_bus_freq;	/* Max bus freq in Hz */
+	unsigned int		ocr_voltage;	/* OCR voltage */
 	enum mmc_device_type	mmc_dev_type;	/* Type of MMC */
 };
 
diff --git a/plat/intel/soc/stratix10/bl2_plat_setup.c b/plat/intel/soc/stratix10/bl2_plat_setup.c
index 83aaa8595..71e862fa5 100644
--- a/plat/intel/soc/stratix10/bl2_plat_setup.c
+++ b/plat/intel/soc/stratix10/bl2_plat_setup.c
@@ -104,6 +104,7 @@ void bl2_el3_plat_arch_setup(void)
 	dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000);
 
 	info.mmc_dev_type = MMC_IS_SD;
+	info.ocr_voltage = OCR_3_3_3_4 | OCR_3_2_3_3;
 
 	switch (boot_source) {
 	case BOOT_SOURCE_SDMMC: