feat(mt8186): add DFD control in SiP service

DFD (Design for Debug) is a debugging tool, which scans flip-flops and dumps to internal RAM on the WDT reset. After system reboots, those values could be showed for debugging. BUG=b:222217317 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I659ea1e0789cf135a71a13b752edaa35123e0941
3 years ago · e46e9df0d0
6 changed files with 178 additions and 1 deletions
--- a/plat/mediatek/mt8186/drivers/dfd/plat_dfd.c
+++ b/plat/mediatek/mt8186/drivers/dfd/plat_dfd.c
@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <mtk_sip_svc.h>
+#include <plat_dfd.h>
+
+static bool dfd_enabled;
+static uint64_t dfd_base_addr;
+static uint64_t dfd_chain_length;
+static uint64_t dfd_cache_dump;
+
+static void dfd_setup(uint64_t base_addr, uint64_t chain_length,
+		      uint64_t cache_dump)
+{
+	mmio_write_32(MCUSYS_DFD_MAP, base_addr >> 24);
+	mmio_write_32(WDT_DEBUG_CTL, WDT_DEBUG_CTL_VAL_0);
+
+	sync_writel(DFD_INTERNAL_CTL, (BIT(0) | BIT(2)));
+
+	mmio_setbits_32(DFD_INTERNAL_CTL, BIT(13));
+	mmio_setbits_32(DFD_INTERNAL_CTL, BIT(3));
+	mmio_setbits_32(DFD_INTERNAL_CTL, (BIT(19) | BIT(20)));
+	mmio_write_32(DFD_INTERNAL_PWR_ON, (BIT(0) | BIT(1) | BIT(3)));
+	mmio_write_32(DFD_CHAIN_LENGTH0, chain_length);
+	mmio_write_32(DFD_INTERNAL_SHIFT_CLK_RATIO, 0);
+	mmio_write_32(DFD_INTERNAL_TEST_SO_0, DFD_INTERNAL_TEST_SO_0_VAL);
+	mmio_write_32(DFD_INTERNAL_NUM_OF_TEST_SO_GROUP, 1);
+
+	mmio_write_32(DFD_TEST_SI_0, DFD_TEST_SI_0_VAL);
+	mmio_write_32(DFD_TEST_SI_1, DFD_TEST_SI_1_VAL);
+
+	sync_writel(DFD_V30_CTL, 1);
+
+	mmio_write_32(DFD_V30_BASE_ADDR, (base_addr & 0xFFF00000));
+
+	/* setup global variables for suspend and resume */
+	dfd_enabled = true;
+	dfd_base_addr = base_addr;
+	dfd_chain_length = chain_length;
+	dfd_cache_dump = cache_dump;
+
+	if ((cache_dump & DFD_CACHE_DUMP_ENABLE) != 0UL) {
+		mmio_write_32(WDT_DEBUG_CTL, WDT_DEBUG_CTL_VAL_1);
+		sync_writel(DFD_V35_ENALBE, 1);
+		sync_writel(DFD_V35_TAP_NUMBER, DFD_V35_TAP_NUMBER_VAL);
+		sync_writel(DFD_V35_TAP_EN, DFD_V35_TAP_EN_VAL);
+		sync_writel(DFD_V35_SEQ0_0, DFD_V35_SEQ0_0_VAL);
+
+		if (cache_dump & DFD_PARITY_ERR_TRIGGER) {
+			sync_writel(DFD_HW_TRIGGER_MASK, DFD_HW_TRIGGER_MASK_VAL);
+			mmio_setbits_32(DFD_INTERNAL_CTL, BIT(4));
+		}
+	}
+	dsbsy();
+}
+
+void dfd_resume(void)
+{
+	if (dfd_enabled == true) {
+		dfd_setup(dfd_base_addr, dfd_chain_length, dfd_cache_dump);
+	}
+}
+
+uint64_t dfd_smc_dispatcher(uint64_t arg0, uint64_t arg1,
+			    uint64_t arg2, uint64_t arg3)
+{
+	uint64_t ret = 0L;
+
+	switch (arg0) {
+	case PLAT_MTK_DFD_SETUP_MAGIC:
+		INFO("[%s] DFD setup call from kernel\n", __func__);
+		dfd_setup(arg1, arg2, arg3);
+		break;
+	case PLAT_MTK_DFD_READ_MAGIC:
+		/* only allow to access DFD register base + 0x200 */
+		if (arg1 <= 0x200) {
+			ret = mmio_read_32(MISC1_CFG_BASE + arg1);
+		}
+		break;
+	case PLAT_MTK_DFD_WRITE_MAGIC:
+		/* only allow to access DFD register base + 0x200 */
+		if (arg1 <= 0x200) {
+			sync_writel(MISC1_CFG_BASE + arg1, arg2);
+		}
+		break;
+	default:
+		ret = MTK_SIP_E_INVALID_PARAM;
+		break;
+	}
+
+	return ret;
+}
--- a/plat/mediatek/mt8186/drivers/dfd/plat_dfd.h
+++ b/plat/mediatek/mt8186/drivers/dfd/plat_dfd.h
@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2022, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_DFD_H
+#define PLAT_DFD_H
+
+#include <arch_helpers.h>
+#include <lib/mmio.h>
+#include <platform_def.h>
+
+#define sync_writel(addr, val)	do { mmio_write_32((addr), (val)); \
+				dsbsy(); \
+				} while (0)
+
+#define PLAT_MTK_DFD_SETUP_MAGIC		(0x99716150)
+#define PLAT_MTK_DFD_READ_MAGIC			(0x99716151)
+#define PLAT_MTK_DFD_WRITE_MAGIC		(0x99716152)
+
+#define MCU_BIU_BASE				(MCUCFG_BASE)
+#define MISC1_CFG_BASE				(MCU_BIU_BASE + 0xA040)
+
+#define DFD_INTERNAL_CTL			(MISC1_CFG_BASE + 0x00)
+#define DFD_INTERNAL_PWR_ON			(MISC1_CFG_BASE + 0x08)
+#define DFD_CHAIN_LENGTH0			(MISC1_CFG_BASE + 0x0C)
+#define DFD_INTERNAL_SHIFT_CLK_RATIO		(MISC1_CFG_BASE + 0x10)
+#define DFD_INTERNAL_TEST_SO_0			(MISC1_CFG_BASE + 0x28)
+#define DFD_INTERNAL_NUM_OF_TEST_SO_GROUP	(MISC1_CFG_BASE + 0x30)
+#define DFD_V30_CTL				(MISC1_CFG_BASE + 0x48)
+#define DFD_V30_BASE_ADDR			(MISC1_CFG_BASE + 0x4C)
+#define DFD_TEST_SI_0				(MISC1_CFG_BASE + 0x58)
+#define DFD_TEST_SI_1				(MISC1_CFG_BASE + 0x5C)
+#define DFD_HW_TRIGGER_MASK			(MISC1_CFG_BASE + 0xBC)
+
+#define DFD_V35_ENALBE				(MCU_BIU_BASE + 0xA0A8)
+#define DFD_V35_TAP_NUMBER			(MCU_BIU_BASE + 0xA0AC)
+#define DFD_V35_TAP_EN				(MCU_BIU_BASE + 0xA0B0)
+#define DFD_V35_SEQ0_0				(MCU_BIU_BASE + 0xA0C0)
+#define DFD_V35_SEQ0_1				(MCU_BIU_BASE + 0xA0C4)
+
+#define DFD_CACHE_DUMP_ENABLE			(1U)
+#define DFD_PARITY_ERR_TRIGGER			(2U)
+
+#define MCUSYS_DFD_MAP				(0x10001390)
+#define WDT_DEBUG_CTL				(0x10007048)
+
+#define WDT_DEBUG_CTL_VAL_0			(0x950603A0)
+#define DFD_INTERNAL_TEST_SO_0_VAL		(0x3B)
+#define DFD_TEST_SI_0_VAL			(0x108)
+#define DFD_TEST_SI_1_VAL			(0x20200000)
+
+#define WDT_DEBUG_CTL_VAL_1			(0x95063E80)
+#define DFD_V35_TAP_NUMBER_VAL			(0xA)
+#define DFD_V35_TAP_EN_VAL			(0x3FF)
+#define DFD_V35_SEQ0_0_VAL			(0x63668820)
+#define DFD_HW_TRIGGER_MASK_VAL			(0xC)
+
+void dfd_resume(void);
+uint64_t dfd_smc_dispatcher(uint64_t arg0, uint64_t arg1,
+			    uint64_t arg2, uint64_t arg3);
+
+#endif /* PLAT_DFD_H */
--- a/plat/mediatek/mt8186/include/plat_sip_calls.h
+++ b/plat/mediatek/mt8186/include/plat_sip_calls.h
@ -10,6 +10,10 @@
 /*******************************************************************************
 * Plat SiP function constants
 ******************************************************************************/
-#define MTK_PLAT_SIP_NUM_CALLS    0
+#define MTK_PLAT_SIP_NUM_CALLS		(2)
+
+/* DFD */
+#define MTK_SIP_KERNEL_DFD_AARCH32	(0x82000205)
+#define MTK_SIP_KERNEL_DFD_AARCH64	(0xC2000205)

 #endif /* PLAT_SIP_CALLS_H */
--- a/plat/mediatek/mt8186/plat_pm.c
+++ b/plat/mediatek/mt8186/plat_pm.c
@ -13,6 +13,7 @@
 #include <mt_gic_v3.h>
 #include <mtspmc.h>
 #include <plat/common/platform.h>
+#include <plat_dfd.h>
 #include <plat_mtk_lpm.h>
 #include <plat_params.h>
 #include <plat_pm.h>
@ -164,6 +165,8 @@ static void plat_mcusys_pwron_common(unsigned int cpu,
 	mt_gic_distif_restore();
 	gic_sgi_restore_all();

+	dfd_resume();
+
 	(void)plat_mt_pm_invoke(plat_mt_pm->pwr_mcusys_on_finished, cpu, state);
 }

--- a/plat/mediatek/mt8186/plat_sip_calls.c
+++ b/plat/mediatek/mt8186/plat_sip_calls.c
@ -8,6 +8,7 @@
 #include <common/runtime_svc.h>
 #include <mt_spm_vcorefs.h>
 #include <mtk_sip_svc.h>
+#include <plat_dfd.h>
 #include "plat_sip_calls.h"

 uintptr_t mediatek_plat_sip_handler(uint32_t smc_fid,
@ -27,6 +28,11 @@ uintptr_t mediatek_plat_sip_handler(uint32_t smc_fid,
 		ret = spm_vcorefs_args(x1, x2, x3, (uint64_t *)&x4);
 		SMC_RET2(handle, ret, x4);
 		break;
+	case MTK_SIP_KERNEL_DFD_AARCH32:
+	case MTK_SIP_KERNEL_DFD_AARCH64:
+		ret = dfd_smc_dispatcher(x1, x2, x3, x4);
+		SMC_RET1(handle, ret);
+		break;
 	default:
 		ERROR("%s: unhandled SMC (0x%x)\n", __func__, smc_fid);
 		break;
--- a/plat/mediatek/mt8186/platform.mk
+++ b/plat/mediatek/mt8186/platform.mk
@ -15,6 +15,7 @@ PLAT_INCLUDES := -I${MTK_PLAT}/common/                            \
 		 -I${MTK_PLAT}/common/lpm/                        \
                 -I${MTK_PLAT_SOC}/drivers/spm/                   \
                 -I${MTK_PLAT_SOC}/drivers/dcm/                   \
+                 -I${MTK_PLAT_SOC}/drivers/dfd/                    \
                 -I${MTK_PLAT_SOC}/drivers/emi_mpu/               \
                 -I${MTK_PLAT_SOC}/drivers/gpio/               \
                 -I${MTK_PLAT_SOC}/drivers/mcdi/                  \
@ -58,6 +59,7 @@ BL31_SOURCES += common/desc_image_load.c                              \
                ${MTK_PLAT_SOC}/bl31_plat_setup.c                     \
                ${MTK_PLAT_SOC}/drivers/dcm/mtk_dcm.c                 \
                ${MTK_PLAT_SOC}/drivers/dcm/mtk_dcm_utils.c           \
+                ${MTK_PLAT_SOC}/drivers/dfd/plat_dfd.c                \
                ${MTK_PLAT_SOC}/drivers/emi_mpu/emi_mpu.c             \
                ${MTK_PLAT_SOC}/drivers/gpio/mtgpio.c                 \
                ${MTK_PLAT_SOC}/drivers/mcdi/mt_cpu_pm.c              \