- move base register definition to platform_def.h for maintenance.
- SSPM_MBOX_3_BASE is redefined, use SSPM_MBOX_BASE instead.
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: Ibb0291ce7b7426068392e90bd70f29d1a90d5297
OpenSSL 3.0 is a pre-requisite since v2.7 and can be installed
on the operating system by updating the previous version.
However, this may not be convenient for everyone, as some may
want to keep their previous versions of OpenSSL.
This update on the docs shows that there is an alternative to
install OpenSSL on the system by using a local build of
OpenSSL 3.0 and pointing both the build and run commands to
that build.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: Ib9ad9ee5c333f7b04e2747ae02433aa66e6397f3
Locate BL1 at 0x1000 to compensate for the MCUBoot
header size.
Signed-off-by: Anders Dellien <anders.dellien@arm.com>
Change-Id: I30a5ccf8212786479bff8286f3d0abb9dec4b7d0
Cortex-A78C erratum 2132064 is a cat B erratum that applies to revisions
r0p1 and r0p2 and is still open.
This patch implements workaround option 2 that places the data
prefetcher in the most conservative mode to greatly reduce prefetches
by writing the following bits to the value indicated:
ecltr[7:6], PF_MODE = 2'b11
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2004089/latest
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ica2561c1e257643c2482085447ef852fa62a1eb2
These polling loops are not required according to the spec
Signed-off-by: anans <anans@google.com>
Change-Id: I50d832ba495f30cc7a0553c84e58b747d51e0a4e
Use the IPI command GET_HANDOFF_PARAM to get the TF-A handoff
params, rather than using the PLM's PPU RAM area. With this
approach this resolves the issue when XPPU is enabled.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Change-Id: I6828c391ad696d2d36e994684aa21b023711ba2d
Move the ATF handoff structure from the plat_startup.c to the
header file plat_startup.h, as these can be used by the platform code.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Change-Id: Ifb425d444eb65fe8648952d2ff64d4e92c2b340a
Move the payload and module ID macros from the pm_api_sys.c file and
add it in the header file, as these macros can be used other than PM.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Change-Id: I678444b79ac3799a82bd93915e4639b3babf5fb9
Add an empty line just before the "Build Host" title.
Without this, the title is not properly recognized, it does not get
added to the table of contents and the underlining characters appear
as dashes, as can be seen here:
https://trustedfirmware-a.readthedocs.io/en/v2.7/getting_started/prerequisites.html#prerequisites
Change-Id: Ia89cf3de0588495cbe64b0247dc860619f5ea6a8
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Currently the SVE code hard codes a maximum vector length of 512 bits
when configuring SVE rather than the architecture supported maximum.
While this is fine for current physical implementations the architecture
allows for vector lengths up to 2048 bits and emulated implementations
generally allow any length up to this maximum.
Since there may be system specific reasons to limit the maximum vector
length make the limit configurable, defaulting to the architecture
maximum. The default should be suitable for most implementations since
the hardware will limit the actual vector length selected to what is
physically supported in the system.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I22c32c98a81c0cf9562411189d8a610a5b61ca12
Some fdts changes in STM32MP1 family can be dedicated to one SoC,
STM32MP13 or STM32MP15. Add the dedicated scopes.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2d64244054251c1f89dfe1ebbf6ce9dac21d47b6
* changes:
feat(imx8m): keep pu domains in default state during boot stage
feat(imx8m): add the PU power domain support on imx8mm/mn
feat(imx8m): add the anamix pll override setting
feat(imx8m): add the ddr frequency change support for imx8m family
feat(imx8mn): enable dram retention suuport on imx8mn
feat(imx8mm): enable dram retention suuport on imx8mm
feat(imx8m): add dram retention flow for imx8m family
This is an SoM in SODIMM-200 format on an evaluation board called
"DHCOM Premium Developer Kit #2" (DHCOM PDK2 for short). The SoM features an
STM32MP157C SoC with 1 GB DDR3, 8 GB eMMC, microSD and 2 MB SPI flash.
The baseboard has multiple UART, USB, SPI, and I2C ports/headers and several
other interfaces that are not important for TF-A.
These dts(i) files are based on DHCOM dt's from Linux 5.16 and U-Boot 2022.01.
The DRAM calibration values are taken from U-Boot 2022.01 and are optimized for
industrial temperature range above 85° C.
TF-A on this board was fully tested with the latest OP-TEE developer setup.
Change-Id: I696c01742954d761fbad312cd1059e3ab01fa93c
Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Added debug logs to show the reason behind skipping firmware
configuration loading, and also a few debug strings were corrected.
Additionally, a panic will be triggered if the configuration sanity
fails.
Change-Id: I6bbd67b72801e178a14cbe677a8831b25a907d0c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This change replaces the polling loop with fixed number of retries,
returns error values and handles them in ufs_enum.
Signed-off-by: Rohit Ner <rohitner@google.com>
Change-Id: Ia769ef26703c7525091e55ff46aaae4637db933c
Neoverse-N2 erratum 2388450 is a cat B erratum that applies to
revision r0p0 and is fixed in r0p1. The workaround is to set
bit[40] of CPUACTLR2_EL1 to disable folding of demand requests into
older prefetches with L2 miss requests outstanding.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Change-Id: I6dd949c79cea8dbad322e569aa5de86cf8cf9639
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
The value of the macro CSS_SGI_REMOTE_CHIP_MEM_OFFSET can be different
across all the Neoverse reference design platforms. This value depends
on the number of address bits used per chip. So let all platforms define
CSS_SGI_ADDR_BITS_PER_CHIP which specifies the number of address bits
used per chip.
In addition to this, reuse the definition of CSS_SGI_ADDR_BITS_PER_CHIP
for single chip platforms and CSS_SGI_REMOTE_CHIP_MEM_OFFSET for multi-
chip platforms to determine the maximum address space size. Also,
increase the RD-N2 multi-chip address space per chip from 4TB to 64TB.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: If5e69ec26c2389304c71911729d4addbdf8b2686
The EL3 runtime firmware has been running from internal trusted
SRAM space on the Morello platform. Due to unavailability of tag
support for the internal trusted SRAM this becomes a problem if
we enable capability pointers in BL31.
To support capability pointers in BL31 it has to be run from the
main DDR memory space. This patch updates the Morello platform
configuration such that BL31 is loaded and run from DDR space.
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Change-Id: I16d4d757fb6f58c364f5133236d50fc06845e0b4
The patch 8c980a4 created a 4KB shared region from the 32MB
Realm region for RMM-EL3 communication. But this meant that BL2
needs to map a region of 32MB - 4KB, which required more xlat
tables at runtime. This patch maps the entire 32MB region in BL2
which is more memory efficient in terms of xlat tables needed.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I17aa27545293d7b5bbec1c9132ea2c22bf2e7e65
MISRA Violation: MISRA-C:2012 R.10.1
1) The expression of non-boolean essential type is being interpreted as a
boolean value for the operator.
2) The operand to the operator does not have an essentially unsigned type.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I97bbc056f4fee167742429e144144ba793bf77b3
while sbsa maintainers upstream decide whether new cpus types
should be in, add fujitsu a64fx cpu type in advance
Signed-off-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Change-Id: I521a62f1233f3fe6e92f040edaff2cc60a1bd874
On STM32MP13, USART1 and USART2 addresses are 0x4C000000 and 0x4C001000.
Whereas on STM32MP15, the addresses were 0x5C000000 and 0x4000E000.
Use dedicated flags to choose the correct address, that could be use
for early or crash console.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I98bd97a0ac8b0408a50376801e2a1961b241a3d6
Joanna Farley
Olivier Deprez
Yidi Lin
Manish V Badarkhe
Sandrine Bailleux
Juan Pablo Conde
Anders Dellien
Madhukar Pappireddy
laurenw-arm
Manish Pandey
anans
Venkatesh Yadav Abbarapu
Bipin Ravi
Mark Brown
Yann Gautier
Johann Neuhauser
Rohit Ner
Daniel Boulby
Vijayenthiran Subramaniam
Manoj Kumar
Soby Mathew
Itaru Kitayama
Javier Almansa Sobrino
Yann Gautier