Implemented FWU metadata load and verification APIs.
Also, exported below APIs to the platform:
1. fwu_init - Load FWU metadata in a structure. Also, set the
addresses of updated components in I/O policy
2. fwu_is_trial_run_state - To detect trial run or regular run
state
Change-Id: I67eeabb52d9275ac83be635306997b7c353727cd
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added FWU platform specific functions declarations in common
platform header.
Change-Id: I637e61753ea3dc7f7e7f3159ae1b43ab6780aef2
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added the build options used in defining the firmware update metadata
structure.
Change-Id: Idd40ea629e643e775083f283b75c80f6c026b127
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added a firmware update metadata structure as per section 4.1
in the specification document[1].
Also, added the build options used in defining the firmware
update metadata structure.
[1]: https://developer.arm.com/documentation/den0118/a/
Change-Id: I8f43264a46fde777ceae7fd2a5bb0326f1711928
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
External Abort may happen also during printing of some messages by
U-Boot or kernel. So print newline before fatal abort error message.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic7579b605e695c2e4cb9a4f5cdc2d0b3e5083e49
These files are needed during boot, but they were missing
for semihosting.
With this patch, the list of files is complete enough to
boot on ATF platform via semihosting.
Change-Id: I2f0ca25983a6e18096f040780776f19f8040ea79
Signed-off-by: stsp@users.sourceforge.net
Consider a RAS scenario:
Enter EL3 by sync exception, then call spm_mm_sp_call() enter
EL0s to handle this error, then call sdei_dispatch_event() to
inform OS. Finally, return back to OS from sync exception flow.
Similar flow is sgi_ras_intr_handler() in sgi_ras.c.
The icc_pmr_el1 register will be change in above flow:
1 cm_el1_sysregs_context_save(NON_SECURE);
-> ehf_exited_normal_world();
##icc_pmr_el1: 0xf8 => 0x80
2 spm_mm_sp_call();
3 sdei_dispatch_event();
4 ehf_activate_priority(sdei_event_priority(map));
##icc_pmr_el1: 0x80 => 0x60
5 restore_and_resume_ns_context();
-> ehf_exited_normal_world();
##return due to has_valid_pri_activations(pe_data) == 1
6 ehf_deactivate_priority(sdei_event_priority(map));
##icc_pmr_el1: 0x60 => 0x80
The icc_pmr_el1 was rewrote from 0xf8 to 0x80. This issue will
result in OS hang when eret to OS from RAS flow.
Move ehf_activate_priority(sdei_event_priority(map)) after
restore_and_resume_ns_context() can fix this issue.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: If01ec55cf0aabf1594dece1ad50d3ec3406cdabc
The rpi4 has a single nonstandard ECAM. It is broken
into two pieces, the root port registers, and a window
to a single device's config space which can be moved
between devices. Now that we have widened the page
tables/MMIO window, we can create a read/write acces
functions that are called by the SMCCC/PCI API.
As an example platform, the rpi4 single device ECAM
region quirk is pretty straightforward. The assumption
here is that a lower level (uefi) has configured and
initialized the PCI root to match the values we are
using here.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: Ie1ffa8fe9aa1d3c62e6aa84746a949c1009162e0
Now that we have adjusted the address map, added the
SMC conduit code, and the RPi4 PCI callbacks, lets
add the flags to enable everything in the build.
By default this service is disabled because the
expectation is that its only useful in a UEFI+ACPI
environment.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: I2a3cac6d63ba8119d3b711db121185816b89f8a2
Update documentation and group platform specific build options into
their own subsections.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I05927d8abf9f811493c49b856f06329220e7d8bb
The function read_uuid() zeroes the UUID destination buffer
on error. However, it mistakenly uses the dest pointer
that has been incremented many times during the parsing,
leading to an out-of-bounds write.
To fix this, retain a pointer to the start of the buffer,
and use this when clearing it instead.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Change-Id: Iee8857be5d3f383ca2eab86cde99a43bf606f306
* changes:
refactor(plat/allwinner): clean up platform definitions
refactor(plat/allwinner): do not map BL32 DRAM at EL3
refactor(plat/allwinner): map SRAM as device memory by default
refactor(plat/allwinner): rename static mmap region constant
feat(bl_common): import BL_NOBITS_{BASE,END} when defined
The SDEI specification now says that during an SDEI
event handler dispatch the SPSR should be set according
to the TakeException() pseudocode function defined in
the Arm Architecture Reference Manual. This patch sets
the SPSR according to the function given in
ARM DDI 0487F.c page J1-7635
Change-Id: Id2f8f2464fd69c701d81626162827e5c4449b658
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Recent changes to enable SVE for the secure world have disabled AMU
extension by default in the reset value of CPTR_EL3 register. So the
platform has to enable this extension explicitly.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I7d930d96ec22d7c3db961411370564bece0ce272
If SVE are enabled for both Non-secure and Secure world along with AMU
extension, then it causes the TAM_BIT in CPTR_EL3 to be set upon exit
from bl31. This restricts access to the AMU register set in normal
world. This fix maintains consistency in both TAM_BIT and CPTR_EZ_BIT
by saving and restoring CPTR_EL3 register from EL3 context.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Id76ce1d27ee48bed65eb32392036377716aff087
A RAS error may be triggered while offline core in OS. Error:
Uncorrected software error in the Distributor, with IERR=9,SERR=f.
Core put to sleep before its Group enables were cleared.
gicv3_cpuif_disable() will be called in offline core flow.
According to GIC architecture version 3 and version 4:
Architectural execution of a DSB instruction guarantees that
the last value written to ICC_IGRPEN0_EL1, ICC_IGRPEN1_EL1,
ICC_IGRPEN1_EL3 or GICC_CTLR.{EnableGrp0, EnableGrp1}is observed
by the associated Redistributor.
An ISB or other context synchronization operation must precede
the DSB to ensure visibility of System register writes.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: Iff1475657f401374c761b5e8f2f5b3a4b2040e9d
Group the SCP base/size definitions in a more logical location.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id43f9b468d7d855a2413173d674a5ee666527808
BL31 does not appear to ever access the DRAM allocated to BL32,
so there is no need to map it at EL3.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ie8727b793e53ea14517894942266f6da0333eb74
The SRAM on Allwinner platforms is shared between BL31 and coprocessor
firmware. Previously, SRAM was mapped as normal memory by default.
This scheme requires carveouts and cache maintenance code for proper
synchronization with the coprocessor.
A better scheme is to only map pages owned by BL31 as normal memory,
and leave everything else as device memory. This removes the need for
cache maintenance, and it makes the mapping for BL31 RW data explicit
instead of magic.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I820ddeba2dfa2396361c2322308c0db51b55c348
This constant specifically refers to the number of static mmap regions.
Rename it to make that clear.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I475c037777ce2a10db2631ec0e7446bb73590a36
If SEPARATE_NOBITS_REGION is enabled, the platform may need to map
memory specifically for that region. Import the symbols from the linker
script to allow the platform to do so.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Iaec4dee94a6735b22f58f7b61f18d53e7bc6ca8d
At this stage of development Non Volatile counters are not implemented
in the Diphda platform.
This commit disables their use during the Trusted Board Boot by
overriding the NV counters get/set functions.
Change-Id: I8dcbebe0281cc4d0837c283ff637e20b850988ef
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
This commit enables trusted-firmware-a with Trusted Board Boot support
for the Diphda 64-bit platform.
Diphda uses a FIP image located in the flash. The FIP contains the
following components:
- BL2
- BL31
- BL32
- BL32 SPMC manifest
- BL33
- The TBB certificates
The board boot relies on CoT (chain of trust). The trusted-firmware-a
BL2 is extracted from the FIP and verified by the Secure Enclave
processor. BL2 verification relies on the signature area at the
beginning of the BL2 image. This area is needed by the SecureEnclave
bootloader.
Then, the application processor is released from reset and starts by
executing BL2.
BL2 performs the actions described in the trusted-firmware-a TBB design
document.
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Change-Id: Iddb1cb9c2a0324a9635e23821c210ac81dfc305d
Align documentation with changes of messaging method for partition
manifest:
- Bit[0]: support for receiving direct message requests
- Bit[1]: support for sending direct messages
- Bit[2]: support for indirect messaging
- Bit[3]: support for managed exit
Change the optee_sp_manifest to align with the new messaging method
description.
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Change-Id: I333e82c546c03698c95f0c77293018f8dca5ba9c
One platform may not implement all the protocols, to avoid build break
when we not include all the protocols, add weak functions.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I1485baa2e8f381cb0eede1a7b93ed10e49934971
Add SCMI power domain protocol, with POWER_STATE_NOTIFY and
POWER_STATE_CHANGE_REQUESTED_NOTIFY not implemented.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ia7c4db57c4c702667f8eaa630c924016e4a8bde0
This patch adds the option HARDEN_SLS_ALL that can be used to enable
the -mharden-sls=all, which mitigates the straight-line speculation
vulnerability. Enable this by adding the option HARDEN_SLS_ALL=1,
default this will be disabled.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I0d498d9e96903fcb879993ad491949f6f17769b2
Existing macro ERROR() prints string "ERROR" followed by string
specified by caller. Therefore via this existing macro it is not
possible to end incomplete / existing line by a newline character.
This change adds a new macro ERROR_NL() which prints just a newline
character without any prefix. Implementation of this macro is done via a
new function tf_log_newline() which based on supplied log level either
return or print newline character.
If needed in future based on this tf_log_newline() function can be
defined also macros for other log levels.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I05414ca177f94cdc0f6077394d9c4af4a4382306
When enabling U-boot with UEFI and secure boot, the size of U-boot
becomes more than 1MB. So we enlarge BL33 to 2MB.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I9d9d24132bb1ec17ef6080dc72e93c7f531c97b5
Manish V Badarkhe
Olivier Deprez
Madhukar Pappireddy
Pali Rohár
Manish Pandey
Joanna Farley
Stas Sergeev
Ming Huang
Jeremy Linton
David Horstmann
André Przywara
Peng Fan
Daniel Boulby
Arunachalam Ganapathy
Samuel Holland
Abdellatif El Khlifi
Maksims Svecovs
Venkatesh Yadav Abbarapu
Roger Lu
Ying-Chun Liu (PaulLiu)