refactor(xilinx): move enum to common place

Moved IOCTL enum from ZynqMP to common place so that it can be used
for all the platforms.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Change-Id: I6ad992da30f2def9f46c8ba79753d79ed00fe024

plat/xilinx/common/include/pm_defs.h

@@ -46,13 +46,6 @@
 #define PM_LOAD_PDI			0x701U
 #define PM_LOAD_GET_HANDOFF_PARAMS	0x70BU
 
-/* IOCTL IDs for clock driver */
-#define IOCTL_SET_PLL_FRAC_MODE		8U
-#define	IOCTL_GET_PLL_FRAC_MODE		9U
-#define	IOCTL_SET_PLL_FRAC_DATA		10U
-#define	IOCTL_GET_PLL_FRAC_DATA		11U
-#define	IOCTL_SET_SGI			25U
-
 /* System shutdown macros */
 #define	XPM_SHUTDOWN_TYPE_SHUTDOWN	0U
 #define	XPM_SHUTDOWN_TYPE_RESET		1U
@@ -66,6 +59,44 @@
  * Enum definitions
  ********************************************************************/
 
+//ioctl id
+enum {
+	IOCTL_GET_RPU_OPER_MODE = 0,
+	IOCTL_SET_RPU_OPER_MODE = 1,
+	IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
+	IOCTL_TCM_COMB_CONFIG = 3,
+	IOCTL_SET_TAPDELAY_BYPASS = 4,
+	IOCTL_SET_SGMII_MODE = 5,
+	IOCTL_SD_DLL_RESET = 6,
+	IOCTL_SET_SD_TAPDELAY = 7,
+	 /* Ioctl for clock driver */
+	IOCTL_SET_PLL_FRAC_MODE = 8,
+	IOCTL_GET_PLL_FRAC_MODE = 9,
+	IOCTL_SET_PLL_FRAC_DATA = 10,
+	IOCTL_GET_PLL_FRAC_DATA = 11,
+	IOCTL_WRITE_GGS = 12,
+	IOCTL_READ_GGS = 13,
+	IOCTL_WRITE_PGGS = 14,
+	IOCTL_READ_PGGS = 15,
+	/* IOCTL for ULPI reset */
+	IOCTL_ULPI_RESET = 16,
+	/* Set healthy bit value */
+	IOCTL_SET_BOOT_HEALTH_STATUS = 17,
+	IOCTL_AFI = 18,
+	/* Probe counter read/write */
+	IOCTL_PROBE_COUNTER_READ = 19,
+	IOCTL_PROBE_COUNTER_WRITE = 20,
+	IOCTL_OSPI_MUX_SELECT = 21,
+	/* IOCTL for USB power request */
+	IOCTL_USB_SET_STATE = 22,
+	/* IOCTL to get last reset reason */
+	IOCTL_GET_LAST_RESET_REASON = 23,
+	/* AI engine NPI ISR clear */
+	IOCTL_AIE_ISR_CLEAR = 24,
+	/* Register SGI to TF-A */
+	IOCTL_SET_SGI = 25,
+};
+
 /**
  * @PM_PLL_PARAM_DIV2:		Enable for divide by 2 function inside the PLL
  * @PM_PLL_PARAM_FBDIV:		Feedback divisor integer portion for the PLL

plat/xilinx/versal_net/include/plat_private.h

@@ -43,6 +43,4 @@ int32_t sip_svc_setup_init(void);
  */
 int request_intr_type_el3(uint32_t irq, interrupt_type_handler_t fiq_handler);
 
-#define IOCTL_OSPI_MUX_SELECT		(21U)
-
 #endif /* PLAT_PRIVATE_H */

plat/xilinx/zynqmp/pm_service/pm_api_ioctl.h

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2022-2023, Advanced Micro Devices, Inc. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -13,44 +14,6 @@
 
 #include "pm_common.h"
 
-//ioctl id
-enum {
-	IOCTL_GET_RPU_OPER_MODE = 0,
-	IOCTL_SET_RPU_OPER_MODE = 1,
-	IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
-	IOCTL_TCM_COMB_CONFIG = 3,
-	IOCTL_SET_TAPDELAY_BYPASS = 4,
-	IOCTL_SET_SGMII_MODE = 5,
-	IOCTL_SD_DLL_RESET = 6,
-	IOCTL_SET_SD_TAPDELAY = 7,
-	 /* Ioctl for clock driver */
-	IOCTL_SET_PLL_FRAC_MODE = 8,
-	IOCTL_GET_PLL_FRAC_MODE = 9,
-	IOCTL_SET_PLL_FRAC_DATA = 10,
-	IOCTL_GET_PLL_FRAC_DATA = 11,
-	IOCTL_WRITE_GGS = 12,
-	IOCTL_READ_GGS = 13,
-	IOCTL_WRITE_PGGS = 14,
-	IOCTL_READ_PGGS = 15,
-	/* IOCTL for ULPI reset */
-	IOCTL_ULPI_RESET = 16,
-	/* Set healthy bit value */
-	IOCTL_SET_BOOT_HEALTH_STATUS = 17,
-	IOCTL_AFI = 18,
-	/* Probe counter read/write */
-	IOCTL_PROBE_COUNTER_READ = 19,
-	IOCTL_PROBE_COUNTER_WRITE = 20,
-	IOCTL_OSPI_MUX_SELECT = 21,
-	/* IOCTL for USB power request */
-	IOCTL_USB_SET_STATE = 22,
-	/* IOCTL to get last reset reason */
-	IOCTL_GET_LAST_RESET_REASON = 23,
-	/* AI engine NPI ISR clear */
-	IOCTL_AIE_ISR_CLEAR = 24,
-	/* Register SGI to ATF */
-	IOCTL_REGISTER_SGI = 25,
-};
-
 //RPU operation mode
 #define	PM_RPU_MODE_LOCKSTEP 0U
 #define	PM_RPU_MODE_SPLIT 1U