This change avoids generating a build message source file on the shell,
instead using the `__DATE__` and `__TIME__` macros directly.
Change-Id: Ieda75bbac174847c716701bce8dd10b8e9975902
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.
The `silent` and `verbose` variables are boolean values determining
whether the build system has been configured to run silently or
verbosely respectively (i.e. with `--silent` or `V=1`).
These two modes cannot be used together - if `silent` is truthy then
`verbose` is always falsy. As such:
make --silent V=1
... results in a silent build.
In addition to these boolean variables, we also introduce two new
variables - `s` and `q` - for use in rule recipes to conditionally
suppress the output of commands.
When building silently, `s` expands to a value which disables the
command that follows, and `q` expands to a value which supppresses
echoing of the command:
$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed but not echoed'
When building verbosely, `s` expands to a value which disables the
command that follows, and `q` expands to nothing:
$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed and echoed'
In all other cases, both `s` and `q` expand to a value which suppresses
echoing of the command that follows:
$(s)echo 'This command is executed but not echoed'
$(q)echo 'This command is executed but not echoed'
The `s` variable is predominantly useful for `echo` commands, where you
always want to suppress echoing of the command itself, whilst `q` is
more useful for all other commands.
Change-Id: I8d8ff6ed714d3cb401946c52955887ed7dca602b
Signed-off-by: Chris Kay <chris.kay@arm.com>
OpenSSL has brainpool support only since version 1.1.0, make sure we
put a proper guardrail around it.
Change-Id: Ia2ee686904ed80699f77b1da953546ab7538ec37
Signed-off-by: Donald Chan <donachan@tesla.com>
Currently when RSA-PSS signing is invoked, a salt length of 32 bytes
is assumed. This works well when SHA-256 is the digest algorithm, but
the standard industry practice is that the salt length should follow
the digest length (e.g. 48/64 bytes for SHA-384/SHA-512).
Various cloud services' key management services (KMS) offering have
such restrictions in place, so if someone wants to integrate cert_create
against these services for signing key/content certs, they will have
problem with integration.
Furthermore, JWS (RFC7518) defined these specific combinations as valid
specs and other combinations are not supported:
- PS256: RSASSA-PSS using SHA-256 and MGF1 with SHA-256
- PS384: RSASSA-PSS using SHA-384 and MGF1 with SHA-384
- PS512: RSASSA-PSS using SHA-512 and MGF1 with SHA-512
Change-Id: Iafc7c60ccb36f4681053dbeb4147bac01b9d724d
Signed-off-by: Donald Chan <donachan@tesla.com>
This change migrates the values of `CC`, `CPP`, `AS` and other toolchain
variables to the new `$(toolchain)-$(tool)` variables, which were
introduced by the toolchain refactor patch. These variables should be
equivalent to the values that they're replacing.
Change-Id: I644fe4ce82ef1894bed129ddb4b6ab94fb04985d
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change refactors how we identify the toolchain, with the ultimate
aim of eventually cleaning up the various mechanisms that we employ to
configure default tools, identify the tools in use, and configure
toolchain flags.
To do this, we introduce three new concepts in this change:
- Toolchain identifiers,
- Tool class identifiers, and
- Tool identifiers.
Toolchain identifiers identify a configurable chain of tools targeting
one platform/machine/architecture. Today, these are:
- The host machine, which receives the `host` identifier,
- The AArch32 architecture, which receives the `aarch32` identifier, and
- The AArch64 architecture, which receivs the `aarch64` identifier.
The tools in a toolchain may come from different vendors, and are not
necessarily expected to come from one single toolchain distribution. In
most cases it is perfectly valid to mix tools from different toolchain
distributions, with some exceptions (notably, link-time optimization
generally requires the compiler and the linker to be aligned).
Tool class identifiers identify a class (or "role") of a tool. C
compilers, assemblers and linkers are all examples of tool classes.
Tool identifiers identify a specific tool recognized and supported by
the build system. Every tool that can make up a part of a toolchain must
receive a tool identifier.
These new identifiers can be used to retrieve information about the
toolchain in a more standardized fashion.
For example, logic in a Makefile that should only execute when the C
compiler is GNU GCC can now check the tool identifier for the C compiler
in the relevant toolchain:
ifeq ($($(ARCH)-cc-id),gnu-gcc)
...
endif
Change-Id: Icc23e43aaa32f4fd01d8187c5202f5012a634e7c
Signed-off-by: Chris Kay <chris.kay@arm.com>
When key_load() attempts to load the key from a file and it fails to
open this file, the 'err_code' output argument is set to
'KEY_ERR_OPEN' error code. However, it is incorrectly overwritten
later on with 'KEY_ERR_NONE' or 'KEY_ERR_LOAD'.
The latter case messes up with the key creation scenario. The
'KEY_ERR_LOAD' error leads the tool to exit, when it should attempt to
create the said key file if invoked with the --new-keys/-n option.
Note that, to complicate matters further, which of 'KEY_ERR_OPEN' or
'KEY_ERR_NONE' values is returned by key_load() depends on the version
of OpenSSL in use:
- If using v3+, KEY_ERROR_LOAD is returned.
- If using <v3, KEY_ERROR_NONE is returned as a result of the key
pair container being initialized by key_new().
This patch fixes this bug and also takes the opportunity to refactor
key_load() implementation to (hopefully) make it more straight-forward
and easier to reason about.
Fixes: 616b3ce27d "feat(cert-create): add pkcs11 engine support"
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Reported-by: Wenchen Tan <xtaens@qq.com>
Change-Id: Ia78ff442e04c5ff98e6ced8d26becbd817a8ccb7
Add pkcs11 engine support which allows using keys that are securely
stored on a HSM or TPM. To use this feature the user has to supply
an RFC 7512 compliant PKCS11 URI to a key instead of a file as an
argument to one of the key options. This change is fully backwards
compatible.
This change makes use of the openssl engine API which is deprecated
since openssl 3.0 and will most likely be removed in version 4. So
pkcs11 support will have to be updated to the openssl provider API
in the near future.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Change-Id: If96725988ca62c5613ec59123943bf15922f5d1f
key->key and k will point to the same if PEM_read_PrivateKey
(pem_read_bio_key_decoder) succeeds. There is no need for the temporary
'k' pointer here.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Change-Id: I219c49d331eb6dd7200b49b75d47fd66da3d82dd
In their respective makefiles, cert_create, encrypt_fw and fiptool
depend on the --openssl phony target as a prerequisite. This forces
those tools to be re-linked each time.
Move the dependencies on the --openssl target from the tools to their
makefiles all targets, to avoid unnecessary linking while preserving the
OpenSSL version printing done in the --openssl targets when in debug.
Fixes: cf2dd17ddd ("refactor(security): add OpenSSL 1.x compatibility")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Change-Id: I98a3ab30f36dffc253cecaaf3a57d2712522135d
Extends cert_create tool with a new option for CCA NV
counter: ccafw_nvctr.
And changes the non-volatile counter used to protect
the CCA Content Certificate from the Trusted FW NV counter
to the CCA FW NV counter in the CCA CoT description.
Change-Id: I27f3ab2e25809f0dcc56fa05e5c3a25a2e861ef6
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
SAVE_KEYS is set to '0' by default, causing cert_create to
show the 'Key filename not specified' message on each run
even though this is perfectly normal. Show the message only
in the VERBOSE log level.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Change-Id: I472cdec2670055ab0edd99d172f79d01ad575972
Updated cert_tool to be able to select brainpool P256r/t1
or NIST prim256v1 curve for certificates signature.
Change-Id: I6e800144697069ea83660053b8ba6e21c229243a
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
When updated to work with OpenSSL 3.0, the host tools lost their
compatibility with previous versions (1.x) of OpenSSL. This is
mainly due to the fact that 1.x APIs became deprecated in 3.0 and
therefore their use cause compiling errors. In addition, updating
for a newer version of OpenSSL meant improving the stability
against security threats. However, although version 1.1.1 is
now deprecated, it still receives security updates, so it would
not imply major security issues to keep compatibility with it too.
This patch adds backwards compatibility with OpenSSL 1.x versions
by adding back 1.x API code. It defines a macro USING_OPENSSL3,
which will select the appropriate OpenSSL API version depending on
the OpenSSL library path chosen (which is determined by the
already-existing OPENSSL_DIR variable).
In addition, cleanup items were packed in functions and moved to
the proper modules in order to make the code more maintainable and
legible.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I8deceb5e419edc73277792861882404790ccd33c
Selection of the cca chain of trust is done through the COT build
option:
> make COT=cca
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I123c0a841f67434633a3123cc1fa3e2318585482
Host tools cert_tool and encrypt_fw refactored to be fully
compatible with OpenSSL v3.0.
Changes were made following the OpenSSL 3.0 migration guide:
https://www.openssl.org/docs/man3.0/man7/migration_guide.html
In some cases, those changes are straightforward and only
a small modification on the types or API calls was needed
(e.g.: replacing BN_pseudo_rand() with BN_rand(). Both identical
since v1.1.0).
The use of low level APIs is now deprecated. In some cases,
the new API provides a simplified solution for our goals and
therefore the code was simplified accordingly (e.g.: generating
RSA keys through EVP_RSA_gen() without the need of handling the
exponent). However, in some cases, a more
sophisticated approach was necessary, as the use of a context
object was required (e.g.: when retrieving the digest value from
an SHA file).
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I978e8578fe7ab3e71307450ebe7e7812fbcaedb6
Changes to 'tools/cert_create' folder, to include platform defined
certificates, keys, and extensions.
NXP SoC lx2160a : based platforms requires additional
FIP DDR to be loaded before initializing the DDR.
To enable chain of trust on these platforms, FIP DDR
image needs to be authenticated, additionally.
Platform specific folder 'tools/nxp/cert_create_helper'
is added to support platform specific macros and definitions.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I4752a30a9ff3aa1d403e9babe3a07ba0e6b2bf8f
This bug manifests itself as a segfault triggered by a double-free.
I noticed that right before the double-free, the sk list contained 2
elements with the same address.
(gdb) p sk_X509_EXTENSION_value(sk, 1)
$34 = (X509_EXTENSION *) 0x431ad0
(gdb) p sk_X509_EXTENSION_value(sk, 0)
$35 = (X509_EXTENSION *) 0x431ad0
(gdb) p sk_X509_EXTENSION_num(sk)
$36 = 2
This caused confusion; this should never happen.
I figured that this was caused by a ext_new_xxxx function freeing
something before it is added to the list, so I put a breakpoint on
each of them to step through. I was suprised to find that none of my
breakpoints triggered for the second element of the iteration through
the outer loop just before the double-free.
Looking through the code, I noticed that it's possible to avoid doing
a ext_new_xxxx, when either:
* ext->type == NVCOUNTER and ext->arg == NULL
* ext->type == HASH and ext->arg == NULL and ext->optional == false
So I put a breakpoint on both.
It turns out that it was the HASH version, but I added a fix for both.
The fix for the Hash case is simple, as it was a mistake. The fix for
the NVCOUNTER case, however, is a bit more subtle. The NVCOUNTER may
be optional, and when it's optional we can skip it. The other case,
when the NVCOUNTER is required (not optinal), the `check_cmd_params`
function has already verified that the `ext->arg` must be non-NULL.
We assert that before processing it to covert any possible segfaults
into more descriptive errors.
This should no longer cause double-frees by adding the same ext twice.
Change-Id: Idae2a24ecd964b0a3929e6193c7f85ec769f6470
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
The certification tool creates all the certificates mentioned
statically in the code rather than taking explicit certificate
requests from the command line parameters.
Code is optimized to avoid unnecessary attempts to create
non-requested certificates.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I78feac25bc701bf8f08c6aa5a2e1590bec92d0f2
Don't depend on clean when building, as the user is capable of cleaning
if required and this introduces a race where "all" depends on both the
compile and the clean in parallel. It's quite possible for some of the
compile to happen in parallel with the clean, which results in the link
failing as objects just built are missing.
Change-Id: I710711eea7483cafa13251c5d94ec693148bd001
Signed-off-by: Ross Burton <ross.burton@arm.com>
When OpenSSL's macro allocates the HASH struct, it allocates the fields
as well. After this allocation, the prior code would assign over the
pointers inside the HASH struct, leaking these fields. This patch
avoids allocating extra copies of these members.
Change-Id: I50a38b0a04b52ec54d6388db0f694feb578d2818
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Previously, we would leak these extensions as they are not freed by the
stack. An except from the `sk_TYPE_free` documentation:
sk_TYPE_free() frees up the sk structure. It does not free up any
elements of sk. After this call sk is no longer valid.
The fix is to drain the stack and free its elements before freeing the
stack. sk_TYPE_pop_free does this, so we use that instead.
Change-Id: Ie70c302f9dda5af1a7243f163d36e99916ee639c
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
This patch: fafd3ec9c assumes that tools must build from
the main makefile folder.
This assumption leads to the error when somebody wants to
build a tool from the tool's folder.
Hence changes are done to provide the default binary name
in the tool's makefile.
Change-Id: Iae570a7f8d322151376b6feb19e739300eecc3fc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Currently, the tool's makefile override the tool's binary name
which is already been defined in the main makefile.
Hence fix is provided so that the tool's makefile get the tool's
binary name from the main makefile instead of overriding it.
Change-Id: I8af2bd391a96bba2dbcddef711338a94ebf5f038
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Add support to generate a certificate named "plat-sp-cert" for Secure
Partitions(SP) owned by Platform.
Earlier a single certificate file "sip-sp-cert" was generated which
contained hash of all 8 SPs, with this change SPs are divided into
two categories viz "SiP owned" and "Plat owned" containing 4 SPs each.
Platform RoT key pair is used for signing.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I5bd493cfce4cf3fc14b87c8ed1045f633d0c92b6
Updated cert_tool to add hash information of fw_config image into
the existing "trusted boot fw" certificate.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I720319225925806a2a9f50a1ac9c8a464be975f0
with sha 0792dd7, support to generate certificate for Secure
Partitions was added for dualroot CoT only, this patch extends
this support for tbbr CoT.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I451c0333536dd1cbe17861d454bdb0dc7a17c63f
Add support to generate certificate "sip-sp-cert" for Secure
Partitions(SP) owned by Silicon provider(SiP).
To avoid deviation from TBBR specification the support is only added for
dualroot CoT and not for TBBR CoT.
A single certificate file is generated containing hash of individual
packages. Maximum 8 secure partitions are supported.
Following new options added to cert_tool:
--sip-sp-cert --> SiP owned Secure Partition Content Certificate
--sp-pkg1 --> Secure Partition Package1 file
--sp-pkg2
.....
--sp-pkg8
Trusted world key pair is used for signing.
Going forward, this feature can be extended for Platfrom owned
Partitions, if required.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ia6dfbc1447cfb41b1fcbd12cf2bf7b88f409bd8d
Selection of the chain of trust is done through the COT build option:
> make COT=dualroot
Change-Id: Id87c7a5116bdd13bdb29645ecf31d111ad094c1e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
In preparation of supporting alternate chains of trust, reword comments
and error messages that explicitly mentioned TBBR.
Change-Id: I85a0b08e16d0cd82f3b767fcc092d1f20f45939f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
It allows to select the desired chain of trust. Right now, only the TBBR
CoT is available.
At this stage, this build option only affects the tool itself. It is not
plugged into the rest of the build system yet. To use it:
> make -C tools/cert_create COT=tbbr
Change-Id: I4484418f76d3c7b330d8653c978499a181534dcd
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Move all TBBR-specific stuff out of the tool's makefile into a
sub-makefile. This will make it easier to define and select an alternate
chain of trust in the future.
Change-Id: I92e366a1999b74cf51127d1771b64b807cd94b29
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The chain of trust definitions are only needed in the part of the code
dealing with the TBBR CoT (tbbr/* files).
Change-Id: I6f9a86bba4a2d16313b6842a3ec85b7c951074bc
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Support for PKCS#1 v1.5 was deprecated in SHA 1001202 and fully removed
in SHA fe199e3, however, cert_tool is still able to generate
certificates in that form. This patch fully removes the ability for
cert_tool to generate these certificates.
Additionally, this patch also fixes a bug where the issuing certificate
was a RSA and the issued certificate was EcDSA. In this case, the issued
certificate would be signed using PKCS#1 v1.5 instead of RSAPSS per
PKCS#1 v2.1, preventing TF-A from verifying the image signatures. Now
that PKCS#1 v1.5 support is removed, all certificates that are signed
with RSA now use the more modern padding scheme.
Change-Id: Id87d7d915be594a1876a73080528d968e65c4e9a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
cert_tool is now able to accept a command line option for specifying the
key size. It now supports the following options: 1024, 2048 (default),
3072 and 4096. This is also modifiable by TFA using the build flag
KEY_SIZE.
Change-Id: Ifadecf84ade3763249ee8cc7123a8178f606f0e5
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
The valgrind checks for cert_create have not been run in a long while -
as such there are a few memory leaks present. This patch fixes a few of
the major ones reported by valgrind. However, a few do remain.
Change-Id: Iab002fb2b0090043287d43fb54a4d18928c2ed85
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
HOSTCC should be used in any of the tools inside the tools/ directory
instead of CC. That way it is possible to override both values from the
command line when building the Trusted Firmware and the tools at the
same time. Also, use HOSTCCFLAGS instead of CFLAGS.
Also, instead of printing the strings CC and LD in the console during
the compilation of the tools, HOSTCC and HOSTLD have to be used for
clarity. This is how it is done in other projects like U-Boot or Linux.
Change-Id: Icd6f74c31eb74cdd1c353583399ab19e173e293e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Print_help was used in different contexts and returning no
error in that function was hiding the error when incorrect
options were used.
Change-Id: Ic3f71748be7ff8440c9d54810b986e9f177f4439
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
This patch implements support for adding dynamic configurations for
BL31 (soc_fw_config), BL32 (tos_fw_config) and BL33 (nt_fw_config). The
necessary cert tool support and changes to default chain of trust are made
for these configs.
Change-Id: I25f266277b5b5501a196d2f2f79639d838794518
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Spurious whitespace existed in the BINARY shell variable which meant
the cert_tool executable was not being removed on 'make realclean'.
Change-Id: Ibfd2fd17889514f6613e33c6df58d53b9232ec14
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>
Since we use "?=" to set PLATFORM_ROOT, it is better to change the
name to be more special, or else it may be overridden by some
environment variables, such as in some CI build environments.
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
This patch updates the `fiptool` and `cert_create` for the
`hw_config` and `tb_fw_config` dynamic configuration files.
The necessary UUIDs and OIDs are assigned to these files and
the `cert_create` is updated to generate appropriate hashes
and include them in the "Trusted Boot FW Certificate". The
`fiptool` is updated to allow the configs to be specified
via cmdline and included in the generated FIP.
Change-Id: I940e751a49621ae681d14e162aa1f5697eb0cb15
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This option enables the user to select the secure hash algorithm
to be used for generating the hash. It supports the following
options:
- sha256 (default)
- sha384
- sha512
Change-Id: Icb093cec1b5715e248c3d1c3749a2479a7ab4b89
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>
Commit a8eb286ada introduced the
following error when creating ECDSA certificates.
ERROR: Error creating key 'Trusted World key'
Makefile:634: recipe for target 'certificates' failed
make: *** [certificates] Error 1
this patch adds the function to create PKCS#1 v1.5.
Change-Id: Ief96d55969d5e9877aeb528c6bb503b560563537
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>
Chris Kay
Donald Chan
Sandrine Bailleux
laurenw-arm
Robin van der Gracht
Vincent Stehlé
Lionel Debieve
Juan Pablo Conde
Pankaj Gupta
Jimmy Brisson
Manish V Badarkhe
Ross Burton
Manish Pandey
Justin Chadwell
Paul Beesley
Antonio Nino Diaz
Ying-Chun Liu (PaulLiu)
Roberto Vargas
Soby Mathew
Jonathan Wright
Heyi Guo
Qixiang Xu