This patch:
1. removes a duplicate assertion to check that the only error
condition that can be returned while turning a cpu off is
PSCI_E_DENIED. Having this assertion after calling
psci_afflvl_off() is sufficient.
2. corrects some incorrect usage of 'its' vs 'it is'
3. removes some unwanted white spaces
Change-Id: Icf014e269b54f5be5ce0b9fbe6b41258e4ebf403
In fvp_affinst_on/suspend, the non-secure entrypoint is always
expected to lie in the DRAM. This check will not be valid if
non-secure code executes directly out of flash e.g. a baremetal
test. This patch removes this check.
Change-Id: I0436e1138fc394aae8ff1ea59ebe38b46a440b61
This patch removes the duplicate declaration of psci_cpu_on in psci.h
and moves the constants for the system level implementation of the
generic timer from arch_helpers.h to arch.h. All other architectural
constants are defined in arch.h so there is no need to add them to
arch_helpers.h
Change-Id: Ia8ad3f91854f7e57fce31873773eede55c384ff1
In the previous psci implementation, the psci_afflvl_power_on_finish()
function would run into an error condition if the value of the context
id parameter in the cpu_on and cpu_suspend psci calls was != 0. The
parameter was being restored as the return value of the affinity level
0 finisher function. A non zero context id would be treated as an
error condition. This would prevent successful wake up of the cpu from
a power down state. Also, the contents of the general purpose
registers were not being cleared upon return to the non-secure world
after a cpu power up. This could potentially allow the non-secure
world to view secure data.
This patch ensures that all general purpose registers are set to ~0
prior to the final eret that drops the execution to the non-secure
world. The context id is used to initialize the general purpose
register x0 prior to re-entry into the non-secure world and is no
longer restored as a function return value. A platform helper
(platform_get_stack()) has been introduced to facilitate this change.
Change-Id: I2454911ffd75705d6aa8609a5d250d9b26fa097c
This patch fixes the following constant values in the psci.h:
1. The affinity level shift value in the power_state parameter of the
cpu_suspend psci call. The previous value was preventing shutdown
of the affinity level 1.
2. The values used for affinity state constants (ON, OFF,
ON_PENDING). They did not match the values expected to be returned
by the affinity_info psci api as mentioned in the spec.
3. The state id shift value in the power_state parameter of the
cpu_suspend psci call.
Change-Id: I62ed5eb0e9640b4aa97b93923d6630e6b877a097
The FVP specific code that gets called after a cpu has been physically
powered on after having been turned off or suspended earlier does not
clear the PWRC.PWKUPR.WEN bit. Not doing so causes problems if: a cpu
is suspended, woken from suspend, powered down through a cpu_off call
& receives a spurious interrupt. Since the WEN bit is not cleared
after the cpu woke up from suspend, the spurious wakeup will power the
cpu on. Since the cpu_off call clears the jump address in the mailbox
this spurious wakeup will cause the cpu to crash.
This patch fixes this issue by clearing the WEN bit whenever a cpu is
powered up.
Change-Id: Ic91f5dffe1ed01d76bc7fc807acf0ecd3e38ce5b
The runtime exception handling assembler code used magic numbers for
saving and restoring the general purpose register context on stack
memory. The memory is interpreted as a 'gp_regs' structure and the
magic numbers are offsets to members of this structure. This patch
replaces the magic number offsets with constants. It also adds compile
time assertions to prevent an incorrect assembler view of this
structure.
Change-Id: Ibf125bfdd62ba3a33e58c5f1d71f8c229720781c
- Add instructions for contributing to ARM Trusted Firmware.
- Update copyright text in all files to acknowledge contributors.
Change-Id: I9311aac81b00c6c167d2f8c889aea403b84450e5
This patch updates the user guide section about the memory layout.
- Explain the verifications that the linker scripts does on the
global memory layout.
- Refer to the new linker symbols.
- Describe the linker symbols exported to the trusted firmware code.
Change-Id: I033ab2b867e8b9776deb4185b9986bcb8218f286
This patch makes sure the C runtime environment is properly
initialised before executing any C code.
- Zero-initialise NOBITS sections (e.g. the bss section).
- Relocate BL1 data from ROM to RAM.
Change-Id: I0da81b417b2f0d1f7ef667cc5131b1e47e22571f
- Check at link-time that bootloader images will fit in memory
at run time and that they won't overlap each other.
- Remove text and rodata orphan sections.
- Define new linker symbols to remove the need for platform setup
code to know the order of sections.
- Reduce the size of the raw binary images by cutting some sections
out of the disk image and allocating them at load time, whenever
possible.
- Rework alignment constraints on sections.
- Remove unused linker symbols.
- Homogenize linker symbols names across all BLs.
- Add some comments in the linker scripts.
Change-Id: I47a328af0ccc7c8ab47fcc0dc6e7dd26160610b9
A single binary can be compiled using a command such as:
make CROSS_COMPILE=aarch64-none-elf- bl1
Also make use of brackets consistent in the Makefile.
Change-Id: I2180fdb473411ef7cffe39670a7b2de82def812e
- Large RAM-disks may have trouble starting with 2GB of memory.
- Increase from 2GB to 4GB in FDT.
Change-Id: I12c1b8e5db41114b88c69c48621cb21247a6a6a7
On FVP platforms, for now it is assumed that the normal-world
bootloader is already sitting in its final memory location.
Therefore, BL2 doesn't need to load it and so it doesn't need
to know the extents of the non-trusted DRAM.
Change-Id: I33177ab43ca242edc8958f2fa8d994e7cf3e0843
Also, don't invalidate the TLBs in disable_mmu() function, it's better
to do it in enable_mmu() function just before actually enabling the
MMU.
Change-Id: Ib32d6660019b0b2c17254156aad4be67ab4970e1
Any asynchronous exception caused by the firmware should be handled
in the firmware itself. For this reason, unmask SError exceptions
(and Debug ones as well) on all boot paths. Also route external
abort and SError interrupts to EL3, otherwise they will target EL1.
Change-Id: I9c191d2d0dcfef85f265641c8460dfbb4d112092
Global and static variables are expected to be initialised to zero
by default. This is specified by the C99 standard. This patch
removes some unnecessary initialisations of such variables.
It fixes a compilation warning at the same time:
plat/fvp/bl31_plat_setup.c:82:3: warning: missing braces around
initializer [-Wmissing-braces]
section("tzfw_coherent_mem"))) = {0};
^
plat/fvp/bl31_plat_setup.c:82:3: warning: (near initialization for
‘ns_entry_info[0]’) [-Wmissing-braces]
Note that GCC should not have emitted this warning message in the
first place. The C Standard permits braces to be elided around
subaggregate initializers. See this GCC bug report:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Change-Id: I13cb0c344feb9803bca8819f976377741fa6bc35
blx_plat_arch_setup() should only perform platform-specific
architectural setup, e.g. enabling the MMU. This patch moves
generic architectural setup code out of blx_plat_arch_setup().
Change-Id: I4ccf56b8c4a2fa84909817779a2d97a14aaafab6
- The Foundation FVP is a cut down version of the Base FVP and as
such lacks some components.
- Three FDTs are provided.
fvp-foundation-gicv2legacy-psci:
Use this when setting the Foundation FVP to use GICv2. In this
mode the GIC is located at the VE location, as described in the
VE platform memory map.
fvp-foundation-gicv3-psci :
Use this when setting the Foundation FVP to use GICv3. In this
mode the GIC is located at the Base location, as described in the
Base platform memory map.
fvp-foundation-gicv2-psci :
Use this when setting the Foundation FVP to use GICv3, but Linux
is expected to use GICv2 emulation mode. In this mode the GIC is
located at the Base location, but the GICv3 is used in GICv2
emulation mode.
Change-Id: I9d69bcef35c64cc8f16550efe077f578e55aaae5
Achin Gupta
Dan Handley
Sandrine Bailleux
James Morrissey
Harry Liebel