diff --git a/Makefile b/Makefile
index 39e8a0046..03f9fc6d8 100644
--- a/Makefile
+++ b/Makefile
@@ -779,6 +779,7 @@ $(eval $(call assert_boolean,GENERATE_COT))
 $(eval $(call assert_boolean,GICV2_G0_FOR_EL3))
 $(eval $(call assert_boolean,HANDLE_EA_EL3_FIRST))
 $(eval $(call assert_boolean,HW_ASSISTED_COHERENCY))
+$(eval $(call assert_boolean,INVERTED_MEMMAP))
 $(eval $(call assert_boolean,MEASURED_BOOT))
 $(eval $(call assert_boolean,NS_TIMER_SWITCH))
 $(eval $(call assert_boolean,OVERRIDE_LIBC))
@@ -1120,7 +1121,7 @@ romlib.bin: libraries
 
 # Call print_memory_map tool
 memmap: all
-	${Q}${PYTHON} $(PRINT_MEMORY_MAP) $(BUILD_PLAT)
+	${Q}${PYTHON} ${PRINT_MEMORY_MAP} ${BUILD_PLAT} ${INVERTED_MEMMAP}
 
 doc:
 	@echo "  BUILD DOCUMENTATION"
diff --git a/docs/getting_started/build-options.rst b/docs/getting_started/build-options.rst
index 7ee34c985..da5dcbf89 100644
--- a/docs/getting_started/build-options.rst
+++ b/docs/getting_started/build-options.rst
@@ -340,6 +340,11 @@ Common build options
    translation library (xlat tables v2) must be used; version 1 of translation
    library is not supported.
 
+-  ``INVERTED_MEMMAP``: memmap tool print by default lower addresses at the
+   bottom, higher addresses at the top. This buid flag can be set to '1' to
+   invert this behavior. Lower addresses will be printed at the top and higher
+   addresses at the bottom.
+
 -  ``JUNO_AARCH32_EL3_RUNTIME``: This build flag enables you to execute EL3
    runtime software in AArch32 mode, which is required to run AArch32 on Juno.
    By default this flag is set to '0'. Enabling this flag builds BL1 and BL2 in
diff --git a/tools/memory/print_memory_map.py b/tools/memory/print_memory_map.py
index 35cccd38c..8a84018e7 100755
--- a/tools/memory/print_memory_map.py
+++ b/tools/memory/print_memory_map.py
@@ -1,6 +1,6 @@
 #!/usr/bin/env python3
 #
-# Copyright (c) 2019, Arm Limited. All rights reserved.
+# Copyright (c) 2019-2020, Arm Limited. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -22,6 +22,7 @@ blx_symbols = ['__BL1_RAM_START__', '__BL1_RAM_END__',
                 '__DATA_START__', '__DATA_END__',
                 '__STACKS_START__', '__STACKS_END__',
                 '__BSS_END',
+                '__COHERENT_RAM_START__', '__COHERENT_RAM_END__',
                ]
 
 # Regex to extract address from map file
@@ -31,8 +32,11 @@ address_pattern = re.compile(r"\b0x\w*")
 address_list = []
 
 # Get the directory from command line or use a default one
+inverted_print = True
 if len(sys.argv) >= 2:
     build_dir = sys.argv[1]
+    if len(sys.argv) >= 3:
+        inverted_print = sys.argv[2] == '0'
 else:
     build_dir = 'build/fvp/debug'
 
@@ -43,7 +47,10 @@ for image in bl_images:
         with open (file_path, 'rt') as mapfile:
             for line in mapfile:
                 for symbol in blx_symbols:
-                    if line.find(symbol) > 0 and line.find("ASSERT") < 0:
+                    # Regex to find symbol definition
+                    line_pattern = re.compile(r"\b0x\w*\s*" + symbol + "\s= .")
+                    match = line_pattern.search(line)
+                    if match:
                         # Extract address from line
                         match = address_pattern.search(line)
                         if match:
@@ -52,17 +59,21 @@ for image in bl_images:
 # Sort by address
 address_list.sort(key=operator.itemgetter(0))
 
+# Invert list for lower address at bottom
+if inverted_print:
+    address_list = reversed(address_list)
+
 # Generate memory view
-print('{:-^87}'.format('Memory Map from: ' + build_dir))
-for address in reversed(address_list):
+print('{:-^93}'.format('Memory Map from: ' + build_dir))
+for address in address_list:
     if "bl1" in address[2]:
-        print(address[0], '+{:-^20}+ |{:^20}| |{:^20}|'.format(address[1], '', ''))
+        print(address[0], '+{:-^22}+ |{:^22}| |{:^22}|'.format(address[1], '', ''))
     elif "bl2" in address[2]:
-        print(address[0], '|{:^20}| +{:-^20}+ |{:^20}|'.format('', address[1], ''))
+        print(address[0], '|{:^22}| +{:-^22}+ |{:^22}|'.format('', address[1], ''))
     elif "bl31" in address[2]:
-        print(address[0], '|{:^20}| |{:^20}| +{:-^20}+'.format('', '', address[1]))
+        print(address[0], '|{:^22}| |{:^22}| +{:-^22}+'.format('', '', address[1]))
     else:
-        print(address[0], '|{:^20}| |{:^20}| +{:-^20}+'.format('', '', address[1]))
+        print(address[0], '|{:^22}| |{:^22}| +{:-^22}+'.format('', '', address[1]))
 
-print('{:^20}{:_^20}   {:_^20}   {:_^20}'.format('', '', '', ''))
-print('{:^20}{:^20}   {:^20}   {:^20}'.format('address', 'bl1', 'bl2', 'bl31'))
+print('{:^20}{:_^22}   {:_^22}   {:_^22}'.format('', '', '', ''))
+print('{:^20}{:^22}   {:^22}   {:^22}'.format('address', 'bl1', 'bl2', 'bl31'))