drivers: introduce ST ETZPC driver

ETZPC stands for Extended TrustZone Protection Controller. It is a
resource conditional access device. It is mainly based on Arm TZPC.

ST ETZPC exposes memory mapped DECPROT cells to set access permissions
to SoC peripheral interfaces as I2C, SPI, DDR controllers, and some
of the SoC internal memories.

ST ETZPC exposes memory mapped TZMA cells to set access permissions
to some SoC internal memories.

Change-Id: I47ce20ffcfb55306dab923153b71e1bcbe2a5570
Co-developed-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

drivers/st/etzpc/etzpc.c

@@ -0,0 +1,258 @@
+/*
+ * Copyright (c) 2017-2020, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdint.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/st/etzpc.h>
+#include <dt-bindings/soc/st,stm32-etzpc.h>
+#include <lib/mmio.h>
+#include <lib/utils_def.h>
+#include <libfdt.h>
+
+#include <platform_def.h>
+
+/* Device Tree related definitions */
+#define ETZPC_COMPAT			"st,stm32-etzpc"
+#define ETZPC_LOCK_MASK			0x1U
+#define ETZPC_MODE_SHIFT		8
+#define ETZPC_MODE_MASK			GENMASK(1, 0)
+#define ETZPC_ID_SHIFT			16
+#define ETZPC_ID_MASK			GENMASK(7, 0)
+
+/* ID Registers */
+#define ETZPC_TZMA0_SIZE		0x000U
+#define ETZPC_DECPROT0			0x010U
+#define ETZPC_DECPROT_LOCK0		0x030U
+#define ETZPC_HWCFGR			0x3F0U
+#define ETZPC_VERR			0x3F4U
+
+/* ID Registers fields */
+#define ETZPC_TZMA0_SIZE_LOCK		BIT(31)
+#define ETZPC_DECPROT0_MASK		GENMASK(1, 0)
+#define ETZPC_HWCFGR_NUM_TZMA_SHIFT	0
+#define ETZPC_HWCFGR_NUM_PER_SEC_SHIFT	8
+#define ETZPC_HWCFGR_NUM_AHB_SEC_SHIFT	16
+#define ETZPC_HWCFGR_CHUNCKS1N4_SHIFT	24
+
+#define DECPROT_SHIFT			1
+#define IDS_PER_DECPROT_REGS		16U
+#define IDS_PER_DECPROT_LOCK_REGS	32U
+
+/*
+ * etzpc_instance.
+ * base : register base address set during init given by user
+ * chunk_size : supported TZMA size steps
+ * num_tzma: number of TZMA zone read from register at init
+ * num_ahb_sec : number of securable AHB master zone read from register
+ * num_per_sec : number of securable AHB & APB Peripherals read from register
+ * revision : IP revision read from register at init
+ */
+struct etzpc_instance {
+	uintptr_t base;
+	uint8_t chunck_size;
+	uint8_t num_tzma;
+	uint8_t num_per_sec;
+	uint8_t num_ahb_sec;
+	uint8_t revision;
+};
+
+/* Only 1 instance of the ETZPC is expected per platform */
+static struct etzpc_instance etzpc_dev;
+
+/*
+ * Implementation uses uint8_t to store each securable DECPROT configuration.
+ * When resuming from deep suspend, the DECPROT configurations are restored.
+ */
+#define PERIPH_LOCK_BIT		BIT(7)
+#define PERIPH_ATTR_MASK	GENMASK(2, 0)
+
+#if ENABLE_ASSERTIONS
+static bool valid_decprot_id(unsigned int id)
+{
+	return id < (unsigned int)etzpc_dev.num_per_sec;
+}
+
+static bool valid_tzma_id(unsigned int id)
+{
+	return id < (unsigned int)etzpc_dev.num_tzma;
+}
+#endif
+
+/*
+ * etzpc_configure_decprot : Load a DECPROT configuration
+ * decprot_id : ID of the IP
+ * decprot_attr : Restriction access attribute
+ */
+void etzpc_configure_decprot(uint32_t decprot_id,
+			     enum etzpc_decprot_attributes decprot_attr)
+{
+	uintptr_t offset = 4U * (decprot_id / IDS_PER_DECPROT_REGS);
+	uint32_t shift = (decprot_id % IDS_PER_DECPROT_REGS) << DECPROT_SHIFT;
+	uint32_t masked_decprot = (uint32_t)decprot_attr & ETZPC_DECPROT0_MASK;
+
+	assert(valid_decprot_id(decprot_id));
+
+	mmio_clrsetbits_32(etzpc_dev.base + ETZPC_DECPROT0 + offset,
+			   (uint32_t)ETZPC_DECPROT0_MASK << shift,
+			   masked_decprot << shift);
+}
+
+/*
+ * etzpc_get_decprot : Get the DECPROT attribute
+ * decprot_id : ID of the IP
+ * return : Attribute of this DECPROT
+ */
+enum etzpc_decprot_attributes etzpc_get_decprot(uint32_t decprot_id)
+{
+	uintptr_t offset = 4U * (decprot_id / IDS_PER_DECPROT_REGS);
+	uint32_t shift = (decprot_id % IDS_PER_DECPROT_REGS) << DECPROT_SHIFT;
+	uintptr_t base_decprot = etzpc_dev.base + offset;
+	uint32_t value;
+
+	assert(valid_decprot_id(decprot_id));
+
+	value = (mmio_read_32(base_decprot + ETZPC_DECPROT0) >> shift) &
+		ETZPC_DECPROT0_MASK;
+
+	return (enum etzpc_decprot_attributes)value;
+}
+
+/*
+ * etzpc_lock_decprot : Lock access to the DECPROT attribute
+ * decprot_id : ID of the IP
+ */
+void etzpc_lock_decprot(uint32_t decprot_id)
+{
+	uintptr_t offset = 4U * (decprot_id / IDS_PER_DECPROT_LOCK_REGS);
+	uint32_t shift = BIT(decprot_id % IDS_PER_DECPROT_LOCK_REGS);
+	uintptr_t base_decprot = etzpc_dev.base + offset;
+
+	assert(valid_decprot_id(decprot_id));
+
+	mmio_write_32(base_decprot + ETZPC_DECPROT_LOCK0, shift);
+}
+
+/*
+ * etzpc_configure_tzma : Configure the target TZMA read only size
+ * tzma_id : ID of the memory
+ * tzma_value : read-only size
+ */
+void etzpc_configure_tzma(uint32_t tzma_id, uint16_t tzma_value)
+{
+	assert(valid_tzma_id(tzma_id));
+
+	mmio_write_32(etzpc_dev.base + ETZPC_TZMA0_SIZE +
+		      (sizeof(uint32_t) * tzma_id), tzma_value);
+}
+
+/*
+ * etzpc_get_tzma : Get the target TZMA read only size
+ * tzma_id : TZMA ID
+ * return : Size of read only size
+ */
+uint16_t etzpc_get_tzma(uint32_t tzma_id)
+{
+	assert(valid_tzma_id(tzma_id));
+
+	return (uint16_t)mmio_read_32(etzpc_dev.base + ETZPC_TZMA0_SIZE +
+				      (sizeof(uint32_t) * tzma_id));
+}
+
+/*
+ * etzpc_lock_tzma : Lock the target TZMA
+ * tzma_id : TZMA ID
+ */
+void etzpc_lock_tzma(uint32_t tzma_id)
+{
+	assert(valid_tzma_id(tzma_id));
+
+	mmio_setbits_32(etzpc_dev.base + ETZPC_TZMA0_SIZE +
+			(sizeof(uint32_t) * tzma_id), ETZPC_TZMA0_SIZE_LOCK);
+}
+
+/*
+ * etzpc_get_lock_tzma : Return the lock status of the target TZMA
+ * tzma_id : TZMA ID
+ * return : True if TZMA is locked, false otherwise
+ */
+bool etzpc_get_lock_tzma(uint32_t tzma_id)
+{
+	uint32_t tzma_size;
+
+	assert(valid_tzma_id(tzma_id));
+
+	tzma_size = mmio_read_32(etzpc_dev.base + ETZPC_TZMA0_SIZE +
+				 (sizeof(uint32_t) * tzma_id));
+
+	return (tzma_size & ETZPC_TZMA0_SIZE_LOCK) != 0;
+}
+
+/*
+ * etzpc_get_num_per_sec : Return the DECPROT ID limit value
+ */
+uint8_t etzpc_get_num_per_sec(void)
+{
+	return etzpc_dev.num_per_sec;
+}
+
+/*
+ * etzpc_get_revision : Return the ETZPC IP revision
+ */
+uint8_t etzpc_get_revision(void)
+{
+	return etzpc_dev.revision;
+}
+
+/*
+ * etzpc_get_base_address : Return the ETZPC IP base address
+ */
+uintptr_t etzpc_get_base_address(void)
+{
+	return etzpc_dev.base;
+}
+
+/*
+ * etzpc_init : Initialize the ETZPC driver
+ * Return 0 on success and a negative errno on failure
+ */
+int etzpc_init(void)
+{
+	uint32_t hwcfg;
+	int node;
+	struct dt_node_info etzpc_info;
+
+	node = dt_get_node(&etzpc_info, -1, ETZPC_COMPAT);
+	if (node < 0) {
+		return -EIO;
+	}
+
+	/* Check ETZPC is secure only */
+	if (etzpc_info.status != DT_SECURE) {
+		return -EACCES;
+	}
+
+	etzpc_dev.base = etzpc_info.base;
+
+	hwcfg = mmio_read_32(etzpc_dev.base + ETZPC_HWCFGR);
+
+	etzpc_dev.num_tzma = (uint8_t)(hwcfg >> ETZPC_HWCFGR_NUM_TZMA_SHIFT);
+	etzpc_dev.num_per_sec = (uint8_t)(hwcfg >>
+					  ETZPC_HWCFGR_NUM_PER_SEC_SHIFT);
+	etzpc_dev.num_ahb_sec = (uint8_t)(hwcfg >>
+					  ETZPC_HWCFGR_NUM_AHB_SEC_SHIFT);
+	etzpc_dev.chunck_size = (uint8_t)(hwcfg >>
+					  ETZPC_HWCFGR_CHUNCKS1N4_SHIFT);
+
+	etzpc_dev.revision = mmio_read_8(etzpc_dev.base + ETZPC_VERR);
+
+	VERBOSE("ETZPC version 0x%x", etzpc_dev.revision);
+
+	return 0;
+}

include/drivers/st/etzpc.h

@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2017-2020, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef DRIVERS_ST_ETZPC_H
+#define DRIVERS_ST_ETZPC_H
+
+/* Define security level for each peripheral (DECPROT) */
+enum etzpc_decprot_attributes {
+	ETZPC_DECPROT_S_RW = 0,
+	ETZPC_DECPROT_NS_R_S_W = 1,
+	ETZPC_DECPROT_MCU_ISOLATION = 2,
+	ETZPC_DECPROT_NS_RW = 3,
+	ETZPC_DECPROT_MAX = 4,
+};
+
+void etzpc_configure_decprot(uint32_t decprot_id,
+			     enum etzpc_decprot_attributes decprot_attr);
+enum etzpc_decprot_attributes etzpc_get_decprot(uint32_t decprot_id);
+void etzpc_lock_decprot(uint32_t decprot_id);
+
+void etzpc_configure_tzma(uint32_t tzma_id, uint16_t tzma_value);
+uint16_t etzpc_get_tzma(uint32_t tzma_id);
+void etzpc_lock_tzma(uint32_t tzma_id);
+bool etzpc_get_lock_tzma(uint32_t tzma_id);
+
+uint8_t etzpc_get_num_per_sec(void);
+uint8_t etzpc_get_revision(void);
+uintptr_t etzpc_get_base_address(void);
+
+int etzpc_init(void);
+
+#endif /* DRIVERS_ST_ETZPC_H */

include/dt-bindings/soc/st,stm32-etzpc.h

@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2017-2020, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+ */
+
+#ifndef _DT_BINDINGS_STM32_ETZPC_H
+#define _DT_BINDINGS_STM32_ETZPC_H
+
+/* DECPROT modes */
+#define DECPROT_S_RW		0x0
+#define DECPROT_NS_R_S_W	0x1
+#define DECPROT_MCU_ISOLATION	0x2
+#define DECPROT_NS_RW		0x3
+
+/* DECPROT lock */
+#define DECPROT_UNLOCK		0x0
+#define DECPROT_LOCK		0x1
+
+#endif /* _DT_BINDINGS_STM32_ETZPC_H */