Instead of using dt_get_ddr_size() and withdrawing the secure and shared
memory areas, use stm32mp_get_ddr_ns_size() function.
Change-Id: I5608fd7873589ea0e1262ba7d2ee3e52b53d9a7d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
DTB and BL32 area should not be set as executable in MMU during BL2
execution, hence set those areas as MT_RO_DATA.
Change-Id: I87c47a1e7fda761e541ec98a5b294588384d31db
Signed-off-by: Yann Gautier <yann.gautier@st.com>
A speculative accesses to DDR could be done whereas it was not reachable
and could lead to bus stall.
To correct this the dynamic mapping in MMU is used.
A first mapping is done for DDR tests with MT_NON_CACHEABLE attribute,
once DDR access is setup. It is then unmapped and a new mapping DDR is done
with cacheable attribute (through MT_MEMORY) to speed-up BL33 (or OP-TEE)
load.
The disabling of cache during DDR tests is also removed, as now useless.
A call to new functions stm32mp_{,un}map_ddr_non_cacheable() is done
instead.
PLAT_XLAT_TABLES_DYNAMIC is activated globally as used in BL2 and BL32.
BL33 max size is also updated to take into account the secure and shared
memory areas. Those are used in OP-TEE case.
Change-Id: I22c48b4a48255ee264991c34ecbb15bfe87e67c3
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This function gets the DDR size from DT, and withdraws (if defined) the
sizes of secure DDR and shared memory areas.
This function also checks DT values fits the default DDR range.
This non-secure memory is available for BL33 and non-secure OS.
Change-Id: I162ae5e990a0f9b6b7d07e539de029f1d61a391b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Fix below warnings appeared in porting-guide.rst
WARNING: Title underline too short.
Change-Id: Ibc0eba0da72a53a5f9b61c49a8bf7a10b17bc3b8
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch increases MAX_MMAP_REGIONS to 30 to accommodate the
additional dynamic memory mapped region, during Trusty boot.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I461186a3aff5040f14715b87502fc5f1db3bea6e
This patch provides support for measured boot by adding calculation
of BL2 image hash in BL1 and writing these data in TB_FW_CONFIG DTB.
Change-Id: Ic074a7ed19b14956719c271c805b35d147b7cec1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fixed below 'tautological-constant-compare' error when building the source
code with latest clang compiler <clang version 11.0.0>.
plat/common/plat_psci_common.c:36:2:
error: converting the result of '<<' to a boolean always evaluates
to true [-Werror,-Wtautological-constant-compare]
PMF_STORE_ENABLE)
^
include/lib/pmf/pmf.h:28:29: note: expanded from macro 'PMF_STORE_ENABLE'
PMF_STORE_ENABLE (1 << 0)
This error is observed beacuse of CASSERT placed in
"PMF_DEFINE_CAPTURE_TIMESTAMP" which do below stuff:
CASSERT(_flags, select_proper_config);
where _flags = PMF_STORE_ENABLE (1 << 0) which always results true.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ifa82ea202496a23fdf1d27ea1798d1f1b583a021
In the context of enabling initramfs this change makes
the kernel arguments compatible with the initramfs requirements
Change-Id: Ifa955a5790ae1398fd8ad9ca1c8272f019c121a6
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
This patch increases the maximum timeout value for SE operation
completion to 1 second. This takes care of some corner cases where
an operation might take more time than the previous timeout value
of 100ms.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I0012448ba372a8bb0e156df7dfe49d7de6d21a68
When SPD=spmd and SPMD_SPM_AT_SEL2=0, that is SPMC sits at S-EL1
then there is no need for TF-A to load secure partitions individually.
In this configuration, SPMC handles secure partition loading at
S-EL1/EL0 levels.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I06a0d88a4811274a8c347ce57b56bb5f64e345df
This issue was found with cppcheck in our downstream code:
[drivers/st/io/io_stm32image.c:234] -> [drivers/st/io/io_stm32image.c:244]:
(warning) Either the condition 'buffer!=0U' is redundant or there is
possible null pointer dereference: local_buffer.
Change-Id: Ieb615b7e485dc93bbeeed4cd8bf845eb84c14ac9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This warning was issued by cppcheck in our downstream code:
[plat/st/common/stm32mp_dt.c:629] -> [plat/st/common/stm32mp_dt.c:634]:
(warning) Identical condition 'node<0', second condition is always false
The second test has to check variable pwr_regulators_node.
Change-Id: I4a20c4a3ac0ef0639c2df36309d90a61c02b511f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The variable is wrongly set to 0L, whereas it is an unsigned int, it should
then be 0U.
Change-Id: I0b164c0ea598ec8a503f1693da2f3789f59da238
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Correct the following sparse warnings:
plat/st/common/stm32mp_dt.c:103:5: warning:
symbol 'fdt_get_node_parent_address_cells' was not declared.
Should it be static?
plat/st/common/stm32mp_dt.c:123:5: warning:
symbol 'fdt_get_node_parent_size_cells' was not declared.
Should it be static?
As those 2 functions are only used by assert(), put them under
ENABLE_ASSERTIONS flag.
Change-Id: Iad721f12128df83a3de3f53e7920a9c1dce64c56
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Correct the following warning given by sparse tool:
include/drivers/raw_nand.h:158:3: warning:
symbol '__packed' was not declared. Should it be static?
Change-Id: I03bd9a8aee5cdc5212ce5225be8033f1a6e92bd9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Sparse issue:
drivers/st/spi/stm32_qspi.c:445:5:
warning: symbol 'stm32_qspi_init' was not declared. Should it be static?
Cppcheck issue:
[drivers/st/spi/stm32_qspi.c:175] -> [drivers/st/spi/stm32_qspi.c:187]:
(style) Variable 'len' is reassigned a value before the old one has been
used.
[drivers/st/spi/stm32_qspi.c:178]:
(style) The scope of the variable 'timeout' can be reduced.
Change-Id: I575fb50766355a6717cbd193fc4a80ff1923014c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
1. This removes hardcoded iomux/clk/addr configuration for debug uart,
provides possibility (as a workaround, till that information isn't
provided via DT) to set this configuration during compile time via
IMX_DEBUG_UART build flag.
Also for Colibri i.MX8QXP different pinmux configuration is applied
for UART3, FLEXCAN2_RX/TX pads are muxed to ADMA_UART3_RX/TX.
2. Having DEBUG_CONSOLE enabled without enabling DEBUG_CONSOLE_A35
doesn't make sense (since UART pinmux/clock configuration is applied
for UART only when DEBUG_CONSOLE_A35 is enabled. Check similar commit
for i.MX8QM 98a69dfd4a("plat: imx: imx8qm: apply clk/pinmux
configuration for DEBUG_CONSOLE")).
Usage:
$ make PLAT=imx8qx IMX_DEBUG_UART=3 DEBUG_CONSOLE=1 bl31
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Change-Id: I5d04939b2e8ee1a5f4b2f3c6241977d3c6e91760
* changes:
Tegra194: move cluster and CPU counter to header file.
Tegra: gicv2: initialize target masks
spd: tlkd: support new TLK SMCs for RPMB service
Tegra210: trigger CPU0 hotplug power on using FC
Tegra: memctrl: cleanup streamid override registers
Tegra: memctrl_v2: remove support to secure TZSRAM
Tegra: include platform headers from individual makefiles
Tegra210: rename ENABLE_WDT_LEGACY_FIQ_HANDLING macro
Tegra194: SiP function ID to read SMMU_PER registers
Tegra: memctrl: map video memory as uncached
Tegra: remove support for USE_COHERENT_MEM
Tegra: remove circular dependency with common_def.h
Tegra: include missing stdbool.h
Tegra: remove support for SEPARATE_CODE_AND_RODATA=0
The manifest binding document defines the expected properties and their formats
to represent a partition manifest in device tree.
Change-Id: I5eb250c7b89e0d828e1fcfce32b121e4081879ec
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
The base address for both the GPIO and the clock unit of the H6 memory map
have been typo-ed. Fix them to match the Linux DT and the manual.
The H6 code use neither of them, so this doesn't change or fix anything
in the real world, but should be corrected anyway.
The issue was found and reported by Github user "armlabs".
Change-Id: Ic6fdfb732ce1cfc54cbb927718035624a06a9e08
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Commit e9e19fb2fe accidentally removed the
GIC init routine required to initialze the distributor on system resume.
This patch fixes this anomaly and initializes the distributor on system
resume.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I3fdc694404faa509952f2d90b1f16541165e583e
MISRA rules request that the cluster and CPU counter be unsigned
values and have a suffix 'U'. If the define located in the makefile,
this cannot be done.
This patch moves the PLATFORM_CLUSTER_COUNT and PLATFORM_MAX_CPUS_PER_CLUSTER
macros to tegra_def.h as a result.
Change-Id: I9ef0beb29485729de204b4ffbb5241b039690e5a
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
This patch initializes the target masks in the GICv2 driver
data, for all PEs. This will allow platforms to set the PE
target for SPIs.
Change-Id: I7bf2ad79c04c2555ab310acba17823fb157327a3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to handle following TLK SMCs:
{TLK_SET_BL_VERSION, TLK_LOCK_BL_INTERFACE, TLK_BL_RPMB_SERVICE}
These SMCs need to be supported in ATF in order to forward them to
TLK. Otherwise, these functionalities won't work.
Brief:
TLK_SET_BL_VERSION: This SMC is issued by the bootloader to supply its
version to TLK. TLK can use this to prevent rollback attacks.
TLK_LOCK_BL_INTERFACE: This SMC is issued by bootloader before handing off
execution to the OS. This allows preventing sensitive SMCs being used
by the OS.
TLK_BL_RPMB_SERVICE: bootloader issues this SMC to sign or verify RPMB
frames.
Tested by: Tests TLK can receive the new SMCs issued by bootloader
Change-Id: I57c2d189a5f7a77cea26c3f8921866f2a6f0f944
Signed-off-by: Mustafa Yigit Bilgen <mbilgen@nvidia.com>
Hotplug poweron is not working for boot CPU as it's being
triggerred using PMC and not with Flow Controller. This is
happening because "cpu_powergate_mask" is only getting set
for non-boot CPU's as the boot CPU's first bootup follows
different code path. The patch is marking a CPU as ON within
"cpu_powergate_mask" when turning its power domain on
during power on. This will ensure only first bootup on all
CPU's is using PMC and subsequent hotplug poweron will be
using Flow Controller.
Change-Id: Ie9e86e6f9a777d41508a93d2ce286f31307932c2
Signed-off-by: sumitg <sumitg@nvidia.com>
Streamid override registers are passed to memctrl to program bypass
streamid for all the registers. There is no reason to bypass SMMU
for any of the client so need to remove register list and do not
set streamid_override_cfg.
Some Tegra186 platforms don't boot due to SDMMC failure so keep SDMMC
bypass as of now. Will revisit once these issues are fixed.
Change-Id: I3f67e2a0e1b53160e2218f3acace7da45532f934
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch removes support to secure the on-chip TZSRAM memory for
Tegra186 and Tegra194 platforms as the previous bootloader does that
for them.
Change-Id: I50c7b7f9694285fe31135ada09baed1cfedaaf07
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch modifies PLAT_INCLUDES to include individual Tegra SoC
headers from the platform's makefile.
Change-Id: If5248667f4e58ac18727d37a18fbba8e53f2d7b5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch renames 'ENABLE_WDT_LEGACY_FIQ_HANDLING' macro to
'ENABLE_TEGRA_WDT_LEGACY_FIQ_HANDLING', to indicate that this
is a Tegra feature.
Change-Id: I5c4431e662223ee80efbfd5ec2513f8b1cadfc50
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch introduces SiP function ID, 0xC200FF00, to read SMMU_PER
error records from all supported SMMU blocks.
The register values are passed over to the client via CPU registers
X1 - X3, where
X1 = SMMU_PER[instance #1] | SMMU_PER[instance #0]
X2 = SMMU_PER[instance #3] | SMMU_PER[instance #2]
X3 = SMMU_PER[instance #5] | SMMU_PER[instance #4]
Change-Id: Id56263f558838ad05f6021f8432e618e99e190fc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Memmap video memory as uncached normal memory by adding flag
'MT_NON_CACHEABLE' in mmap_add_dynamic_region().
This improves the time taken for clearing the non-overlapping video
memory:
test conditions: 32MB memory size, EMC running at 1866MHz, t186
1) without MT_NON_CACHEABLE: 30ms ~ 40ms
<3>[ 133.852885] vpr-heap: update vpr base to 0x00000000c6000000, size=e000000
<3>[ 133.860471] _tegra_set_vpr_params[120]: begin
<3>[ 133.896481] _tegra_set_vpr_params[123]: end
<3>[ 133.908944] vpr-heap: update vpr base to 0x00000000c6000000, size=c000000
<3>[ 133.916397] _tegra_set_vpr_params[120]: begin
<3>[ 133.956369] _tegra_set_vpr_params[123]: end
<3>[ 133.970394] vpr-heap: update vpr base to 0x00000000c6000000, size=a000000
<3>[ 133.977934] _tegra_set_vpr_params[120]: begin
<3>[ 134.013874] _tegra_set_vpr_params[123]: end
<3>[ 134.025666] vpr-heap: update vpr base to 0x00000000c6000000, size=8000000
<3>[ 134.033512] _tegra_set_vpr_params[120]: begin
<3>[ 134.065996] _tegra_set_vpr_params[123]: end
<3>[ 134.075465] vpr-heap: update vpr base to 0x00000000c6000000, size=6000000
<3>[ 134.082923] _tegra_set_vpr_params[120]: begin
<3>[ 134.113119] _tegra_set_vpr_params[123]: end
<3>[ 134.123448] vpr-heap: update vpr base to 0x00000000c6000000, size=4000000
<3>[ 134.130790] _tegra_set_vpr_params[120]: begin
<3>[ 134.162523] _tegra_set_vpr_params[123]: end
<3>[ 134.172413] vpr-heap: update vpr base to 0x00000000c6000000, size=2000000
<3>[ 134.179772] _tegra_set_vpr_params[120]: begin
<3>[ 134.209142] _tegra_set_vpr_params[123]: end
2) with MT_NON_CACHEABLE: 10ms ~ 18ms
<3>[ 102.108702] vpr-heap: update vpr base to 0x00000000c6000000, size=e000000
<3>[ 102.116296] _tegra_set_vpr_params[120]: begin
<3>[ 102.134272] _tegra_set_vpr_params[123]: end
<3>[ 102.145839] vpr-heap: update vpr base to 0x00000000c6000000, size=c000000
<3>[ 102.153226] _tegra_set_vpr_params[120]: begin
<3>[ 102.164201] _tegra_set_vpr_params[123]: end
<3>[ 102.172275] vpr-heap: update vpr base to 0x00000000c6000000, size=a000000
<3>[ 102.179638] _tegra_set_vpr_params[120]: begin
<3>[ 102.190342] _tegra_set_vpr_params[123]: end
<3>[ 102.197524] vpr-heap: update vpr base to 0x00000000c6000000, size=8000000
<3>[ 102.205085] _tegra_set_vpr_params[120]: begin
<3>[ 102.216112] _tegra_set_vpr_params[123]: end
<3>[ 102.224080] vpr-heap: update vpr base to 0x00000000c6000000, size=6000000
<3>[ 102.231387] _tegra_set_vpr_params[120]: begin
<3>[ 102.241775] _tegra_set_vpr_params[123]: end
<3>[ 102.248825] vpr-heap: update vpr base to 0x00000000c6000000, size=4000000
<3>[ 102.256069] _tegra_set_vpr_params[120]: begin
<3>[ 102.266368] _tegra_set_vpr_params[123]: end
<3>[ 102.273400] vpr-heap: update vpr base to 0x00000000c6000000, size=2000000
<3>[ 102.280672] _tegra_set_vpr_params[120]: begin
<3>[ 102.290929] _tegra_set_vpr_params[123]: end
Change-Id: I5f604064ce7b8b73ea9ad5860156ae5e2c6cc42a
Signed-off-by: Ken Chang <kenc@nvidia.com>
This patch removes the support for 'USE_COHERENT_MEM' as
Tegra platforms no longer support the feature.
Change-Id: If1c80fc4e5974412572b3bc1fdf9e70b1ee5d4ec
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
Mark Dykes
Yann Gautier
Olivier Deprez
Sandrine Bailleux
Manish V Badarkhe
Varun Wadekar
Alexei Fedorov
Manish Pandey
Abdellatif El Khlifi
Igor Opaniuk
Louis Mayencourt
Andre Przywara
Anthony Zhou
Mustafa Yigit Bilgen
sumitg
Pritesh Raithatha
Ken Chang
Kalyani Chidambaram