This patch adds necessary barriers after GPT entries are modified
so that the writes are observed correctly by the GPC hardware.
The shareability of GPC fetches are changed from OSH to ISH so
that they align with the shareability of MMU attributes for the
region. Thus by adding a dsbishst() between the GPT L1 entry
write as part of granule migration at runtime, we can now remove
the clean cache maintenance operation (CMO) for that region.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Signed-off-by: Robert Wakim <robert.wakim@arm.com>
Change-Id: Ib9e405b106f0db95c7fbdb26773c0ed41663a5b4
Update supported models list according to changes for v2.6 release in
ci/tf-a-ci-scripts repository:
* general FVP model update: d10c1b9
* gic600 update: aa2548a
* CSS prebults model update: f1c3a4f
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Change-Id: If2841f05238facb3cace7d5c8a78083d54f35e27
Replace double space with single space in stm32cubeprogrammer_usb.c.
Change-Id: I717b136119e85fe8e25dd540758525f995200458
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the --no-merges option when listing patches to check with rev-list
command, when running make checkpatch.
Change-Id: I47f3f5dfe358ed2b960a754f70aec0dc3c2b4536
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This file is unused and was introduced accidentally by one of the
commits in the MPMM patch stack. This functionality was instead
introduced by `fconf_amu_getter.c`.
Change-Id: Ib15b1114bacf9a2e7414c1fb35bd4fbdf0179210
Signed-off-by: Chris Kay <chris.kay@arm.com>
* changes:
feat(plat/st/stm32mp1): add STM32MP_USB_PROGRAMMER target
feat(plat/st/stm32mp1): add USB DFU support for STM32MP1
feat(plat/st): add STM32CubeProgrammer support on USB
feat(drivers/st/usb): add device driver for STM32MP1
feat(plat/st): add a USB DFU stack
feat(drivers/usb): add a USB device stack
* changes:
fix(fdts stm32mp1): update PLL nodes for ED1/EV1 boards
fix(fdts stm32mp1): set ETH clock on PLL4P on ST boards
feat(fdts stm32mp1): delete nodes for non-used boot devices
fix(fdts stm32mp1): use 'kHz' as kilohertz abbreviation
refactor(fdts stm32mp1): move STM32MP DDR node
feat(fdts stm32mp1): align DT with latest kernel
Add a support of USB as serial boot devices for STM32MP15x platform:
the FIP file is provide by STM32CubeProgrammer with the DFU protocol,
loaded in DDR at DWL_BUFFER_BASE address and then the io memmap is used.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I272c17c458ff1e9d0780f8fa22330c8a35533d19
Add the USB descriptor, the struct used for USB enumeration with
the function usb_dfu_plat_init().
The USB support is based on the usb lib and on the stm32mp1 usb driver.
The content of enumeration (the string descriptor) is identical to
ROM code to avoid the USB reset en re-enumeration needs.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I18b40649e8df83813a5a340b0eee44c9a3470e43
Add a file to support over USB the STMicroelectronics tool
STM32CubeProgrammer in BL2 for STM32MP15x platform.
This tools is based on DFU stack.
Change-Id: I48a8f772cb0e9b8be24c06847f724f0470c0f917
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add a device driver for Synopsis DWC2 USB IP of STM32MP15x,
this USB OTG device is only supported in device mode.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I90b21f094f6637b85f3ace23a3a3a2f6fd4e0951
Add a stack to support the Universal Serial Bus Device Class
Specification for Device Firmware Upgrade (USB DFU v1.1).
This stack is based on the USB device stack (USBD).
Change-Id: I8a56411d184882b6a9e3617c6dfb859086b8f353
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add a new USB framework to manage an USB device profile (USBD)
based on a peripheral controller driver (PCD).
This USB stack can be use to implement any Universal Serial Bus Device
Class in TF-A on top of a USB driver defined in the platform.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I7971ec6d952edec3511157a198e6e5359df4346b
This patch removes files that are not used by TF-R as well as
removes unused generic files from the TF-R makefile.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Idb15ac295dc77fd38735bf2844efdb73e6f7c89b
Align STM32MP157C-ED1/EV1 boards PLL nodes with what is done
for DK boards.
Change-Id: I91be408ea1d9b0474caf4965175df33792b7e11e
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Set Ethernet source clock on PLL4P. This is required to enable PTP.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ia64fbb681d3f04f2b90f373c5eb044f5daa2836c
Cleanup the BL2 device tree file by removing the nodes for the devices
that are not used to boot, depending on compilation flags.
In SDMMC boot, the gain for the dtb file is about 2.3kB.
Change-Id: I3ba13e06dd22b52cff96f51db2dac94b532c81ae
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The kilohertz unit abbreviation should read 'kHz' in DDR
settings files of stm32mp15.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Ifa363094f58dd943ef78c653c3e470a216739b41
Move the generic part of DDR node in SOC dtsi file.
DDR dtsi files only include the part configured by CubeMX tool.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
Change-Id: I8c211e9782604da32aeaab98d0ef75fb1cd9c58d
This change essentially reverts [1] by removing the BL31 workaround
forcing the dtb address when Hafnium is loaded as an Hypervisor.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/9569
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I302161d027261448113c66b7fafa9c11620b54ef
This change enables MPMM and adds, to the TC firmware configuration
device tree, the AMU counters representing the "gears" for the
Maximum Power Mitigation Mechanism feature of the Cortex-X2,
Cortex-A710 and Cortex-A510:
- Gear 0: throttle medium and high bandwidth vector and viruses.
- Gear 1: throttle high bandwidth vector and viruses.
- Gear 2: throttle power viruses only.
This ensures these counters are enabled and context-switched as
expected.
Change-Id: I6df6e0fe3a5362861aa967a78ab7c34fc4bb8fc3
Signed-off-by: Chris Kay <chris.kay@arm.com>
MPMM - the Maximum Power Mitigation Mechanism - is an optional
microarchitectural feature present on some Armv9-A cores, introduced
with the Cortex-X2, Cortex-A710 and Cortex-A510 cores.
MPMM allows the SoC firmware to detect and limit high activity events
to assist in SoC processor power domain dynamic power budgeting and
limit the triggering of whole-rail (i.e. clock chopping) responses to
overcurrent conditions.
This feature is enabled via the `ENABLE_MPMM` build option.
Configuration can be done via FCONF by enabling `ENABLE_MPMM_FCONF`, or
by via the plaform-implemented `plat_mpmm_topology` function.
Change-Id: I77da82808ad4744ece8263f0bf215c5a091c3167
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change makes AMU auxiliary counters configurable on a per-core
basis, controlled by `ENABLE_AMU_AUXILIARY_COUNTERS`.
Auxiliary counters can be described via the `HW_CONFIG` device tree if
the `ENABLE_AMU_FCONF` build option is enabled, or the platform must
otherwise implement the `plat_amu_topology` function.
A new phandle property for `cpu` nodes (`amu`) has been introduced to
the `HW_CONFIG` specification to allow CPUs to describe the view of
their own AMU:
```
cpu0: cpu@0 {
...
amu = <&cpu0_amu>;
};
```
Multiple cores may share an `amu` handle if they implement the
same set of auxiliary counters.
AMU counters are described for one or more AMUs through the use of a new
`amus` node:
```
amus {
cpu0_amu: amu-0 {
#address-cells = <1>;
#size-cells = <0>;
counter@0 {
reg = <0>;
enable-at-el3;
};
counter@n {
reg = <n>;
...
};
};
};
```
This structure describes the **auxiliary** (group 1) AMU counters.
Architected counters have architecturally-defined behaviour, and as
such do not require DTB entries.
These `counter` nodes support two properties:
- The `reg` property represents the counter register index.
- The presence of the `enable-at-el3` property determines whether
the firmware should enable the counter prior to exiting EL3.
Change-Id: Ie43aee010518c5725a3b338a4899b0857caf4c28
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change adds some documentation on the AMU and its purpose. This is
expanded on in later patches.
Change-Id: If2834676790938d8da5ea2ceba37b674f6cc0f01
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change represents a general refactoring to clean up old code that
has been adapted to account for changes required to enable dynamic
auxiliary counters.
Change-Id: Ia85e0518f3f65c765f07b34b67744fc869b9070d
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change decouples the group 1 counter macros to facilitate dynamic
detection at runtime. These counters remain disabled - we will add
dynamic enablement of them in a later patch.
Change-Id: I820d05f228d440643bdfa308d030bd51ebc0b35a
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change removes the `AMU_GROUP0_COUNTERS_MASK` and
`AMU_GROUP0_MAX_COUNTERS` preprocessor definitions, instead retrieving
the number of group 0 counters dynamically through `AMCGCR_EL0.CG0NC`.
Change-Id: I70e39c30fbd5df89b214276fac79cc8758a89f72
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change reduces preprocessor dependencies on the
`AMU_GROUP1_NR_COUNTERS` and `AMU_GROUP1_COUNTERS_MASK` definitions, as
these values will eventually be discovered dynamically.
In their stead, we introduce the `ENABLE_AMU_AUXILIARY_COUNTERS` build
option, which will enable support for dynamically detecting and
enabling auxiliary AMU counters.
This substantially reduces the amount of memory used by platforms that
know ahead of time that they do not have any auxiliary AMU counters.
Change-Id: I3d998aff44ed5489af4857e337e97634d06e3ea1
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change introduces a small set of register getters and setters to
avoid having to repeatedly mask and shift in complex code.
Change-Id: Ia372f60c5efb924cd6eeceb75112e635ad13d942
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change reduces the exposed surface area of the AMU API in order to
simplify the refactoring work in following patches. The functions and
definitions privatized by this change are not used by other parts of the
code-base today.
BREAKING CHANGE: The public AMU API has been reduced to enablement only
to facilitate refactoring work. These APIs were not previously used.
Change-Id: Ibf6174fb5b3949de3c4ba6847cce47d82a6bd08c
Signed-off-by: Chris Kay <chris.kay@arm.com>
With the introduction of MPMM, the auxiliary AMU counter logic requires
refactoring to move away from a single platform-defined group 1 counter
mask in order to support microarchitectural (per-core) group 1 counters.
BREAKING CHANGE: The `PLAT_AMU_GROUP1_COUNTERS_MASK` platform definition
has been removed. Platforms should specify per-core AMU counter masks
via FCONF or a platform-specific mechanism going forward.
Change-Id: I1e852797c7954f92409222b066a1ae57bc72bb05
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change introduces the `amu.mk` Makefile, used to remove the need
to manually include AMU sources into the various build images.
Makefiles requiring the list of AMU sources are expected to include
this file and use `${AMU_SOURCES}` to retrieve them.
Change-Id: I3d174033ecdce6439a110d776f0c064c67abcfe0
Signed-off-by: Chris Kay <chris.kay@arm.com>
Including the FCONF Makefile today automatically places the FCONF
sources into the source list of the BL1 and BL2 images. This may be
undesirable if, for instance, FCONF is only required for BL31.
This change moves the BL1 and BL2 source appends out of the common
Makefile to where they are required.
BREAKING CHANGE: FCONF is no longer added to BL1 and BL2 automatically
when the FCONF Makefile (`fconf.mk`) is included. When including this
Makefile, consider whether you need to add `${FCONF_SOURCES}` and
`${FCONF_DYN_SOURCES}` to `BL1_SOURCES` and `BL2_SOURCES`.
Change-Id: Ic028eabb7437ae95a57c5bcb7821044d31755c77
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change adds a new utility function - `fdtw_for_each_cpu` - to
invoke a callback for every CPU node listed in a flattened device tree
(FDT) with the node identifier and the MPIDR of the core it describes.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Iabb5c0f0c9d11928a4a7a41cdc7d1e09aadeb2bc
This has been introduced to simplify dependencies on the FDT wrappers.
We generally want to avoid pulling in components on a file-by-file
basis, particularly as we are trying to draw conceptual boxes around
components in preparation for transitioning the build system to CMake,
where dependencies are modelled on libraries rather than files.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Idb7ee05a9b54a8caa3e07f36e608867e20b6dcd5
Deduplicating sources prevents the build system from complaining about
multiply-compiled files, which can happen if multiple makefiles depend
on a component. This already occurs for BL31.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Ic9e67932550f07cb9e4d199f68bc46c33a611748
Deduplicating sources prevents the build system from complaining about
multiply-compiled files, which can happen if multiple makefiles depend
on a component. This already occurs for BL31.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: I9b40402f6f04600061fba7d6ad5d222a71e7d4a7
Joanna Farley
Soby Mathew
Maksims Svecovs
Madhukar Pappireddy
Manish Pandey
Yann Gautier
Chris Kay
Patrick Delaunay
Patrick Delaunay
johpow01
Yann Gautier
Nicolas Le Bayon
Sandrine Bailleux
Olivier Deprez