Neoverse V1 erratum 1791573 is a Cat B erratum present in r0p0 and
r1p0 of the V1 processor core. It is fixed in r1p1.
SDEN can be found here:
https://documentation-service.arm.com/static/60d499080320e92fa40b4625
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ic6f92da4d0b995bd04ca5b1673ffeedaebb71d10
For AARCH64, BIT() will make the number as ULL type, let use BIT_32()
here.
And use %zu for size_t print format.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I1dc18d374cd2c6eb83b40b66ed6189dcc6a21728
A new seek handler is also created. It will be used for NAND to add an
extra offset in case of bad blocks, when FIP is used.
Change-Id: I03fb1588b44029db50583c0b2e7af7a1e88a5a7a
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
In case of FIP, the offsets given in the FIP header are relative.
If bad blocks are found between the FIP base address and this offset,
the offset should be updated, taking care of the bad blocks.
Change-Id: I96fefabb583b3d030ab05191bae7d45cfeefe341
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Some parameters from BootROM boot context can be required after boot.
To save space in SYSRAM, this context can be overwritten during images
load sequence. The needed information (here the boot interface) is
then saved in a local variable.
Change-Id: I5e1ad4630ccf78480f415a0a83939005ae67729e
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Avoid parsing device tree every time when returning
the DDR size.
A cache flush on this size is also added because TZC400 configuration
is applied at the end of BL2 after MMU and data cache being turned off.
Configuration needs to retrieve the DDR size to generate the correct
region. Access to the size fails because the value is still in the data
cache. Flushing the size is mandatory.
Change-Id: I3dd1958f37d806f9c15a5d4151968935f6fe642e
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
In BL2, the DDR can be mapped as secured in MMU, as no other SW
has access to it during its execution.
The TZC400 configuration is also updated to reflect this. When using
OP-TEE, the TZC400 is reconfigured at the end of BL2, to match OP-TEE
mapping. Else, SP_min will be in charge to reconfigure TZC400 to set
DDR non-secure.
Change-Id: Ic5ec614b218f733796feeab1cdc425d28cc7c103
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add new static functions to factorize code in stm32mp1_security.c.
Change-Id: Ifa5a1aaf7c56c25dba9a0ab8e985496d7cb06990
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The two existing plat/rockchip code owners seem to be no longer active
in the project and are not responding to reviews. There have been a
couple of small fixup patches[1][2][3] pending for months that couldn't
be checked in for lack of Code-Owner-Review+1 flag. Add myself to the
code owner list to unblock this bottleneck (I have been deeply involved
in the rk3399 port, at least, so I know most of the code reasonably
well).
[1] https://review.trustedfirmware.org/9616
[2] https://review.trustedfirmware.org/9990
[2] https://review.trustedfirmware.org/10415
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic7b2bb73c35a9bea91ff46ee445a22819d2045d9
For UART secure boot it is required also TIMN image, so pack it into
uart-images.tgz.bin archive which is created by mrvl_uart target.
$(TIMN_IMAGE) and $(TIM_IMAGE) variables are used only for UART images
so their content needs to be initialized from $(TIMN_UART_CFG) and
$(TIM_UART_CFG) config files. And not from $(TIMN_CFG) and $(TIM_CFG) as
it is now because they are not generated during mrvl_uart target. Fix it
to allow building mrvl_uart target before mrvl_flash target.
To match usage of these variables, rename them to $(TIMN_UART_IMAGE) and
$(TIM_UART_IMAGE).
To not complicate rule for building uart-images.tgz.bin archive, set
list of image files into a new $(UART_IMAGES) variable.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I83b980abb4047a3afb3ce3026842e1d873c490bf
For TIM config file use TIM name instead of DOIMAGE and use underscores
to make variable names more readable.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I1282ce11f1431c15458a143ae7bfcee85eed2432
In case the RCAR_RPC_HYPERFLASH_LOCKED is 0, emit DT node /soc/rpc@ee200000
with property status = "okay" into the DT fragment passed to subsequent
software, to indicate the RPC is unlocked.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Id93c4573ab1c62cf13fa5a803dc5818584a2c13a
Armada 3700 uses external TBB tool for creating images and does not use
internal TF-A doimage tool from tools/marvell/doimage/
Therefore set correct name of variable.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I38a94dca78d483de4c79da597c032e1e5d06d92d
Old Marvell a3700_utils and mv-ddr tarballs do not have to work with
latest TF-A code base. Marvell do not provide these old tarballs on
Extranet anymore. Public version on github repository contains all
patches and is working fine, so for public TF-A builds use only public
external dependencies from git.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iee5ac6daa9a1826a5b80a8d54968bdbb8fe72f61
BLE source files depend on external Marvell mv-ddr-marvell tree
(specified in $(MV_DDR_PATH) variable) and its header files. Add
dependency on $(MV_DDR_LIB) target which checks that variable
$(MV_DDR_PATH) is correctly set and ensures that make completes
compilation of mv-ddr-marvell tree.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I73968b24c45d9af1e3500b8db7a24bb4eb2bfa47
Do not set all include directories, including those for external targets
in one PLAT_INCLUDES variable.
Instead split them into variables:
* $(PLAT_INCLUDES) for all TF-A BL images
* BLE target specific $(PLAT_INCLUDES) only for Marvell BLE image
* $(MV_DDR_INCLUDES) for targets in external Marvell mv-ddr-marvell tree
Include directory $(CURDIR)/drivers/marvell is required by TF-A BL
images, so move it from ble.mk to a8k_common.mk.
Include directory $(MV_DDR_PATH) is needed only by Marvell BLE image, so
move it into BLE target specific $(PLAT_INCLUDES) variable.
And remaining include directories specified in ble.mk are needed only
for building external dependences from Marvell mv-ddr tree, so move them
into $(MV_DDR_INCLUDES) variable and correctly use it in $(MV_DDR_LIB)
target.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I331f7de675dca2bc70733d56b768f00d56ae4a67
Target mrvl_flash depends on external mv_ddr source code which is not
part of TF-A project. Do not expect that it is pre-downloaded at some
specific location and require user to specify correct path to mv_ddr
source code via MV_DDR_PATH build option.
TF-A code for Armada 37x0 platform also depends on mv_ddr source code
and already requires passing correct MV_DDR_PATH build option.
So for A8K implement same checks for validity of MV_DDR_PATH option as
are already used by TF-A code for Armada 37x0 platform.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I792f2bfeab0cec89b1b64e88d7b2c456e22de43a
This commit adds a DRAM size setting when building with
RCAR_DRAM_LPDDR4_MEMCONF=2 for M3N Ver.1.1 4GB DRAM.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Ib7fea862ab2e0bcafaf39ec030384f0fddda9b96
Update the revision number in the revision management file.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I44b9e5a992e8a44cfeafad6d2c1a97aa59baca4e
This commit adds the function to change the settings used for DDR
initialization depending on the board ID and DDR rank.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I94d550cea620748f5b15499fed1b791a69d61592
This commit fixes value to write to the ICCR register according to
the hardware manual.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I1f612a482c012a6739e2f31db80224b222df766c
This commit deletes the value of the redefined CPG register.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I05cf4a449ae28adb2ddd59593971a7d0cbcb21de
The DRAM channel 0 memory area in 32bit space is limited to 2 GiB window.
Furthermore, the first 128 MiB of this memory window are reserved and not
accessible by the system software, hence the 32bit area memory node is
limited to range 0x4800_0000..0xbfff_ffff.
In case there are more than 2 GiB of DRAM populated in channel 0, it is
necessary to generate two memory nodes, once covering the 2 GiB - 128 MiB
area in the 32bit space, and another covering the rest of the memory in
64bit space. This patch implements handling of such a case.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I3495241fb938e355352e817afaca8f01d04c81d2
Move the code that adds single new memory@ node into the DT fragment passed
to system software into separate function. Adjust the failure message to be
more specific and print the address range of node which failed to be added.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ie42cd7756b045271f070bca93c524fff6238f5a2
The BL33 size on this platform is limited to 1 MiB, add optional
support for decompressing and starting gzip-compressed BL33, which
may help with this size limitation. This functionality is disabled
by default, set RCAR_GEN3_BL33_GZIP=1 during build to enable it.
The BL33 at 0x50000000 should then be gzip compressed, however if
the BL33 does not have a valid gzip header, it is copied to the
correct location and started as-is, this is a fallback for legacy
systems and systems which update to gzip-compressed BL33.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Id93f1c7e6f17db1ffb952ea086562993473f6efa
All API calls except non-blocking should wait for
IPI response and read buffer to check return status
from firmware. Some of API calls are not reading
status from IPI payload data. Use sync method which
reads actual return status from IPI payload.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I6f568b85d0da639c264f507122e3015807d8423d
All API calls except non-blocking should wait for
IPI response and read buffer to check return status
from firmware. Some of API calls are not reading
status from IPI payload data. Use sync method which
reads actual return status from IPI payload.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I78f9c061a80cee6d524ade4ef124ca88ce1848cf
Used mmio* functions to read/write NVFLAGS registers to avoid
possibile reordering of instructions by compiler.
Change-Id: Iae50ac30e5413259cf8554f0fff47512ad83b0fd
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
In the FVP platform, BL1 uses flash only for read purpose
hence marked this flash region as read-only.
Change-Id: I3b57130fd4f3b4df522ac075f66e9799f237ebb7
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Erasing the FIP TOC header present in a flash is replaced by updating NV
flags with an error code on image load/authentication failure.
BL1 component uses these NV flags to detect whether a firmware update is
needed or not.
These NV flags get cleared once the firmware update gets completed.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I6232a0db07c89b2373b7b9d28acd37df6203d914
Madhukar Pappireddy
bipin.ravi
Rex-BC Chen
johpow01
Pali Rohár
Peng Fan
Lionel Debieve
Yann Gautier
Yann Gautier
Joanna Farley
Manish V Badarkhe
Julius Werner
Manish Pandey
Marek Vasut
Toshiyuki Ogasahara
Chiaki Fujii
Abhyuday Godhasara
Sandrine Bailleux