Move the DBSC write enabling and disabling to dbsc_setting() function,
to make it local, instead of having it all over the code.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: If8e5657c3230b5d82b551cb89b11c4d13a2d096b
Drop useless comments in dbsc_setting(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: If54e770ce81c9a6610cd89c3d5f01ea9b96af521
Convert the mstat table from a complex structure to simple sequence
of uint64_t values, since the structure described just that and the
loop can operate over incrementing sequence of addresses just fine.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I5f797024c76f2c18b160ac50ede9e1eac24e6652
Pull out the mstat fix array into separate file, to align the structure
of the driver with the other SoCs. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I2559c5ceb06505361d026ebc1b762bebe17d920b
Use common qos_regs.h instead of a local copy in the D3 QoS init.
Fill missing registers into qos_regs.h . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ie22a81bf5cbf3f8970c6e3fbb43ef52c26fb7168
The DBSC_SCFCTST2 is always written with the same value, no matter
what the MD pin value is, drop the entire check and just write the
register with the one and only possible value.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Icd3e12f814d4fdcddaec2d1415f0bbf92169284b
Drop useless comments in dbsc_setting(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I6fe03e16c63278aa6fc1bbcc72c07a450d3b7638
The extra level of nesting is not necessary, drop it.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I6d268eae8df5794511d5211e5a59a36291adab3e
Use common qos_regs.h instead of a local copy in the M3N QoS init.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I9670c9cdb320d6724175c22210d048af54490b47
The DBSC_SCFCTST2 is always written with the same value, no matter
what the MD pin value is, drop the entire check and just write the
register with the one and only possible value.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Idf26cf064e99e95f0140dd747183efe6a6d7f0bf
Drop useless comments in dbsc_setting(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I4460c55bf58f33ca72c9bbad99a28b5e4ef7421e
The extra level of nesting is not necessary, drop it.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I086ab1f457866f0e2c3ccd67609c0be35631f893
Convert the mstat table from a complex structure to simple sequence
of uint64_t values, since the structure described just that and the
loop can operate over incrementing sequence of addresses just fine.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I41728b30087996edc9799f320bf6a3b4465538bd
Pull out the mstat fix array into separate file, to align the structure
of the driver with the other SoCs. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I21c18e80ab9225837e5553dadcf196605e878143
Use common qos_regs.h instead of a local copy in the M3W QoS init.
Fill missing registers into qos_regs.h . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I91175c86cdb94b9271c880df2cb65949f15f1bad
The system configuration controller is mainly used to manage
the compensation cell and other IOs and system related settings.
The SYSCFG driver is in charge of configuring masters on the interconnect,
IO compensation, low voltage boards, or pull-ups for boot pins.
All other configurations should be handled in Linux drivers requiring it.
Device tree files are also updated to manage vdd-supply regulator.
Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To activate the CSG option, the driver needs to set the bit2
of PLLNCR register = SSCG_CTRL: Spread Spectrum Clock Generator.
This bit should not be cleared when starting the PLL.
Change-Id: Ie5c720ff03655f27a7e7e9e7ccf8295dd046112f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Rework the macro that eases the table definition: the src and msk fields
are now using MASK and SHIFT defines of each source register.
Some macros had then to be modified: _USART1_SEL, _ASS_SEL and _MSS_SEL to
_UART1_SEL, _AXIS_SEL, and _MCUS_SEL to match register fields.
Note: the mask for RCC_ASSCKSELR_AXISSRC is changed from 0x3 to 0x7
to reflect the size of the register field, even if there are only
3 possible clock sources.
The mask value is also corrected for QSPI and FMC clock selection.
Change-Id: I44114e3c1dd37b9fa1be1ba519611abd9a07764c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.
The oscillators description structure is also moved to STM32MP1 clock
driver, as it is no more used in stm32mp1_clkfunc and cannot be in a
generic file.
Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Those defines are used in STM32MP1 clock driver.
It is better to put them altogether with already defined registers.
Change-Id: I6f8ad8c2477b947af6f76283a4ef5c40212d0027
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The DBSC_SCFCTST2 is always written with the same value, no matter
what the MD pin value is, drop the entire check and just write the
register with the one and only possible value.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I4d8926eb3c44c61ec777c05c581ce8247f13daa6
Drop useless comments in dbsc_setting(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I9e3d025567ff4e10e2b4448e8a518b4eee13f6c5
The extra level of nesting is not necessary, drop it.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I7b55a6fa53145ff0427e05656234917f486031df
Convert the mstat table from a complex structure to simple sequence
of uint64_t values, since the structure described just that and the
loop can operate over incrementing sequence of addresses just fine.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I379a1a5dfe2095d9477b364393ab120c4d8e1ba4
Pull out the mstat fix array into separate file, to align the structure
of the driver with the other SoCs. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ia92abe11c425220a065d707c350644c955efef92
Use common qos_regs.h instead of a local copy in the H3 QoS init.
Fill missing registers into qos_regs.h . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I0b5ceab71be07e270885bdff403e5292e3373787
Convert the R-Car Gen3 platform and both SCIF and Log drivers
to multi-console API.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I18556973937d150b60453f9150d54ee612571e35
The chain of trust description and the pointer pointing to its first
element were incompatible, thus requiring an explicit type cast for
the assignment.
- cot_desc was an array of
const pointers to const image descriptors.
- cot_desc_ptr was a const pointer to
(non-constant) pointers to const image descriptors.
Thus, trying to assign cot_desc to cot_desc_ptr (with no cast) would
generate the following compiler warning:
drivers/auth/tbbr/tbbr_cot.c:826:14: warning: initialization discards
‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
REGISTER_COT(cot_desc);
^~~~~~~~
Change-Id: Iae62dd1bdb43fe379e3843d96461d47cc2f68a06
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
According to Arm GIC spec(IHI0069E, section 4.6.1),
when GICD_CTLR.DS == 0, Secure Group 1 interrupts
are treated as Group 0 by a CPU interface if:
- The PE does not implement EL3.
- ICC_SRE_EL1(S).SRE == 0
When a cpu enter suspend or deep idle, it might be
powered off. When the cpu resume, according to
the GIC spec(IHI0069E, section 9.2.15, 9.2.16 and
9.2.22) the ICC_SRE_EL1.SRE reset value is 0 (if
write is allowed) and G0/G1S/G1NS interrupt of the
GIC cpu interface are all disabled.
If a G1S SPI interrupt occurred and the target cpu
of the SPI is assigned to a specific cpu which is
in suspend and is powered off, when the cpu resume
and start to initial the GIC cpu interface, the
initial sequence might affect the interrupt group
type of the pending interrupt on the cpu interface.
Current initial sequence on the cpu interface is:
1. Enable G0 interrupt
2. Enable G1S interrupt
3. Enable ICC_SRE_EL1(S).SRE
It is possible to treat the pending G1S interrupt
as G0 interrupt on the cpu interface if the G1S
SPI interrupt occurred between step2 and step3.
To prevent the above situation happend, the initial
sequence should be changed as follows:
1. Enable ICC_SRE_EL1(S).SRE
2. Enable G0 interrupt
3. Enable G1S interrupt
Change-Id: Ie34f6e0b32eb9a1677ff72571fd4bfdb5cae25b0
Signed-off-by: James Kung <kong1191@gmail.com>
Payload length of the get dram mapping information message is 0.
The mbx_mem->len parameter should be 4, it only contains
message header.
Fixes: b67d202 ("plat/synquacer: enable SCMI support")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: If1cd4c855da2dc5dc4b6da3bea152b8441971de7
We've seen issues with some THG based UFS chips, where
after reset the LUNs don't always enumerate properly.
After some debugging, we found that extending the mdelay
here seems to resolve the issue by giving the chips enough
time to complete reset.
Change-Id: I848f810b2438ed6ad3d33db614c61d2cef9ac400
Signed-off-by: John Stultz <john.stultz@linaro.org>
For security DMA should be blocked at the SMMU by default
unless explicitly enabled for a device. SMMU is disabled
after reset with all streams bypassing the SMMU, and
abortion of all incoming transactions implements a default
deny policy on reset.
This patch also moves "bl1_platform_setup()" function from
arm_bl1_setup.c to FVP platforms' fvp_bl1_setup.c and
fvp_ve_bl1_setup.c files.
Change-Id: Ie0ffedc10219b1b884eb8af625bd4b6753749b1a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch is a preparation for the subsequent changes in
SMMUv3 driver. It introduces a new "smmuv3_poll" function
and replaces inline functions for accessing SMMU registers
with mmio read/write operations. Also the infinite loop
for the poll has been replaced with a counter based timeout.
Change-Id: I7a0547beb1509601f253e126b1a7a6ab3b0307e7
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Rockchip re-uses the ti uart console driver and for aarch32 needs a
specific variant, so add it.
There are also aarch32 ti socs, so it may be useful for them as well
at some point.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I31ede7cc7b10347b3691cff051db2b985fd59e17
It removes the need to unregister the console on system suspend.
Change-Id: Ic9311a242a4a9a778651f7e6380bd2fc0964b2ce
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Add a driver for configuring the SBSA Generic Watchdog which aids in
the detection of errant system behaviour.
Change-Id: I5a1e7149c69fd8b85be7dfbcf511f431339946f4
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.
The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.
Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Changed to save and restore cntpct_el0 using memory mapped
register for generic timer when System Suspend and Resume.
Reported by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I40fd9f5434c4d52b320cd1d20322b9b8e4e67155
Very rarely, LPDDR4 power consumption may not decrease
In self-refresh mode.
This patch fixes the DBSC4 self-refresh mode sequence.
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Kenji Miyazawa <kenji.miyazawa.xt@renesas.com>
Signed-off-by: Chiaki Fujii <chiaki.fujii.wj@renesas.com>
Change-Id: I838fa0892b1caf1ecd3f04538b3427e7d971ef59
This changes the auth_img_desc_t struct to have pointers to struct
arrays instead of struct arrays. This saves memory as many of these
were never used, and can be NULL pointers. Note the memory savings are
only when these arrays are not initialised, as it is assumed these
arrays are fixed length. A possible future optimisation could allow for
variable length.
memory diff:
bl1: bl2:
text text
-12 -12
bss bss
-1463 0
data data
-56 -48
rodata rodata
-5688 -2592
total total
-7419 -2652
Change-Id: I8f9bdedf75048b8867f40c56381e3a6dc6402bcc
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
When Trusted Board Boot is enabled, we need to specify the Chain of
Trust (CoT) of the BL1 and BL2 images. A CoT consists of an array
of image descriptors. The authentication module assumes that each
image descriptor in this array is indexed by its unique image
identifier. For example, the Trusted Boot Firmware Certificate has to
be at index [TRUSTED_BOOT_FW_CERT_ID].
Unique image identifiers may not necessarily be consecutive. Also,
a given BL image might not use all image descriptors. For example, BL1
does not need any of the descriptors related to BL31. As a result, the
CoT array might contain holes, which unnecessarily takes up space in
the BL binary.
Using pointers to auth_img_desc_t structs (rather than structs
themselves) means these unused elements only use 1 pointer worth of
space, rather than one struct worth of space. This patch also changes
the code which accesses this array to reflect the change to pointers.
Image descriptors not needed in BL1 or BL2 respectively are also
ifdef'd out in this patch. For example, verifying the BL31 image is
the responsibility of BL2 so BL1 does not need any of the data
structures describing BL31.
memory diff:
bl1: bl2:
text text
-20 -20
bss bss
-1463 0
data data
-256 -48
rodata rodata
-5240 -1952
total total
-6979 -2020
Change-Id: I163668b174dc2b9bbb183acec817f2126864aaad
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Now it is needed to use the full path of the common header files.
Commit 09d40e0e08 ("Sanitise includes across codebase") provides more
information.
Change-Id: Ifedc79d9f664d208ba565f5736612a3edd94c647
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Marek Vasut
Yann Gautier
Sandrine Bailleux
James kung
Masahisa Kojima
Yoshifumi Hosoya
John Stultz
Alexei Fedorov
Heiko Stuebner
Ambroise Vincent
Aditya Angadi
Toshiyuki Ogasahara
Chiaki Fujii
Yusuke Goda
Joel Hutton