TZC is being replaced by MSF module on TC3. For fixing boot failure on
TC3, don't enable TZC module on the TC3 platform.
Change-Id: I4434cb28bf523be8dd882f5f8799223642822ee2
Signed-off-by: Tintu Thomas <tintu.thomas@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
load_mbr_header() casts an unaligned pointer to (mbr_entry_t *) then
dereferences struct members with non-trivial alignment requirements.
This causes a bl2 with BOOT_DEVICE=emmc to hang when compiled with clang
18.1.5, although it works when compiled with gcc 14.1.0. Presumably gcc's
-mstrict-align papers over the undefined behaviour whereas clang's doesn't.
Replace the unaligned cast with a safe memcpy() into an mbr_entry_t.
Signed-off-by: Chris Webb <chris@arachsys.com>
Change-Id: Iefd4dac7e390ddf369b8dacdbaf14e599118f91d
Switch to xlat table v2 version to add support for dynamic mapping
which is not supported in xlat table v1. It can be used for run
time DT mapping. Also xlat table v1 version is going to be
deprecated that's why switch is necessary and removed unused xlat
table v1 macro from platform.mk.
With ENABLE_LTO enabled, size difference in OCM between xlat
table v2 and xlat table v1 release is 82193 - 82058 = 135 bytes.
Change-Id: Ifec2e75fb19670e83dc761fc40a8c4cd5ed9087b
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Signed-off-by: Maheedhar Bollapalli <MaheedharSai.Bollapalli@amd.com>
The target_locality attribute is meant to specify that
a certain SW component is expected to run and thereby
send DPE commands from a given security domain. The DPE
service must be capable of determining the locality of
a client on his own. RSE determines the client's locality
based on the MHU channel used for communication.
If the expected locality (specified by the parent component)
is not matching with the determined locality by DPE
service then command fails.
The goal is to protect against spoofing when a
context_handle is stolen and used by a component
that should not have access.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: I96d255de231611cfed10eef4335a47b91c2c94de
The new name is more generic. The goal to add here
all platform dependent defines / data / config which
is DPE related.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: I5b521932c45d8a9c43ea2344dde83c210801cfee
Add links to official STMicroelectronics documentation (STM32MP2
series presentation and wiki).
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I2fca0da56bc6064c222df34493921dff3e119a22
STM32MP25xA & STM32MP25xC versions run at 1.2GHz.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I75aea682c8e3fa89e7ac1347bb7f9d02f2086222
Add TC specific stubs for both soc_css_init_nic400 and
soc_css_init_pcie. We do not require any initialisation of these
components for TC platforms.
Change-Id: If0129acd1050a56878cb9c3041a033192c88da57
Signed-off-by: Jackson Cooper-Driver <jackson.cooper-driver@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
s32cc_init_early_clks will be used to increase the frequency of the
clocks which have a performance impact on BL2 boot. This set includes
A53, XBAR, DDR and Linflex clocks. For now, it will only contain the
frequency set for FXOSC. More clock management will be added in the next
commits.
Change-Id: Ie85465884de02f5082185f91749f190f40249c2e
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The set_rate callback will now be applied to FIRC, FXOSC, and SIRC
oscillators. It is a prerequisite for the upcoming commits that will
utilize this capability.
Change-Id: I82d1545c63b3e15497c1c002ff9ec0d7bf990aa0
Signed-off-by: Ciprian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Modify generic timer frequency by SCU setting
1. check SCU_CPU_HW_STRAP1 using HPLL or MPLL
SCU_CPU_HW_STRAP1[4]=1, using HPLL
SCU_CPU_HW_STRAP1[4]=0, using MPLL
2. read HPLL or MPLL
HPLL: frequency setting in SCU_CPU_HW_STRAP1[2:3]
MPLL: CLKIN_25M with mul and div setting from SCU_CPU_MPLL
Change-Id: I31eb10107b9da7c6746887ba36ead8ca61d86aae
Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
The oscillator clock objects will be used to describe the FIRC, FXOSC,
and SIRC clocks, all of which are oscillators on S32CC SoCs.
Change-Id: Icf235cc9b8f1d95d2c0051ce9a7655fd120289b8
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The clock IDs are organized into categories, which are determined based
on the first 2 MSB bits for each ID. Currently, there are two big
categories: hardware and software-defined clocks.
The first category refers to clock IDs understood by the S32CC PLL muxes
and MC_CGM module muxes and is immutable. The last category of the
clocks includes software-defined IDs for clocks to allow an easy
representation of the hierarchy.
Change-Id: Idc079feb3ca5f92d8bf337ef09efad006e267088
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
This change avoids generating a build message source file on the shell,
instead using the `__DATE__` and `__TIME__` macros directly.
Change-Id: Ida537d4c3e550f2fbbd977472ed6573491d17c23
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change avoids generating a build message source file on the shell,
instead using the `__DATE__` and `__TIME__` macros directly.
Change-Id: Ieda75bbac174847c716701bce8dd10b8e9975902
Signed-off-by: Chris Kay <chris.kay@arm.com>
After disabling assertion with -DENABLE_ASSERTIONS=0, the build reports
error:
drivers/arm/mhu/mhu_wrapper_v3_x.c: In function 'mhu_get_max_message_size':
drivers/arm/mhu/mhu_wrapper_v3_x.c:448:31: error: variable 'err' set but not used [-Werror=unused-but-set-variable]
enum mhu_v3_x_error_t err;
^~~
This commit fixes the building failure by making the variable 'err' as
__maybe_unused.
Change-Id: I338e6df03d2f0805c83e96d8e3a4abae41e68678
Signed-off-by: Leo Yan <leo.yan@arm.com>
To enable early clocks, such as A53, XBAR, and others, the clock driver
compilation should be included as part of the BL2 stage.
Change-Id: I17ba195d8c3cf3f91bd333a00d4a4af2f1f472b7
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
The S32CC is an umbrella for S32G2, S32G3 and S32R45 SoCs; therefore,
this clock driver will be used for all of these families.
Change-Id: Iede5371b212b67cf494a033c62fbfdcbe9b1a879
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
This driver manages the resets of the peripherals embedded in STM32MP2.
Like clock driver, it also uses the RCC peripheral.
Change-Id: I8217891bdf1b847925aad77f3f6ef542f08d1fba
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This driver manages the clocks on STM32MP2 platforms.
It uses a dedicated RCC (Reset and Clock Control) peripheral.
Change-Id: I6ba2173e73222269a2dfca4c6897229276a150c0
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Fix some clocks and reset binding values.
Change-Id: Ibe480aa77cd0abb63d08bbee08ad4ec9d5d2a397
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Add the system reset management into the stm32mp
reset driver.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I748f10de2398e1323160f479f99e92abd2f65dca
Fix the code related error message when user provides RESET_TO_BL31=1 to
the make command but fails to provide "ARM_PRELOADED_DTB_BASE" macro at
the same command line. Remove the line break from the error string
causing the code error.
Additionally, make doesn't parse quote marks in strings, thus remove
quote marks within error strings in this file.
Change-Id: Ic131b6febebfb420ed588fe4fb0853cbdae0afb8
Signed-off-by: Salman Nabi <salman.nabi@arm.com>
Enabling Link Time Optimization in platform.mk for AMD-Xilinx
ZynqMP platform optimizes TF-A size.
With ENABLE_LTO=0, the release bl31.elf size is 86098.
With ENABLE_LTO=1, the release bl31.elf size reduces to 81866.
The size difference in OCM is 4232 bytes, saving up to 4KB.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Change-Id: I6d5001a9ac250e3a87b958e9b665962a917265d6
We have fdt_read_uint32_default() function which allows us to use less
temporary variables. Let make use of it where applicable.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Change-Id: I6fc8a87d5aac427703fd3c8b689e153ed58fa8b7
Madhukar Pappireddy
Manish V Badarkhe
Tintu Thomas
Chris Webb
Prasad Kummari
Tamas Ban
Manish Pandey
Yann Gautier
Nicolas Le Bayon
Jackson Cooper-Driver
Soby Mathew
Ghennadi Procopciuc
Kevin Chen
Yann Gautier
Chris Kay
Leo Yan
Gabriel Fernandez
André Przywara
Lionel Debieve
Salman Nabi
Govindraj Raja
Marcin Juszkiewicz
Olivier Deprez