There are no references to AARCH32, AARCH64 and
__ASSEMBLY__ macros in the TF-A code hence
removed the deprecated information mentioning about
these macros in the document.
Change-Id: I472ab985ca2e4173bae23ff7b4465a9b60bc82eb
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Updated tentative code freeze and release target date
for v2.5 release.
Change-Id: Idcfd9a127e9210846370dfa0685badac5b1c25c7
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Updated code freeze and release information date for v2.4
release.
Change-Id: I76d5d04d0ee062a350f6a693eb04c29017d8b2e0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
For building fip image it is not needed to build target mrvl_flash. This
fip image contains only bl2, bl31 and bl33 (u-boot.bin) images and
therefore it does not depend on Marvell wtmi and wtp A3700-utils.
So remove mrvl_flash dependency for fip target to allow building fip image
without need to build mrvl_flash and therefore specify and provide Marvell
wmi and wtp A3700-utils.
This changes fixes compilation of fip image for A3700 platform by command:
make CROSS_COMPILE=aarch64-linux-gnu- BL33=/path/u-boot/u-boot.bin \
DEBUG=0 LOG_LEVEL=0 USE_COHERENT_MEM=0 PLAT=a3700 fip
Marvell boot image can be still build by 'mrvl_flash' target.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iba9a9da5be6fd1da23407fc2d490aedcb1a292c9
implementation of SMC call SMCCC_ARCH_SOC_ID
adding debugging logs in mem assign call.
Checking range of param in mem_assign call is from CB_MEM_RAM
or CB_MEM_RESERVED.
Change-Id: Iba51bff154df01e02dcb7715582ffaff7beba26e
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Some of targets (e.g. mrvl_flash) depends on WTP build option. Other
targets (e.g. fip) can be build also without WTP build option as they do
not depend on it.
This change put all A3720 variables and targets which depends on WTP into
conditional if-endif section, so they are not defined when user has not
supplied WTP build option.
Target mrvl_flash is defined also when WTP was not specified and in this
case it just print error message to help user.
Variables which do not depend on WTP are moved to the top of
a3700_common.mk file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Idb3892233586a0afca3e0e6564279641d2e4b960
Without this node, the board fails to boot and panics in the function
stm32mp_init_auth().
Change-Id: Ia54924410dac2a8c94dd6e45d7e93977fe7d87e2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The board information values, read in an OTP are never negative,
%u is then used instead of %d.
Change-Id: I3bc22401fb4d54666ddf56411f75b79aca738492
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* changes:
docs: update STM32MP1 with versions details
stm32mp1: get peripheral base address from a define
stm32mp1: add finished good variant in board identifier
After introducing the new STM32MP1 SoC versions in patch [1], the
document describing STM32MP1 platform is updated with the information
given in the patch commit message.
[1]: stm32mp1: add support for new SoC profiles
Change-Id: I6d7ce1a3c29678ddac78a6685f5d5daf28c3c3a1
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2b702698d6be93da5ac86da1cbc98b3838315a5a
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Update to support new part numbers.
Add new STM32 MPUs Part = STM32MP151F, STM32MP153F, STM32MP157F,
STM32MP151D, STM32MP153D, STM32MP157D
The STM32MP1 series is available in 3 different lines which are pin-to-pin
compatible:
- STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz,
3D GPU, DSI display interface and CAN FD
- STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz
and CAN FD
- STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz
Each line comes with a security option (cryptography & secure boot)
& a Cortex-A frequency option :
- A Basic + Cortex-A7 @ 650 MHz
- C Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
- D Basic + Cortex-A7 @ 800 MHz
- F Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz
Remove useless variable in stm32mp_is_single_core().
Change-Id: Id30c836af986c6340c91efa8a7ae9480a2827089
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add a new revision of STM32MP15x CPU (Rev.Z).
Change-Id: I227dd6d9b3fcc43270015cfb21f60aeb0a8ab658
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Retrieve peripheral base address from a define instead of
parsing the device tree. The goal is to improve execution time.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2588c53ad3d4abcc3d7fe156458434a7940dd72b
Update the board info with the new coding including the finished good
variant:
Board: MBxxxx Var<CPN>.<FG> Rev.<Rev>-<BOM>
The OTP 59 coding is:
bit [31:16] (hex) => MBxxxx
bit [15:12] (dec) => Variant CPN (1....15)
bit [11:8] (dec) => Revision board (index with A = 1, Z = 26)
bit [7:4] (dec) => Variant FG : finished good (NEW)
bit [3:0] (dec) => BOM (01, .... 255)
Change-Id: I4fbc0c84596419d1bc30d166311444ece1d9123f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Usually, C has no problem up-converting types to larger bit sizes. MISRA
rule 10.7 requires that you not do this, or be very explicit about this.
This resolves the following required rule:
bl1/aarch64/bl1_context_mgmt.c:81:[MISRA C-2012 Rule 10.7 (required)]<None>
The width of the composite expression "0U | ((mode & 3U) << 2U) | 1U |
0x3c0U" (32 bits) is less that the right hand operand
"18446744073709547519ULL" (64 bits).
This also resolves MISRA defects such as:
bl2/aarch64/bl2arch_setup.c:18:[MISRA C-2012 Rule 12.2 (required)]
In the expression "3U << 20", shifting more than 7 bits, the number
of bits in the essential type of the left expression, "3U", is
not allowed.
Further, MISRA requires that all shifts don't overflow. The definition of
PAGE_SIZE was (1U << 12), and 1U is 8 bits. This caused about 50 issues.
This fixes the violation by changing the definition to 1UL << 12. Since
this uses 32bits, it should not create any issues for aarch32.
This patch also contains a fix for a build failure in the sun50i_a64
platform. Specifically, these misra fixes removed a single and
instruction,
92407e73 and x19, x19, #0xffffffff
from the cm_setup_context function caused a relocation in
psci_cpus_on_start to require a linker-generated stub. This increased the
size of the .text section and caused an alignment later on to go over a
page boundary and round up to the end of RAM before placing the .data
section. This sectionn is of non-zero size and therefore causes a link
error.
The fix included in this reorders the functions during link time
without changing their ording with respect to alignment.
Change-Id: I76b4b662c3d262296728a8b9aab7a33b02087f16
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Chip select is retrieved from device tree and check
must be done regarding the MAX_CS defined.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Reviewed-by: Christophe KERELLO <christophe.kerello@st.com>
Change-Id: I03144b133bd51a845a4794f0f6bbd9402fc04936
FMC node bindings are modified to add EBI controller node.
FMC driver and associated device tree files are modified
to support these new bindings.
Change-Id: I4bf201e96a1aca20957e0dac3a3b87caadd05bdc
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Removed unused macro AARCH32 and AARCH64 from makefile
Change-Id: I6729e300f18d66dd7c6978d3bbd5a88937839c31
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch adds default value of 'sha256' for HASH_ALG
build flag to 'make_helpers\defaults.mk', according to
'docs\getting_started\build-options.rst'.
This fixes Measured Boot driver error when TF-A uses
default HASH_ALG value and TPM_HASH_ALG is set to
sha384 or sha512.
Change-Id: Id0aa34b54807de0adaf88e5f7d7032577c22f365
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Add information about 2GB variant of EspressoBin V5 and use Marvell git
branches which contain required fixes for EspressoBin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I1db510f1576f4762259ad7b0c10024b8ab434a59
In the function gicv2_set_spi_routing, the signed value proc_num is cast
to unsigned int before being compared to other unsigned values in two
assert calls. The value proc_num can be a negative value, and once the
negative value is cast to unsigned it becomes a very large number which
will trigger the assert. This patch changes the assert cast so that the
unsigned values are cast to signed instead, keeping the same functionality
but allowing proc_num to be negative.
This bug can be seen when running the SDEI RM_ANY routing mode test in
TFTF on the Juno platform.
This patch also makes the usage of the proc_num variable in other gicv2
functions more clear.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: If1b98eebb00bd9b73862e5e995e5e68c168170a6
And from crash_console_flush.
We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.
Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
This patch updates the MIDR value for rainier cpu.
Change-Id: I99a5d96f757239cf65b2688095c4ec66cd991cf9
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Remove some useless extra tabs or spaces.
Replace some spaces with tabs.
Change-Id: I0e8e2a1a1be7a1109ba7f3e3ae35e3fe1b5b4552
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Alexei Fedorov
Joanna Farley
Madhukar Pappireddy
Mark Dykes
Manish V Badarkhe
Pali Rohár
Manish Pandey
Saurabh Gorecha
Yann Gautier
Nicolas Le Bayon
Lionel Debieve
Patrick Delaunay
Jimmy Brisson
Christophe Kerello
johpow01
Lauren Wehrmeister
Jagadeesh Ujja