fix(ras): remove RAS_FFH_SUPPORT and introduce FFH_SUPPORT

This patch removes RAS_FFH_SUPPORT macro which is the combination of
ENABLE_FEAT_RAS and HANDLE_EA_EL3_FIRST_NS. Instead introduce an
internal macro FFH_SUPPORT which gets enabled when platforms wants
to enable lower EL EA handling at EL3. The internal macro FFH_SUPPORT
will be automatically enabled if HANDLE_EA_EL3_FIRST_NS is enabled.
FFH_SUPPORT along with ENABLE_FEAT_RAS will be used in source files
to provide equivalent check which was provided by RAS_FFH_SUPPORT
earlier. In generic code we needed a macro which could abstract both
HANDLE_EA_EL3_FIRST_NS and RAS_FFH_SUPPORT macros that had limitations.
Former was tied up with NS world only while the latter was tied to RAS
feature.

This is to allow Secure/Realm world to have their own FFH macros
in future.

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ie5692ccbf462f5dcc3f005a5beea5aa35124ac73

Makefile

@@ -809,6 +809,14 @@ else
 	BL2_RUNS_AT_EL3	:=	0
 endif
 
+# This internal flag is set to 1 when Firmware First handling of External aborts
+# is required by lowe ELs. Currently only NS requires this support.
+ifeq ($(HANDLE_EA_EL3_FIRST_NS),1)
+	FFH_SUPPORT := 1
+else
+	FFH_SUPPORT := 0
+endif
+
 $(eval $(call MAKE_PREREQ_DIR,${BUILD_PLAT}))
 
 ifeq (${ARM_ARCH_MAJOR},7)
@@ -970,18 +978,9 @@ endif
 # RAS_EXTENSION is deprecated, provide alternate build options
 ifeq ($(RAS_EXTENSION),1)
         $(error "RAS_EXTENSION is now deprecated, please use ENABLE_FEAT_RAS \
-        and RAS_FFH_SUPPORT instead")
+        and HANDLE_EA_EL3_FIRST_NS instead")
 endif
 
-# RAS firmware first handling requires that EAs are handled in EL3 first
-ifeq ($(RAS_FFH_SUPPORT),1)
-	ifneq ($(ENABLE_FEAT_RAS),1)
-                $(error For RAS_FFH_SUPPORT, ENABLE_FEAT_RAS must also be 1)
-	endif
-	ifneq ($(HANDLE_EA_EL3_FIRST_NS),1)
-                $(error For RAS_FFH_SUPPORT, HANDLE_EA_EL3_FIRST_NS must also be 1)
-	endif
-endif #(RAS_FFH_SUPPORT)
 
 # When FAULT_INJECTION_SUPPORT is used, require that FEAT_RAS is enabled
 ifeq ($(FAULT_INJECTION_SUPPORT),1)
@@ -1284,6 +1283,7 @@ $(eval $(call assert_booleans,\
 	ENABLE_SME_FOR_SWD \
 	ENABLE_SVE_FOR_SWD \
 	ENABLE_FEAT_RAS	\
+	FFH_SUPPORT	\
 	ERROR_DEPRECATED \
 	FAULT_INJECTION_SUPPORT \
 	GENERATE_COT \
@@ -1338,7 +1338,6 @@ $(eval $(call assert_booleans,\
 	ERRATA_ABI_SUPPORT \
 	ERRATA_NON_ARM_INTERCONNECT \
 	CONDITIONAL_CMO \
-	RAS_FFH_SUPPORT \
 	PSA_CRYPTO	\
 	ENABLE_CONSOLE_GETC \
 )))
@@ -1444,6 +1443,7 @@ $(eval $(call add_defines,\
 	ENABLE_SVE_FOR_NS \
 	ENABLE_SVE_FOR_SWD \
 	ENABLE_FEAT_RAS \
+	FFH_SUPPORT \
 	ENCRYPT_BL31 \
 	ENCRYPT_BL32 \
 	ERROR_DEPRECATED \
@@ -1461,7 +1461,6 @@ $(eval $(call add_defines,\
 	PROGRAMMABLE_RESET_ADDRESS \
 	PSCI_EXTENDED_STATE_ID \
 	PSCI_OS_INIT_MODE \
-	RAS_FFH_SUPPORT \
 	RESET_TO_BL31 \
 	SEPARATE_CODE_AND_RODATA \
 	SEPARATE_BL2_NOLOAD_REGION \

bl31/aarch64/ea_delegate.S

@@ -292,7 +292,7 @@ endfunc reflect_pending_async_ea_to_lower_el
  * x1: EA syndrome
  */
 func delegate_sync_ea
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS
 	/*
 	 * Check for Uncontainable error type. If so, route to the platform
 	 * fatal error handler rather than the generic EA one.
@@ -322,7 +322,7 @@ endfunc delegate_sync_ea
  * x1: EA syndrome
  */
 func delegate_async_ea
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS
 	/* Check Exception Class to ensure SError, as this function should
 	 * only be invoked for SError. If that is not the case, which implies
 	 * either an HW error or programming error, panic.

bl31/aarch64/runtime_exceptions.S

@@ -60,7 +60,7 @@
 	synchronize_errors
 	mrs	x30, ISR_EL1
 	tbz	x30, #ISR_A_SHIFT, 2f
-#if HANDLE_EA_EL3_FIRST_NS
+#if FFH_SUPPORT
 	mrs	x30, scr_el3
 	tst	x30, #SCR_EA_BIT
 	b.eq	1f
@@ -175,7 +175,7 @@ vector_entry fiq_sp_elx
 end_vector_entry fiq_sp_elx
 
 vector_entry serror_sp_elx
-#if HANDLE_EA_EL3_FIRST_NS
+#if FFH_SUPPORT
 	/*
 	 * This will trigger if the exception was taken due to SError in EL3 or
 	 * because of pending asynchronous external aborts from lower EL that got

docs/components/ras.rst

@@ -63,17 +63,19 @@ will be added in future**
 TF-A build options
 ==================
 
-- **ENABLE_FEAT_RAS**: Manage FEAT_RAS extension when switching the world.
-- **RAS_FFH_SUPPORT**: Pull in necessary framework and platform hooks for Firmware first
-  handling(FFH) of RAS errors.
+- **ENABLE_FEAT_RAS**: Enable RAS extension feature at EL3.
+- **HANDLE_EA_EL3_FIRST_NS**: Required for FFH
 - **RAS_TRAP_NS_ERR_REC_ACCESS**: Trap Non-secure access of RAS error record registers.
-- **RAS_EXTENSION**: Deprecated macro, equivalent to ENABLE_FEAT_RAS and RAS_FFH_SUPPORT
-  put together.
+- **RAS_EXTENSION**: Deprecated macro, equivalent to ENABLE_FEAT_RAS and
+  HANDLE_EA_EL3_FIRST_NS put together.
+
+RAS internal macros
+
+- **FFH_SUPPORT**: Gets enabled if **HANDLE_EA_EL3_FIRST_NS** is enabled.
 
 RAS feature has dependency on some other TF-A build flags
 
 - **EL3_EXCEPTION_HANDLING**: Required for FFH
-- **HANDLE_EA_EL3_FIRST_NS**: Required for FFH
 - **FAULT_INJECTION_SUPPORT**: Required for testing RAS feature on fvp platform
 
 RAS Framework
@@ -238,7 +240,7 @@ Engaging the RAS framework
 Enabling RAS support is a platform choice
 
 The RAS support in |TF-A| introduces a default implementation of
-``plat_ea_handler``, the External Abort handler in EL3. When ``RAS_FFH_SUPPORT``
+``plat_ea_handler``, the External Abort handler in EL3. When ``ENABLE_FEAT_RAS``
 is set to ``1``, it'll first call ``ras_ea_handler()`` function, which is the
 top-level RAS exception handler. ``ras_ea_handler`` is responsible for iterating
 to through platform-supplied error records, probe them, and when an error is

docs/getting_started/build-internals.rst

@@ -12,3 +12,10 @@ depends on certain options to be enabled or disabled.
    interest when Armv8.4-SecEL2 or RME extension is implemented.
    Default is 0 (disabled). This option will be set to 1 (enabled) when ``SPD=spmd``
    and ``SPMD_SPM_AT_SEL2`` is set or when ``ENABLE_RME`` is set to 1 (enabled).
+
+- ``FFH_SUPPORT``: This boolean option provides support to enable Firmware First
+  handling (FFH) of External aborts and SError interrupts originating from lower
+  ELs which gets trapped in EL3. This option will be set to 1 (enabled) if
+  ``HANDLE_EA_EL3_FIRST_NS`` is set. Currently only NS world routes EA to EL3 but
+  in future when Secure/Realm wants to use FFH then they can introduce new macros
+  which will enable this option implicitly.

docs/getting_started/build-options.rst

@@ -811,17 +811,13 @@ Common build options
 -  ``PSCI_OS_INIT_MODE``: Boolean flag to enable support for optional PSCI
    OS-initiated mode. This option defaults to 0.
 
--  ``ENABLE_FEAT_RAS``: Numeric value to enable Armv8.2 RAS features. RAS features
+-  ``ENABLE_FEAT_RAS``: Boolean flag to enable Armv8.2 RAS features. RAS features
    are an optional extension for pre-Armv8.2 CPUs, but are mandatory for Armv8.2
    or later CPUs. This flag can take the values 0 or 1. The default value is 0.
    NOTE: This flag enables use of IESB capability to reduce entry latency into
    EL3 even when RAS error handling is not performed on the platform. Hence this
    flag is recommended to be turned on Armv8.2 and later CPUs.
 
--  ``RAS_FFH_SUPPORT``: Support to enable Firmware first handling of RAS errors
-   originating from NS world. When ``RAS_FFH_SUPPORT`` is set to ``1``,
-   ``HANDLE_EA_EL3_FIRST_NS`` and ``ENABLE_FEAT_RAS`` must also be set to ``1``.
-
 -  ``RESET_TO_BL31``: Enable BL31 entrypoint as the CPU reset vector instead
    of the BL1 entrypoint. It can take the value 0 (CPU reset to BL1
    entrypoint) or 1 (CPU reset to BL31 entrypoint).

docs/porting-guide.rst

@@ -3298,10 +3298,10 @@ Function : plat_ea_handler
     Argument : uint64_t
     Return   : void
 
-This function is invoked by the RAS framework for the platform to handle an
-External Abort received at EL3. The intention of the function is to attempt to
-resolve the cause of External Abort and return; if that's not possible, to
-initiate orderly shutdown of the system.
+This function is invoked by the runtime exception handling framework for the
+platform to handle an External Abort received at EL3. The intention of the
+function is to attempt to resolve the cause of External Abort and return;
+if that's not possible then an orderly shutdown of the system is initiated.
 
 The first parameter (``int ea_reason``) indicates the reason for External Abort.
 Its value is one of ``ERROR_EA_*`` constants defined in ``ea_handle.h``.
@@ -3316,13 +3316,8 @@ The third parameter (``void *cookie``) is unused for now. The fourth parameter
 (``uint64_t flags``) indicates the preempted security state. These parameters
 are received from the top-level exception handler.
 
-If ``RAS_FFH_SUPPORT`` is set to ``1``, the default implementation of this
-function iterates through RAS handlers registered by the platform. If any of the
-RAS handlers resolve the External Abort, no further action is taken.
-
-If ``RAS_FFH_SUPPORT`` is set to ``0``, or if none of the platform RAS handlers
-could resolve the External Abort, the default implementation prints an error
-message, and panics.
+This function must be implemented if a platform expects Firmware First handling
+of External Aborts.
 
 Function : plat_handle_uncontainable_ea
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

include/lib/el3_runtime/aarch64/context.h

@@ -71,7 +71,7 @@
  * KFH mode : Used as counter value
  */
 #define CTX_NESTED_EA_FLAG	U(0x48)
-#if HANDLE_EA_EL3_FIRST_NS
+#if FFH_SUPPORT
  #define CTX_SAVED_ESR_EL3	U(0x50)
  #define CTX_SAVED_SPSR_EL3	U(0x58)
  #define CTX_SAVED_GPREG_LR	U(0x60)

include/plat/arm/common/arm_def.h

@@ -774,7 +774,7 @@ MEASURED_BOOT
 #define PLAT_PERCPU_BAKERY_LOCK_SIZE		(1 * CACHE_WRITEBACK_GRANULE)
 
 /* Priority levels for ARM platforms */
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 #define PLAT_RAS_PRI			0x10
 #endif
 #define PLAT_SDEI_CRITICAL_PRI		0x60

make_helpers/defaults.mk

@@ -191,9 +191,6 @@ PSCI_EXTENDED_STATE_ID		:= 0
 # Enable PSCI OS-initiated mode support
 PSCI_OS_INIT_MODE		:= 0
 
-# Enable RAS Firmware First Handling Support
-RAS_FFH_SUPPORT			:= 0
-
 # By default, BL1 acts as the reset handler, not BL31
 RESET_TO_BL31			:= 0
 

plat/arm/board/fvp/platform.mk

@@ -397,8 +397,12 @@ BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a75_pubsub.c	\
 endif
 endif
 
-ifeq (${RAS_FFH_SUPPORT},1)
+ifeq (${HANDLE_EA_EL3_FIRST_NS},1)
+ifeq (${ENABLE_FEAT_RAS},1)
 BL31_SOURCES		+=	plat/arm/board/fvp/aarch64/fvp_ras.c
+else
+BL31_SOURCES		+= 	plat/arm/board/fvp/aarch64/fvp_ea.c
+endif
 endif
 
 ifneq (${ENABLE_STACK_PROTECTOR},0)
@@ -518,16 +522,19 @@ endif
 # Test specific macros, keep them at bottom of this file
 $(eval $(call add_define,PLATFORM_TEST_EA_FFH))
 ifeq (${PLATFORM_TEST_EA_FFH}, 1)
-    ifeq (${HANDLE_EA_EL3_FIRST_NS}, 0)
-         $(error "PLATFORM_TEST_EA_FFH expects HANDLE_EA_EL3_FIRST_NS to be 1")
+    ifeq (${FFH_SUPPORT}, 0)
+         $(error "PLATFORM_TEST_EA_FFH expects FFH_SUPPORT to be 1")
     endif
-BL31_SOURCES	+= plat/arm/board/fvp/aarch64/fvp_ea.c
+
 endif
 
 $(eval $(call add_define,PLATFORM_TEST_RAS_FFH))
 ifeq (${PLATFORM_TEST_RAS_FFH}, 1)
-    ifeq (${RAS_EXTENSION}, 0)
-         $(error "PLATFORM_TEST_RAS_FFH expects RAS_EXTENSION to be 1")
+    ifeq (${ENABLE_FEAT_RAS}, 0)
+         $(error "PLATFORM_TEST_RAS_FFH expects ENABLE_FEAT_RAS to be 1")
+    endif
+    ifeq (${HANDLE_EA_EL3_FIRST_NS}, 0)
+         $(error "PLATFORM_TEST_RAS_FFH expects HANDLE_EA_EL3_FIRST_NS to be 1")
     endif
 endif
 

plat/arm/board/rdn2/platform.mk

@@ -69,7 +69,7 @@ BL31_SOURCES	+=	drivers/arm/gic/v3/gic600_multichip.c
 BL31_CFLAGS		+=	-DPLAT_XLAT_TABLES_DYNAMIC
 endif
 
-ifeq (${RAS_FFH_SUPPORT},1)
+ifeq (${ENABLE_FEAT_RAS}-${HANDLE_EA_EL3_FIRST_NS},1-1)
 BL31_SOURCES		+=	${RDN2_BASE}/rdn2_ras.c			\
 				${CSS_ENT_BASE}/ras/sgi_ras_common.c	\
 				${CSS_ENT_BASE}/ras/sgi_ras_sram.c	\

plat/arm/board/rdn2/rdn2_plat.c

@@ -137,7 +137,7 @@ void bl31_platform_setup(void)
 
 	sgi_bl31_common_platform_setup();
 
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 	sgi_ras_platform_setup(&ras_config);
 #endif
 }

plat/arm/board/rdn2/rdn2_security.c

@@ -15,7 +15,7 @@
 
 static const arm_tzc_regions_info_t tzc_regions[] = {
 	ARM_TZC_REGIONS_DEF,
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 	RDN2_TZC_CPER_REGION,
 #endif
 	{}

plat/arm/board/tc/platform.mk

@@ -21,8 +21,6 @@ CSS_USE_SCMI_SDS_DRIVER	:=	1
 
 ENABLE_FEAT_RAS		:=	1
 
-RAS_FFH_SUPPORT		:=	0
-
 SDEI_SUPPORT		:=	0
 
 EL3_EXCEPTION_HANDLING	:=	0

plat/arm/common/arm_bl31_setup.c

@@ -295,7 +295,7 @@ void arm_bl31_platform_setup(void)
 	/* Initialize power controller before setting up topology */
 	plat_arm_pwrc_setup();
 
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 	ras_init();
 #endif
 

plat/arm/common/arm_common.mk

@@ -352,7 +352,7 @@ endif
 endif
 
 # RAS sources
-ifeq (${RAS_FFH_SUPPORT},1)
+ifeq (${ENABLE_FEAT_RAS}-${HANDLE_EA_EL3_FIRST_NS},1-1)
 BL31_SOURCES		+=	lib/extensions/ras/std_err_record.c		\
 				lib/extensions/ras/ras_common.c
 endif

plat/arm/common/arm_gicv3.c

@@ -41,7 +41,7 @@ static const uintptr_t *gicr_frames = gicr_base_addrs;
 static const interrupt_prop_t arm_interrupt_props[] = {
 	PLAT_ARM_G1S_IRQ_PROPS(INTR_GROUP1S),
 	PLAT_ARM_G0_IRQ_PROPS(INTR_GROUP0),
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 	INTR_PROP_DESC(PLAT_CORE_FAULT_IRQ, PLAT_RAS_PRI, INTR_GROUP0,
 			GIC_INTR_CFG_LEVEL)
 #endif

plat/arm/css/sgi/include/sgi_base_platform_def.h

@@ -204,13 +204,13 @@
 					SOC_CSS_DEVICE_SIZE,	\
 					MT_DEVICE | MT_RW | MT_SECURE | MT_USER)
 
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 #define PLAT_SP_PRI				PLAT_RAS_PRI
 #else
 #define PLAT_SP_PRI				0x10
 #endif
 
-#if (SPM_MM || (SPMC_AT_EL3 && SPMC_AT_EL3_SEL0_SP)) && RAS_FFH_SUPPORT
+#if (SPM_MM || (SPMC_AT_EL3 && SPMC_AT_EL3_SEL0_SP)) && ENABLE_FEAT_RAS && FFH_SUPPORT
 /*
  * CPER buffer memory of 128KB is reserved and it is placed adjacent to the
  * memory shared between EL3 and S-EL0.
@@ -239,7 +239,7 @@
  */
 #define PLAT_ARM_SP_IMAGE_STACK_BASE	(PLAT_SP_IMAGE_NS_BUF_BASE +	\
 					 PLAT_SP_IMAGE_NS_BUF_SIZE)
-#endif /* SPM_MM && RAS_FFH_SUPPORT */
+#endif /* SPM_MM && ENABLE_FEAT_RAS && FFH_SUPPORT */
 
 /* Platform ID address */
 #define SSC_VERSION                     (SSC_REG_BASE + SSC_VERSION_OFFSET)

plat/arm/css/sgi/sgi-common.mk

@@ -10,8 +10,6 @@ CSS_ENT_BASE			:=	plat/arm/css/sgi
 
 ENABLE_FEAT_RAS			:=	1
 
-RAS_FFH_SUPPORT			:=	0
-
 SDEI_SUPPORT			:=	0
 
 EL3_EXCEPTION_HANDLING		:=	0

plat/arm/css/sgi/sgi_plat.c

@@ -93,7 +93,7 @@ const mmap_region_t plat_arm_secure_partition_mmap[] = {
 	PLAT_ARM_SECURE_MAP_DEVICE,
 	ARM_SP_IMAGE_MMAP,
 	ARM_SP_IMAGE_NS_BUF_MMAP,
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 	CSS_SGI_SP_CPER_BUF_MMAP,
 #endif
 	ARM_SP_IMAGE_RW_MMAP,

plat/arm/css/sgi/sgi_plat_v2.c

@@ -87,7 +87,7 @@ const mmap_region_t plat_arm_secure_partition_mmap[] = {
 	SOC_PLATFORM_PERIPH_MAP_DEVICE_USER,
 	ARM_SP_IMAGE_MMAP,
 	ARM_SP_IMAGE_NS_BUF_MMAP,
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 	CSS_SGI_SP_CPER_BUF_MMAP,
 #endif
 	ARM_SP_IMAGE_RW_MMAP,

plat/common/aarch64/plat_common.c

@@ -11,7 +11,7 @@
 #include <arch_helpers.h>
 #include <common/debug.h>
 #include <drivers/console.h>
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS
 #include <lib/extensions/ras.h>
 #endif
 #include <lib/xlat_tables/xlat_mmu_helpers.h>
@@ -29,7 +29,9 @@
 #pragma weak plat_sdei_validate_entry_point
 #endif
 
+#if FFH_SUPPORT
 #pragma weak plat_ea_handler = plat_default_ea_handler
+#endif
 
 void bl31_plat_runtime_setup(void)
 {
@@ -77,11 +79,12 @@ const char *get_el_str(unsigned int el)
 	return "EL1";
 }
 
+#if FFH_SUPPORT
 /* Handler for External Aborts from lower EL including RAS errors */
 void plat_default_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie,
 		void *handle, uint64_t flags)
 {
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS
 	/* Call RAS EA handler */
 	int handled = ras_ea_handler(ea_reason, syndrome, cookie, handle, flags);
 	if (handled != 0)
@@ -99,3 +102,4 @@ void plat_default_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *co
 	 */
 	lower_el_panic();
 }
+#endif

plat/common/aarch64/plat_ehf.c

@@ -12,7 +12,7 @@
  * Enumeration of priority levels on ARM platforms.
  */
 ehf_pri_desc_t plat_exceptions[] = {
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 	/* RAS Priority */
 	EHF_PRI_DESC(PLAT_PRI_BITS, PLAT_RAS_PRI),
 #endif
@@ -26,7 +26,7 @@ ehf_pri_desc_t plat_exceptions[] = {
 #endif
 
 #if SPM_MM || (SPMC_AT_EL3 && SPMC_AT_EL3_SEL0_SP)
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 #if (PLAT_SP_PRI != PLAT_RAS_PRI)
 	EHF_PRI_DESC(PLAT_PRI_BITS, PLAT_SP_PRI),
 #endif

plat/nvidia/tegra/include/tegra_private.h

@@ -154,7 +154,7 @@ int plat_sip_handler(uint32_t smc_fid,
 		     void *handle,
 		     uint64_t flags);
 
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS && FFH_SUPPORT
 void tegra194_ras_enable(void);
 void tegra194_ras_corrected_err_clear(uint64_t *cookie);
 #endif

plat/nvidia/tegra/soc/t194/plat_ras.c

@@ -484,7 +484,7 @@ REGISTER_RAS_INTERRUPTS(carmel_ras_interrupts);
 void plat_ea_handler(unsigned int ea_reason, uint64_t syndrome, void *cookie,
 		void *handle, uint64_t flags)
 {
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS
 	tegra194_ea_handler(ea_reason, syndrome, cookie, handle, flags);
 #else
 	plat_default_ea_handler(ea_reason, syndrome, cookie, handle, flags);

plat/nvidia/tegra/soc/t194/plat_setup.c

@@ -254,7 +254,7 @@ void plat_early_platform_setup(void)
 	/* sanity check MCE firmware compatibility */
 	mce_verify_firmware_version();
 
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS
 	/* Enable Uncorrectable RAS error */
 	tegra194_ras_enable();
 #endif

plat/nvidia/tegra/soc/t194/plat_sip_calls.c

@@ -71,7 +71,7 @@ int32_t plat_sip_handler(uint32_t smc_fid,
 
 		break;
 
-#if RAS_FFH_SUPPORT
+#if ENABLE_FEAT_RAS
 	case TEGRA_SIP_CLEAR_RAS_CORRECTED_ERRORS:
 	{
 		/*

plat/nvidia/tegra/soc/t194/platform_t194.mk

@@ -37,7 +37,7 @@ $(eval $(call add_define,MAX_MMAP_REGIONS))
 
 # enable RAS handling
 HANDLE_EA_EL3_FIRST_NS			:= 1
-RAS_FFH_SUPPORT				:= 1
+ENABLE_FEAT_RAS				:= 1
 
 # platform files
 PLAT_INCLUDES		+=	-Iplat/nvidia/tegra/include/t194 \
@@ -71,7 +71,7 @@ BL31_SOURCES		+=	${TEGRA_DRIVERS}/spe/shared_console.S
 endif
 
 # RAS sources
-ifeq (${RAS_FFH_SUPPORT},1)
+ifeq (${ENABLE_FEAT_RAS}-${HANDLE_EA_EL3_FIRST_NS},1-1)
 BL31_SOURCES		+=	lib/extensions/ras/std_err_record.c		\
 				lib/extensions/ras/ras_common.c			\
 				${SOC_DIR}/plat_ras.c