Currently for Armv7 plaforms the quotient calculated in pl011
uart init code is moved to register r1.
This patch moves the quotient to register r2 as done for other
platforms in the udiv instruction. Value of register r2 is then
used to calculate the values for IBRD and FBRD register
Change-Id: Ie6622f9f0e6d634378b471df5d02823b492c8a24
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>
Change-Id: I84f8a99be2dcdf7c51fbecdb324df8e2f32cc855
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
In the SD Specification, Power Up Diagram of Card figure, the Timeout
value for initialization process (ACMD41 command retries) is 1 second.
Align to match MMC cards (in mmc_send_op_cond()) and Linux kernel code,
and set the delay between ACMD41 command retries to 10ms.
Change-Id: I2e07cb9944e7d7b72f2d4b13e0505e6751458091
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This patch provides declaration and definition of new GICv3 driver
API: gicv3_rdistif_probe().This function delegates the responsibility
of discovering the corresponding Redistributor base frame to each CPU
itself. It is a modified version of gicv3_rdistif_base_addrs_probe()
and is executed by each CPU in the platform unlike the previous
approach in which only the Primary CPU did the discovery of all the
Redistributor frames for every CPU.
The flush operations as part of gicv3_driver_init() function are
made necessary even for platforms with WARMBOOT_ENABLE_DCACHE_EARLY
because the GICv3 driver data structure contents are accessed by CPU
with D-Cache turned off during power down operations.
Change-Id: I1833e81d3974b32a3e4a3df4766a33d070982268
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This commit adds authentication binary support for STM32MP1.
It prints the bootrom authentication result if signed
image is used and authenticates the next loaded STM32 images.
It also enables the dynamic translation table support
(PLAT_XLAT_TABLES_DYNAMIC) to use bootrom services.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iba706519e0dc6b6fae1f3dd498383351f0f75f51
This BSEC service is a platform specific service. Implementation
moved to the platform part.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I1f70ed48a446860498ed111acce01187568538c9
The driver manages the HASH processor IP on STM32MP1
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I3b67c80c16d819f86b951dae29a6c465e51ad585
The block size of some storage device is 4096-byte long, such as UFS. But
PARTITION_BLOCK_SIZE is defined as 512-byte long. So replace it by
PLAT_PARTITION_BLOCK_SIZE. Make it configurable in platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Change-Id: Iada05f7c646d0a0f2c0d3b8545540b3cb7153de3
The registers location for the SHA DMA driver is not unique for the
different platforms. Move the mapping out of the driver and into the
platform-specific header.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ice64637844a3cb384b01e466cb8c1cea5f764129
To allow sharing the driver between the RPi3 and RPi4, move the random
number generator driver into the generic driver directory.
Change-Id: Iae94d7cb22c6bce3af9bff709d76d4caf87b14d1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
To allow sharing the driver between the RPi3 and RPi4, move the mailbox
driver into the generic driver directory.
Change-Id: I463e49acf82b02bf004f3d56482b7791f3020bc0
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This patch fixes GICv3 driver bug which causes assertion
when full range of SPI INTIDs 32-1019 is supported in
GICv3 implementation.
Change-Id: Ib6da4b6eea868cff271cb32c7c7570bf5547ab47
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Support for PKCS#1 v1.5 was deprecated in SHA 1001202 and fully removed
in SHA fe199e3, however, cert_tool is still able to generate
certificates in that form. This patch fully removes the ability for
cert_tool to generate these certificates.
Additionally, this patch also fixes a bug where the issuing certificate
was a RSA and the issued certificate was EcDSA. In this case, the issued
certificate would be signed using PKCS#1 v1.5 instead of RSAPSS per
PKCS#1 v2.1, preventing TF-A from verifying the image signatures. Now
that PKCS#1 v1.5 support is removed, all certificates that are signed
with RSA now use the more modern padding scheme.
Change-Id: Id87d7d915be594a1876a73080528d968e65c4e9a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Previously, TF-A could not support large RSA key sizes as the
configuration options passed to MBEDTLS prevented storing and performing
calculations with the larger, higher-precision numbers required. With
these changes to the arguments passed to MBEDTLS, TF-A now supports
using 3072 (3K) and 4096 (4K) keys in certificates.
Change-Id: Ib73a6773145d2faa25c28d04f9a42e86f2fd555f
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
The STM32 console driver was pre-pending '\r' before '\n'.
It is now managed by the framework with the flag:
CONSOLE_FLAG_TRANSLATE_CRLF.
Remove the code in driver, and add the flag for STM32MP1.
Change-Id: I5d0d5d5c4abee0b7dc11c2f8707b1b5cf10149ab
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The SHA256 DMA driver can be used by multiple SoCs. Move it to the
common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I96319eeeeeebd503ef0dcb07c0e4ff6a67afeaa5
Meson is the internal code name for the SoC family. The correct name for
the platform should be Amlogic. Change the name of the platform
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Icc140e1ea137f12117acbf64c7dcb1a8b66b345d
DBLOCKSIZE should be filled such as the data size is 2^DBLOCKSIZE.
Hence it is calculated with __builtin_ctz.
Change-Id: Id6b5ff9b594afc4fc523a388011beed307e6abd1
Signed-off-by: Yann Gautier <yann.gautier@st.com>
If the max-frequency property is provided in the device tree mmc node,
it should be managed. The max allowed frequency will be the min between
this property value and what the card can support.
Change-Id: I885b676c3300d2670a0fe4c6ecab87758b5893ad
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This function can be used on several stm32mp devices, it is then moved in
plat/st/common/stm32mp_common.c.
Change-Id: I862debe39604410f71a9ddc28713026362e9ecda
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To use spinlocks, MMU should be enabled, as well as data cache.
A common function is created (moved from clock file).
It is then used whenever a spinlock has to be taken, in BSEC and clock
drivers.
Change-Id: I94baed0114a2061ad71bd5287a91bf7f1c6821f6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
In order to correctly manage the bring-up of non boot CPUs, the RTCAPB
clock needs to be enabled.
It controls the access to backup registers, where the CPU entrypoint
will be stored.
Change-Id: Ifeeceb4faf64bc9e0778030444f437cc0bb27272
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Introduce driver for STM32 IWDG peripheral (Independent Watchdog).
It is configured according to device tree content and should be enabled
from there.
The watchdog is not started by default. It can be started after an HW
reset if the dedicated OTP is fused.
The watchdog also needs to be frozen if a debugger is attached.
This is done by configuring the correct bits in DBGMCU.
This configuration is allowed by checking BSEC properties.
An increase of BL2 size is also required when adding this new code.
Change-Id: Ide7535d717885ce2f9c387cf17afd8b5607f3e7f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Clean up the DDR B header files and remove checkpatch errors.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I9648ef5511df299688fd5284513812d32a1f8064
Fix as many line-over-80s as possible. There are still a few remaining,
which would need further refactoring.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I7225d9fab658d05e3315d8c3fa3c9f3bbb1ab40d
Address more checkpatch CHECKs and ERRORs, no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ife682288cef3afa860571b2aca647c9ffe936125
Do basic automated checkpatch fixes on the ddr_b, no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ie401ec049a05d2c4c8044749994391adea171679
The ddr_a and ddr_b register macros are the same for the most part,
unify them into a single header.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I8f55d6d779837215339ac0010e8c8ab5f6748d75
Do minor coding style changes to the common DDR init code to make it
checkpatch compliant and move macros out into rcar_def.h.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I67eadf8099e4ff8702105c9e07b13f308d9dbe3d
Currently, console drivers prepend '\r' to '\n' by themselves. This is
common enough to be supported in the framework.
Add a new flag, CONSOLE_FLAG_TRANSLATE_CRLF. A driver can set this
flag to ask the framework to transform LF into CRLF instead of doing
it by itself.
Change-Id: I4f5c5887591bc0a8749a105abe62b6562eaf503b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Rename RCAR_PRODUCT_* to PRR_PRODUCT_* and drop the duplicate
RCAR_PRODUCT_* macro.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I6b2789790b85edb79c026f0860d70f323d113d96
Pull out the PRR_* macros into rcar_def.h and remove multiple copies of
it. Now that there are still RCAR_* macros in rcar_def.h too and they
have the exact same meaning as the PRR_* macros, but that's for another
patch.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Icb7f61b971b1a23102bd1b9f58cda580660a55fc
NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.
All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)
Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>
NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.
All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.
Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: Julius Werner <jwerner@chromium.org>
Add support for multiple Cryptocell revisions which
use different APIs.
This commit only refactors the existing code in preperation to the addition
of another Cryptocell revisions later on.
Signed-off-by: Gilad Ben-Yossef <gilad.benyossef@arm.com>
Change-Id: I16d80b31afb6edd56dc645fee5ea619cc74f09b6
Code using Cryptocell specific APIs was used as part of the
arm common board ROT support, instead of being abstracted
in Cryptocell specific driver code, creating two problems:
- Any none arm board that uses Cryptocell wuld need to
copy and paste the same code.
- Inability to cleanly support multiple versions of Cryptocell
API and products.
Move over Cryptocell specific API calls into the Cryptocell
driver, creating abstraction API where needed.
Signed-off-by: Gilad Ben-Yossef <gilad.benyossef@arm.com>
Change-Id: I9e03ddce90fcc47cfdc747098bece86dbd11c58e
Update the skeleton implementation of the console interface.
The 32 bit version was outdated and has been copied from the 64 bit
version.
Change-Id: Ib3e4eb09402ffccb1a30c703a53829a7bf064dfe
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Pass the ddrBackup variable around instead of making it a global variable.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ib796181247712e464b77f5f8be5f851745727d74
---
NOTE: The camelcase is fixed in later patch.
Partly inline ddr_init_e3.h into ddr_init_e3.c . Drop duplicate
INITDRAM_* macros, which are defined in boot_init_dram.h .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I758661d337a86b6a07f82cd4067fbc149cbaed1e
Replace ad-hoc register accessors with generic ones, remove the ad-hoc
implementation. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I21446a00a38c6a39d6a48652c34f59814074e831
Unify boot_init_dram_regdef_*.h into boot_init_dram_regdef.h and
clean up it's coding style a bit.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Iae3375969c05f80209ebf7b1ebc3633a7f6317ff
Remove the ad-hoc BITn macros and replace them with generic BIT(n) macro.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I5d0b44d6cba5a69895fed505f6ff780d3574907f
Modify PFC code and rename macro of MFIS according to Errata of
Hardware User's Manual
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I0ece522647319286350843bbbe8b8ba8b0ae9bac
Avinash Mehta
Nicolas Le Bayon
Yann Gautier
Madhukar Pappireddy
Lionel Debieve
Haojian Zhuang
Carlo Caione
Andre Przywara
Alexei Fedorov
Justin Chadwell
Chiaki Fujii
Yoshifumi Hosoya
Marek Vasut
Masahiro Yamada
Julius Werner
Gilad Ben-Yossef
Ambroise Vincent
Toshiyuki Ogasahara