If AACRH32_SP is not specified, it causes the DEFAULT_LINKER_SCRIPT
variable to be empty, and then the linker takes the variable following
it as if it was the linker script, which is not one. This patch
addresses that issue by requiring the AARCH32_SP variable to be set
before continuing.
Change-Id: I21db7d5bd86b98faaa1a1cd3f985daa592556a2d
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
TF-A makefile accepts a device-tree snippet to override hardcoded SP
nodes, via the `ARM_BL2_SP_LIST_DTS` variable. However the SPs declared
in `ARM_BL2_SP_LIST_DTS` must be in the same order as they are in the
FIP image, otherwise hash authentication will fail when loaded by BL2.
This patch generates the `ARM_BL2_SP_LIST_DTS` file from the
`sp_layout.json` file. The SPs in the FIP image are also generated from
`sp_layout.json`, so this ensures that there is only one source of truth
for the SP list, removing the possibility to have the lists disagree
with each other.
Signed-off-by: Karl Meakin <karl.meakin@arm.com>
Change-Id: I7d76715135c596605c6a02aad5196d967dfeb1ce
Add header file to help with creation of SPMD logical partitions. Also
update linker files to create sections to record SPMD logical partitions
declared. This follows the same pattern as the EL3 SPMC's logical
partitions. This patch also adds initialization of SPMD logical
partitions when the SPMD comes up.
ENABLE_SPMD_LP is a build flag that is used to enable support for
SPMD logical partitions.
Note that the approach chosen is to keep SPMD and SPMC logical
partition support separate, as opposed to extend the existing SPMC
logical partition support since the code would need to have a number of
ifdefs and the interactions with various build options such as
SPMC_AT_EL3 needs to be accounted for, which would make code more
complicated.
Signed-off-by: Raghu Krishnamurthy <raghu.ncstate@gmail.com>
Change-Id: I9642ddbf6ea26dd3f4a283baec598d61c07e3661
Current build infra uses ARM_ARCH_MAJOR/MINOR to come up with march
version and uses that march version with the compiler.
However in certain situations this is not ideal, like for example when
we build with gcc-11 which supports only till march=armv8.5 but
we need to build for 8.8 build, this means we need to bump down
MAJOR/MINOR and we can't rely on major and minor values from the
platform to select march value and build infra doesn't even try
to compile and fails with not supported MAJOR/MINOR.
By adding a march build helper we try to check if compiler supports
given march value from MAJOR/MINOR values from platform, if compiler
doesn't support then we try to check what's the max or best supported
march version by compiler and choose that march value and try to
compile with that.
This is a supportive mechanism which will decouple march reliance on
MAJOR/MINOR values from platform and will pave way for setting up
enabling of features based on MAJOR/MINOR without worrying about the
compiler not supporting given MAJOR/MINOR.
Also in TF-A we use generic instructions without much reliance or need
for exact march necessity. So enabling and building features from
armv-8.8 using an armv-8.5 march value is still going to be fine.
Please note: Platforms are free to freeze their march values using
`MARCH_DIRECTIVE`. In absence of this define we are going to poke
the compiler and come up with a potential march value.
Change-Id: I673061a269ec9018ff12e75dc375979f5e33b7d1
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
The FEAT_MTPMU feature disable runs very early after reset. This means,
it needs to be written in assembly, since the C runtime has not been
initialised yet.
However, there is no need for it to be initialised so soon. The PMU
state is only relevant after TF-A has relinquished control. The code
to do this is also very verbose and difficult to read. Delaying the
initialisation allows for it to happen with the rest of the PMU. Align
with FEAT_STATE in the process.
BREAKING CHANGE: This patch explicitly breaks the EL2 entry path. It is
currently unsupported.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I2aa659d026fbdb75152469f6d19812ece3488c6f
The enablement code for the PMU is scattered and difficult to track
down. Factor out the feature into its own lib/extensions folder and
consolidate the implementation. Treat it is as an architecturally
mandatory feature as it is currently.
Additionally, do some cleanup on AArch64. Setting overflow bits in
PMCR_EL0 is irrelevant for firmware so don't do it. Then delay the PMU
initialisation until the context management stage which simplifies the
early environment assembly. One side effect is that the PMU might count
before this happens so reset all counters to 0 to prevent any leakage.
Finally, add an enable to manage_extensions_realm() as realm world uses
the pmu. This introduces the HPMN fixup to realm world.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Ie13a8625820ecc5fbfa467dc6ca18025bf6a9cd3
Both march32-directive and march64-directive eventually generate the
same march option that will passed to compiler.
Merge this two separate directives to a common one as march-directive.
Change-Id: I220d2b782eb3b54e13ffd5b6a581d0e6da68756a
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Presently, we have an explicit section to add definitions, wherein
we evaluate the definitions after being overwritten by the platform.
To keep it aligned with this pattern, SVE_VECTOR_LEN is moved here.
Change-Id: Ia3373d954a7ee97980fe72d5a069e202352f25b1
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Presently, Makefile is unsystematic with no precise ordering
of configuration and commands.
This patch addresses this issue, by sorting and arranging the related
sections in an order, which helps in maintaining it precisely.
Further, this assists developers in identifying the concerned section
and add related changes appropriately with ease.
Additionally, SIMICS build option linked to Intel platform, has been
removed, as there is no platform specific support to utilise it.
[https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/16737]
Change-Id: I72c09905334f94f803cdfd85f56e2c9572f9b3ef
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
The cpu_macros.S file is loaded with lots of definitions for the cpu_ops
structure. However, since they are defined as .equ directives they are
inaccessible for C code. Convert them to #defines, put them into order,
refactor them for readability, and extract them to a separate file to
make this possible.
This has the benefit of removing some Aarch differences and a lot of
duplicate code.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I72861794b6c9131285a9297d5918822ed718b228
This patch enables CTX_INCLUDE_PAUTH_REGS for RME builds.
The RMM-EL3 specification is also updated to reflect the changes
and also version of the same is bumped from 0.1 to 0.2.
Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>
Change-Id: I2e96a592d2b75abaee24294240c1727c5ceba420
Make the symbol table produced by the memory mapping script more
readable. Add a generic interface for interacting with ELF binaries.
This interface enables us to get symbols that provide some insights into
TF-A's memory usage.
Change-Id: I6646f817a1d38d6184b837b78039b7465a533c5c
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
At the moment we only support FEAT_RAS to be either unconditionally
compiled in, or to be not supported at all.
Add support for runtime detection (FEAT_RAS=2), by splitting
is_armv8_2_feat_ras_present() into an ID register reading function and
a second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we access RAS related registers.
Also move the context saving code from assembly to C, and use the new
is_feat_ras_supported() function to guard its execution.
Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.
Change-Id: I30498f72fd80b136850856244687400456a03d0e
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
The current usage of RAS_EXTENSION in TF-A codebase is to cater for two
things in TF-A :
1. Pull in necessary framework and platform hooks for Firmware first
handling(FFH) of RAS errors.
2. Manage the FEAT_RAS extension when switching the worlds.
FFH means that all the EAs from NS are trapped in EL3 first and signaled
to NS world later after the first handling is done in firmware. There is
an alternate way of handling RAS errors viz Kernel First handling(KFH).
Tying FEAT_RAS to RAS_EXTENSION build flag was not correct as the
feature is needed for proper handling KFH in as well.
This patch breaks down the RAS_EXTENSION flag into a flag to denote the
CPU architecture `ENABLE_FEAT_RAS` which is used in context management
during world switch and another flag `RAS_FFH_SUPPORT` to pull in
required framework and platform hooks for FFH.
Proper support for KFH will be added in future patches.
BREAKING CHANGE: The previous RAS_EXTENSION is now deprecated. The
equivalent functionality can be achieved by the following
2 options:
- ENABLE_FEAT_RAS
- RAS_FFH_SUPPORT
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I1abb9ab6622b8f1b15712b12f17612804d48a6ec
With gcc-12 any lower address access can trigger a warning/error
this would be useful in other parts of system but in TF-A
there are various reasons to access to the lower address ranges,
example using mmio_read_*/writes_*
So setup to allow access to lower addresses while using gcc-12
Change-Id: Id1b4012b13bc6876d83b90a347fee12478a1921d
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Workaround to help enable the kernel to query errata status using the
errata abi feature for platforms with a non-arm interconnect.
Change-Id: I47b03eaee5a0a763056ae71883fa30dfacb9b3f7
Signed-off-by: Sona Mathew <SonaRebecca.Mathew@arm.com>
This patch adds the errata management firmware interface for lower ELs
to discover details about CPU erratum. Based on the CPU erratum
identifier the interface enables the OS to find the mitigation of an
erratum in EL3.
The ABI can only be present in a system that is compliant with SMCCCv1.1
or higher. This implements v1.0 of the errata ABI spec.
For details on all possible return values, refer the design
documentation below:
ABI design documentation:
https://developer.arm.com/documentation/den0100/1-0?lang=en
Signed-off-by: Sona Mathew <SonaRebecca.Mathew@arm.com>
Change-Id: I70f0e2569cf92e6e02ad82e3e77874546232b89a
Currently, enabling SME forces SVE off. However, the SME enablement
requires SVE to be enabled, which is reflected in code. This is the
opposite of what the build flags require.
Further, the few platforms that enable SME also explicitly enable SVE.
Their platform.mk runs after the defaults.mk file so this override never
materializes. As a result, the override is only present on the
commandline.
Change it to something sensible where if SME is on then code can rely on
SVE being on too. Do this with a check in the Makefile as it is the more
widely used pattern. This maintains all valid use cases but subtly
changes corner cases no one uses at the moment to require a slightly
different combination of flags.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: If7ca3972ebc3c321e554533d7bc81af49c2472be
It is needed to check the validity of boolean flags with the updated
macro assert_boolean.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I185beb55606a4ca435d2fee2092fc61725859aa1
This patch introduces support to handle traps from lower ELs for
IMPDEF system register accesses. The actual support is left to the
platforms to implement.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I623d5c432b4ce4328b68f238c15b1c83df97c1e5
ENABLE_RME is set then SPD must either be spmd or it should not be set.
Add a rule to assert this.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I0556e7b0e55b04c3a8e4c20c991fbbc30486570c
FEAT_SME2 is an extension of FEAT_SME and an optional feature
from v9.2. Its an extension of SME, wherein it not only
processes matrix operations efficiently, but also provides
outer-product instructions to accelerate matrix operations.
It affords instructions for multi-vector operations.
Further, it adds an 512 bit architectural register ZT0.
This patch implements all the changes introduced with FEAT_SME2
to ensure that the instructions are allowed to access ZT0
register from Non-secure lower exception levels.
Additionally, it adds support to ensure FEAT_SME2 is aligned
with the existing FEATURE DETECTION mechanism, and documented.
Change-Id: Iee0f61943304a9cfc3db8f986047b1321d0a6463
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Arm v9.4 introduces support for Guarded Control Stack, providing
mitigations against some forms of RPO attacks and an efficient mechanism
for obtaining the current call stack without requiring a full stack
unwind. Enable access to this feature for EL2 and below, context
switching the newly added EL2 registers as appropriate.
Change the FVP platform to default to handling this as a dynamic option
so the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I691aa7c22e3547bb3abe98d96993baf18c5f0e7b
Arm v8.9 introduces a series of features providing a new way to set memory
permissions. Instead of directly encoding the permissions in the page
tables the PTEs contain indexes into an array of permissions stored in
system registers, allowing greater flexibility and density of encoding.
Enable access to these features for EL2 and below, context switching the
newly added EL2 registers as appropriate. Since all of FEAT_S[12]P[IO]E
are separately discoverable we have separate build time options for
enabling them, but note that there is overlap in the registers that they
implement and the enable bit required for lower EL access.
Change the FVP platform to default to handling them as dynamic options so
the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: Icf89e444e39e1af768739668b505661df18fb234
Add support for runtime detection (ENABLE_SVE_FOR_NS=2), by splitting
sve_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SVE specific setup.
Change the FVP platform default to the now supported dynamic
option (=2), so the right decision can be made by the code at runtime.
Change-Id: I1caaba2216e8e2a651452254944a003607503216
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Add support for runtime detection (ENABLE_SME_FOR_NS=2), by splitting
feat_sme_supported() into an ID register reading function and a
second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we do SME specific setup.
Change the FVP platform default to the now supported dynamic option
(=2),so the right decision can be made by the code at runtime.
Change-Id: Ida9ccf737db5be20865b84f42b1f9587be0626ab
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
So far we have the ENABLE_AMU build option to include AMU register
handling code for enabling and context switch. There is also an
ENABLE_FEAT_AMUv1 option, solely to protect the HAFGRTR_EL2 system
register handling. The latter needs some alignment with the new feature
scheme, but it conceptually overlaps with the ENABLE_AMU option.
Since there is no real need for two separate options, unify both into a
new ENABLE_FEAT_AMU name in a first step. This is mostly just renaming at
this point, a subsequent patch will make use of the new feature handling
scheme.
Change-Id: I97d8a55bdee2ed1e1509fa9f2b09fd0bdd82736e
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
FEAT_SB introduces a new speculation barrier instruction, that is more
lightweight than a "dsb; isb" combination. We use that in a hot path,
so cannot afford and don't want a runtime detection mechanism.
Nevertheless align the implementation of the feature detection part
with the other features, but renaming the detection function, and
updating the FEAT_DETECTION code. Also update the documentation.
Change-Id: I2b86dfd1ad259c3bb99ab5186e2911ace454b54c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we only support access to the trace unit by system
registers (SYS_REG_TRACE) to be either unconditionally compiled in, or
to be not supported at all.
Add support for runtime detection (ENABLE_SYS_REG_TRACE_FOR_NS=2), by
adding is_feat_sys_reg_trace_supported(). That function considers both
build time settings and runtime information (if needed), and is used
before we access SYS_REG_TRACE related registers.
The FVP platform decided to compile in support unconditionally (=1),
even though this is an optional feature, so it is not available with the
FVP model's default command line.
Change that to the now supported dynamic option (=2), so the right
decision can be made by the code at runtime.
Change-Id: I450a574a4f6bd9fc269887037049c94c906f54b2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we only support FEAT_SPE to be either unconditionally
compiled in, or to be not supported at all.
Add support for runtime detection (ENABLE_SPE_FOR_NS=2), by splitting
is_armv8_2_feat_spe_present() into an ID register reading function and
a second function to report the support status. That function considers
both build time settings and runtime information (if needed), and is
used before we access SPE related registers.
Previously SPE was enabled unconditionally for all platforms, change
this now to the runtime detection version.
Change-Id: I830c094107ce6a398bf1f4aef7ffcb79d4f36552
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we hardcode the SPE functionality to be available on the
non-secure side only, by setting MDCR_EL2.E2PB accordingly.
This should be reflected in the feature selection symbol, so rename that
to ENABLE_SPE_FOR_NS, to make it clearer that SPE is not supported in
the secure world.
Change-Id: I3f9b48eab1a45d6ccfcbb9c90a11eeb66867ad9a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Arm v8.9 introduces FEAT_TCR2, adding extended translation control
registers. Support this, context switching TCR2_EL2 and disabling
traps so lower ELs can access the new registers.
Change the FVP platform to default to handling this as a dynamic option so
the right decision can be made by the code at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I297452acd8646d58bac64fc15e05b06a543e5148
BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).
BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.
Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
of a new warning when linking the bl*.elf in the form:
ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
These new warnings are enbaled by default to secure elf binaries:
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
Fix it in a similar way to what the Linux kernel does, see:
https://lore.kernel.org/all/20220810222442.2296651-1-ndesaulniers@google.com/
Following the reasoning there, we set "-z noexecstack" for all linkers
(although LLVM's LLD defaults to it) and optional add
--no-warn-rwx-segments since this a ld.bfd related.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Change-Id: I9430f5fa5036ca88da46cd3b945754d62616b617
Adopted RESET_TO_BL31_WITH_PARAMS functionality in RESET_TO_BL31
in the subsequent patches hence reverted this patch.
This reverts commit 25844ff728.
Change-Id: Ia0bfa22fc45754f15c82638662dde93f604992c3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Pauth is a generic Arm feature that can be enabled on any platform that
implements it. It only needs a platform specific key generation hook. As
such, the generic Pauth enablement can be included in the generic build.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Ibf32f79addab3515214594bb8d7168151b450f59
This change communicates the common and maximum page sizes to the
linker, which allows us to use the built-in constants that it provides
to deal with page alignments.
We only support 4K pages today so the fact these are fixed is not too
much of an issue, but we will need to revisit this if we ever support
other page sizes.
Change-Id: I3358c51e70df794025ddf25209ae0e2a96550b0e
Signed-off-by: Chris Kay <chris.kay@arm.com>
When PIE is enabled, the `-fpie` flag is passed to the compiler but not
to the preprocessor. This change ensures that both tools are aware of
when the image is position-independent when preprocessing, which impacts
some pre-defined preprocessor definitions.
Change-Id: I5208a591d60ee01312f6bf3dd7343abe6535ee61
Signed-off-by: Chris Kay <chris.kay@arm.com>
Enable SCXTNUM_ELx access for lower ELs in non-secure state.
Make realm context setup take this build flag into account but enable it
by default when RME is used.
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Change-Id: Ieb0186b2fdffad464bb9316fc3973772c9c28cd0
TF-A is quite strict with warnings and redundant code. This flag
furthers this so it would be useful to have it. Add it to W=2 as it sets
off a few platforms which require a somewhat involved fix.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Id52b3d477b4ada7dd69a36101ab22c575ab4ef19
TF-A is more strict with compiler warnings in comparison to other
projects (notably Linux) for security and -Wextra enables a lot of
desirable warnings. This patch enables -Wextra by default (from W=1
previously) and reorganises the warning levels so that they can useful
when enabled and not just a build failure. This will help us move
towards fixing the warnings that are too many to fix at once and
enabling all W={1, 2} warnings.
The warning levels get new meanings:
* W=1: warnings we want the generic build to include but are too time
consuming to fix at the moment. They re-enable warnings taken out for
generic builds.
* W=2: warnings we want the generic build to include but cannot be
enabled due to external libraries.
* W=3: warnings that are informative but not necessary and generally too
verbose and frequently ignored.
Quality expectations for new contributions mean that generally they
should have no warnings up to W=2. To allow code to be developed with
them in mind, -Werror is disabled when W=x is set. This way enabling
warnings will not just fail the build due to technicalities we have and
contributors will be able to actually see if they get any.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Ieb15ddd635d458a956a34b0f9d0ea2f81b9c0745
CTX_INCLUDE_EL2_REGS is used to save/restore EL2 registers and
it should be only used when there is SPMD or RME enabled.
Make CTX_INCLUDE_EL2_REGS an internal macro and remove
from documentation.
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Change-Id: I6a70edfd88163423ff0482de094601cf794246d6
In case of platform specific usage for both fiptool or certtool,
we need to ensure that the Makefile will use the correct rule
to generate the binary. Add the explicit call to the "all" rule.
Change-Id: I9724b63e01b3497daaedb9365c7d6a494aac9561
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
When updated to work with OpenSSL 3.0, the host tools lost their
compatibility with previous versions (1.x) of OpenSSL. This is
mainly due to the fact that 1.x APIs became deprecated in 3.0 and
therefore their use cause compiling errors. In addition, updating
for a newer version of OpenSSL meant improving the stability
against security threats. However, although version 1.1.1 is
now deprecated, it still receives security updates, so it would
not imply major security issues to keep compatibility with it too.
This patch adds backwards compatibility with OpenSSL 1.x versions
by adding back 1.x API code. It defines a macro USING_OPENSSL3,
which will select the appropriate OpenSSL API version depending on
the OpenSSL library path chosen (which is determined by the
already-existing OPENSSL_DIR variable).
In addition, cleanup items were packed in functions and moved to
the proper modules in order to make the code more maintainable and
legible.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I8deceb5e419edc73277792861882404790ccd33c
When a core is in debug recovery mode its caches are not invalidated
upon reset, so the L1 and L2 cache contents from before reset are
observable after reset. Similarly, debug recovery mode of DynamIQ
cluster ensures that contents of the shared L3 cache are also not
invalidated upon transition to On mode.
Booting cores in debug recovery mode means booting with caches disabled
and preserving the caches until a point where software can dump the
caches and retrieve their contents. TF-A however unconditionally cleans
and invalidates caches at multiple points during boot. This can lead to
memory corruption as well as loss of cache contents to be used for
debugging.
This patch fixes this by calling a platform hook before performing CMOs
in helper routines in cache_helpers.S. The platform hook plat_can_cmo is
an assembly routine which must not clobber x2 and x3, and avoid using
stack. The whole checking is conditional upon `CONDITIONAL_CMO` which
can be set at compile time.
Signed-off-by: Okash Khawaja <okash@google.com>
Change-Id: I172e999e4acd0f872c24056e647cc947ee54b193
Juan Pablo Conde
Karl Meakin
Raghu Krishnamurthy
Maksims Svecovs
Govindraj Raja
Boyan Karatotev
Jayanth Dodderi Chidanand
Shruti Gupta
Harrison Mutai
Andre Przywara
Manish Pandey
Sona Mathew
Yann Gautier
Varun Wadekar
Mark Brown
Wing Li
Arvind Ram Prakash
Marco Felsch
Manish V Badarkhe
Chris Kay
Yabin Cui
laurenw-arm
Lionel Debieve
Okash Khawaja