Browse Source
Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. This patch adds Virtual QEMU platform support for this SoC "versal_virt". Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>pull/1605/head
Siva Durga Prasad Paladugu
6 years ago
14 changed files with 1093 additions and 0 deletions
@ -0,0 +1,33 @@ |
|||
Trusted Firmware-A for Xilinx Versal |
|||
================================ |
|||
|
|||
Trusted Firmware-A implements the EL3 firmware layer for Xilinx Versal. |
|||
The platform only uses the runtime part of TF-A as Xilinx Versal already has a |
|||
BootROM (BL1) and PMC FW (BL2). |
|||
|
|||
BL31 is TF-A. |
|||
BL32 is an optional Secure Payload. |
|||
BL33 is the non-secure world software (U-Boot, Linux etc). |
|||
|
|||
To build: |
|||
```bash |
|||
make RESET_TO_BL31=1 CROSS_COMPILE=aarch64-none-elf- PLAT=versal bl31 |
|||
``` |
|||
|
|||
To build ATF for different platform (for now its just versal virtual "versal_virt") |
|||
```bash |
|||
make RESET_TO_BL31=1 CROSS_COMPILE=aarch64-none-elf- PLAT=versal VERSAL_PLATFORM=versal_virt bl31 |
|||
``` |
|||
|
|||
# Xilinx Versal platform specific build options |
|||
* `VERSAL_ATF_MEM_BASE`: Specifies the base address of the bl31 binary. |
|||
* `VERSAL_ATF_MEM_SIZE`: Specifies the size of the memory region of the bl31 binary. |
|||
* `VERSAL_BL32_MEM_BASE`: Specifies the base address of the bl32 binary. |
|||
* `VERSAL_BL32_MEM_SIZE`: Specifies the size of the memory region of the bl32 binary. |
|||
|
|||
* `VERSAL_CONSOLE`: Select the console driver. Options: |
|||
- `pl011`, `pl011_0`: ARM pl011 UART 0 |
|||
- `pl011_1` : ARM pl011 UART 1 |
|||
|
|||
* `VERSAL_PLATFORM`: Select the platform. Options: |
|||
- `versal_virt` : Versal Virtual platform |
|||
@ -0,0 +1,75 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#include <debug.h> |
|||
#include <generic_delay_timer.h> |
|||
#include <mmio.h> |
|||
#include <platform.h> |
|||
#include <xlat_tables.h> |
|||
#include "../versal_def.h" |
|||
#include "../versal_private.h" |
|||
|
|||
/*
|
|||
* Table of regions to map using the MMU. |
|||
* This doesn't include TZRAM as the 'mem_layout' argument passed to |
|||
* configure_mmu_elx() will give the available subset of that, |
|||
*/ |
|||
const mmap_region_t plat_versal_mmap[] = { |
|||
MAP_REGION_FLAT(DEVICE0_BASE, DEVICE0_SIZE, MT_DEVICE | MT_RW | MT_SECURE), |
|||
MAP_REGION_FLAT(DEVICE1_BASE, DEVICE1_SIZE, MT_DEVICE | MT_RW | MT_SECURE), |
|||
MAP_REGION_FLAT(CRF_BASE, CRF_SIZE, MT_DEVICE | MT_RW | MT_SECURE), |
|||
{ 0 } |
|||
}; |
|||
|
|||
const mmap_region_t *plat_versal_get_mmap(void) |
|||
{ |
|||
return plat_versal_mmap; |
|||
} |
|||
|
|||
static void versal_print_platform_name(void) |
|||
{ |
|||
NOTICE("ATF running on Xilinx %s\n", PLATFORM_NAME); |
|||
} |
|||
|
|||
void versal_config_setup(void) |
|||
{ |
|||
uint32_t val; |
|||
|
|||
versal_print_platform_name(); |
|||
|
|||
mmio_write_32(VERSAL_CRL_IOU_SWITCH_CTRL, |
|||
VERSAL_IOU_SWITCH_CTRL_CLKACT_BIT | |
|||
(0x20 << VERSAL_IOU_SWITCH_CTRL_DIVISOR0_SHIFT)); |
|||
|
|||
/* Global timer init - Program time stamp reference clk */ |
|||
val = mmio_read_32(VERSAL_CRL_TIMESTAMP_REF_CTRL); |
|||
val |= VERSAL_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT; |
|||
mmio_write_32(VERSAL_CRL_TIMESTAMP_REF_CTRL, val); |
|||
|
|||
/* Clear reset of timestamp reg */ |
|||
mmio_write_32(VERSAL_CRL_RST_TIMESTAMP_OFFSET, 0x0); |
|||
|
|||
/* Program freq register in System counter and enable system counter. */ |
|||
mmio_write_32(VERSAL_IOU_SCNTRS_BASE_FREQ, VERSAL_CPU_CLOCK); |
|||
mmio_write_32(VERSAL_IOU_SCNTRS_COUNTER_CONTROL_REG, |
|||
VERSAL_IOU_SCNTRS_CONTROL_EN); |
|||
|
|||
generic_delay_timer_init(); |
|||
} |
|||
|
|||
unsigned int plat_get_syscnt_freq2(void) |
|||
{ |
|||
return VERSAL_CPU_CLOCK; |
|||
} |
|||
|
|||
uintptr_t plat_get_ns_image_entrypoint(void) |
|||
{ |
|||
#ifdef PRELOADED_BL33_BASE |
|||
return PRELOADED_BL33_BASE; |
|||
#else |
|||
return PLAT_VERSAL_NS_IMAGE_OFFSET; |
|||
#endif |
|||
} |
|||
@ -0,0 +1,73 @@ |
|||
/* |
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#include <arch.h> |
|||
#include <asm_macros.S> |
|||
#include <gicv3.h> |
|||
#include <platform_def.h> |
|||
|
|||
.globl plat_secondary_cold_boot_setup |
|||
.globl plat_is_my_cpu_primary |
|||
.globl versal_calc_core_pos |
|||
.globl platform_mem_init |
|||
.globl plat_my_core_pos |
|||
|
|||
/* ----------------------------------------------------- |
|||
* void plat_secondary_cold_boot_setup (void); |
|||
* |
|||
* This function performs any platform specific actions |
|||
* needed for a secondary cpu after a cold reset e.g |
|||
* mark the cpu's presence, mechanism to place it in a |
|||
* holding pen etc. |
|||
* TODO: Should we read the PSYS register to make sure |
|||
* that the request has gone through. |
|||
* ----------------------------------------------------- |
|||
*/ |
|||
func plat_secondary_cold_boot_setup |
|||
mrs x0, mpidr_el1 |
|||
|
|||
/* |
|||
* There is no sane reason to come out of this wfi. This |
|||
* cpu will be powered on and reset by the cpu_on pm api |
|||
*/ |
|||
dsb sy |
|||
bl plat_panic_handler |
|||
endfunc plat_secondary_cold_boot_setup |
|||
|
|||
func plat_is_my_cpu_primary |
|||
mov x9, x30 |
|||
bl plat_my_core_pos |
|||
cmp x0, #VERSAL_PRIMARY_CPU |
|||
cset x0, eq |
|||
ret x9 |
|||
endfunc plat_is_my_cpu_primary |
|||
|
|||
/* ----------------------------------------------------- |
|||
* unsigned int plat_my_core_pos(void) |
|||
* This function uses the versal_calc_core_pos() |
|||
* definition to get the index of the calling CPU. |
|||
* ----------------------------------------------------- |
|||
*/ |
|||
func plat_my_core_pos |
|||
mrs x0, mpidr_el1 |
|||
b versal_calc_core_pos |
|||
endfunc plat_my_core_pos |
|||
|
|||
func versal_calc_core_pos |
|||
and x1, x0, #MPIDR_CPU_MASK |
|||
and x0, x0, #MPIDR_CLUSTER_MASK |
|||
add x0, x1, x0, LSR #6 |
|||
ret |
|||
endfunc versal_calc_core_pos |
|||
|
|||
/* --------------------------------------------------------------------- |
|||
* We don't need to carry out any memory initialization on VERSAL |
|||
* platform. The Secure RAM is accessible straight away. |
|||
* --------------------------------------------------------------------- |
|||
*/ |
|||
func platform_mem_init |
|||
ret |
|||
endfunc platform_mem_init |
|||
@ -0,0 +1,120 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#include <assert.h> |
|||
#include <bl_common.h> |
|||
#include <bl31.h> |
|||
#include <console.h> |
|||
#include <debug.h> |
|||
#include <errno.h> |
|||
#include <platform.h> |
|||
#include <pl011.h> |
|||
#include <xlat_tables.h> |
|||
#include "versal_private.h" |
|||
|
|||
static entry_point_info_t bl32_image_ep_info; |
|||
static entry_point_info_t bl33_image_ep_info; |
|||
static console_pl011_t versal_runtime_console; |
|||
|
|||
/*
|
|||
* Return a pointer to the 'entry_point_info' structure of the next image for |
|||
* the security state specified. BL33 corresponds to the non-secure image type |
|||
* while BL32 corresponds to the secure image type. A NULL pointer is returned |
|||
* if the image does not exist. |
|||
*/ |
|||
entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type) |
|||
{ |
|||
assert(sec_state_is_valid(type)); |
|||
|
|||
if (type == NON_SECURE) |
|||
return &bl33_image_ep_info; |
|||
|
|||
return &bl32_image_ep_info; |
|||
} |
|||
|
|||
/*
|
|||
* Perform any BL31 specific platform actions. Here is an opportunity to copy |
|||
* parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before they |
|||
* are lost (potentially). This needs to be done before the MMU is initialized |
|||
* so that the memory layout can be used while creating page tables. |
|||
*/ |
|||
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, |
|||
u_register_t arg2, u_register_t arg3) |
|||
{ |
|||
|
|||
/* Initialize the console to provide early debug support */ |
|||
int rc = console_pl011_register(VERSAL_UART_BASE, |
|||
VERSAL_UART_CLOCK, |
|||
VERSAL_UART_BAUDRATE, |
|||
&versal_runtime_console); |
|||
if (rc == 0) |
|||
panic(); |
|||
|
|||
console_set_scope(&versal_runtime_console.console, CONSOLE_FLAG_BOOT | |
|||
CONSOLE_FLAG_RUNTIME); |
|||
|
|||
/* Initialize the platform config for future decision making */ |
|||
versal_config_setup(); |
|||
/* There are no parameters from BL2 if BL31 is a reset vector */ |
|||
assert(arg0 == 0U); |
|||
assert(arg1 == 0U); |
|||
|
|||
/*
|
|||
* Do initial security configuration to allow DRAM/device access. On |
|||
* Base VERSAL only DRAM security is programmable (via TrustZone), but |
|||
* other platforms might have more programmable security devices |
|||
* present. |
|||
*/ |
|||
|
|||
/* Populate common information for BL32 and BL33 */ |
|||
SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0); |
|||
SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE); |
|||
SET_PARAM_HEAD(&bl33_image_ep_info, PARAM_EP, VERSION_1, 0); |
|||
SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); |
|||
|
|||
/* use build time defaults in JTAG boot mode */ |
|||
bl32_image_ep_info.pc = BL32_BASE; |
|||
bl32_image_ep_info.spsr = 0; |
|||
bl33_image_ep_info.pc = plat_get_ns_image_entrypoint(); |
|||
bl33_image_ep_info.spsr = SPSR_64(MODE_EL2, MODE_SP_ELX, |
|||
DISABLE_ALL_EXCEPTIONS); |
|||
|
|||
NOTICE("BL31: Secure code at 0x%lx\n", bl32_image_ep_info.pc); |
|||
NOTICE("BL31: Non secure code at 0x%lx\n", bl33_image_ep_info.pc); |
|||
} |
|||
|
|||
void bl31_platform_setup(void) |
|||
{ |
|||
/* Initialize the gic cpu and distributor interfaces */ |
|||
plat_versal_gic_driver_init(); |
|||
plat_versal_gic_init(); |
|||
} |
|||
|
|||
void bl31_plat_runtime_setup(void) |
|||
{ |
|||
} |
|||
|
|||
/*
|
|||
* Perform the very early platform specific architectural setup here. |
|||
*/ |
|||
void bl31_plat_arch_setup(void) |
|||
{ |
|||
const mmap_region_t bl_regions[] = { |
|||
MAP_REGION_FLAT(BL31_BASE, BL31_END - BL31_BASE, |
|||
MT_MEMORY | MT_RW | MT_SECURE), |
|||
MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, |
|||
MT_CODE | MT_SECURE), |
|||
MAP_REGION_FLAT(BL_RO_DATA_BASE, BL_RO_DATA_END - BL_RO_DATA_BASE, |
|||
MT_RO_DATA | MT_SECURE), |
|||
MAP_REGION_FLAT(BL_COHERENT_RAM_BASE, |
|||
BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE, |
|||
MT_DEVICE | MT_RW | MT_SECURE), |
|||
{0} |
|||
}; |
|||
|
|||
setup_page_tables(bl_regions, plat_versal_get_mmap()); |
|||
enable_mmu_el3(0); |
|||
} |
|||
@ -0,0 +1,109 @@ |
|||
/* |
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#ifndef PLAT_MACROS_S |
|||
#define PLAT_MACROS_S |
|||
|
|||
#include "../include/platform_def.h" |
|||
#include <gic_common.h> |
|||
#include <gicv2.h> |
|||
#include <gicv3.h> |
|||
|
|||
.section .rodata.gic_reg_name, "aS" |
|||
/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */ |
|||
gicc_regs: |
|||
.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", "" |
|||
|
|||
/* Applicable only to GICv3 with SRE enabled */ |
|||
icc_regs: |
|||
.asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", "" |
|||
|
|||
/* Registers common to both GICv2 and GICv3 */ |
|||
gicd_pend_reg: |
|||
.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n Offset:\t\t\tvalue\n" |
|||
newline: |
|||
.asciz "\n" |
|||
spacer: |
|||
.asciz ":\t\t0x" |
|||
|
|||
/* --------------------------------------------- |
|||
* The below utility macro prints out relevant GIC |
|||
* registers whenever an unhandled exception is |
|||
* taken in BL31 on Versal platform. |
|||
* Expects: GICD base in x16, GICC base in x17 |
|||
* Clobbers: x0 - x10, sp |
|||
* --------------------------------------------- |
|||
*/ |
|||
.macro versal_print_gic_regs |
|||
/* Check for GICv3 system register access */ |
|||
mrs x7, id_aa64pfr0_el1 |
|||
ubfx x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH |
|||
cmp x7, #1 |
|||
b.ne print_gicv2 |
|||
|
|||
/* Check for SRE enable */ |
|||
mrs x8, ICC_SRE_EL3 |
|||
tst x8, #ICC_SRE_SRE_BIT |
|||
b.eq print_gicv2 |
|||
|
|||
/* Load the icc reg list to x6 */ |
|||
adr x6, icc_regs |
|||
/* Load the icc regs to gp regs used by str_in_crash_buf_print */ |
|||
mrs x8, ICC_HPPIR0_EL1 |
|||
mrs x9, ICC_HPPIR1_EL1 |
|||
mrs x10, ICC_CTLR_EL3 |
|||
/* Store to the crash buf and print to console */ |
|||
bl str_in_crash_buf_print |
|||
b print_gic_common |
|||
|
|||
print_gicv2: |
|||
/* Load the gicc reg list to x6 */ |
|||
adr x6, gicc_regs |
|||
/* Load the gicc regs to gp regs used by str_in_crash_buf_print */ |
|||
ldr w8, [x17, #GICC_HPPIR] |
|||
ldr w9, [x17, #GICC_AHPPIR] |
|||
ldr w10, [x17, #GICC_CTLR] |
|||
/* Store to the crash buf and print to console */ |
|||
bl str_in_crash_buf_print |
|||
|
|||
print_gic_common: |
|||
/* Print the GICD_ISPENDR regs */ |
|||
add x7, x16, #GICD_ISPENDR |
|||
adr x4, gicd_pend_reg |
|||
bl asm_print_str |
|||
gicd_ispendr_loop: |
|||
sub x4, x7, x16 |
|||
cmp x4, #0x280 |
|||
b.eq exit_print_gic_regs |
|||
bl asm_print_hex |
|||
|
|||
adr x4, spacer |
|||
bl asm_print_str |
|||
|
|||
ldr x4, [x7], #8 |
|||
bl asm_print_hex |
|||
|
|||
adr x4, newline |
|||
bl asm_print_str |
|||
b gicd_ispendr_loop |
|||
exit_print_gic_regs: |
|||
.endm |
|||
|
|||
/* --------------------------------------------- |
|||
* The below required platform porting macro |
|||
* prints out relevant GIC and CCI registers |
|||
* whenever an unhandled exception is taken in |
|||
* BL31. |
|||
* Clobbers: x0 - x10, x16, x17, sp |
|||
* --------------------------------------------- |
|||
*/ |
|||
.macro plat_crash_print_regs |
|||
mov_imm x17, PLAT_VERSAL_GICD_BASE |
|||
mov_imm x16, PLAT_VERSAL_GICR_BASE |
|||
versal_print_gic_regs |
|||
.endm |
|||
|
|||
#endif /* PLAT_MACROS_S */ |
|||
@ -0,0 +1,101 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#ifndef PLATFORM_DEF_H |
|||
#define PLATFORM_DEF_H |
|||
|
|||
#include <arch.h> |
|||
#include "../versal_def.h" |
|||
|
|||
/*******************************************************************************
|
|||
* Generic platform constants |
|||
******************************************************************************/ |
|||
|
|||
/* Size of cacheable stacks */ |
|||
#define PLATFORM_STACK_SIZE 0x440 |
|||
|
|||
#define PLATFORM_CORE_COUNT 2 |
|||
#define PLAT_MAX_PWR_LVL 1 |
|||
#define PLAT_MAX_RET_STATE 1 |
|||
#define PLAT_MAX_OFF_STATE 2 |
|||
|
|||
/*******************************************************************************
|
|||
* BL31 specific defines. |
|||
******************************************************************************/ |
|||
/*
|
|||
* Put BL31 at the top of the Trusted SRAM (just below the shared memory, if |
|||
* present). BL31_BASE is calculated using the current BL31 debug size plus a |
|||
* little space for growth. |
|||
*/ |
|||
#ifndef VERSAL_ATF_MEM_BASE |
|||
# define BL31_BASE 0xfffea000 |
|||
# define BL31_LIMIT 0xffffffff |
|||
#else |
|||
# define BL31_BASE (VERSAL_ATF_MEM_BASE) |
|||
# define BL31_LIMIT (VERSAL_ATF_MEM_BASE + VERSAL_ATF_MEM_SIZE - 1) |
|||
# ifdef VERSAL_ATF_MEM_PROGBITS_SIZE |
|||
# define BL31_PROGBITS_LIMIT (VERSAL_ATF_MEM_BASE + VERSAL_ATF_MEM_PROGBITS_SIZE - 1) |
|||
# endif |
|||
#endif |
|||
|
|||
/*******************************************************************************
|
|||
* BL32 specific defines. |
|||
******************************************************************************/ |
|||
#ifndef VERSAL_BL32_MEM_BASE |
|||
# define BL32_BASE 0x60000000 |
|||
# define BL32_LIMIT 0x7fffffff |
|||
#else |
|||
# define BL32_BASE (VERSAL_BL32_MEM_BASE) |
|||
# define BL32_LIMIT (VERSAL_BL32_MEM_BASE + VERSAL_BL32_MEM_SIZE - 1) |
|||
#endif |
|||
|
|||
/*******************************************************************************
|
|||
* BL33 specific defines. |
|||
******************************************************************************/ |
|||
#ifndef PRELOADED_BL33_BASE |
|||
# define PLAT_VERSAL_NS_IMAGE_OFFSET 0x8000000 |
|||
#else |
|||
# define PLAT_VERSAL_NS_IMAGE_OFFSET PRELOADED_BL33_BASE |
|||
#endif |
|||
|
|||
/*******************************************************************************
|
|||
* TSP specific defines. |
|||
******************************************************************************/ |
|||
#define TSP_SEC_MEM_BASE BL32_BASE |
|||
#define TSP_SEC_MEM_SIZE (BL32_LIMIT - BL32_BASE + 1) |
|||
|
|||
/* ID of the secure physical generic timer interrupt used by the TSP */ |
|||
#define TSP_IRQ_SEC_PHY_TIMER ARM_IRQ_SEC_PHY_TIMER |
|||
|
|||
/*******************************************************************************
|
|||
* Platform specific page table and MMU setup constants |
|||
******************************************************************************/ |
|||
#define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 32) |
|||
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 32) |
|||
#define MAX_MMAP_REGIONS 7 |
|||
#define MAX_XLAT_TABLES 5 |
|||
|
|||
#define CACHE_WRITEBACK_SHIFT 6 |
|||
#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT) |
|||
|
|||
#define PLAT_VERSAL_GICD_BASE 0xF9000000 |
|||
#define PLAT_VERSAL_GICR_BASE 0xF9080000 |
|||
|
|||
/*
|
|||
* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 |
|||
* terminology. On a GICv2 system or mode, the lists will be merged and treated |
|||
* as Group 0 interrupts. |
|||
*/ |
|||
#define PLAT_VERSAL_G1S_IRQS VERSAL_IRQ_SEC_PHY_TIMER |
|||
#define PLAT_VERSAL_G0_IRQS VERSAL_IRQ_SEC_PHY_TIMER |
|||
|
|||
#define PLAT_VERSAL_G1S_IRQ_PROPS(grp) \ |
|||
INTR_PROP_DESC(VERSAL_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
|||
GIC_INTR_CFG_LEVEL) |
|||
|
|||
#define PLAT_VERSAL_G0_IRQ_PROPS(grp) |
|||
|
|||
#endif /* PLATFORM_DEF_H */ |
|||
@ -0,0 +1,87 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#include <debug.h> |
|||
#include <mmio.h> |
|||
#include <platform.h> |
|||
#include <psci.h> |
|||
#include "versal_private.h" |
|||
|
|||
static uintptr_t versal_sec_entry; |
|||
|
|||
static int versal_nopmc_pwr_domain_on(u_register_t mpidr) |
|||
{ |
|||
uint32_t r; |
|||
unsigned int cpu_id = plat_core_pos_by_mpidr(mpidr); |
|||
|
|||
VERBOSE("%s: mpidr: 0x%lx\n", __func__, mpidr); |
|||
|
|||
if (cpu_id == -1) |
|||
return PSCI_E_INTERN_FAIL; |
|||
|
|||
/*
|
|||
* program RVBAR |
|||
*/ |
|||
mmio_write_32(FPD_APU_RVBAR_L_0 + (cpu_id << 3), versal_sec_entry); |
|||
mmio_write_32(FPD_APU_RVBAR_H_0 + (cpu_id << 3), versal_sec_entry >> 32); |
|||
|
|||
/*
|
|||
* clear VINITHI |
|||
*/ |
|||
r = mmio_read_32(FPD_APU_CONFIG_0); |
|||
r &= ~(1 << FPD_APU_CONFIG_0_VINITHI_SHIFT << cpu_id); |
|||
mmio_write_32(FPD_APU_CONFIG_0, r); |
|||
|
|||
/*
|
|||
* FIXME: Add power up sequence, By default it works |
|||
* now without the need of it as it was powered up by |
|||
* default. |
|||
*/ |
|||
|
|||
/*
|
|||
* clear power down request |
|||
*/ |
|||
r = mmio_read_32(FPD_APU_PWRCTL); |
|||
r &= ~(1 << cpu_id); |
|||
mmio_write_32(FPD_APU_PWRCTL, r); |
|||
|
|||
/*
|
|||
* release core reset |
|||
*/ |
|||
r = mmio_read_32(CRF_RST_APU); |
|||
r &= ~((CRF_RST_APU_ACPU_PWRON_RESET | |
|||
CRF_RST_APU_ACPU_RESET) << cpu_id); |
|||
mmio_write_32(CRF_RST_APU, r); |
|||
|
|||
return PSCI_E_SUCCESS; |
|||
} |
|||
|
|||
void versal_pwr_domain_on_finish(const psci_power_state_t *target_state) |
|||
{ |
|||
/* Enable the gic cpu interface */ |
|||
plat_versal_gic_pcpu_init(); |
|||
|
|||
/* Program the gic per-cpu distributor or re-distributor interface */ |
|||
plat_versal_gic_cpuif_enable(); |
|||
} |
|||
|
|||
static const struct plat_psci_ops versal_nopmc_psci_ops = { |
|||
.pwr_domain_on = versal_nopmc_pwr_domain_on, |
|||
.pwr_domain_on_finish = versal_pwr_domain_on_finish, |
|||
}; |
|||
|
|||
/*******************************************************************************
|
|||
* Export the platform specific power ops. |
|||
******************************************************************************/ |
|||
int plat_setup_psci_ops(uintptr_t sec_entrypoint, |
|||
const struct plat_psci_ops **psci_ops) |
|||
{ |
|||
versal_sec_entry = sec_entrypoint; |
|||
|
|||
*psci_ops = &versal_nopmc_psci_ops; |
|||
|
|||
return 0; |
|||
} |
|||
@ -0,0 +1,14 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#include <platform_def.h> |
|||
|
|||
static const unsigned char plat_power_domain_tree_desc[] = {1, PLATFORM_CORE_COUNT}; |
|||
|
|||
const unsigned char *plat_get_power_domain_tree_desc(void) |
|||
{ |
|||
return plat_power_domain_tree_desc; |
|||
} |
|||
@ -0,0 +1,18 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
#include <platform.h> |
|||
#include "versal_private.h" |
|||
|
|||
int plat_core_pos_by_mpidr(u_register_t mpidr) |
|||
{ |
|||
if (mpidr & MPIDR_CLUSTER_MASK) |
|||
return -1; |
|||
|
|||
if ((mpidr & MPIDR_CPU_MASK) >= PLATFORM_CORE_COUNT) |
|||
return -1; |
|||
|
|||
return versal_calc_core_pos(mpidr); |
|||
} |
|||
@ -0,0 +1,63 @@ |
|||
# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
|
|||
#
|
|||
# SPDX-License-Identifier: BSD-3-Clause
|
|||
|
|||
override PROGRAMMABLE_RESET_ADDRESS := 1 |
|||
PSCI_EXTENDED_STATE_ID := 1 |
|||
A53_DISABLE_NON_TEMPORAL_HINT := 0 |
|||
SEPARATE_CODE_AND_RODATA := 1 |
|||
override RESET_TO_BL31 := 1 |
|||
PL011_GENERIC_UART := 1 |
|||
MULTI_CONSOLE_API := 1 |
|||
|
|||
ifdef VERSAL_ATF_MEM_BASE |
|||
$(eval $(call add_define,VERSAL_ATF_MEM_BASE)) |
|||
|
|||
ifndef VERSAL_ATF_MEM_SIZE |
|||
$(error "VERSAL_ATF_BASE defined without VERSAL_ATF_SIZE") |
|||
endif |
|||
$(eval $(call add_define,VERSAL_ATF_MEM_SIZE)) |
|||
|
|||
ifdef VERSAL_ATF_MEM_PROGBITS_SIZE |
|||
$(eval $(call add_define,VERSAL_ATF_MEM_PROGBITS_SIZE)) |
|||
endif |
|||
endif |
|||
|
|||
ifdef VERSAL_BL32_MEM_BASE |
|||
$(eval $(call add_define,VERSAL_BL32_MEM_BASE)) |
|||
|
|||
ifndef VERSAL_BL32_MEM_SIZE |
|||
$(error "VERSAL_BL32_BASE defined without VERSAL_BL32_SIZE") |
|||
endif |
|||
$(eval $(call add_define,VERSAL_BL32_MEM_SIZE)) |
|||
endif |
|||
|
|||
VERSAL_PLATFORM ?= versal_virt |
|||
$(eval $(call add_define_val,VERSAL_PLATFORM,VERSAL_PLATFORM_ID_${VERSAL_PLATFORM})) |
|||
|
|||
VERSAL_CONSOLE ?= pl011 |
|||
$(eval $(call add_define_val,VERSAL_CONSOLE,VERSAL_CONSOLE_ID_${VERSAL_CONSOLE})) |
|||
|
|||
PLAT_INCLUDES := -Iplat/xilinx/versal/include/ |
|||
|
|||
PLAT_BL_COMMON_SOURCES := lib/xlat_tables/xlat_tables_common.c \
|
|||
lib/xlat_tables/aarch64/xlat_tables.c \
|
|||
drivers/delay_timer/delay_timer.c \
|
|||
drivers/delay_timer/generic_delay_timer.c \
|
|||
drivers/arm/gic/common/gic_common.c \
|
|||
drivers/arm/gic/v3/gicv3_main.c \
|
|||
drivers/arm/gic/v3/gicv3_helpers.c \
|
|||
drivers/arm/pl011/aarch64/pl011_console.S \
|
|||
plat/common/plat_gicv3.c \
|
|||
plat/xilinx/versal/aarch64/versal_helpers.S \
|
|||
plat/xilinx/versal/aarch64/versal_common.c |
|||
|
|||
BL31_SOURCES += lib/cpus/aarch64/cortex_a53.S \
|
|||
lib/cpus/aarch64/cortex_a72.S \
|
|||
plat/common/plat_psci_common.c \
|
|||
plat/xilinx/versal/bl31_versal_setup.c \
|
|||
plat/xilinx/versal/plat_psci.c \
|
|||
plat/xilinx/versal/plat_versal.c \
|
|||
plat/xilinx/versal/plat_topology.c \
|
|||
plat/xilinx/versal/sip_svc_setup.c \
|
|||
plat/xilinx/versal/versal_gicv3.c |
|||
@ -0,0 +1,82 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
/* Top level SMC handler for SiP calls. Dispatch PM calls to PM SMC handler. */ |
|||
|
|||
#include <debug.h> |
|||
#include <runtime_svc.h> |
|||
#include <uuid.h> |
|||
|
|||
/* SMC function IDs for SiP Service queries */ |
|||
#define VERSAL_SIP_SVC_CALL_COUNT 0x8200ff00 |
|||
#define VERSAL_SIP_SVC_UID 0x8200ff01 |
|||
#define VERSAL_SIP_SVC_VERSION 0x8200ff03 |
|||
|
|||
/* SiP Service Calls version numbers */ |
|||
#define SIP_SVC_VERSION_MAJOR 0 |
|||
#define SIP_SVC_VERSION_MINOR 1 |
|||
|
|||
/* These macros are used to identify PM calls from the SMC function ID */ |
|||
#define PM_FID_MASK 0xf000u |
|||
#define PM_FID_VALUE 0u |
|||
#define is_pm_fid(_fid) (((_fid) & PM_FID_MASK) == PM_FID_VALUE) |
|||
|
|||
/* SiP Service UUID */ |
|||
DEFINE_SVC_UUID2(versal_sip_uuid, |
|||
0x2ab9e4ec, 0x93b9, 0x11e7, 0xa0, 0x19, |
|||
0xdf, 0xe0, 0xdb, 0xad, 0x0a, 0xe0); |
|||
|
|||
/**
|
|||
* sip_svc_setup() - Setup SiP Service |
|||
* |
|||
* Invokes PM setup |
|||
*/ |
|||
static int32_t sip_svc_setup(void) |
|||
{ |
|||
return 0; |
|||
} |
|||
|
|||
/**
|
|||
* sip_svc_smc_handler() - Top-level SiP Service SMC handler |
|||
* |
|||
* Handler for all SiP SMC calls. Handles standard SIP requests |
|||
* and calls PM SMC handler if the call is for a PM-API function. |
|||
*/ |
|||
uintptr_t sip_svc_smc_handler(uint32_t smc_fid, |
|||
u_register_t x1, |
|||
u_register_t x2, |
|||
u_register_t x3, |
|||
u_register_t x4, |
|||
void *cookie, |
|||
void *handle, |
|||
u_register_t flags) |
|||
{ |
|||
/* Let PM SMC handler deal with PM-related requests */ |
|||
switch (smc_fid) { |
|||
case VERSAL_SIP_SVC_CALL_COUNT: |
|||
/* PM functions + default functions */ |
|||
SMC_RET1(handle, 2); |
|||
|
|||
case VERSAL_SIP_SVC_UID: |
|||
SMC_UUID_RET(handle, versal_sip_uuid); |
|||
|
|||
case VERSAL_SIP_SVC_VERSION: |
|||
SMC_RET2(handle, SIP_SVC_VERSION_MAJOR, SIP_SVC_VERSION_MINOR); |
|||
|
|||
default: |
|||
WARN("Unimplemented SiP Service Call: 0x%x\n", smc_fid); |
|||
SMC_RET1(handle, SMC_UNK); |
|||
} |
|||
} |
|||
|
|||
/* Register PM Service Calls as runtime service */ |
|||
DECLARE_RT_SVC( |
|||
sip_svc, |
|||
OEN_SIP_START, |
|||
OEN_SIP_END, |
|||
SMC_TYPE_FAST, |
|||
sip_svc_setup, |
|||
sip_svc_smc_handler); |
|||
@ -0,0 +1,109 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#ifndef VERSAL_DEF_H |
|||
#define VERSAL_DEF_H |
|||
|
|||
#include <common_def.h> |
|||
|
|||
/* List all consoles */ |
|||
#define VERSAL_CONSOLE_ID_pl011 1 |
|||
#define VERSAL_CONSOLE_ID_pl011_0 1 |
|||
#define VERSAL_CONSOLE_ID_pl011_1 2 |
|||
#define VERSAL_CONSOLE_ID_dcc 3 |
|||
|
|||
#define VERSAL_CONSOLE_IS(con) (VERSAL_CONSOLE_ID_ ## con == VERSAL_CONSOLE) |
|||
|
|||
/* List all supported platforms */ |
|||
#define VERSAL_PLATFORM_ID_versal_virt 1 |
|||
|
|||
#define VERSAL_PLATFORM_IS(con) (VERSAL_PLATFORM_ID_ ## con == VERSAL_PLATFORM) |
|||
|
|||
/* Firmware Image Package */ |
|||
#define VERSAL_PRIMARY_CPU 0 |
|||
|
|||
/*******************************************************************************
|
|||
* memory map related constants |
|||
******************************************************************************/ |
|||
#define DEVICE0_BASE 0xFF000000 |
|||
#define DEVICE0_SIZE 0x00E00000 |
|||
#define DEVICE1_BASE 0xF9000000 |
|||
#define DEVICE1_SIZE 0x00800000 |
|||
|
|||
/* CRL */ |
|||
#define VERSAL_CRL 0xFF5E0000 |
|||
#define VERSAL_CRL_IOU_SWITCH_CTRL (VERSAL_CRL + 0x114) |
|||
#define VERSAL_CRL_TIMESTAMP_REF_CTRL (VERSAL_CRL + 0x14C) |
|||
#define VERSAL_CRL_RST_TIMESTAMP_OFFSET (VERSAL_CRL + 0x348) |
|||
|
|||
#define VERSAL_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT (1 << 25) |
|||
#define VERSAL_IOU_SWITCH_CTRL_CLKACT_BIT (1 << 25) |
|||
#define VERSAL_IOU_SWITCH_CTRL_DIVISOR0_SHIFT 8 |
|||
|
|||
/* IOU SCNTRS */ |
|||
#define VERSAL_IOU_SCNTRS 0xFF140000 |
|||
#define VERSAL_IOU_SCNTRS_COUNTER_CONTROL_REG (VERSAL_IOU_SCNTRS + 0x0) |
|||
#define VERSAL_IOU_SCNTRS_BASE_FREQ (VERSAL_IOU_SCNTRS + 0x20) |
|||
|
|||
#define VERSAL_IOU_SCNTRS_CONTROL_EN 1 |
|||
|
|||
/*******************************************************************************
|
|||
* IRQ constants |
|||
******************************************************************************/ |
|||
#define VERSAL_IRQ_SEC_PHY_TIMER 29 |
|||
|
|||
/*******************************************************************************
|
|||
* UART related constants |
|||
******************************************************************************/ |
|||
#define VERSAL_UART0_BASE 0xFF000000 |
|||
#define VERSAL_UART1_BASE 0xFF010000 |
|||
|
|||
#if VERSAL_CONSOLE_IS(pl011) |
|||
# define VERSAL_UART_BASE VERSAL_UART0_BASE |
|||
#elif VERSAL_CONSOLE_IS(pl011_1) |
|||
# define VERSAL_UART_BASE VERSAL_UART1_BASE |
|||
#else |
|||
# error "invalid VERSAL_CONSOLE" |
|||
#endif |
|||
|
|||
#define PLAT_VERSAL_CRASH_UART_BASE VERSAL_UART_BASE |
|||
#define PLAT_VERSAL_CRASH_UART_CLK_IN_HZ VERSAL_UART_CLOCK |
|||
#define VERSAL_CONSOLE_BAUDRATE VERSAL_UART_BAUDRATE |
|||
|
|||
/*******************************************************************************
|
|||
* Platform related constants |
|||
******************************************************************************/ |
|||
#if VERSAL_PLATFORM_IS(versal_virt) |
|||
# define PLATFORM_NAME "Versal Virt" |
|||
# define VERSAL_UART_CLOCK 25000000 |
|||
# define VERSAL_UART_BAUDRATE 115200 |
|||
# define VERSAL_CPU_CLOCK 62500000 |
|||
#endif |
|||
|
|||
/* Access control register defines */ |
|||
#define ACTLR_EL3_L2ACTLR_BIT (1 << 6) |
|||
#define ACTLR_EL3_CPUACTLR_BIT (1 << 0) |
|||
|
|||
/* For cpu reset APU space here too 0xFE5F1000 CRF_APB*/ |
|||
#define CRF_BASE 0xFD1A0000 |
|||
#define CRF_SIZE 0x00600000 |
|||
|
|||
/* CRF registers and bitfields */ |
|||
#define CRF_RST_APU (CRF_BASE + 0X00000300) |
|||
|
|||
#define CRF_RST_APU_ACPU_RESET (1 << 0) |
|||
#define CRF_RST_APU_ACPU_PWRON_RESET (1 << 10) |
|||
|
|||
/* APU registers and bitfields */ |
|||
#define FPD_APU_BASE 0xFD5C0000 |
|||
#define FPD_APU_CONFIG_0 (FPD_APU_BASE + 0x20) |
|||
#define FPD_APU_RVBAR_L_0 (FPD_APU_BASE + 0x40) |
|||
#define FPD_APU_RVBAR_H_0 (FPD_APU_BASE + 0x44) |
|||
#define FPD_APU_PWRCTL (FPD_APU_BASE + 0x90) |
|||
|
|||
#define FPD_APU_CONFIG_0_VINITHI_SHIFT 8 |
|||
|
|||
#endif /* VERSAL_DEF_H */ |
|||
@ -0,0 +1,185 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#include <gicv3.h> |
|||
#include <interrupt_props.h> |
|||
#include <platform.h> |
|||
#include <platform_def.h> |
|||
#include <utils.h> |
|||
#include "versal_private.h" |
|||
|
|||
/******************************************************************************
|
|||
* The following functions are defined as weak to allow a platform to override |
|||
* the way the GICv3 driver is initialised and used. |
|||
*****************************************************************************/ |
|||
#pragma weak plat_versal_gic_driver_init |
|||
#pragma weak plat_versal_gic_init |
|||
#pragma weak plat_versal_gic_cpuif_enable |
|||
#pragma weak plat_versal_gic_cpuif_disable |
|||
#pragma weak plat_versal_gic_pcpu_init |
|||
#pragma weak plat_versal_gic_redistif_on |
|||
#pragma weak plat_versal_gic_redistif_off |
|||
|
|||
/* The GICv3 driver only needs to be initialized in EL3 */ |
|||
static uintptr_t rdistif_base_addrs[PLATFORM_CORE_COUNT]; |
|||
|
|||
static const interrupt_prop_t versal_interrupt_props[] = { |
|||
PLAT_VERSAL_G1S_IRQ_PROPS(INTR_GROUP1S), |
|||
PLAT_VERSAL_G0_IRQ_PROPS(INTR_GROUP0) |
|||
}; |
|||
|
|||
/*
|
|||
* We save and restore the GICv3 context on system suspend. Allocate the |
|||
* data in the designated EL3 Secure carve-out memory. |
|||
*/ |
|||
static gicv3_redist_ctx_t rdist_ctx __section("versal_el3_tzc_dram"); |
|||
static gicv3_dist_ctx_t dist_ctx __section("versal_el3_tzc_dram"); |
|||
|
|||
/*
|
|||
* MPIDR hashing function for translating MPIDRs read from GICR_TYPER register |
|||
* to core position. |
|||
* |
|||
* Calculating core position is dependent on MPIDR_EL1.MT bit. However, affinity |
|||
* values read from GICR_TYPER don't have an MT field. To reuse the same |
|||
* translation used for CPUs, we insert MT bit read from the PE's MPIDR into |
|||
* that read from GICR_TYPER. |
|||
* |
|||
* Assumptions: |
|||
* |
|||
* - All CPUs implemented in the system have MPIDR_EL1.MT bit set; |
|||
* - No CPUs implemented in the system use affinity level 3. |
|||
*/ |
|||
static unsigned int versal_gicv3_mpidr_hash(u_register_t mpidr) |
|||
{ |
|||
mpidr |= (read_mpidr_el1() & MPIDR_MT_MASK); |
|||
return versal_calc_core_pos(mpidr); |
|||
} |
|||
|
|||
static const gicv3_driver_data_t versal_gic_data __unused = { |
|||
.gicd_base = PLAT_VERSAL_GICD_BASE, |
|||
.gicr_base = PLAT_VERSAL_GICR_BASE, |
|||
.interrupt_props = versal_interrupt_props, |
|||
.interrupt_props_num = ARRAY_SIZE(versal_interrupt_props), |
|||
.rdistif_num = PLATFORM_CORE_COUNT, |
|||
.rdistif_base_addrs = rdistif_base_addrs, |
|||
.mpidr_to_core_pos = versal_gicv3_mpidr_hash |
|||
}; |
|||
|
|||
void __init plat_versal_gic_driver_init(void) |
|||
{ |
|||
/*
|
|||
* The GICv3 driver is initialized in EL3 and does not need |
|||
* to be initialized again in SEL1. This is because the S-EL1 |
|||
* can use GIC system registers to manage interrupts and does |
|||
* not need GIC interface base addresses to be configured. |
|||
*/ |
|||
#if IMAGE_BL31 |
|||
gicv3_driver_init(&versal_gic_data); |
|||
#endif |
|||
} |
|||
|
|||
/******************************************************************************
|
|||
* Versal common helper to initialize the GIC. Only invoked by BL31 |
|||
*****************************************************************************/ |
|||
void __init plat_versal_gic_init(void) |
|||
{ |
|||
gicv3_distif_init(); |
|||
gicv3_rdistif_init(plat_my_core_pos()); |
|||
gicv3_cpuif_enable(plat_my_core_pos()); |
|||
} |
|||
|
|||
/******************************************************************************
|
|||
* Versal common helper to enable the GIC CPU interface |
|||
*****************************************************************************/ |
|||
void plat_versal_gic_cpuif_enable(void) |
|||
{ |
|||
gicv3_cpuif_enable(plat_my_core_pos()); |
|||
} |
|||
|
|||
/******************************************************************************
|
|||
* Versal common helper to disable the GIC CPU interface |
|||
*****************************************************************************/ |
|||
void plat_versal_gic_cpuif_disable(void) |
|||
{ |
|||
gicv3_cpuif_disable(plat_my_core_pos()); |
|||
} |
|||
|
|||
/******************************************************************************
|
|||
* Versal common helper to initialize the per-cpu redistributor interface in |
|||
* GICv3 |
|||
*****************************************************************************/ |
|||
void plat_versal_gic_pcpu_init(void) |
|||
{ |
|||
gicv3_rdistif_init(plat_my_core_pos()); |
|||
} |
|||
|
|||
/******************************************************************************
|
|||
* Versal common helpers to power GIC redistributor interface |
|||
*****************************************************************************/ |
|||
void plat_versal_gic_redistif_on(void) |
|||
{ |
|||
gicv3_rdistif_on(plat_my_core_pos()); |
|||
} |
|||
|
|||
void plat_versal_gic_redistif_off(void) |
|||
{ |
|||
gicv3_rdistif_off(plat_my_core_pos()); |
|||
} |
|||
|
|||
/******************************************************************************
|
|||
* Versal common helper to save & restore the GICv3 on resume from system |
|||
* suspend |
|||
*****************************************************************************/ |
|||
void plat_versal_gic_save(void) |
|||
{ |
|||
/*
|
|||
* If an ITS is available, save its context before |
|||
* the Redistributor using: |
|||
* gicv3_its_save_disable(gits_base, &its_ctx[i]) |
|||
* Additionnaly, an implementation-defined sequence may |
|||
* be required to save the whole ITS state. |
|||
*/ |
|||
|
|||
/*
|
|||
* Save the GIC Redistributors and ITS contexts before the |
|||
* Distributor context. As we only handle SYSTEM SUSPEND API, |
|||
* we only need to save the context of the CPU that is issuing |
|||
* the SYSTEM SUSPEND call, i.e. the current CPU. |
|||
*/ |
|||
gicv3_rdistif_save(plat_my_core_pos(), &rdist_ctx); |
|||
|
|||
/* Save the GIC Distributor context */ |
|||
gicv3_distif_save(&dist_ctx); |
|||
|
|||
/*
|
|||
* From here, all the components of the GIC can be safely powered down |
|||
* as long as there is an alternate way to handle wakeup interrupt |
|||
* sources. |
|||
*/ |
|||
} |
|||
|
|||
void plat_versal_gic_resume(void) |
|||
{ |
|||
/* Restore the GIC Distributor context */ |
|||
gicv3_distif_init_restore(&dist_ctx); |
|||
|
|||
/*
|
|||
* Restore the GIC Redistributor and ITS contexts after the |
|||
* Distributor context. As we only handle SYSTEM SUSPEND API, |
|||
* we only need to restore the context of the CPU that issued |
|||
* the SYSTEM SUSPEND call. |
|||
*/ |
|||
gicv3_rdistif_init_restore(plat_my_core_pos(), &rdist_ctx); |
|||
|
|||
/*
|
|||
* If an ITS is available, restore its context after |
|||
* the Redistributor using: |
|||
* gicv3_its_restore(gits_base, &its_ctx[i]) |
|||
* An implementation-defined sequence may be required to |
|||
* restore the whole ITS state. The ITS must also be |
|||
* re-enabled after this sequence has been executed. |
|||
*/ |
|||
} |
|||
@ -0,0 +1,24 @@ |
|||
/*
|
|||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. |
|||
* |
|||
* SPDX-License-Identifier: BSD-3-Clause |
|||
*/ |
|||
|
|||
#ifndef VERSAL_PRIVATE_H |
|||
#define VERSAL_PRIVATE_H |
|||
|
|||
#include <xlat_tables.h> |
|||
|
|||
void versal_config_setup(void); |
|||
|
|||
const mmap_region_t *plat_versal_get_mmap(void); |
|||
|
|||
void plat_versal_gic_driver_init(void); |
|||
void plat_versal_gic_init(void); |
|||
void plat_versal_gic_cpuif_enable(void); |
|||
void plat_versal_gic_cpuif_disable(void); |
|||
void plat_versal_gic_pcpu_init(void); |
|||
|
|||
unsigned int versal_calc_core_pos(u_register_t mpidr); |
|||
|
|||
#endif /* VERSAL_PRIVATE_H */ |
|||
Loading…
Reference in new issue