This patch removes usage of bakery_locks from the FIQ handler, as it
creates unnecessary dependency whenever the watchdog timer interrupt
fires. All operations inside the interrupt handler are 'reads', so
no need for serialization.
Change-Id: I3f675e610e4dabc5b1435fdd24bc28e424f5a8e4
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Tegra210B01 SoCs support atomic context save for the two SE
hardware engines. Tegra210 SoCs have support for only one SE
engine and support a software based save/restore mechanism
instead.
This patch updates the SE driver to make this change.
Change-Id: Ia5e5ed75d0fe011f17809684bbc2ed2338925946
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Update the list to include PMC registers that the NS world cannot
access even with smc calls.
Change-Id: I588179b56ebc0c29200b55e6d61535fd3a7a3b7e
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>
This patch resets the macros to update the CPUACTLR_ELx to make
them generic for all exception levels.
Change-Id: I33e9b860efb543934b654a2f5d775135df7f1aa6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The denver_enable_dco and denver_disable_dco use register X3 to store
the return address. But X3 gets over-written by other functions,
downstream.
This patch stores the return address to X18 instead, to fix this
anomaly.
Change-Id: Ic40bfc1d9abaa7b90348843b9ecd09521bb4ee7b
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
Update qemu documentation with instructions to boot using FIP image.
Also, add option to build TF-A with TBBR and firmware encryption
enabled.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: Ib3af485d413cd595352034c82c2268d7f4cb120a
ARM has a weak memory ordering model. This means that without
explicit barriers, memory accesses can be observed differently
than program order. In this case, the cache invalidate instruction
can be observed after the subsequent read to address.
To solve this, a DMB instruction is required between the cache
invalidate and the read. This ensures that the cache invalidate
completes before all memory accesses in program order after the DMB.
This patch updates the 'read_cache_op' macro to issue a DMB after
the cache invalidate instruction to fix this anomaly.
Change-Id: Iac9a90d228c57ba8bcdca7e409ea6719546ab441
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
In CPU resume function, CPU suspend count was printed instead of CPU
resume count.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I0c081dc03a4ccfb2129687f690667c5ceed00a5f
This patch provides a fix for incorrect crash dump data for
lower EL when TF-A is built with HANDLE_EA_EL3_FIRST=1 option
which enables routing of External Aborts and SErrors to EL3.
Change-Id: I9d5e6775e6aad21db5b78362da6c3a3d897df977
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Currently, the ROM region is needlessly too large.
The on-chip SRAM region of the next SoC will start from 0x04000000,
and this will cause the region overlap.
Mapping 0x04000000 for the ROM is enough.
Change-Id: I85ce0bb1120ebff2e3bc7fd13dc0fd15dfff5ff6
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Enable encryption IO layer to be stacked above FIP IO layer for optional
encryption of Bl31 and BL32 images in case ENCRYPT_BL31 or ENCRYPT_BL32
build flag is set.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I24cba64728861e833abffc3d5d9807599c49feb6
Following build flags have been added to support optional firmware
encryption:
- FW_ENC_STATUS: Top level firmware's encryption numeric flag, values:
0: Encryption is done with Secret Symmetric Key (SSK) which is
common for a class of devices.
1: Encryption is done with Binding Secret Symmetric Key (BSSK) which
is unique per device.
- ENC_KEY: A 32-byte (256-bit) symmetric key in hex string format. It
could be SSK or BSSK depending on FW_ENC_STATUS flag.
- ENC_NONCE: A 12-byte (96-bit) encryption nonce or Initialization Vector
(IV) in hex string format.
- ENCRYPT_BL31: Binary flag to enable encryption of BL31 firmware.
- ENCRYPT_BL32: Binary flag to enable encryption of Secure BL32 payload.
Similar flags can be added to encrypt other firmwares as well depending
on use-cases.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I94374d6830ad5908df557f63823e58383d8ad670
Add firmware authenticated encryption tool which utilizes OpenSSL
library to encrypt firmwares using a key provided via cmdline. Currently
this tool supports AES-GCM as an authenticated encryption algorithm.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I60e296af1b98f1912a19d5f91066be7ea85836e4
TBBR spec advocates for optional encryption of firmwares (see optional
requirement: R060_TBBR_FUNCTION). So add an IO abstaction layer to
support firmware decryption that can be stacked above any underlying IO/
packaging layer like FIP etc. It aims to provide a framework to load any
encrypted IO payload.
Also, add plat_get_enc_key_info() to be implemented in a platform
specific manner as handling of encryption key may vary from one platform
to another.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I9892e0ddf00ebecb8981301dbfa41ea23e078b03
Add framework for autheticated decryption of data. Currently this
patch optionally imports mbedtls library as a backend if build option
"DECRYPTION_SUPPORT = aes_gcm" is set to perform authenticated decryption
using AES-GCM algorithm.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I2966f0e79033151012bf4ffc66f484cd949e7271
Some boards (f.e. Verdin i.MX8M Mini) use different UART base address
for serial debug output, so make this value configurable (as a
build option).
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Change-Id: I988492ccecbc3f64a5153b381c4a97b8a0181f52
The cpu index was wrongly checked causing it to assert always.
Since this code path is exercised only during TF test "NODE_HW_STAT",
which queries Power state from SCP, this bug was not detected earlier.
Change-Id: Ia25cef4c0aa23ed08092df39134937a2601c21ac
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Since commit ac71344e9e we have the UART base address in the generic
console_t structure. For most platforms the platform-specific struct
console is gone, so we *must* use the embedded base address, since there
is no storage behind the generic console_t anymore.
Replace the usage of CONSOLE_T_DRVDATA with CONSOLE_T_BASE to fix this.
Change-Id: I6d2ab0bc2c845c71f98b9dd64d89eef3252f4591
Reported-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Commit ac71344e9e moved the base address
for the MMIO aperture of the console inside the console_t struct. As
a result, the driver should now save the MMIO base address to console_t
at offset marked by the CONSOLE_T_BASE macro.
This patch updates the SPE console driver to use the CONSOLE_T_BASE macro
to save/access the MMIO base address.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I42afc2608372687832932269108ed642f218fd40
This change is to add ethernet and voltage regulator nodes into
a5ds devicetree.
Change-Id: If9ed67040d54e76af1813c9f99835f51f617e9df
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
This patch implements loading of Secure Partition packages using
existing framework of loading other bl images.
The current framework uses a statically defined array to store all the
possible image types and at run time generates a link list and traverse
through it to load different images.
To load SPs, a new array of fixed size is introduced which will be
dynamically populated based on number of SPs available in the system
and it will be appended to the loadable images list.
Change-Id: I8309f63595f2a71b28a73b922d20ccba9c4f6ae4
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Added SPMD_SPM_AT_SEL2 build command line parameter.
Set to 1 to run SPM at S-EL2.
Set to 0 to run SPM at S-EL1 (pre-v8.4 or S-EL2 is disabled).
Removed runtime EL from SPM core manifest.
Change-Id: Icb4f5ea4c800f266880db1d410d63fe27a1171c0
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Renamed the structure according to a SPMD refactoring
introduced in <c585d07aa> since this structure is used
to service both EL1 and EL2 as opposed to serving only EL1.
Change-Id: I23b7c089e53f617157a4b4e6443acce50d85c3b5
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
This patch adds EL2 registers that are supported up to ARMv8.6.
ARM_ARCH_MINOR has to specified to enable save/restore routine.
Note: Following registers are still not covered in save/restore.
* AMEVCNTVOFF0<n>_EL2
* AMEVCNTVOFF1<n>_EL2
* ICH_AP0R<n>_EL2
* ICH_AP1R<n>_EL2
* ICH_LR<n>_EL2
Change-Id: I4813f3243e56e21cb297b31ef549a4b38d4876e1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Add load address and UUID in fw config dts for Cactus and Ivy which are
example SP's in tf-test repository.
For prototype purpose these information is added manually but later on
it will be updated at compile time from SP layout file and SP manifests
provided by platform.
Change-Id: I41f485e0245d882c7b514bad41fae34036597ce4
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Use the firmware configuration framework to retrieve information about
Secure Partitions to facilitate loading them into memory.
To load a SP image we need UUID look-up into FIP and the load address
where it needs to be loaded in memory.
This patch introduces a SP populator function which gets UUID and load
address from firmware config device tree and updates its C data
structure.
Change-Id: I17faec41803df9a76712dcc8b67cadb1c9daf8cd
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
On Hikey960 if outputs GPIO176 low level, it can tell PMIC to power off
the whole board. To avoid resetting the board and stay off, it also
requires the SW2201's three switches 1/2/3 need to be all set to 0.
Since current code doesn't contain complete GPIO modules and misses to
support GPIO176. This patch adds all known GPIO modules and initialize
GPIO in BL31, and adds system power off callback to use GPIO176 for PMIC
power off operation.
Change-Id: Ia88859b8b7c87c061420ef75f0de3e2768667bb0
Signed-off-by: Leo Yan <leo.yan@linaro.org>
In commit 516beb585c ("TBB: apply TBBR naming
convention to certificates and extensions"), some of the variables used in the
TBBR chain of trust got renamed but the documentation did not get properly
updated everywhere to reflect these changes.
Change-Id: Ie8e2146882c2d3538c5b8c968d1bdaf5ea2a6e53
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
NOTE: Not all EL-2 system registers are saved/restored.
This subset includes registers recognized by ARMv8.0
Change-Id: I9993c7d78d8f5f8e72d1c6c8d6fd871283aa3ce0
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
aarch32 CPUs speculatively execute instructions following a
ERET as if it was not a jump instruction. This could lead to
cache-based side channel vulnerabilities. The software fix is
to place barrier instructions following ERET.
The counterpart patch for aarch64 is merged:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=f461fe346b728d0e88142fd7b8f2816415af18bc
Change-Id: I2aa3105bee0b92238f389830b3a3b8650f33af3d
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
* changes:
board/rddaniel: intialize tzc400 controllers
plat/arm/tzc: add support to configure multiple tzc400
plat/arm: allow boards to specify second DRAM Base address
plat/arm: allow boards to define PLAT_ARM_TZC_FILTERS
Varun Wadekar
Harvey Hsieh
kalyani chidambaram
Mark Dykes
Sandrine Bailleux
Sumit Garg
Manish Pandey
Madhukar Pappireddy
Alexei Fedorov
Masahiro Yamada
Olivier Deprez
Igor Opaniuk
Andre Przywara
Vishnu Banavath
Max Shvetsov
Leo Yan