A new config, ENABLE_NS_L2_CPUECTRL_RW_ACCESS, allows Tegra platforms to
enable read/write access to the L2 and CPUECTRL registers. T210 is the
only platform that needs to enable this config for now.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch locks access to the PMC registers which hold the CPU reset
vector addresses. The PMC registers are used by the warmboot code and
must be locked during boot/resume to avoid booting into custom firmware
installed by unknown parties e.g. hackers.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The PMC Scratch22 register contains the CPU reset vector to
be used by the warmboot code to power up the CPU while resuming
from system suspend. This patch locks this PMC register to avoid
any further writes.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch checks if the target CPU is already online before
proceeding with it's power ON sequence.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch de-asserts the CPU reset signals for each CPU as
part of it's power on sequence. This is needed to get rid of
the wait in BPMP firmware during SC7 exit.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the delay loop used to wake up the BPMP during SC7 exit.
The earlier loop would fail just when the timer was about to wrap-around
(e.g. when TEGRA_TMRUS_BASE is 0xfffffffe, the target value becomes 0,
which would cause the loop to exit before it's expiry).
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch introduces the backend required for implementing the delay
timer API. Tegra has an on-chip free flowing us timer which can be
used as the delay timer.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch sets the 'USE_COHERENT_MEM' flag to '0', so that the
coherent memory region will not be included in the memory map.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements the get_sys_suspend_power_state() handler required by
the PSCI SYSTEM_SUSPEND API. The intent of this handler is to return the
appropriate State-ID field which can be utilized in `affinst_suspend()` to
suspend to system affinity level.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Some Linux distributions include an OpenSSL library which has been
built without ECDSA support. Trying to build the certificate
generation tool on those distributions will result in a build error.
This patch fixes that issue by including ECDSA support only if
OpenSSL has been built with ECDSA. In that case, the OpenSSL
configuration file does not define the OPENSSL_NO_EC macro. The tool
will build successfully, although the resulting binary will not
support ECDSA keys.
Change-Id: I4627d1abd19eef7ad3251997d8218599187eb902
This patch updates the user guide, adding instructions to build the
Trusted Firmware with Trusted Board Support using the new framework.
It also provides documentation about the framework itself, including
a detailed section about the TBBR implementation using the framework.
Change-Id: I0849fce9c5294cd4f52981e7a8423007ac348ec6
The authentication framework deprecates plat_match_rotpk()
in favour of plat_get_rotpk_info(). This patch removes
plat_match_rotpk() from the platform port.
Change-Id: I2250463923d3ef15496f9c39678b01ee4b33883b
After updating the main authentication module to use the transport
and crypto modules and the CoT description, the PolarSSL
authentication module is no longer required. This patch deletes it.
Change-Id: I8ba1e13fc1cc7b2fa9df14ff59eb798f0460b878
This patch modifies the Trusted Board Boot implementation to use
the new authentication framework, making use of the authentication
module, the cryto module and the image parser module to
authenticate the images in the Chain of Trust.
A new function 'load_auth_image()' has been implemented. When TBB
is enabled, this function will call the authentication module to
authenticate parent images following the CoT up to the root of
trust to finally load and authenticate the requested image.
The platform is responsible for picking up the right makefiles to
build the corresponding cryptographic and image parser libraries.
ARM platforms use the mbedTLS based libraries.
The platform may also specify what key algorithm should be used
to sign the certificates. This is done by declaring the 'KEY_ALG'
variable in the platform makefile. FVP and Juno use ECDSA keys.
On ARM platforms, BL2 and BL1-RW regions have been increased 4KB
each to accommodate the ECDSA code.
REMOVED BUILD OPTIONS:
* 'AUTH_MOD'
Change-Id: I47d436589fc213a39edf5f5297bbd955f15ae867
This patch extends the 'cert_create' tool to support ECDSA keys
to sign the certificates. The '--key-alg' command line option
can be used to specify the key algorithm when invoking the tool.
Available options are:
* 'rsa': create RSA-2048 keys (default option)
* 'ecdsa': create ECDSA-SECP256R1 keys
The TF Makefile has been updated to allow the platform to specify
the key algorithm by declaring the 'KEY_ALG' variable in the
platform makefile.
The behaviour regarding key management has changed. After applying
this patch, the tool will try first to open the keys from disk. If
one key does not exist or no key is specified, and the command line
option to create keys has been specified, new keys will be created.
Otherwise an error will be generated and the tool will exit. This
way, the user may specify certain keys while the tool will create
the remaining ones. This feature is useful for testing purposes
and CI infrastructures.
The OpenSSL directory may be specified using the build option
'OPENSSL_DIR' when building the certificate generation tool.
Default is '/usr'.
Change-Id: I98bcc2bfab28dd7179f17f1177ea7a65698df4e7
This patch adds a CoT based on the Trusted Board Boot Requirements
document*. The CoT consists of an array of authentication image
descriptors indexed by the image identifiers.
A new header file with TBBR image identifiers has been added.
Platforms that use the TBBR (i.e. ARM platforms) may reuse these
definitions as part of their platform porting.
PLATFORM PORT - IMPORTANT:
Default image IDs have been removed from the platform common
definitions file (common_def.h). As a consequence, platforms that
used those common definitons must now either include the IDs
provided by the TBBR header file or define their own IDs.
*The NVCounter authentication method has not been implemented yet.
Change-Id: I7c4d591863ef53bb0cd4ce6c52a60b06fa0102d5
This patch adds the following mbedTLS based libraries:
* Cryptographic library
It is used by the crypto module to verify a digital signature
and a hash. This library relies on mbedTLS to perform the
cryptographic operations. mbedTLS sources must be obtained
separately.
Two key algorithms are currently supported:
* RSA-2048
* ECDSA-SECP256R1
The platform is responsible for picking up the required
algorithm by defining the 'MBEDTLS_KEY_ALG' variable in the
platform makefile. Available options are:
* 'rsa' (for RSA-2048) (default option)
* 'ecdsa' (for ECDSA-SECP256R1)
Hash algorithm currently supported is SHA-256.
* Image parser library
Used by the image parser module to extract the authentication
parameters stored in X509v3 certificates.
Change-Id: I597c4be3d29287f2f18b82846973afc142ee0bf0
This patch adds the authentication framework that will be used as
the base to implement Trusted Board Boot in the Trusted Firmware.
The framework comprises the following modules:
- Image Parser Module (IPM)
This module is responsible for interpreting images, check
their integrity and extract authentication information from
them during Trusted Board Boot.
The module currently supports three types of images i.e.
raw binaries, X509v3 certificates and any type specific to
a platform. An image parser library must be registered for
each image type (the only exception is the raw image parser,
which is included in the main module by default).
Each parser library (if used) must export a structure in a
specific linker section which contains function pointers to:
1. Initialize the library
2. Check the integrity of the image type supported by
the library
3. Extract authentication information from the image
- Cryptographic Module (CM)
This module is responsible for verifying digital signatures
and hashes. It relies on an external cryptographic library
to perform the cryptographic operations.
To register a cryptographic library, the library must use the
REGISTER_CRYPTO_LIB macro, passing function pointers to:
1. Initialize the library
2. Verify a digital signature
3. Verify a hash
Failing to register a cryptographic library will generate
a build time error.
- Authentication Module (AM)
This module provides methods to authenticate an image, like
hash comparison or digital signatures. It uses the image parser
module to extract authentication parameters, the crypto module
to perform cryptographic operations and the Chain of Trust to
authenticate the images.
The Chain of Trust (CoT) is a data structure that defines the
dependencies between images and the authentication methods
that must be followed to authenticate an image.
The Chain of Trust, when added, must provide a header file named
cot_def.h with the following definitions:
- COT_MAX_VERIFIED_PARAMS
Integer value indicating the maximum number of authentication
parameters an image can present. This value will be used by the
authentication module to allocate the memory required to load
the parameters in the image descriptor.
Change-Id: Ied11bd5cd410e1df8767a1df23bb720ce7e58178
This patch extends the platform port by adding an API that returns
either the Root of Trust public key (ROTPK) or its hash. This is
usually stored in ROM or eFUSE memory. The ROTPK returned must be
encoded in DER format according to the following ASN.1 structure:
SubjectPublicKeyInfo ::= SEQUENCE {
algorithm AlgorithmIdentifier,
subjectPublicKey BIT STRING
}
In case the platform returns a hash of the key:
DigestInfo ::= SEQUENCE {
digestAlgorithm AlgorithmIdentifier,
keyDigest OCTET STRING
}
An implementation for ARM development platforms is provided in this
patch. When TBB is enabled, the ROTPK hash location must be specified
using the build option 'ARM_ROTPK_LOCATION'. Available options are:
- 'regs' : return the ROTPK hash stored in the Trusted
root-key storage registers.
- 'devel_rsa' : return a ROTPK hash embedded in the BL1 and
BL2 binaries. This hash has been obtained from the development
RSA public key located in 'plat/arm/board/common/rotpk'.
On FVP, the number of MMU tables has been increased to map and
access the ROTPK registers.
A new file 'board_common.mk' has been added to improve code sharing
in the ARM develelopment platforms.
Change-Id: Ib25862e5507d1438da10773e62bd338da8f360bf
The Trusted firmware code identifies BL images by name. The platform
port defines a name for each image e.g. the IO framework uses this
mechanism in the platform function plat_get_image_source(). For
a given image name, it returns the handle to the image file which
involves comparing images names. In addition, if the image is
packaged in a FIP, a name comparison is required to find the UUID
for the image. This method is not optimal.
This patch changes the interface between the generic and platform
code with regard to identifying images. The platform port must now
allocate a unique number (ID) for every image. The generic code will
use the image ID instead of the name to access its attributes.
As a result, the plat_get_image_source() function now takes an image
ID as an input parameter. The organisation of data structures within
the IO framework has been rationalised to use an image ID as an index
into an array which contains attributes of the image such as UUID and
name. This prevents the name comparisons.
A new type 'io_uuid_spec_t' has been introduced in the IO framework
to specify images identified by UUID (i.e. when the image is contained
in a FIP file). There is no longer need to maintain a look-up table
[iname_name --> uuid] in the io_fip driver code.
Because image names are no longer mandatory in the platform port, the
debug messages in the generic code will show the image identifier
instead of the file name. The platforms that support semihosting to
load images (i.e. FVP) must provide the file names as definitions
private to the platform.
The ARM platform ports and documentation have been updated accordingly.
All ARM platforms reuse the image IDs defined in the platform common
code. These IDs will be used to access other attributes of an image in
subsequent patches.
IMPORTANT: applying this patch breaks compatibility for platforms that
use TF BL1 or BL2 images or the image loading code. The platform port
must be updated to match the new interface.
Change-Id: I9c1b04cb1a0684c6ee65dee66146dd6731751ea5
Using assert() to check the length of keys and hashes included in
a certificate is not a safe approach because assert() only applies
to debug builds. A malformed certificate could exploit security
flaws in release binaries due to buffer overflows.
This patch replaces assert() with runtime checkings in the PolarSSL
authentication module, so malformed certificates can not cause a
memory overflow.
Change-Id: I42ba912020595752c806cbd242fe3c74077d993b
The cert_create tool calculates the hash of each BL image and includes
it as an ASN.1 OCTET STRING in the corresponding certificate extension.
Without additional information, the firmware running on the platform
has to know in advance the algorithm used to generate the hash.
This patch modifies the cert_create tool so the certificate extensions
that include an image hash are generated according to the following
ASN.1 structure:
DigestInfo ::= SEQUENCE {
digestAlgorithm AlgorithmIdentifier,
digest OCTET STRING
}
AlgorithmIdentifier ::= SEQUENCE {
algorithm OBJECT IDENTIFIER,
parameters ANY DEFINED BY algorithm OPTIONAL
}
The PolarSSL module has been updated to extract the image hash
from the certificate extension according to this structure.
Change-Id: I6d83430f12a8a0eea8447bec7c936e903f644c85
This patch adds a boolean build option 'SAVE_KEYS' to indicate the
certificate generation tool that it must save the private keys used
to establish the chain of trust. This option depends on 'CREATE_KEYS'
to be enabled. Default is '0' (do not save).
Because the same filenames are used as outputs to save the keys,
they are no longer a dependency to the cert_tool. This dependency
has been removed from the Makefile.
Documentation updated accordingly.
Change-Id: I67ab1c2b1f8a25793f0de95e8620ce7596a6bc3b
This patch fixes the build time condition deciding whether the
read-write data should be relocated from ROM to RAM. It was incorrectly
using __DATA_ROM_START__, which is a linker symbol and not a compiler
build flag. As a result, the relocation code was always compiled out.
This bug has been introduced by the following patch:
"Rationalize reset handling code"
Change-Id: I1c8d49de32f791551ab4ac832bd45101d6934045
This patch adds support for SYSTEM_SUSPEND API as mentioned in the PSCI 1.0
specification. This API, on being invoked on the last running core on a
supported platform, will put the system into a low power mode with memory
retention.
The psci_afflvl_suspend() internal API has been reused as most of the actions
to suspend a system are the same as invoking the PSCI CPU_SUSPEND API with the
target affinity level as 'system'. This API needs the 'power state' parameter
for the target low power state. This parameter is not passed by the caller of
the SYSTEM_SUSPEND API. Hence, the platform needs to implement the
get_sys_suspend_power_state() platform function to provide this information.
Also, the platform also needs to add support for suspending the system to the
existing 'plat_pm_ops' functions: affinst_suspend() and
affinst_suspend_finish().
Change-Id: Ib6bf10809cb4e9b92f463755608889aedd83cef5
In order to handle secure/non-secure interrupts, overload the plat_ic_*
functions and copy GIC helper functions from arm_gic.c. Use arm_gic.c
as the reference to add Tegra's GIC helper functions.
Now that Tegra has its own GIC implementation, we have no use for
plat_gic.c and arm_gic.c files.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The validation of the caching enable state in bl1_main() was
incorrect resulting in the state not being checked. Using the right
operator fixes this.
Change-Id: I2a99478f420281a1dcdf365d3d4fd8394cd21b51
mpidr_set_aff_inst() is left shifting an int constant and an
unsigned char value to construct an MPIDR. For affinity level 3 a
shift of 32 would result in shifting out of the 32-bit type and
have no effect on the MPIDR.
These values need to be extended to unsigned long before shifting
to ensure correct results for affinity level 3.
Change-Id: I1ef40afea535f14cfd820c347a065a228e8f4536
Add SP804 delay timer support to the FVP BSP.
This commit simply provides the 3 constants needed by the SP804
delay timer driver and calls sp804_timer_init() in
bl2_platform_setup(). The BSP does not currently use the delay
timer functions.
Note that the FVP SP804 is a normal world accessible peripheral
and should not be used by the secure world after transition
to the normal world.
Change-Id: I5f91d2ac9eb336fd81943b3bb388860dfb5f2b39
Co-authored-by: Dan Handley <dan.handley@arm.com>
Add a delay timer driver for the ARM SP804 dual timer.
This driver only uses the first timer, called timer 1 in the
SP804 Technical Reference Manual (ARM DDI 0271D).
To use this driver, the BSP must provide three constants:
* The base address of the SP804 dual timer
* The clock multiplier
* The clock divider
The BSP is responsible for calling sp804_timer_init(). The SP804
driver instantiates a constant timer_ops_t and calls the generic
timer_init().
Change-Id: I49ba0a52bdf6072f403d1d0a20e305151d4bc086
Co-authored-by: Dan Handley <dan.handley@arm.com>
The API is simple. The BSP or specific timer driver creates an
instance of timer_ops_t, fills in the timer specific data, then calls
timer_init(). The timer specific data includes a function pointer
to return the timer value and a clock multiplier/divider. The ratio
of the multiplier and the divider is the clock frequency in MHz.
After that, mdelay() or udelay() can be called to delay execution for
the specified time (milliseconds or microseconds, respectively).
Change-Id: Icf8a295e1d25874f789bf28b7412156329dc975c
Co-authored-by: Dan Handley <dan.handley@arm.com>
This patch adds support to reserve a memory carveout region in the
DRAM on Tegra SoCs. The memory controller provides specific registers
to specify the aperture's base and size. This aperture can also be
changed dynamically in order to re-size the memory available for
DRM video playback. In case of the new aperture not overlapping
the previous one, the previous aperture has to be cleared before
setting up the new one. This means we do not "leak" any video data
to the NS world.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to run a Trusted OS during boot time. The
previous stage bootloader passes the entry point information in
the 'bl32_ep_info' structure, which is passed over to the SPD.
The build system expects the dispatcher to be passed as an input
parameter using the 'SPD=<dispatcher>' option. The Tegra docs have
also been updated with this information.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
For CSS based platforms, the constants MHU_SECURE_BASE and
MHU_SECURE_SIZE used to define the extents of the Trusted Mailboxes.
As such, they were misnamed because the mailboxes are completely
unrelated to the MHU hardware.
This patch removes the MHU_SECURE_BASE and MHU_SECURE_SIZE #defines.
The address of the Trusted Mailboxes is now relative to the base of
the Trusted SRAM.
This patch also introduces a new constant, SCP_COM_SHARED_MEM_BASE,
which is the address of the first memory region used for communication
between AP and SCP. This is used by the BOM and SCPI protocols.
Change-Id: Ib200f057b19816bf05e834d111271c3ea777291f
Add a comment explaining what the SCP boot configuration information
is on CSS based platforms like Juno. Also express its address
relatively to the base of the Trusted SRAM rather than hard-coding it.
Change-Id: I82cf708a284c8b8212933074ea8c37bdf48b403b
Varun Wadekar
Achin Gupta
danh-arm
Juan Castillo
Sandrine Bailleux
Soby Mathew
Andrew Thoelke
Ryan Harkin