This patch fixes a bug in the bakery lock implementation where a data
synchronisation barrier instruction is not issued before sending an event as
mandated by the ARMv8 ARM. This can cause a event to be signalled before the
related memory accesses have completed resulting in erroneous execution.
FixesARM-software/tf-issues#272
Change-Id: I5ce02bf70afb001d967b9fa4c3f77442931d5349
This patch reassigns the crash console on Juno and FVP to use the runtime
BL3-1 console. The crash console is changed to SoC UART0 (UART2) from the
previous FPGA UART0 (UART0) on Juno. In FVP, it is changed from UART0 to
UART1.
FixesARM-software/tf-issues#256
Change-Id: I7df54f86ca00ec2652c27261dd66a94c12610816
This patch replaces the usage of the GIC private driver in Juno with
the generic ARM GIC driver. The private driver is no longer necessary
and has been removed from the Juno port.
FixesARM-software/tf-issues#253
Change-Id: I6aaabc252e5e6fb5fcf44ab6d0febd9b38791056
This patch introduces several improvements to the ARM GIC driver:
* In function gicd_set_itargetsr(), target CPU is specified using
the same bit mask detailed in the GICD_ITARGETSRn register instead
of the CPU linear ID, removing the dependency between bit position
and linear ID in the platform porting. The current CPU bit mask
may be obtained by reading GICD_ITARGETSR0.
* PPIs and SGIs are initialized in arm_gic_pcpu_distif_setup().
SPIs are initialized in arm_gic_distif_setup().
* By default, non secure interrupts are assigned the maximum
priority allowed to a non secure interrupt (defined by
GIC_HIGHEST_NS_PRIORITY).
* GICR base address is allowed to be NULL for GICv1 and GICv2.
Change-Id: Ie2837fe860d43b2282e582dfdb13c39c6186f232
This patch optimizes the Cortex-A57 cluster power down sequence by not
flushing the Level1 data cache. The L1 data cache and the L2 unified
cache are inclusive. A flush of the L2 by set/way flushes any dirty
lines from the L1 as well. This is a known safe deviation from the
Cortex-A57 TRM defined power down sequence. This optimization can be
enabled by the platform through the 'SKIP_A57_L1_FLUSH_PWR_DWN' build
flag. Each Cortex-A57 based platform must make its own decision on
whether to use the optimization.
This patch also renames the cpu-errata-workarounds.md to
cpu-specific-build-macros.md as this facilitates documentation
of both CPU Specific errata and CPU Specific Optimization
build macros.
Change-Id: I299b9fe79e9a7e08e8a0dffb7d345f9a00a71480
This the patch replaces the DSB SY with DSB ISH
after disabling L2 prefetches during the Cortex-A57
power down sequence.
Change-Id: I048d12d830c1b974b161224eff079fb9f8ecf52d
Prior to this patch, the errata workarounds were applied for any version
of the CPU in the release build and in the debug build an assert
failure resulted when the revision did not match. This patch applies
errata workarounds in the Cortex-A57 reset handler only if the 'variant'
and 'revision' fields read from the MIDR_EL1 match. In the debug build,
a warning message is printed for each errata workaround which is not
applied.
The patch modifies the register usage in 'reset_handler` so
as to adhere to ARM procedure calling standards.
FixesARM-software/tf-issues#242
Change-Id: I51b1f876474599db885afa03346e38a476f84c29
This patch adds level specific cache maintenance functions
to cache_helpers.S. The new functions 'dcsw_op_levelx',
where '1 <= x <= 3', allow to perform cache maintenance by
set/way for that particular level of cache. With this patch,
functions to support cache maintenance upto level 3 have
been implemented since it is the highest cache level for
most ARM SoCs.
These functions are now utilized in CPU specific power down
sequences to implement them as mandated by processor specific
technical reference manual.
Change-Id: Icd90ce6b51cff5a12863bcda01b93601417fd45c
This patch deprecates the build option to relocate the shared data
into Trusted DRAM in FVP. After this change, shared data is always
located at the base of Trusted SRAM. This reduces the complexity
of the memory map and the number of combinations in the build
options.
FixesARM-software/tf-issues#257
Change-Id: I68426472567b9d8c6d22d8884cb816f6b61bcbd3
This patch adds support on the Juno platform for entering a wfi in
response to a PSCI CPU_SUSPEND call where the state type is a
standby state.
Change-Id: I0a102dee1f8d2ad936c63ad1d1d3ad001a4a4768
This patch configures the TrustZone Controller in Juno to split
the 2GB DDR-DRAM memory at 0x80000000 into Secure and Non-Secure
regions:
- Secure DDR-DRAM: top 16 MB, except for the last 2 MB which are
used by the SCP for DDR retraining
- Non-Secure DDR-DRAM: remaining DRAM starting at base address
Build option PLAT_TSP_LOCATION selects the location of the secure
payload (BL3-2):
- 'tsram' : Trusted SRAM (default option)
- 'dram' : Secure region in the DDR-DRAM (set by the TrustZone
controller)
The MMU memory map has been updated to give BL2 permission to load
BL3-2 into the DDR-DRAM secure region.
FixesARM-software/tf-issues#233
Change-Id: I6843fc32ef90aadd3ea6ac4c7f314f8ecbd5d07b
This patch replaces direct accesses to the TZC-400 registers by the
appropiate calls to the generic driver available in the Trusted
Firmware in order to initialize the TrustZone Controller.
Functions related to the initialization of the secure memory,
like the TZC-400 configuration, have been moved to a new file
'plat_security.c'. This reorganization makes easier to set up
the secure memory from any BL stage.
TZC-400 initialization has been moved from BL1 to BL2 because BL1
does not access the non-secure memory. It is BL2's responsibility
to enable and configure the TZC-400 before loading the next BL
images.
In Juno, BL3-0 initializes some of the platform peripherals, like
the DDR controller. Thus, BL3-0 must be loaded before configuring
the TrustZone Controller. As a consequence, the IO layer
initialization has been moved to early platform initialization.
FixesARM-software/tf-issues#234
Change-Id: I83dde778f937ac8d2996f7377e871a2e77d9490e
This patch uses the IMAGE_BL<x> constants to create translation tables specific
to a boot loader stage. This allows each stage to create mappings only for areas
in the memory map that it needs.
FixesARM-software/tf-issues#209
Change-Id: Ie4861407ddf9317f0fb890fc7575eaa88d0de51c
This patch avoids the problem of crash reporting mechanism accessing
global data in BSS by 'plat_print_gic_regs' for FVP platforms. Earlier
it depended on the global 'plat_config' object for the GIC Base address
in FVP platforms which would have caused exception if it were accessed
before the BSS was initialized. It is now fixed by dynamically
querying the V2M_SYS_ID to find the FVP model type and accordingly
selecting the appropriate GIC Base address.
This patch also fixes the 'plat_print_gic_regs' to use the correct GIC
Distributor base address for printing GICD_IS_PENDR register values
for both Juno and FVP platforms.
FixesARM-Software/tf-issues#236
Change-Id: I545c7b908b3111419bf27db0575ce86acf86784b
This patch fixes the incorrect value of the LENGTH attribute in
the linker scripts. This attribute must define the memory size, not
the limit address.
FixesARM-software/tf-issues#252
Change-Id: I328c38b9ec502debe12046a8912d7dfc54610c46
This patch adds support for supplying pre-built BL binaries for BL2,
BL3-1 and BL3-2 during trusted firmware build. Specifying BLx = <path_to_BLx>
in the build command line, where 'x' is any one of BL2, BL3-1 or BL3-2, will
skip building that BL stage from source and include the specified binary in
final fip image.
This patch also makes BL3-3 binary for FIP optional depending on the
value of 'NEED_BL33' flag which is defined by the platform.
FixesARM-software/tf-issues#244FixesARM-software/tf-issues#245
Change-Id: I3ebe1d4901f8b857e8bb51372290978a3323bfe7
This patch resets the value of CNTVOFF_EL2 before exit to EL1 on
warm boot. This needs to be done if only the Trusted Firmware exits
to EL1 instead of EL2, otherwise the hypervisor would be responsible
for this.
FixesARM-software/tf-issues#240
Change-Id: I79d54831356cf3215bcf1f251c373bd8f89db0e0
Final updates to readme.md and change-log.md for ARM Trusted
Firmware version 1.0. Also increment the version in the Makefile.
Change-Id: I00fe1016c8b936834bbf7bbba7aab07f51261bbb
* Fix broken link to SCP download.
* Remove requirement to install `ia32-libs`. This package is no
longer available in current versions of Ubuntu and is no
longer required when using the Linaro toolchain.
Change-Id: I9823d535a1d69136685754b7707b73e1eef0978d
This patch gathers miscellaneous minor fixes to the documentation, and comments
in the source code.
Change-Id: I631e3dda5abafa2d90f464edaee069a1e58b751b
Co-Authored-By: Soby Mathew <soby.mathew@arm.com>
Co-Authored-By: Dan Handley <dan.handley@arm.com>
This patch reorganizes the firmware design guide to add information about the
port of the ARM Trusted Firmware to the Juno ARM development platform.
Change-Id: I0b80e2e7a35ccad1af2e971506cfb7fe505f8b84
This patch makes the Trusted Firmware build instructions in the
user guide platform independent.
FVP specific instructions have been grouped together under a new
section dedicated to FVP.
Juno specific instructions to build and run the Trusted Firmware,
UEFI and Linux have been added.
Change-Id: I9bfb1b9d732b1f73abbe29f68ac931e1773a4fd5
Fix the instructions for resetting to the BL3-1 entrypoint in the
user guide. The BL3-1 and BL3-2 image locations changed in the fix
to ARM-software/tf-issues#100 (commit 186c1d4). This is distinct
from the similar issue fixed in commit bfb1dd5.
Also clarify the dependence on the FVP_SHARED_DATA_LOCATION and
FVP_TSP_RAM_LOCATION build options, and tidy up the "Notes
regarding Base FVP configuration options" section.
Change-Id: I6b03452a71f0c69efa169852712bcb184242696e
This patch changes the UART port assignment for various BL stages
so as to make it consistent on the platform ports. The BL1, BL2 and
BL3-1 now uses UART0 on the FVP port and SoC UART0 on the Juno port.
The BL3-2 uses UART2 on the FVP port and FPGA UART0 on the Juno
port.
This provides an interim fix to ARM-software/tf-issues#220 until
support is added for changing the UART port for a BL image between
cold boot and runtime.
Change-Id: Iae5faea90be3d59e41e597b34a902f93e737505a
Move up the version numbers of the following Trusted Firmware
dependencies in the user guide:
* Foundation and Base FVPs (latest publically available
versions).
* EDK2 implementation. The guide now uses the latest version from
https://github.com/ARM-software/edk2.git. This requires the
`iasl` package to also be installed.
* Linux kernel. The guide now uses the latest version from
https://github.com/ARM-software/linux.git.
* Linaro OpenEmbedded file system.
* ARM Development Studio 5.
Change-Id: I95bb863a61e47b9ef8be3d110f7087375ee78add
This patch removes the PRIMARY_CPU definition hardcoded in the
Juno port. Instead, the primary CPU is obtained at runtime by
reading the SCC General Purpose Register 1 (GPR_1), whose value
is copied by the SCP into shared memory during the boot process.
Change-Id: I3981daa92eb7142250712274cf7f655b219837f5
danh-arm
Achin Gupta
Soby Mathew
Juan Castillo
Vikram Kanigiri
Andrew Thoelke
Jens Wiklander
Sandrine Bailleux