Update supported models list according to changes for v2.8 release in
ci/tf-a-ci-scripts repository
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ica7e062db77237220bcd861837f392496db1653a
Cortex-A710 erratum 2291219 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r2p0, and is fixed in r2p1. The workaround is to set
CPUACTLR2_EL1[36] to 1 before the power down sequence that sets
CORE_PWRDN_EN. This allows the cpu to retry the power down and prevents
the deadlock. TF-A never clears this bit even if it wakes up from the
wfi in the sequence since it is not expected to do anything but retry to
power down after and the bit is cleared on reset.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I7d3a97dfac0c433c0be386c1f3d2f2e895a3f691
Cortex-X3 erratum 2313909 is a Cat B erratum that applies to revisions
r0p0 and r1p0, and is fixed in r1p1. The workaround is to set
CPUACTLR2_EL1[36] to 1 before the power down sequence that sets
CORE_PWRDN_EN. This allows the cpu to retry the power down and prevents
the deadlock. TF-A never clears this bit even if it wakes up from the
wfi in the sequence since it is not expected to do anything but retry to
power down after and the bit is cleared on reset.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2055130/latest
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I5935b4bcd1e6712477c0d6eab2acc96d7964a35d
Neoverse-N2 erratum 2326639 is a Cat B erratum that applies to revision
r0p0 and is fixed in r0p1. The workaround is to set CPUACTLR2_EL1[36] to
1 before the power down sequence that sets CORE_PWRDN_EN. This allows
the cpu to retry the power down and prevents the deadlock. TF-A never
clears this bit even if it wakes up from the wfi in the sequence since
it is not expected to do anything but retry to power down after and the
bit is cleared on reset.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest/
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: I9a325c5b9b498798e5efd5c79a4a6d5bed97c619
Platforms which implement pwr_domain_pwr_down_wfi differ substantially
in behaviour. However, different cpus require similar sequences to power
down. This patch tightens the behaviour of these platforms to end on a
wfi loop after performing platform power down. This is required so that
platforms behave more consistently on power down, in cases where the wfi
can fall through.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Ie29bd3a5e654780bacb4e07a6d123ac6d2467c1f
Threat model for EL3 SPMC.
The mitigations are based on the guidance
provided in FF-A v1.1 EAC0 spec.
Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>
Change-Id: I7f4c9370b6eefe6d1a7d1afac27e8b3a7b476072
Add documentation how to build EL3 SPMC,
briefly describes all FF-A interfaces,
SP boot flow, SP Manifest, Power Management,
Boot Info Protocol, Runtime model and state
transition and Interrupt Handling.
Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>
Change-Id: I630df1d50a4621b344a09e462563eacc90109de4
The Cortex-X3 cpu port was developed before its public release when it
was known as Makalu ELP. Now that it's released we can use the official
product name.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Iebb90cf2f77330ed848a3d61c5f6928942189c5a
Optimised the loop workaround for Spectre_BHB mitigation:
1. use of speculation barrier for cores implementing SB instruction.
2. use str/ldr instead of stp/ldp as the loop uses only X2 register.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I8ac53ea1e42407ad8004c1d59c05f791011f195d
We should switch console to runtime state. If we don't do this, the
state will keep boot state even we exit from BL31.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id2269ccf2fdc22e0fa088c3c0365836730172233
Function imx_system_off() writes SNVS_LPCR register to power off the SoC
without bit masking. This clears other bits like LPWUI_EN and breaks
the function of SoC wake-up using RTC alarm. Fix it by updating poweroff
related bits only.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Change-Id: If641af4dc1103c67e1a645c03bb36a5f56665aef
Fixed the qemu 32 bit clang build fail caused because of
no march32 directives in TF_CFLAGS_aarch32 variable
march32_directive is initialized later in Makefile and since clang build
uses Immediate set instead of Lazy set , TF_CFLAGS_aarch32 doesn't
have mcpu variable.
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I09094a0912ee2d9d0e11f65135a352de8a135936
Add missing aeabi_memcpy.S file from llvm compiler-rt library [1]. This
is required for Aarch32 builds with clang.
[1] https://github.com/llvm/llvm-project.git
Change-Id: I7fd6ab1e81dd45d24afef49a3eb8fcdcbc5c082f
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Upgrade the zlib source files to the ones present in the version 1.2.13
of zlib [1]. Since 1.2.11 the use of Arm crc32 instructions has been
introduced so update the files to make use of this.
[1] https://github.com/madler/zlib/tree/v1.2.13
Change-Id: Ideef78c56f05ae7daec390d00dcaa8f66b18729e
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Common TEE use cases require 64 MB these days, and not just 16 MB.
This in turn requires more XLAT tables to be pre-allocated for BL31.
Change-Id: I85c4033da64785f3e3272b0e9a4da4bceb20fcc7
Signed-off-by: vallau01 <valentin.laurent@trustonic.com>
Signed-off-by: Lukas Hanel <lukas.hanel@trustonic.com>
* changes:
docs(imx8m): update for high assurance boot
feat(imx8m): add support for high assurance boot
feat(imx8mp): add hab and map required memory blocks
feat(imx8mn): add hab and map required memory blocks
feat(imx8mm): add hab and map required memory blocks
Use four spaces for indentation to maintain a consistent style. This
attempts to make the linker scripts more friendly for readers.
Signed-off-by: Jorge Troncoso <jatron@google.com>
Change-Id: Iaf26d3c8bd7053fd9605a64ebccdae0792a90b9e
Arm has decided to deprecate the sgi575 and rdn1edge platforms.
The development of software and fast models for these platforms
has been discontinued. rdn1edge platform has been superseded by the
rdn2 platform, which is already supported in TF-A and CI work is
underway for this platform.
Change-Id: If2228fb73549b244c3a5b0e5746617b3f24fe771
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Enable PIE support so the BL31 firmware can be loaded from anywhere
within the OCRAM (SRAM). For the PIE support we only need to replace the
BL31_BASE define by the BL31_START symbol which is a relocatable and we
need to enable it by setting ENABLE_PIE := 1.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I52e654917167f0faf6aa437da233d8faf1f2bb26
No functional change.
Introduce BLx_SIZE defines and calculate the limits based on the
BLx_BASE and the BLx_SIZE define. Also make use of SZ_128K to make it
easier to read. This is required for later BL31 PIE support since it
drops the calculation based on the BL31_LIMIT and BL31_BASE.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I8670faa5d5a572ef230011594f3d0d594fb257d9
No functional change. Use the setup_page_tables() helper function which
does the three calls for us. Also the function has some logging support
which will be nice during debugging.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Ic465491ff5468e812e805de56be3b6b92d245080
No functional change.
Introduce the bl_regions array to gather all regions and make use of the
MAP_REGION_FLAT() macro. The array is than passed to mmap_add() to map
all regions. While on it introduce some defines so the addr, size and
flags can be read more easily.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I9f0ae9fc89514db71bef734b867c46574833831c
Enable PIE support so the BL31 firmware can be loaded from anywhere
within the OCRAM (SRAM). For the PIE support we only need to replace the
BL31_BASE define by the BL31_START symbol which is a relocatable and we
need to enable it by setting ENABLE_PIE := 1.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I33c8e35c35112d70d2725eebe484a853a8aad9e0
Introduce BL31_SIZE define and calculate the limit based on the
BL31_BASE and the BL31_SIZE define. Also make use of SZ_128K to make it
easier to read. This is required for later BL31 PIE support since it
drops the calculation based on the BL31_LIMIT and BL31_BASE.
While on it remove the duplicated <lib/utils_def.h> include.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Ifca40bd5682ef993db986439115abd9e9a66a5b2
No functional change.
Use the setup_page_tables() helper function which does the three calls
for us. Also the function has some logging support which will be nice
during debugging.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I2f0182f19300a3a57bbeb7e2107c5fb5525dd0c1
No functional change.
Introduce the bl_regions array to gather all regions and make use of the
MAP_REGION_FLAT() macro. The array is than passed to mmap_add() to map
all regions. While on it introduce some defines so the addr, size and
flags can be read more easily.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Id5849d2a7326a943927f458f1c6abbc041f5be18
Enable PIE support so the BL31 firmware can be loaded from anywhere
within the OCRAM (SRAM). How important this is shows the back and forth
of the BL31_BASE address starting with TF-A v2.5. Since then the
BL31_BASE address wasn't stable and choosing the correct combination of
SPL version loadaddress and TF-A version loadaddr was tricky.
For the PIE support we only need to replace the BL31_BASE by the
BL31_START which is a relocatable symbol and to enable it by setting
ENABLE_PIE := 1.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I4214db1f27120f9f9cd1413ccd7a5a7d095ff45d
No functional change.
Introduce BLx_SIZE defines and calculate the limits based on the
BLx_BASE and the BLx_SIZE define. Also make use of SZ_128K to make it
easier to read. This is required for later BL31 PIE support since it
drops the calculation based on the BL31_LIMIT and BL31_BASE.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Idae34c1dfcedd35238fe083149080a199d50eed0
No functional change. Use the setup_page_tables() helper function which
does the three calls for us. Also the function has some logging support
which will be nice during debugging.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I350965414939865220f745ef5b24d2cdc3095e7b
Introduce the bl_regions array to gather all regions and make use of the
MAP_REGION_FLAT() macro. The array is than passed to mmap_add() to map
all regions. While on it introduce some defines so the addr, size and
flags can be read more easily. No functional change done.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I7f637beea61138a86d691cd78fba2dd17e4dc925
Swap the BL31_BASE define with the BL31_START symbol. This is required
for later added PIE support because the symbol location can be relocated
whereas the define can't be relocated. In case of disabled PIE support
BL31_START equals BL31_BASE and so we don't need a ifdef.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Ic1bbf3af5b346898bfcbb207ffc27d9a5bdcaae7
The fsp_table access by [i-1] can cause invalid memory access in case of
i=0. This can be the case if no fsp_table is available. Fix this by
adding the idx variable which tracks the correct index.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: If2285517eb9fe837f3ad54360307a77a658bf62c
The ARMv8 ARM says about the values in the ID register scheme:
==== D17.1.3 Principles of the ID scheme for fields in ID registers ===
The ID fields, which are either signed or unsigned, use increasing
numerical values to indicate increases in functionality. Therefore,
if a value of 0x1 indicates the presence of some instructions, then
the value 0x2 will indicate the presence of those instructions plus
some additional instructions or functionality. This means software
can be written in the form:
if (value >= number) {
// do something that relies on the value of the feature
}
=======================================================================
So to check for the presence of a certain architecture feature, we
should not check against a certain specific value, as it's done right
now in several cases.
Relax the test for Fine Grained Trapping (FGT) to just check against
the field being 0 or not.
This fixes TF-A crashing due to an unhandled exception, when running a
Linux kernel on an FVP enabling ARMv8.9 features. The value of
ID_AA64MMFR0_EL1.FGT went from 0b0001 to 0b0010 there.
Change-Id: Ic3f1625a7650306ed388a0660429ca8823c673c2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
laurenw-arm
Manish Pandey
Manish V Badarkhe
Olivier Deprez
Sandrine Bailleux
Bipin Ravi
Madhukar Pappireddy
Boyan Karatotev
Shruti Gupta
Rex-BC Chen
Shawn Guo
Arvind Ram Prakash
Daniel Boulby
Arthur Cassegrain
Lukas Hanel
Jorge Troncoso
Marco Felsch
Andre Przywara
Joanna Farley