Add parameters to fill header version:
Two new options are added (m and n) to fill header version major and minor.
The default is v1.0 (major = 1, minor = 0)
Fix image header on big endian hosts:
Three header fields are not properly converted to little endian
before assignment, resulting in incorrect header while executing
stm32image on big endian hosts.
Convert the value of the header fields version_number,
image_checksum and edcsa_algorithm to little endian before the
assignment.
Don't force the base of strtol, since it's able to select the base
automatically depending on the prefix of the value.
This does not breaks the current build script that extracts the
addresses, including the 0x prefix, from the map file.
This change helps using stm32image in shell scripts where the
addresses can be computed using the shell arithmetic expansion
"$((...))", that produces a value in base decimal.
The variable stm32image_header is declared with global visibility
but is use in one function only, move it as local variable in the function.
Fix error message on destination file:
The error message on mmap() failure of destination file reports
incorrectly information about the source file.
Change the error message to match the file that causes the error.
Change-Id: Iebc8c915297306845b3847b32f9516443a515c97
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Calling 'make clean' in 'all' target is causing recompilation of binary
at every 'make' call, which is wrong.
Also building a new target via 'make TARGET' can cause infinite loop as
it is not defined as explicit make dependency. Dependent targets must be
specified after colon when defining target, which also prevents infinite
loops as make is able to detect these circular dependencies.
Moreover calling 'make clean' is supposed to be done by user when
configuration is changing.
So remove calling 'make clean' in 'all' target and define dependency for
'${PROJECT}' at correct place.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I70e7fd2b04b02f6a0650c82df91d58c9a4cb24d9
NXP tool to create pbl from bl2 binary:
- RCW is prepended to BL2.bin
- If TRUSTED_BOARD_BOOT=1, pre-append the CSF header
to be understood by NXP boot-rom.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Iddc7336a045222e2073ddad86358ebc4440b8bcf
Generic framework is added to include platform defined UUID.
This framework is added for the following:
- All NXP SoC based platforms needed additional fip-fuse.bin
- NXP SoC lx2160a based platforms requires additional fip-ddr.bin
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ibe05d9c596256e34077287a490dfcd5b731ef2cf
Changes to 'tools/cert_create' folder, to include platform defined
certificates, keys, and extensions.
NXP SoC lx2160a : based platforms requires additional
FIP DDR to be loaded before initializing the DDR.
To enable chain of trust on these platforms, FIP DDR
image needs to be authenticated, additionally.
Platform specific folder 'tools/nxp/cert_create_helper'
is added to support platform specific macros and definitions.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I4752a30a9ff3aa1d403e9babe3a07ba0e6b2bf8f
This bug manifests itself as a segfault triggered by a double-free.
I noticed that right before the double-free, the sk list contained 2
elements with the same address.
(gdb) p sk_X509_EXTENSION_value(sk, 1)
$34 = (X509_EXTENSION *) 0x431ad0
(gdb) p sk_X509_EXTENSION_value(sk, 0)
$35 = (X509_EXTENSION *) 0x431ad0
(gdb) p sk_X509_EXTENSION_num(sk)
$36 = 2
This caused confusion; this should never happen.
I figured that this was caused by a ext_new_xxxx function freeing
something before it is added to the list, so I put a breakpoint on
each of them to step through. I was suprised to find that none of my
breakpoints triggered for the second element of the iteration through
the outer loop just before the double-free.
Looking through the code, I noticed that it's possible to avoid doing
a ext_new_xxxx, when either:
* ext->type == NVCOUNTER and ext->arg == NULL
* ext->type == HASH and ext->arg == NULL and ext->optional == false
So I put a breakpoint on both.
It turns out that it was the HASH version, but I added a fix for both.
The fix for the Hash case is simple, as it was a mistake. The fix for
the NVCOUNTER case, however, is a bit more subtle. The NVCOUNTER may
be optional, and when it's optional we can skip it. The other case,
when the NVCOUNTER is required (not optinal), the `check_cmd_params`
function has already verified that the `ext->arg` must be non-NULL.
We assert that before processing it to covert any possible segfaults
into more descriptive errors.
This should no longer cause double-frees by adding the same ext twice.
Change-Id: Idae2a24ecd964b0a3929e6193c7f85ec769f6470
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
The certification tool creates all the certificates mentioned
statically in the code rather than taking explicit certificate
requests from the command line parameters.
Code is optimized to avoid unnecessary attempts to create
non-requested certificates.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I78feac25bc701bf8f08c6aa5a2e1590bec92d0f2
Add tool support for creating bootparam and cert_header images
for RZ/G2 SoC based platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Iab8ba6eda442c8d75f23c5633b8178f86339e4c9
Don't depend on clean when building, as the user is capable of cleaning
if required and this introduces a race where "all" depends on both the
compile and the clean in parallel. It's quite possible for some of the
compile to happen in parallel with the clean, which results in the link
failing as objects just built are missing.
Change-Id: I710711eea7483cafa13251c5d94ec693148bd001
Signed-off-by: Ross Burton <ross.burton@arm.com>
When OpenSSL's macro allocates the HASH struct, it allocates the fields
as well. After this allocation, the prior code would assign over the
pointers inside the HASH struct, leaking these fields. This patch
avoids allocating extra copies of these members.
Change-Id: I50a38b0a04b52ec54d6388db0f694feb578d2818
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Previously, we would leak these extensions as they are not freed by the
stack. An except from the `sk_TYPE_free` documentation:
sk_TYPE_free() frees up the sk structure. It does not free up any
elements of sk. After this call sk is no longer valid.
The fix is to drain the stack and free its elements before freeing the
stack. sk_TYPE_pop_free does this, so we use that instead.
Change-Id: Ie70c302f9dda5af1a7243f163d36e99916ee639c
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Although support for building fiptool on a Windows host was present,
the binary was not built when the top level makefile was invoked.
This patch makes the necessary changes to the to support building of
fiptool on a Windows host PC from the main makefile.
Change-Id: I0c01ba237fa3010a027a1b324201131210cf4d7c
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Windows does not have a standard getopt implementation. To address
this an equivalent implementation has been provided in win_posix.c
However, the implementation has an issue with option processing as
described below.
Long option names may be abbreviated if the abbreviation is unique
or an exact match for some defined option.
Since some options can be substring of other options e.g. "scp-fw"
option is a substring of "scp-fwu-cfg", we need to identify if an
option is abbreviated and also check for uniqueness. Otherwise if
a user passes --scp-fw as an option, the "scp-fwu-cfg" option may
get selected, resulting in an incorrectly packaged FIP.
This issue has been be fixed by:
- First searching for an exact match.
- If exact match was not found search for a abbreviated match.
By doing this an incorrect option selection can be avoided.
Change-Id: I22f4e7a683f3df857f5b6f0783bf9b03a64a0bcc
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
This patch: fafd3ec9c assumes that tools must build from
the main makefile folder.
This assumption leads to the error when somebody wants to
build a tool from the tool's folder.
Hence changes are done to provide the default binary name
in the tool's makefile.
Change-Id: Iae570a7f8d322151376b6feb19e739300eecc3fc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Currently, the tool's makefile override the tool's binary name
which is already been defined in the main makefile.
Hence fix is provided so that the tool's makefile get the tool's
binary name from the main makefile instead of overriding it.
Change-Id: I8af2bd391a96bba2dbcddef711338a94ebf5f038
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
With recently introduced dualroot CoT for SPs where they are owned
either by SiP or by Platform. SiP owned SPs index starts at SP_PKG1_ID
while Plat owned SPs index starts at SP_PKG5_ID.
This patch modifies SP makefile generator script to take CoT as an
argument and if it is "dualroot" then generates SP_PKG in order
mentioned above, otherwise generates it sequentially.
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: Iffad1131787be650a9462f6f8cc09b603cddb3b8
Add support to generate a certificate named "plat-sp-cert" for Secure
Partitions(SP) owned by Platform.
Earlier a single certificate file "sip-sp-cert" was generated which
contained hash of all 8 SPs, with this change SPs are divided into
two categories viz "SiP owned" and "Plat owned" containing 4 SPs each.
Platform RoT key pair is used for signing.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I5bd493cfce4cf3fc14b87c8ed1045f633d0c92b6
If the user tries to change BUILD_BASE to put the build products outside
the build tree the compile will fail due to hard coded assumptions that
$BUILD_BASE is a relative path. Fix by using $(abspath $(BUILD_BASE))
to rationalize to an absolute path every time and remove the relative
path assumptions.
This patch also adds documentation that BUILD_BASE can be specified by
the user.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib1af874de658484aaffc672f30029b852d2489c8
Change the binary image alignment from 4 to 16.
The PKCS signature verification fails for unaligned images.
Change-Id: Ieb08dc3ea128790f542ad93e3c948117567a65af
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Replace deprecated mbedtls_sha256 with mbedtls_sha256_ret
The mbedtls_pk_parse_key does not work correctly anymore
with the DER buffer embedded in the secure image extentson
using the buffer size as the the key length.
Move to mbedtls_pk_parse_subpubkey API that handles such
case correctly.
The DER format already contains the key length, so there
is no particular reason to supply it to the key parser.
Update the doimage version to 3.3
Change-Id: I0ec5ee84b7d1505b43138e0b7a6bdba44a6702b6
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Querying the 'fiptool' for help or help <command> should return 0
return status (success) and not 1 (failure). In the other hand, if tool is
executed with any other command (not help) where command's parameters are
either missing or wrong, then the tool should return non-zero (failure). Now,
the 'usage' function caller is the one that passes the return status.
Change-Id: Id5eea91037cd810fb1e34a42e8199ef504f5daa4
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>
Updated cert_tool to add hash information of fw_config image into
the existing "trusted boot fw" certificate.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I720319225925806a2a9f50a1ac9c8a464be975f0
Added support in fiptool to include fw_config image
in FIP.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ibbd14723a4141598d9d7f6bfcf88a0ef92cf87bc
with sha 0792dd7, support to generate certificate for Secure
Partitions was added for dualroot CoT only, this patch extends
this support for tbbr CoT.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I451c0333536dd1cbe17861d454bdb0dc7a17c63f
To support secure boot of SP's update cert tool arguments while
generating sp_gen.mk which in turn is consumed by build system.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I2293cee9b7c684c27d387aba18e0294c701fb1cc
Add support to generate certificate "sip-sp-cert" for Secure
Partitions(SP) owned by Silicon provider(SiP).
To avoid deviation from TBBR specification the support is only added for
dualroot CoT and not for TBBR CoT.
A single certificate file is generated containing hash of individual
packages. Maximum 8 secure partitions are supported.
Following new options added to cert_tool:
--sip-sp-cert --> SiP owned Secure Partition Content Certificate
--sp-pkg1 --> Secure Partition Package1 file
--sp-pkg2
.....
--sp-pkg8
Trusted world key pair is used for signing.
Going forward, this feature can be extended for Platfrom owned
Partitions, if required.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ia6dfbc1447cfb41b1fcbd12cf2bf7b88f409bd8d
Add firmware authenticated encryption tool which utilizes OpenSSL
library to encrypt firmwares using a key provided via cmdline. Currently
this tool supports AES-GCM as an authenticated encryption algorithm.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I60e296af1b98f1912a19d5f91066be7ea85836e4
Selection of the chain of trust is done through the COT build option:
> make COT=dualroot
Change-Id: Id87c7a5116bdd13bdb29645ecf31d111ad094c1e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Till now TF-A allows limited number of external images to be made part
of FIP. With SPM coming along, there may exist multiple SP packages
which need to be inserted into FIP. To achieve this we need a more
scalable approach to feed SP packages to FIP.
This patch introduces changes in build system to generate and add SP
packages into FIP based on information provided by platform.
Platform provides information in form of JSON which contains layout
description of available Secure Partitions.
JSON parser script is invoked by build system early on and generates
a makefile which updates FIP, SPTOOL and FDT arguments which will be
used by build system later on for final packaging.
"SP_LAYOUT_FILE" passed as a build argument and can be outside of TF-A
tree. This option will be used only when SPD=spmd.
For each SP, generated makefile will have following entries
- FDT_SOURCES += sp1.dts
- SPTOOL_ARGS += -i sp1.img:sp1.dtb -o sp1.pkg
- FIP_ARGS += --blob uuid=XXXX-XXX...,file=SP1.pkg
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib6a9c064400caa3cd825d9886008a3af67741af7
This patch:
- Add the __COHERENT_RAM_START__ and __COHERENT_RAM_END__ symbols.
- Improve how the symbols are found with a regex.
- Add a build option to revert the memory layout output.
Change-Id: I54ec660261431bc98d78acb0f80e3d95bc5397ac
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Currently sptool generates a single blob containing all the Secure
Partitions, with latest SPM implementation, it is desirable to have
individual blobs for each Secure Partition. It allows to leverage
packaging and parsing of SP on existing FIP framework. It also allows
SP packages coming from different sources.
This patch modifies sptool so that it takes number of SP payload pairs
as input and generates number of SP blobs instead of a single blob.
Each SP blob can optionally have its own header containing offsets and
sizes of different payloads along with a SP magic number and version.
It is also associated in FIP with a UUID, provided by SP owner.
Usage example:
sptool -i sp1.bin:sp1.dtb -o sp1.pkg -i sp2.bin:sp2.dtb -o sp2.pkg ...
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ie2db8e601fa1d4182d0a1d22e78e9533dce231bc
In preparation of supporting alternate chains of trust, reword comments
and error messages that explicitly mentioned TBBR.
Change-Id: I85a0b08e16d0cd82f3b767fcc092d1f20f45939f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
It allows to select the desired chain of trust. Right now, only the TBBR
CoT is available.
At this stage, this build option only affects the tool itself. It is not
plugged into the rest of the build system yet. To use it:
> make -C tools/cert_create COT=tbbr
Change-Id: I4484418f76d3c7b330d8653c978499a181534dcd
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Move all TBBR-specific stuff out of the tool's makefile into a
sub-makefile. This will make it easier to define and select an alternate
chain of trust in the future.
Change-Id: I92e366a1999b74cf51127d1771b64b807cd94b29
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The chain of trust definitions are only needed in the part of the code
dealing with the TBBR CoT (tbbr/* files).
Change-Id: I6f9a86bba4a2d16313b6842a3ec85b7c951074bc
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
show_memory is a simple tools that parse the blx.map files and print a
representation of the memory layout for the latest build.
This representation is based on standard symbols present on the map
files as: __TEXT_START/END__, __RODATA_START/END__, __STACKS_START/END__
, etc..
Change-Id: Iba3e301a1a9fee9a35abf1afdb69093617d33929
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Support for PKCS#1 v1.5 was deprecated in SHA 1001202 and fully removed
in SHA fe199e3, however, cert_tool is still able to generate
certificates in that form. This patch fully removes the ability for
cert_tool to generate these certificates.
Additionally, this patch also fixes a bug where the issuing certificate
was a RSA and the issued certificate was EcDSA. In this case, the issued
certificate would be signed using PKCS#1 v1.5 instead of RSAPSS per
PKCS#1 v2.1, preventing TF-A from verifying the image signatures. Now
that PKCS#1 v1.5 support is removed, all certificates that are signed
with RSA now use the more modern padding scheme.
Change-Id: Id87d7d915be594a1876a73080528d968e65c4e9a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
cert_tool is now able to accept a command line option for specifying the
key size. It now supports the following options: 1024, 2048 (default),
3072 and 4096. This is also modifiable by TFA using the build flag
KEY_SIZE.
Change-Id: Ifadecf84ade3763249ee8cc7123a8178f606f0e5
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Meson is the internal code name for the SoC family. The correct name for
the platform should be Amlogic. Change the name of the platform
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Icc140e1ea137f12117acbf64c7dcb1a8b66b345d
The valgrind checks for cert_create have not been run in a long while -
as such there are a few memory leaks present. This patch fixes a few of
the major ones reported by valgrind. However, a few do remain.
Change-Id: Iab002fb2b0090043287d43fb54a4d18928c2ed85
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This change adds nmake compatible Makefile.msvc file for
building (nmake /FMakefile.msvc) fiptool on the Windows.
Change-Id: Iccd1fe8da072edd09eb04b8622f27b3c4693b281
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
GXL platforms need to have a specific header at the beginning of bl31
image to be able to boot. This adds a tool to create that and calls it at
build time.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
It is quite unlikely that this number will ever change and, if it
does need to change, we should have a good reason to do so. It
seems that this comment is now redundant.
Change-Id: I409c764080748e338e9bc5606bbdcc475213fb6e
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Commit 033648652f ("Make TF UUID RFC 4122 compliant") changed the scanf
parsing string to handle endianness correctly.
However that changed the number of items sscanf handles, without
adjusting the sanity check just below.
Increase the expected return value from 11 to 16 to let fiptool handle
UUIDs given as blob parameters correctly again.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This tool packages Secure Partitions and Resource Descriptor blobs into
a simple file that can be loaded by SPM.
Change-Id: If3800064f30bdc3d7fc6a15ffbb3007ef632bcaa
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.
The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.
The exceptions are files that are imported from other projects:
- CryptoCell driver
- dt-bindings folders
- zlib headers
Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Nicolas Le Bayon
Pali Rohár
Pankaj Gupta
Jimmy Brisson
Manish V Badarkhe
Biju Das
Ross Burton
Sami Mujawar
Ruari Phipps
Manish Pandey
Grant Likely
Konstantin Porotchkin
Leonardo Sandoval
Sumit Garg
Sandrine Bailleux
Louis Mayencourt
Justin Chadwell
Carlo Caione
Girish Pathak
Remi Pommarel
Marek Vasut
Paul Beesley
Andre Przywara
Antonio Nino Diaz