* changes:
docs(layerscape): add ls1046a soc and board support
feat(ls1046aqds): add board ls1046aqds support
feat(ls1046afrwy): add ls1046afrwy board support
feat(ls1046ardb): add ls1046ardb board support
feat(ls1046a): add new SoC platform ls1046a
fix(nxp-tools): fix tool location path for byte_swape
fix(nxp-qspi): fix include path for QSPI driver
build(changelog): add new scopes for NXP layerscape platforms
* changes:
feat(stm32mp1): enable format-signedness warning
fix(stm32mp1): correct types in messages
fix(st-pmic): correct verbose message
fix(st-sdmmc2): correct cmd_idx type in messages
fix(st-fmc): fix type in message
fix(mtd): correct types in messages
fix(usb): correct type in message
fix(tzc400): correct message with filter
fix(psci): correct parent_node type in messages
fix(libc): correct some messages
fix(fconf): correct image_id type in messages
fix(bl2): correct messages with image_id
Currently only the lowest 2 DRAM region were configured in the
TrustZone Controller, but the platform supports 6 regions spanning the
whole address space.
Configuring all of them to allow tests to access memory also in those
higher memory regions.
FVP memory map:
https://developer.arm.com/documentation/100964/1116/Base-Platform/Base---memory/Base-Platform-memory-map
Note that last row is wrong, describing a non-existing 56bit address,
all region labels should be shifted upward.
Issue has been reported and next release will be correct.
Change-Id: I695fe8e24aff67d75e74635ba32a133342289eb4
Signed-off-by: Federico Recanati <federico.recanati@arm.com>
On Debian systems it is possible to use system-wide Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ib01d9376776b8afcb1ca46c16076e28c3d2e581d
Add initial support for RD-Edmunds platform. This platform is considered
as a variant of RD-N2 platform with only major change being the CPU
which is Demeter instead of Neoverse-N2.
Signed-off-by: Tony K Nadackal <tony.nadackal@arm.com>
Change-Id: I939d9eac652fa9e76ad002ee5e6107aa79baa013
* changes:
feat(corstone1000): identify bank to load fip
fix(corstone1000): change base address of FIP in the flash
feat(corstone1000): implement platform specific psci reset
feat(corstone1000): made changes to accommodate 3MB for optee
build(corstone1000): rename diphda to corstone1000
Add the flag -Wformat-signedness to TF_CFLAGS for STM32MP1.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I6af18778902b0a4dae1c08735d2d070ef3d137ce
Replace %d with %u in log, to avoid warning when
-Wformat-signedness is enabled.
Change-Id: Ied5823520181f225ae09bd164e2e52e9a7692c60
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As cmd_idx is unsigned, we have to use %u and not %d.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: I6954a8c939f3fb47dbb2c6db56a1909565af078b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As page is unsigned, we should use %u and not %d.
Find with -Wformat-signedness.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I7205971ee5e83163e4fe47d33bb9e90832b59ae0
Some messages don't use the correct types, update them.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: Ie5384a7d139c48a623e1617c93d15fecc8a36061
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As filter is unsigned, we have to use %u and not %d.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: I9fc9f15774dc974edfa3db65f5aecd1e70bc146b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As parent_node is unsigned, we have to use %u and not %d.
This avoids warning when -Wformat-signedness is enabled.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I5ab7acb33227d720b2c8a4ec013435442b219a44
Replace %d with %u in logs, to avoid warning when
-Wformat-signedness is enabled.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Id058f6fb0fd25ce5f83b1be41082403fcb205841
As image_id is unsigned, we have to use %u and not %d.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: I292e1639847e69ba79265fc32871c0ad7eebc94e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As image_id is unsigned, we have to use %u and not %d.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: I3f868f3d14c9f19349f0daa8a754179f887339c0
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Secure enclave decides the boot bank based on the firmware update
state of the system and updates the boot bank information at a given
location in the flash. In this commit, bl2 reads the given flash
location to indentify the bank from which it should load fip from.
Signed-off-by: Satish Kumar <satish.kumar01@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Change-Id: I7f0f4ffc97189c9deb99db44afcd966082ffbf21
A53 AP BootROM is just 16 kB long and is mapped to address range
0xFFFF0000-0xFFFF4000. RVBAR_EL3 register has value 0xFFFF0000.
A53 AP BootROM itself is in the BootROM window which is 1 MB long and
mapped to address range 0xFFF00000-0xFFFFFFFF.
CM3 BootROM is not accessible from A53 core.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5d4a4c7b1e7550c4738c67a872d341f945d48bbc
More space in the flash is reserved up front for metadata
parser and UEFI variables. That requires change in the flash
base address of where images are present.
Signed-off-by: Satish Kumar <satish.kumar01@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Change-Id: Ieaabe09374d707de18d36505c69b6c9a8c2ec2e9
This change implements platform specific psci reset
for the corstone1000.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Change-Id: I25f77234506416c3376ff4a028f6ea40ebe68437
Update document for nxp-layerscape to add ls1046a SoC and ls1046ardb,
ls1046afrwy board support.
Also update maintainer of ls1046a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I522f978bc93aa8d1f1d60fa8efef392b7d854df7
ls1046aqds board is full function board to evaluate ls1046a platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Id1befe37a25f7c379e76791538348fd03bba78f7
The LS1046A Freeway board (FRWY) is a high-performance computing,
evaluation, and development platform that supports the LS1046A
architecture processor capable of support more than 32,000 CoreMark
performance. The FRWY-LS1046A board supports the LS1046A processor,
onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E
interfaces for Wi-Fi, FRWY-LS1046A-AC includes the Wi-Fi card.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I9a9680689e6f17bf4cc76fd5d1883eed6ace5149
The LS1046A reference design board (RDB) is a high-performance
computing, evaluation, and development platform that supports
the Layerscape LS1046A architecture processor.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib7a01b309e0b0acc7f38e22b138e9e181dff244a
The LS1046A is a cost-effective, power-efficient, and highly
integrated system-on-chip (SoC) design that extends the reach
of the NXP value-performance line of QorIQ communications
processors. Featuring power-efficient 64-bit Arm Cortex A72
cores with ECC-protected L1 and L2 cache memories for high
reliability, running up to 1.8 GHz.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Change-Id: I208d9bf1702410463c2b2630d31d0cd4eb7e8837
1. Add scopes for ls1046a and related boards: ls1046ardb,
ls1046aqds, ls1046afwry.
2. Add new scope for NXP QSPI driver.
3. Add new scope for NXP tools.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I68ef7dd25628b393dbfbb8dbf59d5185945ea61c
Armada 3720 BootROM searches for GPT partition with partition type GUID
6828311A-BA55-42A4-BCDE-A89BB5EDECAE and completely ignores GPT
partition name. It does not check for "MARVELL BOOT PARTITION".
This fact is incorrectly documented even in official Marvell Armada 3700
Functional Specification.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I35279f39de2d12148fc16f2730a9a074dc0b58eb
These changes are required to accommodate 3MB for OP-TEE and this
is required for SP's part of optee
Added size macro's for better readability of the code
Moved uboot execution memory from CVM to DDR
Change-Id: I16657c6e336fe7c0fffdee1617d10af8a2c76732
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
diphda platform is now being renamed to corstone1000.
These changes are to replace all the instances and traces
of diphda corstone1000.
Change-Id: I330f3a112d232b99b4721b6bf0236253b068dbba
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Add helper functions to generate event log for imx8mm
when MEASURED_BOOT=1.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Ifc947d749055787fbda0b39170aa2eb8865b7802
The PIE compilation is used only for BL32, move the ENABLE_PIE to
sp_min-stm32mp1.mk file. Override PIE flags, as sp_min.mk file is
included after the flags are set in Makefile.
The BL2_IN_XIP_MEM was added for a feature not yet upstreamed.
It is then removed from platform.mk file.
Change-Id: If055e51e0f160f99cd4e4cf68ca718d4d693119c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Added a couple of sub-sections (Coverity Scan and Test Configuration)
under "Add build configuration" to update the patch owners on the
sections they need to be aware of while introducing new source files.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I84adb182f9633863aac864df43578249c2269c1e
tamp_bkpr() returns a register address. So use uintptr_t instead of
uin32_t.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Change-Id: I5eddfa525465313dadfec18d128248a968ba74e2
The snprintf code uses the uintptr_t type, which is defined in stdint.h.
We do not include this header explicitly, but get the definition
indirectly through some other header doing so.
However this breaks when snprintf is compiled in isolation (for instance
for unit-testing), so let's add this #include to make things right.
Change-Id: I1299767ee482f5cf1af30c4df2e8f7e596969b41
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In our unsigned_num_print() function we first print the integer into a
local buffer, then put this through alignment and padding and output the
result. For this we use a local buffer, sized by the maximum possible
length of the largest possible number.
However this assumes that the radix is not smaller than 10, which is
indeed the smallest value we pass into this static function at the
moment. To prevent accidents in the future, should we add support for
other radices, add an assert to enforce our assumption.
Unfortunately this cannot be a static assert (CASSERT), since the
compiler is not smart enough to see that the argument is always coming
from a literal.
Change-Id: Ic204462600d9f4c281d899cf9f2c698a0a33a874
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Madhukar Pappireddy
Olivier Deprez
Federico Recanati
Pali Rohár
Tony K Nadackal
Yann Gautier
Satish Kumar
Emekcan Aras
Jiafei Pan
Arpita S.K
Vishnu Banavath
Ying-Chun Liu (PaulLiu)
Joanna Farley
Manish Pandey
Jayanth Dodderi Chidanand
Nicolas Toromanoff
Andre Przywara