Introduced a build flag 'ENABLE_TRF_FOR_NS' to enable trace filter
control registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: If3f53b8173a5573424b9a405a4bd8c206ffdeb8c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Introduced a build flag 'ENABLE_SYS_REG_TRACE_FOR_NS' to enable trace
system registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: Idc1acede4186e101758cbf7bed5af7b634d7d18d
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Introduced a build flag 'ENABLE_TRBE_FOR_NS' to enable trace buffer
control registers access in NS-EL2, or NS-EL1 (when NS-EL2 is
implemented but unused).
Change-Id: I285a672ccd395eebd377714c992bb21062a729cc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Initialized FWU driver module in BL2 component under
build flag PSA_FWU_SUPPORT.
Change-Id: I08b191599835925c355981d695667828561b9a21
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added a firmware update metadata structure as per section 4.1
in the specification document[1].
Also, added the build options used in defining the firmware
update metadata structure.
[1]: https://developer.arm.com/documentation/den0118/a/
Change-Id: I8f43264a46fde777ceae7fd2a5bb0326f1711928
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Enables SVE support for the secure world via ENABLE_SVE_FOR_SWD.
ENABLE_SVE_FOR_SWD defaults to 0 and has to be explicitly set by the
platform. SVE is configured during initial setup and then uses EL3
context save/restore routine to switch between SVE configurations for
different contexts.
Reset value of CPTR_EL3 changed to be most restrictive by default.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I889fbbc2e435435d66779b73a2d90d1188bf4116
Add constants, structures and build definition for the
new standard SMCCC PCI conduit. These are documented
in DEN0115A.
https://developer.arm.com/documentation/den0115/latest
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: If667800a26b9ae88626e8d895674c9c2e8c09658
Platforms, which requires additional images to be
verified using TBBR; such that their key certificate
is tied to TRUSTED_KEY_CERT.
For such platforms, if make commands runs twice:
- Once with targets as bl2 & fip.bin, and
- Again to build the target as the additional image.
then, if path to the TRUSTED_KEY_CERT varies in the
makefile with make-target of the additional image, then
there would be two location where "trusted_key.crt" will
be created.
This patch helps overriding the TRUSTED_KEY_CERT from any .mk
in the platform's makefile structure.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I775a2c409035504b21b0bbe5a4f9046898163eed
ARMv8.6 adds virtual offset registers to support virtualization of the
event counters in EL1 and EL0. This patch enables support for this
feature in EL3 firmware.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7ee1f3d9f554930bf5ef6f3d492e932e6d95b217
This adds the TRNG Firmware Interface Service to the standard
service dispatcher. This includes a method for dispatching entropy
requests to platforms and includes an entropy pool implementation to
avoid dropping any entropy requested from the platform.
Change-Id: I71cadb3cb377a507652eca9e0d68714c973026e9
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Currently ${FIP_DEPS} as prerequisite for ${BUILD_PLAT}/${FIP_NAME}
contains .PHONY targets check_$(1) and therefore ${BUILD_PLAT}/${FIP_NAME}
is always rebuilt even when other file target prerequisites are not
changed.
These changes fix above issue and ${BUILD_PLAT}/${FIP_NAME} target is
rebuilt only when its prerequisites are changed.
There are 3 changes:
Content of check_$(1) target is moved into check_$(1)_cmd variable so it
can be easily reused.
.PHONY check_$(1) targets are not put into ${FIP_DEPS} and ${FWU_FIP_DEPS}
dependencies anymore and required checks which are in ${CHECK_FIP_CMD} and
${CHECK_FWU_FIP_CMD} variables are executed as part of targets
${BUILD_PLAT}/${FIP_NAME} and ${BUILD_PLAT}/${FWU_FIP_NAME} itself.
To ensure that ${BUILD_PLAT}/${FIP_NAME} and ${BUILD_PLAT}/${FWU_FIP_NAME}
are rebuilt even when additional dependency file image added by
TOOL_ADD_IMG is changed, this file image (if exists) is added as file
dependency to ${FIP_DEPS} and ${FWU_FIP_DEPS}. If it does not exist then
FORCE target is added to ensure that FIP/FWU_FIP is rebuilt. Command
${CHECK_FIP_CMD}/${CHECK_FWU_FIP_CMD} will then thrown an error message if
the file is required but not present.
So this change ensures that if BL33 image is updated then final FIP image
is updated too. And if BL33 image is not specified or does not exist and is
required to be present then check_$(1)_cmd call from ${CHECK_FIP_CMD} would
ensure that error message is thrown during build.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I635cf82e2b667ff57e2af83500d4aca71d235e3e
If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happening on other threads.
If FEAT_MTPMU is implemented, EL3 (or EL2) can override the MT bit
leaving it to effective state of 0 regardless of any write to it.
This patch introduces the DISABLE_MTPMU flag, which allows to diable
multithread event count from EL3 (or EL2). The flag is disabled
by default so the behavior is consistent with those architectures
that do not implement FEAT_MTPMU.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Iee3a8470ae8ba13316af1bd40c8d4aa86e0cb85e
This patch adds a new ARM_ARCH_FEATURE build option
to add support for compiler's feature modifiers.
It has the form '[no]feature+...' and defaults to
'none'. This option translates into compiler option
'-march=armvX[.Y]-a+[no]feature+...'.
Change-Id: I37742f270a898f5d6968e146cbcc04cbf53ef2ad
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Provide missed command line parameters such as KEY_ALG, HASH_ALG
and KEY_SIZE while generating the FWU certificate.
Signed-off-by: Gilad Ben Yossef <Gilad.BenYossef@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I017fa3fff844f4262ae2441cbc9fee909d357fb3
Include EL2 registers related to Nested Virtualization in EL2 context
save/restore routines if architecture supports it and platform wants to
use these features in Secure world.
Change-Id: If006ab83bbc2576488686f5ffdff88b91adced5c
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
This patch adds default value of 'sha256' for HASH_ALG
build flag to 'make_helpers\defaults.mk', according to
'docs\getting_started\build-options.rst'.
This fixes Measured Boot driver error when TF-A uses
default HASH_ALG value and TPM_HASH_ALG is set to
sha384 or sha512.
Change-Id: Id0aa34b54807de0adaf88e5f7d7032577c22f365
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Loop macros make it easier for developers to include new variables to
assert or define and also help code code readability on makefiles.
Change-Id: I0d21d6e67b3eca8976c4d856ac8ccc02c8bb5ffa
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>
Although support for building fiptool on a Windows host was present,
the binary was not built when the top level makefile was invoked.
This patch makes the necessary changes to the to support building of
fiptool on a Windows host PC from the main makefile.
Change-Id: I0c01ba237fa3010a027a1b324201131210cf4d7c
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
According to the documentation [1], KEY_SIZE defaults to 2048 when RSA
algorithm is chosen, so set this value on the make's defaults file.
[1] https://trustedfirmware-a.readthedocs.io/en/latest/getting_started/build-options.html
Change-Id: I030f98363198a752bc0dd03528f748de527d48d8
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>
SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.
This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.
Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Add support to generate a certificate named "plat-sp-cert" for Secure
Partitions(SP) owned by Platform.
Earlier a single certificate file "sip-sp-cert" was generated which
contained hash of all 8 SPs, with this change SPs are divided into
two categories viz "SiP owned" and "Plat owned" containing 4 SPs each.
Platform RoT key pair is used for signing.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I5bd493cfce4cf3fc14b87c8ed1045f633d0c92b6
Openssl directory path is hardcoded to '/usr' in the makefile
of certificate generation and firmware encryption tool using
'OPENSSL_DIR' variable.
Hence changes are done to make 'OPENSSL_DIR' variable as
a build option so that user can provide openssl directory
path while building the certificate generation and firmware
encryption tool.
Also, updated the document for this newly created build option
Change-Id: Ib1538370d2c59263417f5db3746d1087ee1c1339
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added a build option 'COT_DESC_IN_DTB' to create chain of trust
at runtime using fconf.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92b257ac4ece8bbf56f05a41d1e4056e2422ab89
This patch adds a build config 'RAS_TRAP_LOWER_EL_ERR_ACCESS' to set
SCR_EL3.TERR during CPU boot. This bit enables trapping RAS register
accesses from EL1 or EL2 to EL3.
RAS_TRAP_LOWER_EL_ERR_ACCESS is disabled by default.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ifb0fb0afedea7dd2a29a0b0491a1161ecd241438
Using the fconf framework, the Group 0 and Group 1 secure interrupt
descriptors are moved to device tree and retrieved in runtime. This
feature is enabled by the build flag SEC_INT_DESC_IN_FCONF.
Change-Id: I360c63a83286c7ecc2426cd1ff1b4746d61e633c
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Add support to generate certificate "sip-sp-cert" for Secure
Partitions(SP) owned by Silicon provider(SiP).
To avoid deviation from TBBR specification the support is only added for
dualroot CoT and not for TBBR CoT.
A single certificate file is generated containing hash of individual
packages. Maximum 8 secure partitions are supported.
Following new options added to cert_tool:
--sip-sp-cert --> SiP owned Secure Partition Content Certificate
--sp-pkg1 --> Secure Partition Package1 file
--sp-pkg2
.....
--sp-pkg8
Trusted world key pair is used for signing.
Going forward, this feature can be extended for Platfrom owned
Partitions, if required.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ia6dfbc1447cfb41b1fcbd12cf2bf7b88f409bd8d
This patch introduces dynamic configuration for SDEI setup and is supported
when the new build flag SDEI_IN_FCONF is enabled. Instead of using C arrays
and processing the configuration at compile time, the config is moved to
dts files. It will be retrieved at runtime during SDEI init, using the fconf
layer.
Change-Id: If5c35a7517ba00a9f258d7f3e7c8c20cee169a31
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Co-authored-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
During context switching from higher EL (EL2 or higher)
to lower EL can cause incorrect translation in TLB due to
speculative execution of AT instruction using out-of-context
translation regime.
Workaround is implemented as below during EL's (EL1 or EL2)
"context_restore" operation:
1. Disable page table walk using SCTLR.M and TCR.EPD0 & EPD1
bits for EL1 or EL2 (stage1 and stage2 disabled)
2. Save all system registers except TCR and SCTLR (for EL1 and EL2)
3. Do memory barrier operation (isb) to ensure all
system register writes are done.
4. Restore TCR and SCTLR registers (for EL1 and EL2)
Errata details are available for various CPUs as below:
Cortex-A76: 1165522
Cortex-A72: 1319367
Cortex-A57: 1319537
Cortex-A55: 1530923
Cortex-A53: 1530924
More details can be found in mail-chain:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-April/000445.html
Currently, Workaround is implemented as build option which is default
disabled.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If8545e61f782cb0c2dda7ffbaf50681c825bd2f0
Enable MTE support by adding memory tag option in Makefile
This option is available only when ARMv8.5-MemTag is implemented
MTE options are added in latest clang and armclang compiler which
support below options:
for clang <version 11.0.0>
1. -march=arm8.5-a+memtag
2. -fsanitize=memtag
for armclang <version 6.12>
1. -march=arm8.5-a+memtag
2. -mmemtag-stack
Set the option SUPPORT_STACK_MEMTAG=yes to enable memory stack tagging.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4e0bbde4e9769ce03ead6f550158e22f32c1c413
Currently, BL*_CFLAGS and BL*_LDFLAGS are supported.
For completion, this adds BL*_CPPFLAGS and BL*_ASFLAGS.
My main motivation is to pass -D<macro> to BL*_CPPFLAGS so that
the macro can be used from all source files.
Change-Id: I0ca1e4e26386bef7fed999af140ee7cce7c2f8ef
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Merge the previously introduced arm_fconf_io_storage into arm_io_storage. This
removes the duplicate io_policies and functions definition.
This patch:
- replace arm_io_storage.c with the content of arm_fconf_io_storage.c
- rename the USE_FCONF_BASED_IO option into ARM_IO_IN_DTB.
- use the ARM_IO_IN_DTB option to compile out io_policies moved in dtb.
- propagate DEFINES when parsing dts.
- use ARM_IO_IN_DTB to include or not uuid nodes in fw_config dtb.
- set the ARM_IO_IN_DTB to 0 by default for fvp. This ensure that the behavior
of fvp stays the same as it was before the introduction of fconf.
Change-Id: Ia774a96d1d3a2bccad29f7ce2e2b4c21b26c080e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Following build flags have been added to support optional firmware
encryption:
- FW_ENC_STATUS: Top level firmware's encryption numeric flag, values:
0: Encryption is done with Secret Symmetric Key (SSK) which is
common for a class of devices.
1: Encryption is done with Binding Secret Symmetric Key (BSSK) which
is unique per device.
- ENC_KEY: A 32-byte (256-bit) symmetric key in hex string format. It
could be SSK or BSSK depending on FW_ENC_STATUS flag.
- ENC_NONCE: A 12-byte (96-bit) encryption nonce or Initialization Vector
(IV) in hex string format.
- ENCRYPT_BL31: Binary flag to enable encryption of BL31 firmware.
- ENCRYPT_BL32: Binary flag to enable encryption of Secure BL32 payload.
Similar flags can be added to encrypt other firmwares as well depending
on use-cases.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I94374d6830ad5908df557f63823e58383d8ad670
Add framework for autheticated decryption of data. Currently this
patch optionally imports mbedtls library as a backend if build option
"DECRYPTION_SUPPORT = aes_gcm" is set to perform authenticated decryption
using AES-GCM algorithm.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I2966f0e79033151012bf4ffc66f484cd949e7271
Added SPMD_SPM_AT_SEL2 build command line parameter.
Set to 1 to run SPM at S-EL2.
Set to 0 to run SPM at S-EL1 (pre-v8.4 or S-EL2 is disabled).
Removed runtime EL from SPM core manifest.
Change-Id: Icb4f5ea4c800f266880db1d410d63fe27a1171c0
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
NOTE: Not all EL-2 system registers are saved/restored.
This subset includes registers recognized by ARMv8.0
Change-Id: I9993c7d78d8f5f8e72d1c6c8d6fd871283aa3ce0
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
The MAKE_BL macro is invoked for 1, 2, 2u, 31, 32.
Fix the comments.
Change-Id: I35dd25cc2ea13885c184fb9c8229a322b33f7e71
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch introduces a build flag which allows the xlat tables
to be mapped in a read-only region within BL31 memory. It makes it
much harder for someone who has acquired the ability to write to
arbitrary secure memory addresses to gain control of the
translation tables.
The memory attributes of the descriptors describing the tables
themselves are changed to read-only secure data. This change
happens at the end of BL31 runtime setup. Until this point, the
tables have read-write permissions. This gives a window of
opportunity for changes to be made to the tables with the MMU on
(e.g. reclaiming init code). No changes can be made to the tables
with the MMU turned on from this point onwards. This change is also
enabled for sp_min and tspd.
To make all this possible, the base table was moved to .rodata. The
penalty we pay is that now .rodata must be aligned to the size of
the base table (512B alignment). Still, this is better than putting
the base table with the higher level tables in the xlat_table
section, as that would cost us a full 4KB page.
Changing the tables from read-write to read-only cannot be done with
the MMU on, as the break-before-make sequence would invalidate the
descriptor which resolves the level 3 page table where that very
descriptor is located. This would make the translation required for
writing the changes impossible, generating an MMU fault.
The caches are also flushed.
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>
Change-Id: Ibe5de307e6dc94c67d6186139ac3973516430466
The build system needs to drive the cert_create tool in a slightly
different manner when using the dualroot chain of trust.
- It needs to pass it the platform root of trust key file.
- It must not try to generate the Non-Trusted Firmware Key Certificate,
which is not part of the dualroot CoT.
Change-Id: Ibcc821c5735765523730f861ae8230208f41302b
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Add `CREATE_SEQ` function to generate sequence of numbers starting from
1 to allow easy comparison of a user defined macro with non-zero
positive numbers.
Change-Id: Ibcb336a223d958154b1007d08c428fbaf1e48664
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Use the firmware configuration framework to store the io_policies
information inside the configuration device tree instead of the static
structure in the code base.
The io_policies required by BL1 can't be inside the dtb, as this one is
loaded by BL1, and only available at BL2.
This change currently only applies to FVP platform.
Change-Id: Ic9c1ac3931a4a136aa36f7f58f66d3764c1bfca1
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Allows to select the chain of trust to use when the Trusted Boot feature
is enabled. This affects both the cert_create tool and the firmware
itself.
Right now, the only available CoT is TBBR.
Change-Id: I7ab54e66508a1416cb3fcd3dfb0f055696763b3d
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This patch adds 'calc_hash' function using Mbed TLS library
required for Measured Boot support.
Change-Id: Ifc5aee0162d04db58ec6391e0726a526f29a52bb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
make_helpers/build_macros.mk supports per-BL CFLAGS. For example,
you can pass compiler flags only to BL31 by using BL31_CFLAGS.
This commit adds per-BL LDFLAGS support, which is useful as well.
My main motivation of this addition is to use it for ENABLE_PIE.
When ENABLE_PIE is enabled, some linker flags are added to TF_LDFLAGS,
which affects all the TF images. It will make more sense to pass the
relevant options only to BL images that support it.
Change-Id: I203acaab0091db5ae0ea6e66460ee7dc8d9c4d75
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Using the /include/ syntax, the include was evaluated by dtc, only after running
the preprocessor, therefore the .dtsi files were not preprocessed. This patch
adds the #include syntax instead. Evaluating this and preprocessing the files
now happens in a single step, done by the C preprocessor.
Change-Id: I6d0104b6274316fc736e84973502a4d6c2c9d6e0
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Some platforms are extremely memory constrained and must split BL31
between multiple non-contiguous areas in SRAM. Allow the NOBITS
sections (.bss, stacks, page tables, and coherent memory) to be placed
in a separate region of RAM from the loaded firmware image.
Because the NOBITS region may be at a lower address than the rest of
BL31, __RW_{START,END}__ and __BL31_{START,END}__ cannot include this
region, or el3_entrypoint_common would attempt to invalidate the dcache
for the entire address space. New symbols __NOBITS_{START,END}__ are
added when SEPARATE_NOBITS_REGION is enabled, and the dcached for the
NOBITS region is invalidated separately.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Idedfec5e4dbee77e94f2fdd356e6ae6f4dc79d37
The Secure Partition Manager (SPM) prototype implementation is
being removed. This is preparatory work for putting in place a
dispatcher component that, in turn, enables partition managers
at S-EL2 / S-EL1.
This patch removes:
- The core service files (std_svc/spm)
- The Resource Descriptor headers (include/services)
- SPRT protocol support and service definitions
- SPCI protocol support and service definitions
Change-Id: Iaade6f6422eaf9a71187b1e2a4dffd7fb8766426
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the other is based on the Secure Partition Client Interface
(SPCI) specification. Currently there is a dependency between their
build flags that shouldn't exist, making further development
harder than it should be. This patch removes that
dependency, making the two flags function independently.
Before: ENABLE_SPM=1 is required for using either implementation.
By default, the SPCI-based implementation is enabled and
this is overridden if SPM_MM=1.
After: ENABLE_SPM=1 enables the SPCI-based implementation.
SPM_MM=1 enables the MM-based implementation.
The two build flags are mutually exclusive.
Note that the name of the ENABLE_SPM flag remains a bit
ambiguous - this will be improved in a subsequent patch. For this
patch the intention was to leave the name as-is so that it is
easier to track the changes that were made.
Change-Id: I8e64ee545d811c7000f27e8dc8ebb977d670608a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
The 9p interface provides abstraction layers allowing the software
that uses devices to be independent from the hardware.
This patch provides a file system abstraction to link drivers to their
devices and propose a common interface to expose driver operations to
higher layers. This file system can be used to access and configure a
device by doing read/write operations.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ia9662393baf489855dc0c8f389fe4a0afbc9c255
This patch enables LTO for TF-A when compiled with GCC.
LTO is disabled by default and is enabled by
ENABLE_LTO=1 build option.
LTO is enabled only for aarch64 as there seem to be
a bug in the aarch32 compiler when LTO is enabled.
The changes in the makefiles include:
- Adding -flto and associated flags to enable LTO.
- Using gcc as a wrapper at link time instead of ld.
This is recommended when using LTO as gcc internally
takes care of invoking the necessary plugins for LTO.
- Adding switches to pass options to ld.
- Adding a flag to disable fix for erratum cortex-a53-843419
unless explicitly enabled. This is needed because GCC
seem to automatically add the erratum fix when used
as a wrapper for LD.
Additionally, this patch updates the TF-A user guide with
the new build option.
Signed-off-by: zelalem-aweke <zelalem.aweke@arm.com>
Change-Id: I1188c11974da98434b7dc9344e058cd1eacf5468
Make the spinlock implementation use ARMv8.1-LSE CAS instruction based
on a platform build option. The CAS-based implementation used to be
unconditionally selected for all ARM8.1+ platforms.
The previous CAS spinlock implementation had a bug wherein the spin_unlock()
implementation had an `sev` after `stlr` which is not sufficient. A dsb is
needed to ensure that the stlr completes prior to the sev. Having a dsb is
heavyweight and a better solution would be to use load exclusive semantics
to monitor the lock and wake up from wfe when a store happens to the lock.
The patch implements the same.
Change-Id: I5283ce4a889376e4cc01d1b9d09afa8229a2e522
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Manish V Badarkhe
Max Shvetsov
Jeremy Linton
Pankaj Gupta
johpow01
Jimmy Brisson
Pali Rohár
Javier Almansa Sobrino
Alexei Fedorov
Arunachalam Ganapathy
Leonardo Sandoval
Sami Mujawar
Madhukar Pappireddy
Manish Pandey
Varun Wadekar
Balint Dobszay
Masahiro Yamada
Louis Mayencourt
Sumit Garg
Petre-Ionut Tudor
Sandrine Bailleux
Vijayenthiran Subramaniam
Samuel Holland
Paul Beesley
Olivier Deprez
zelalem-aweke
Soby Mathew