This drivers was only used by one upstream platform: STM32MP1 but only
when enabling the flag STM32MP_USE_STM32IMAGE. This flag and the
corresponding code is now removed from TF-A. The driver can then be
set to deprecated. It will be removed after v2.9 tag.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ib8242a7291c7011d7f96a6a83609ec1996dce520
The deprecation was tagged "Next release after 2.8". Now there is a 2.9
planned, directly use this version.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I0727eebc4a3800dafafc4166b0c2c40a12c90b4b
Top level sections are not numbered. Adding numbers makes referring to
sections easier. For example the Maintainers page changes from
"about/3.1" to simply "1.3.1".
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: If90a18ee8d6a6858d58f0687f31ea62b69399e04
The code managing legacy boot (without FIP) that was under
STM32MP_USE_STM32IMAGE flag is remove.
Change-Id: I04452453ed84567b0de39e900594a81526562259
Signed-off-by: Yann Gautier <yann.gautier@st.com>
In some platform the digest of the public key saved in the OTP is not
the digest of the exact same public key buffer needed to check the
signature. Typically, platform checks signature using the DER ROTPK
whereas some others add some related information. Add a new platform
weak function to transform the public key buffer used by
verify_signature to a platform specific public key.
Mark this new weak function as deprecated as it will be replaced
by another framework implementation.
Change-Id: I71017b41e3eca9398cededf317ad97e9b511be5f
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
As part of release process revisit list of maintainers to keep
it updated.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I63b87265a6bff00ad05d8b3b7cad694cdf48e9ea
We used to have a dedicated page for deprecated platforms information.
This document contained 2 pieces of information:
a) the process for deprecating a platform port;
b) the list of deprecated platforms to this day.
I think it makes more sense to move b) to the platforms ports landing
page, such that it is more visible.
This also has the nice effect to move the 'Deprecated platforms' title
as the last entry of the 'Platform ports' table of contents, like so:
- Platform ports
- 1. Allwinner ARMv8 SoCs
- 2. Arm Development Platforms
...
- 39. Broadcom Stingray
- Deprecated platforms
instead of it being lost in the middle of supported platform ports.
Regarding a), this gets moved under the "Processes & Policies" section.
More specifically, it gets clubbed with the existing platform
compatibility policy. The combined document gets renamed into a
"Platforms Ports Policy" document.
Change-Id: I6e9ce2abc68b8a8ac88e7bd5f21749c14c9a2af6
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Add Muhammad Arsath K F in qti maintainer
Signed-off-by: Muhammad Arsath K F <quic_mkf@quicinc.com>
Change-Id: I71e6cc72b3c658730abe5255977f3b93dd7e4563
Code owners have been added for the Arm(R) Ethos(TM)-N NPU driver.
Change-Id: I0bda0d95151cdff5cd3a793c6c0e9ef6a9a5f50b
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Recently new Xilinx Versal NET platform has been merged but documentation
cover only zynqmp. Fix the fragment to cover all Xilinx documentation.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I10f8f865ca8d46518135adb80ba0ba4470534529
Adds a dispatcher for ProvenCore based on the test secure payload
dispatcher.
Signed-off-by: Florian Lugou <florian.lugou@provenrun.com>
Change-Id: I978afc3af6a6f65791655685a7bc80070673c9f3
Switch emails from Xilinx to AMD after acquisition.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I5d126dc49e53f2735bb7e103f8f883a9474206fc
John Powell is no longer part of the TF-A core team at Arm.
Change-Id: Iaa91474cb2c5c334b9ae6f2376724fad2677e285
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Jimmy Brisson is no longer part of the TF-A core team at Arm.
Change-Id: I2966c513a0c2cda438a05dedd42149d16190cbf6
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Adding Sandrine Bailleux for the PSA APIs and myself for the
MHU and RSS comms drivers as code owner.
Change-Id: Ib948479cc6e46163aae59c938877a2d0bcf91754
Signed-off-by: David Vincze <david.vincze@arm.com>
Renamed the existing SPM entry to the SPMD and add myself
as the SPMC maintainer.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: Ic74659b119986df5fc229a4470049d289eeef21a
Split TLK/Trusty SPD into two separate components and add additional
owners for Trusty SPD.
Signed-off-by: Marco Nelissen <marcone@google.com>
Change-Id: Ifabd1bb630fe4976e304fa29eac1c516ec6e2e18
Added myself and Sandrine Bailleux as code owners for Firmware
Update driver.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Change-Id: I34fad895c6236fedc814fb6da4b04fd7fbed9227
Propose myself as a code owner of the measured boot module.
Also do a couple of updates along the way:
- Add the measured boot bindings document to the list of measured
boot files.
- Fix the list of FVP files. plat/arm/board/fvp/fvp_measured_boot.c
does not exist anymore. It has been replaced by
plat/arm/board/fvp/fvp_measured_{bl1,bl2,common}_boot.c files.
Change-Id: Ifb34f4f7c704b1db966b44428bbffd48c5e3c42b
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Add Sieu Mun Tang and Benjamin Jit Loon Lim as new
Intel SocFPGA platform maintainers and remove the
rest of the Intel SocFPGA platform maintainers.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ieb9a35e278d70a12351aaccab90ddc7be09dc861
With the transition to mailman3, the URLs of TF-A and TF-A Tests
mailing lists have changed. However, we still refer to the old
location, which are now dead links.
Update all relevant links throughout the documentation.
There is one link referring to a specific thread on the TF-A mailing
list in the SPM documentation, for which I had to make a guess as to
what's the equivalent mailman3 URL. The old URL scheme indicates that
the thread dates from February 2020 but beyond that, I could not make
sense of the thread id within the old URL so I picked the most likely
match amongst the 3 emails posted on the subject in this time period.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Reported-by: Kuohong Wang <kuohong.wang@mediatek.com>
Change-Id: I83f4843afd1dd46f885df225931d8458152dbb58
Update document for nxp-layerscape to add ls1088a SoC and ls1088ardb,
update maintainer of ls1088a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ic7fdc7b1bbf22e50646991093366a88ee523ffe3
Update document for nxp-layerscape to add ls1046a SoC and ls1046ardb,
ls1046afrwy board support.
Also update maintainer of ls1046a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I522f978bc93aa8d1f1d60fa8efef392b7d854df7
diphda platform is now being renamed to corstone1000.
These changes are to replace all the instances and traces
of diphda corstone1000.
Change-Id: I330f3a112d232b99b4721b6bf0236253b068dbba
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
The Qualcomm Snapdragon 410 is Qualcomm's first 64-bit SoC, released
in 2014 with four ARM Cortex-A53 cores. There are differents variants
(MSM8916, APQ8016(E), ...) that are all very similar. A popular device
based on APQ8016E is the DragonBoard 410c single-board computer,
but the SoC is also used in various mid-range smartphones/tablets.
This commit adds documentation for a minimal, community-maintained port
of TF-A/BL31 for MSM8916. The actual platform port is added in the
following four separate small commits to simplify the review process.
The code is primarily based on the information from the public
Snapdragon 410E Technical Reference Manual [1], combined with a lot of
trial and error to actually make it work.
Note that this port is a pure community effort without any
commercial interests and is not related to Qualcomm in any way.
The main motivation for this port is to have a minimal, updatable
firmware since this old chip does not receive many updates anymore from
Qualcomm. It works quite well for many use cases so I am willing to
maintain it as a "code owner". I have also added Nikita Travkin as
second code owner to help with reviews.
The main limitation so far is the lack of memory protection for TF-A.
This is similar to the ports for the Raspberry Pi but in this case not
a lack of hardware support but rather a lack of documentation. However,
this does not limit the usefulness of the port when used as a minimal
PSCI implementation.
[1]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdf
Change-Id: I676adf86061638cfc2f3ae8615470d145e84f172
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Added myself to be NXP common code and ls1028a, ls1043a platforms
maintainer.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iadffc5600e9bb2e94b1d545b8dd1a819358cabcb
This macro was used for the legacy boot mode on SPM32MP platforms.
The recommended boot method is now FIP.
The code under this macro will be removed after tag v2.7.
Change-Id: Id3b7baea2d3e6ea8b36a4cd0b107cb92591a172b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This change introduces a new NPM run script to automatically generate
the release changelog, as well as bump version numbers across the
code-base and create the release tag.
This script runs [Standard Version] to execute this, which is a tool
designed around automating substantial parts of the release process.
This can be done by running:
npm run release -- [<standard-version args>]
Standard Version expects the project to adhere to the [Semantic
Versioning] convention which TF-A does not, so you may need to specify
the version manually, e.g.:
npm run release -- --release-as 2.6.0
Individual steps of the release process may also be skipped at-will,
which may be necessary when, for example, tweaking the changelog:
npm run release -- --skip.commit --skip.tag
Standard Version is configured by the `.versionrc.js` file, which
contains information about the Conventional Commits types and scopes
used by the project, and how they map to the changelog.
To maintain continuity with the existing changelog style - at least to
the extent possible in the move from manual to automatic creation - a
customized changelog template has been introduced, based on the
Conventional Commits template provided by Standard Version.
This template package extends the Conventional Commits template package
by introducing support for parsing the Conventional Commits scopes into
changelog sections, similarly to how they were previously organized.
[Standard Version]:
https://github.com/conventional-changelog/standard-version
[Semantic Versioning]: https://semver.org
Change-Id: I5bafa512daedc631baae951651c38c1c62046b0a
Signed-off-by: Chris Kay <chris.kay@arm.com>
This patch adds some documentation for the GPT library as well as adds
code owners for it.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: If1cd79626eadb27e1024d731b26ee2e20af74a66
there are features which are marked as experimental even though they
are stable and used for quite some time.
Following features are no longer marked as experimental
- SPMD
- MEASURED_BOOT
- FCONF and associated build flags
- DECRYPTION_SUPPORT and associated build flags
- ENABLE_PAUTH
- ENABLE_BTI
- USE_SPINLOCK_CAS
- GICv3 Multichip support
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I4bb653d9c413c66095ec31f0b8aefeb13ea04ee9
This patch adds instructions on how to build and run TF-A
with FEAT_RME enabled. The patch also adds code owners for
FEAT_RME.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: Id16dc52cb76b1ea56ac5c3fc38cb0794a62ac2a1
This renames tc0 platform folder and files to tc, and introduces
TARGET_PLATFORM variable to account for the differences between
TC0 and TC1.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I5b4a83f3453afd12542267091b3edab4c139c5cd
This commit enables trusted-firmware-a with Trusted Board Boot support
for the Diphda 64-bit platform.
Diphda uses a FIP image located in the flash. The FIP contains the
following components:
- BL2
- BL31
- BL32
- BL32 SPMC manifest
- BL33
- The TBB certificates
The board boot relies on CoT (chain of trust). The trusted-firmware-a
BL2 is extracted from the FIP and verified by the Secure Enclave
processor. BL2 verification relies on the signature area at the
beginning of the BL2 image. This area is needed by the SecureEnclave
bootloader.
Then, the application processor is released from reset and starts by
executing BL2.
BL2 performs the actions described in the trusted-firmware-a TBB design
document.
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Change-Id: Iddb1cb9c2a0324a9635e23821c210ac81dfc305d
The two existing plat/rockchip code owners seem to be no longer active
in the project and are not responding to reviews. There have been a
couple of small fixup patches[1][2][3] pending for months that couldn't
be checked in for lack of Code-Owner-Review+1 flag. Add myself to the
code owner list to unblock this bottleneck (I have been deeply involved
in the rk3399 port, at least, so I know most of the code reasonably
well).
[1] https://review.trustedfirmware.org/9616
[2] https://review.trustedfirmware.org/9990
[2] https://review.trustedfirmware.org/10415
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic7b2bb73c35a9bea91ff46ee445a22819d2045d9
Rupinderjit Singh
Yann Gautier
Joanna Farley
Boyan Karatotev
Nicolas Toromanoff
Bipin Ravi
Manish Pandey
Sandrine Bailleux
Muhammad Arsath K F
Mikael Olsson
Anders Dellien
Michal Simek
Florian Lugou
Javier Almansa Sobrino
J-Alves
David Vincze
Daniel Boulby
Marc Bonnici
Marco Nelissen
Manish V Badarkhe
Sieu Mun Tang
Rex-BC Chen
Jiafei Pan
Vishnu Banavath
Stephan Gerhold
Chris Kay
johpow01
Zelalem Aweke
Saurabh Gorecha
Usama Arif
Peng Fan
Abdellatif El Khlifi
Julius Werner
Pankaj Gupta