Merge pull request #462 from soby-mathew/sm/runtime_console

Enable BL31 to configure a runtime console

bl31/bl31_main.c

@@ -77,7 +77,7 @@ void bl31_main(void)
 	/* Perform remaining generic architectural setup from EL3 */
 	bl31_arch_setup();
 
-	/* Perform platform setup in BL1 */
+	/* Perform platform setup in BL31 */
 	bl31_platform_setup();
 
 	/* Initialise helper libraries */
@@ -109,6 +109,12 @@ void bl31_main(void)
 	 * corresponding to the desired security state after the next ERET.
 	 */
 	bl31_prepare_next_image_entry();
+
+	/*
+	 * Perform any platform specific runtime setup prior to cold boot exit
+	 * from BL31
+	 */
+	bl31_plat_runtime_setup();
 }
 
 /*******************************************************************************

docs/porting-guide.md

@@ -1172,6 +1172,21 @@ In ARM standard platforms, this function does the following:
 *   Detects the system topology.
 
 
+### Function : bl31_plat_runtime_setup() [optional]
+
+    Argument : void
+    Return   : void
+
+The purpose of this function is allow the platform to perform any BL31 runtime
+setup just prior to BL31 exit during cold boot. The default weak
+implementation of this function will invoke `console_uninit()` which will
+suppress any BL31 runtime logs.
+
+In ARM Standard platforms, this function will initialize the BL31 runtime
+console which will cause all further BL31 logs to be output to the
+runtime console.
+
+
 ### Function : bl31_get_next_image_info() [mandatory]
 
     Argument : unsigned int

drivers/console/console.S

@@ -30,6 +30,7 @@
 #include <asm_macros.S>
 
 	.globl	console_init
+	.globl	console_uninit
 	.globl	console_putc
 	.globl	console_getc
 
@@ -66,6 +67,20 @@ init_fail:
 	ret
 endfunc console_init
 
+	/* -----------------------------------------------
+	 * void console_uninit(void)
+	 * Function to finish the use of console driver.
+	 * It sets the console_base as NULL so that any
+	 * further invocation of `console_putc` or
+	 * `console_getc` APIs would return error.
+	 * -----------------------------------------------
+	 */
+func console_uninit
+	mov	x0, #0
+	adrp	x3, console_base
+	str	x0, [x3, :lo12:console_base]
+endfunc console_uninit
+
 	/* ---------------------------------------------
 	 * int console_putc(int c)
 	 * Function to output a character over the

include/drivers/console.h

@@ -35,6 +35,7 @@
 
 int console_init(uintptr_t base_addr,
 		unsigned int uart_clk, unsigned int baud_rate);
+void console_uninit(void);
 int console_putc(int c);
 int console_getc(void);
 

include/plat/arm/board/common/board_css_def.h

@@ -74,8 +74,11 @@
 #define PLAT_ARM_BOOT_UART_BASE			SOC_CSS_UART0_BASE
 #define PLAT_ARM_BOOT_UART_CLK_IN_HZ		SOC_CSS_UART0_CLK_IN_HZ
 
-#define PLAT_ARM_CRASH_UART_BASE		SOC_CSS_UART1_BASE
+#define PLAT_ARM_BL31_RUN_UART_BASE		SOC_CSS_UART1_BASE
-#define PLAT_ARM_CRASH_UART_CLK_IN_HZ		SOC_CSS_UART1_CLK_IN_HZ
+#define PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ	SOC_CSS_UART1_CLK_IN_HZ
+
+#define PLAT_ARM_CRASH_UART_BASE		PLAT_ARM_BL31_RUN_UART_BASE
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ		PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ
 
 #define PLAT_ARM_TSP_UART_BASE			V2M_IOFPGA_UART0_BASE
 #define PLAT_ARM_TSP_UART_CLK_IN_HZ		V2M_IOFPGA_UART0_CLK_IN_HZ

include/plat/arm/common/plat_arm.h

@@ -175,6 +175,7 @@ void arm_bl2u_plat_arch_setup(void);
 void arm_bl31_early_platform_setup(bl31_params_t *from_bl2,
 				void *plat_params_from_bl2);
 void arm_bl31_platform_setup(void);
+void arm_bl31_plat_runtime_setup(void);
 void arm_bl31_plat_arch_setup(void);
 
 /* TSP utility functions */

include/plat/common/platform.h

@@ -216,6 +216,7 @@ void bl31_early_platform_setup(struct bl31_params *from_bl2,
 				void *plat_params_from_bl2);
 void bl31_plat_arch_setup(void);
 void bl31_platform_setup(void);
+void bl31_plat_runtime_setup(void);
 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type);
 
 /*******************************************************************************

plat/arm/board/fvp/include/platform_def.h

@@ -78,8 +78,11 @@
 #define PLAT_ARM_BOOT_UART_BASE		V2M_IOFPGA_UART0_BASE
 #define PLAT_ARM_BOOT_UART_CLK_IN_HZ	V2M_IOFPGA_UART0_CLK_IN_HZ
 
-#define PLAT_ARM_CRASH_UART_BASE	V2M_IOFPGA_UART1_BASE
+#define PLAT_ARM_BL31_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
-#define PLAT_ARM_CRASH_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
+#define PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
+
+#define PLAT_ARM_CRASH_UART_BASE	PLAT_ARM_BL31_RUN_UART_BASE
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ	PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ
 
 #define PLAT_ARM_TSP_UART_BASE		V2M_IOFPGA_UART2_BASE
 #define PLAT_ARM_TSP_UART_CLK_IN_HZ	V2M_IOFPGA_UART2_CLK_IN_HZ

plat/arm/common/arm_bl31_setup.c

@@ -223,11 +223,27 @@ void arm_bl31_platform_setup(void)
 	plat_arm_pwrc_setup();
 }
 
+/*******************************************************************************
+ * Perform any BL3-1 platform runtime setup prior to BL3-1 exit common to ARM
+ * standard platforms
+ ******************************************************************************/
+void arm_bl31_plat_runtime_setup(void)
+{
+	/* Initialize the runtime console */
+	console_init(PLAT_ARM_BL31_RUN_UART_BASE, PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ,
+			ARM_CONSOLE_BAUDRATE);
+}
+
 void bl31_platform_setup(void)
 {
 	arm_bl31_platform_setup();
 }
 
+void bl31_plat_runtime_setup(void)
+{
+	arm_bl31_plat_runtime_setup();
+}
+
 /*******************************************************************************
  * Perform the very early platform specific architectural setup here. At the
  * moment this is only intializes the mmu in a quick and dirty way.

plat/arm/common/arm_pm.c

@@ -158,7 +158,7 @@ int arm_validate_ns_entrypoint(uintptr_t entrypoint)
  *****************************************************************************/
 void arm_system_pwr_domain_resume(void)
 {
-	console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ,
+	console_init(PLAT_ARM_BL31_RUN_UART_BASE, PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ,
 						ARM_CONSOLE_BAUDRATE);
 
 	/* Assert system power domain is available on the platform */

plat/common/aarch64/plat_common.c

@@ -28,16 +28,18 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 #include <assert.h>
+#include <console.h>
 #include <platform.h>
 #include <xlat_tables.h>
 
 /*
- * The following 2 platform setup functions are weakly defined. They
+ * The following platform setup functions are weakly defined. They
  * provide typical implementations that may be re-used by multiple
  * platforms but may also be overridden by a platform if required.
  */
 #pragma weak bl31_plat_enable_mmu
 #pragma weak bl32_plat_enable_mmu
+#pragma weak bl31_plat_runtime_setup
 
 void bl31_plat_enable_mmu(uint32_t flags)
 {
@@ -49,6 +51,15 @@ void bl32_plat_enable_mmu(uint32_t flags)
 	enable_mmu_el1(flags);
 }
 
+void bl31_plat_runtime_setup(void)
+{
+	/*
+	 * Finish the use of console driver in BL31 so that any runtime logs
+	 * from BL31 will be suppressed.
+	 */
+	console_uninit();
+}
+
 #if !ENABLE_PLAT_COMPAT
 /*
  * Helper function for platform_get_pos() when platform compatibility is