Documentation: Fix broken links in ToCs

Change-Id: I4fcdb8e813e0392c2cd3d0623698e8319b3b0593

docs/firmware-design.md

@@ -8,7 +8,7 @@ Contents :
 3.  [EL3 runtime services framework](#3--el3-runtime-services-framework)
 4.  [Power State Coordination Interface](#4--power-state-coordination-interface)
 5.  [Secure-EL1 Payloads and Dispatchers](#5--secure-el1-payloads-and-dispatchers)
-6.  [Crash Reporting in BL31](#6--crash-reporting-in-bl3-1)
+6.  [Crash Reporting in BL31](#6--crash-reporting-in-bl31)
 7.  [Guidelines for Reset Handlers](#7--guidelines-for-reset-handlers)
 8.  [CPU specific operations framework](#8--cpu-specific-operations-framework)
 9.  [Memory layout of BL images](#9-memory-layout-of-bl-images)
@@ -1454,8 +1454,8 @@ The ARM development platforms' policy is to only allow loading of a known set of
 images. The platform policy can be modified to allow additional images.
 
 
-11. Use of coherent memory in Trusted Firmware
+11.  Use of coherent memory in Trusted Firmware
-----------------------------------------------
+-----------------------------------------------
 
 There might be loss of coherency when physical memory with mismatched
 shareability, cacheability and memory attributes is accessed by multiple CPUs

docs/firmware-update.md

@@ -3,11 +3,11 @@ ARM Trusted Firmware - Firmware Update Design Guide
 
 Contents :
 
-1.  [Introduction](#1-introduction)
+1.  [Introduction](#1--introduction)
-2.  [FWU Overview](#2-fwu-overview)
+2.  [FWU Overview](#2--fwu-overview)
-3.  [Image Identification](#3-image-identification)
+3.  [Image Identification](#3--image-identification)
-4.  [FWU State Machine](#4-fwu-state-machine)
+4.  [FWU State Machine](#4--fwu-state-machine)
-5.  [SMC Interface](#5-smc-interface)
+5.  [BL1 SMC Interface](#5--bl1-smc-interface)
 
 - - - - - - - - - - - - - - - - - -
 
@@ -35,8 +35,8 @@ FWU images, please refer to the "Non-Trusted Firmware Updater" requirements in
 the TBBR.
 
 
-2. FWU Overview
+2.  FWU Overview
----------------
+----------------
 
 The FWU boot flow is primarily mediated by BL1. Since BL1 executes in ROM, and
 it is usually desirable to minimize the amount of ROM code, the design allows
@@ -73,8 +73,8 @@ use all defined FWU images. Other platforms may use a subset of these.
 ![Flow Diagram](diagrams/fwu_flow.png?raw=true)
 
 
-3. Image Identification
+3.  Image Identification
------------------------
+------------------------
 
 Each FWU image and certificate is identified by a unique ID, defined by the
 platform, which BL1 uses to fetch an image descriptor (`image_desc_t`) via a
@@ -135,7 +135,7 @@ The following is a brief description of the supported states:
 
 
 5.  BL1 SMC Interface
------------------
+---------------------
 
 ### BL1_SMC_CALL_COUNT
 

docs/interrupt-framework-design.md

@@ -10,7 +10,7 @@ Contents :
         -   [Valid Routing Models](#113-valid-routing-models)
             +   [Secure-EL1 Interrupts](#1131-secure-el1-interrupts)
             +   [Non-secure Interrupts](#1132-non-secure-interrupts)
-            +   [EL3 interrupts](#1133-el3_interrupts)
+            +   [EL3 interrupts](#1133-el3-interrupts)
         -   [Mapping of Interrupt Type to Signal](#114-mapping-of-interrupt-type-to-signal)
             +   [Effect of mapping of several interrupt types to one signal](#1141-effect-of-mapping-of-several-interrupt-types-to-one-signal)
         -   [Assumptions in Interrupt Management Framework](#12-assumptions-in-interrupt-management-framework)