Makefile updated to use LLVM utilities instead of GNU utilities when
compiling with clang. `CROSS_COMPILE` is not required since this
dependency has been removed.
Change-Id: I19706b84b9310e07935516681b86596c04ef8ad6
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Changing the log message from notice to verbose, to save some space
and that leads to successfull compilation.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Iee5a808febf211464eb8ba6f0377f79378333f5d
Cortex-A15 does not support FEAT_CSV2 so the existing workaround for
Spectre V2 is sufficient to mitigate against Spectre BHB attacks,
however the code needed to be updated to work with the new build flag.
Also, some code was refactored several years ago and not updated in
the Cortex-A15 library file so this patch fixes that as well.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I768c88a38c561c91019b038ac6c22b291955f18e
Previously the SCR_EL3.AMVOFFEN bit was set for all contexts, this
behavior is incorrect as it allows secure world to access the virtual
offset registers when it should not be able to. This patch only sets
AMVOFFEN for non-secure world.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I2c61fe0a8a0092df089f1cb2c0d8a45c8c8ad0d3
* changes:
feat(intel): add SMC support for HWMON voltage and temp sensor
feat(intel): add SMC support for Get USERCODE
fix(intel): extend SDM command to return the SDM firmware version
feat(intel): add SMC for enquiring firmware version
fix(intel): configuration status based on start request
fix(intel): bit-wise configuration flag handling
fix(intel): get config status OK status
fix(intel): use macro as return value
fix(intel): fix fpga config write return mechanism
feat(intel): add SiP service for DCMF status
feat(intel): add RSU 'Max Retry' SiP SMC services
feat(intel): enable SMC SoC FPGA bridges enable/disable
feat(intel): add SMC/PSCI services for DCMF version support
feat(intel): allow to access all register addresses if DEBUG=1
fix(intel): modify how configuration type is handled
feat(intel): support SiP SVC version
feat(intel): enable firewall for OCRAM in BL31
feat(intel): create source file for firewall configuration
fix(intel): refactor NOC header
This change performs a basic configuration of the SMMU root registers
interface on an RME enabled system. This permits enabling GPC checks
for transactions originated from a non-secure or secure device upstream
to an SMMU. It re-uses the boot time GPT base address and configuration
programmed on the PE.
The root register file offset is platform dependent and has to be
supplied on a model command line.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I4f889be6b7afc2afb4d1d147c5c1c3ea68f32e07
Add support to read temperature and voltage using SMC command
Signed-off-by: Kris Chaplin <kris.chaplin@linux.intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I806611610043906b720b5096728a5deb5d652b1d
This patch adds SMC support for enquiring FPGA's User Code.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I82c1fa9390b6f7509b2284d51e199fb8b6a9b1ad
Updates intel_smc_fw_version function to read SDM
firmware version in major/minor ACDS release number.
Update CONFIG_STATUS Response Data [1] bit0-23.
Return INTEL_SIP_SMC_STATUS_ERROR if unexpected
firmware version is being retrieved.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I018ccbb961786a75dc6eb873b0f232e71341e1d2
This command allows non-secure world software to enquire the
version of currently running Secure Device Manager (SDM) firmware.
This will be useful in maintaining backward-compatibility as well
as ensuring software cross-compabitility.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ibc23734d1135db74423da5e29655f9d32472a3b0
Configuration status command now returns the result based on the last
config start command made to the runtime software. The status type can
be either:
- NO_REQUEST (default)
- RECONFIGURATION
- BITSTREAM_AUTH
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I97406abe09b49b9d9a5b43e62fe09eb23c729bff
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change configuration type handling to bit-wise flag. This is to align
with Linux's FPGA Manager definitions and promotes better compatibility.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I5aaf91d3fec538fe3f4fe8395d9adb47ec969434
Config status have different OK requirement between MBOX_CONFIG_STATUS
and MBOX_RECONFIG_STATUS request. This patch adds the checking to
differentiate between both command.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I45a4c3de460b031757dbcbd0b3a8055cb0a55aff
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
SMC function should strictly return INTEL_SIP_SMC_STATUS macro. Directly
returning value of variable status might cause confusion in calling
software.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Iea17f4feaa5c917e8b995471f3019dba6ea8dcd3
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This revert commit 279c8015fefcb544eb311b9052f417fc02ab84aa.
The previous change breaks this feature compatibility with Linux driver.
Hence, the fix for the earlier issue is going to be fixed in uboot instead.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I93220243bad65ed53322050d990544c7df4ce66b
This patch adds 2 additional RSU SiP services for Intel SoCFPGA
platforms:
- INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS stores current DCMF status in
BL31
- INTEL_SIP_SMC_RSU_DCMF_STATUS is calling function for non-secure
software to retrieve stored DCMF status
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ic7a3e6988c71ad4bf66c58a1d669956524dfdf11
* changes:
feat(ti): allow build config of low power mode support
feat(ti): increase SEC_SRAM_SIZE to 128k
feat(ti): add PSCI handlers for system suspend
feat(ti): add gic save and restore calls
feat(ti): add enter sleep method
This change adds a new utility function - `fdtw_find_or_add_subnode`
to find a subnode. If the subnode is not present, the function adds
it in the flattened device tree.
Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org>
Change-Id: Idf3ceddc57761ac015763d4a8b004877bcad766a
Enable SoC FPGA bridges enable/disable from non-secure world
through secure monitor calls
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4474abab9731923a61ff0e7eb2c2fa32048001cb
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Support get/store RSU DCMF version:
INTEL_SIP_SMC_RSU_DCMF_VERSION - Get current DCMF version
INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION - Store current DCMF version
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I85ffbc0efc859736899d4812f040fd7be17c8d8d
Allow to access all register addresses from SMC call if compile the code
with DEBUG=1 for debugging purpose.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Idd31827fb71307efbdbcceeaa05f6cb072842e10
This patch creates macros to handle different configuration
types. These changes will help in adding new configuration
types in the future.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I5826a8e5942228a9ed376212f0df43b1605c0199
This command supports to return SiP SVC major and minor version.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: Ia8bf678b8de0278aeaae748f24bdd05f8c9f9b47
Set OCRAM as secure region and required privileged access in BL31 to
prevent software running in normal world (non-secure) accessing memory
region in OCRAM which may contain sensitive information (e.g. FSBL,
handoff data)
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib6b24efd69f49cd3f9aa4ef2ea9f1af5ce582bd6
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Move codes that previously were part of system_manager driver into
firewall driver which are more appropriate based on their functionalities.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I35e9d792f35ee7491c2f306781417a0c8faae3fd
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Refactor NOC header to be shareable across both Stratix 10 and Agilex
platforms. This patch also removes redundant NOC declarations in system
manager header file.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I6348b67a8b54c2ad19327d6b8c25ae37d25e4b4a
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
In order to modularize software libraries and platform drivers,
we create makefile helpers to treat a folder as a basic compile
unit.
Each module has a build rule (rules.mk) to describe driver and software
library source codes to be built in.
Signed-off-by: Leon Chen <leon.chen@mediatek.com>
Change-Id: Ib2113b259dc97937b7295b265509025b43b14077
Introduce EXTRA_LINKERFILE for GCC linker options. GCC linker
can realize multiple linker scripts, and vendors can extend ro or
text sections by inserting sections among the original sections
specified by blx.ld.S.
Vendors can assign compiled object files by assigning MODULE_OBJS
with their own built path.
Signed-off-by: Leon Chen <leon.chen@mediatek.com>
Change-Id: I1bd2e0383a52204723816131da4b7948def4c4e9
As per change [1], now HW_CONFIG gets loaded in secure and
non-secure memory. Hence updated the documentation to show
secure and non-secure load region of HW_CONFIG in FVP Arm
platform.
Additionally, added a note on how FW_CONFIG address gets
passed from BL2 to BL31/SP_MIN.
[1]: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/14620
Change-Id: I37e02ff4f433c87bccbe67c7df5ecde3017668b9
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added a description for the newly introduced 'ns-load-address' property
in the dtb-registry node of FCONF.
Change-Id: Ief8e8a55a6363fd42b23491d000b097b0c48453b
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Currently, HW-config is loaded into non-secure memory, which mean
a malicious NS-agent could tamper with it. Ideally, this shouldn't
be an issue since no software runs in non-secure world at this time
(non-secure world has not been started yet).
It does not provide a guarantee though since malicious external
NS-agents can take control of this memory region for update/corruption
after BL2 loads it and before BL31/BL32/SP_MIN consumes it. The threat
is mapped to Threat ID#3 (Bypass authentication scenario) in threat
model [1].
Hence modified the code as below -
1. BL2 loads the HW_CONFIG into secure memory
2. BL2 makes a copy of the HW_CONFIG in the non-secure memory at an
address provided by the newly added property(ns-load-address) in
the 'hw-config' node of the FW_CONFIG
3. SP_MIN receives the FW_CONFIG address from BL2 via arg1 so that
it can retrieve details (address and size) of HW_CONFIG from
FW_CONFIG
4. A secure and non-secure HW_CONFIG address will eventually be used
by BL31/SP_MIN/BL32 and BL33 components respectively
5. BL31/SP_MIN dynamically maps the Secure HW_CONFIG region and reads
information from it to local variables (structures) and then
unmaps it
6. Reduce HW_CONFIG maximum size from 16MB to 1MB; it appears
sufficient, and it will also create a free space for any future
components to be added to memory
[1]: https://trustedfirmware-a.readthedocs.io/en/latest/threat_model/threat_model.html
Change-Id: I1d431f3e640ded60616604b1c33aa638b9a1e55e
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Not all K3 platforms support low power mode, so to allow these
features to be included for platforms that do in build and
therefore reported in the PSCI caps, define K3_PM_SYSTEM_SUSPEND
flag that can be set during build that will cause appropriate
space and functionality to be included in build for system
suspend support.
Change-Id: I821fbbd5232d91de6c40f63254b855e285d9b3e8
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Increase the lite platform SEC_SRAM_SIZE to 128k to allow space
for GIC context.
Change-Id: I6414309757ce9a9b7b3a9233a401312bfc459a3b
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Add necessary K3 PSCI handlers to enable system suspend to be reported
in the PSCI capabilities when asked during OS boot.
Additionally, have the handlers provide information that all domains
should be off and also have the power domain suspend handler invoke the
TISCI_MSG_ENTER_SLEEP message to enter system suspend.
Change-Id: I351a16167770e9909e8ca525ee0d74fa93331194
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Add functions to save and restore GICv3 redist and dist contexts during
low power mode and then call these during the suspend entry and finish
psci handlers.
Change-Id: I26c2c0f3b7fc925de3b349499fa42d2405441577
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
This TISCI API must be used to trigger entry into system suspend, and
this is done through the use of TI_SCI_MSG_ENTER_SLEEP. Introduce a
method to send this message.
Change-Id: Id7af5fb2a34623ad69e76764f389ff4d8d259fba
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
* changes:
fix(versal): fix coverity scan warnings
feat(versal): get version for ATF related EEMI APIs
feat(versal): enhance PM_IOCTL EEMI API to support additional arg
feat(versal): add common interfaces to handle EEMI commands
Update the make command with the RESET_TO_BL31=1 addition.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I46cc81abb539773706348464b3061d20d94522e9
Harrison Mutai
Venkatesh Yadav Abbarapu
Manish Pandey
John Powell
Olivier Deprez
Kris Chaplin
Sieu Mun Tang
Abdul Halim, Muhammad Hadi Asyrafi
Madhukar Pappireddy
Chee Hong Ang
Ruchika Gupta
Manish V Badarkhe
Siew Chin Lim
Leon Chen
Dave Gerlach