Create a function to check for fpga readiness, and move the checking out
of bridge enable function.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3f473ffeffa9ce181a48977560c8bda19c6123c0
This is to make sure that bridge access in disabled before doing full
FPGA reconfiguration and turn re-enable it once the configuration
succeed.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1f42fbf04ac1625048bbdf21b8a0443464ed833d
SiP CONFIG_ISDONE now will query status for either CONFIG_STATUS or
RECONFIG_STATUS based on passed parameter
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Idb8a84af4e98654759843de09a289d31246c9a91
Refactored system manager driver to be shared across both intel platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ic4d056c3d15c3152403dc11641c2452770a6162d
Refactor reset manager into intel common platform directory as it can be
shared by both Stratix 10 and Agilex. Register address and field is now
referred through macros.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Id6d50f2a2f5a6bd8d6746b84602ac17ec7f6c07a
Add bridge enablement features for each platform.
The bridge access will be enabled automatically for FPGA 1st
configuration only.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I264757b257a209e1c3c4206660f21c5d67af0d2f
Combine both peripheral and bridge non-secure access code
into a single callable function
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I38d335ed8d1e9f55d337b63cca121a473897ef70
UEFI decompression will fail if the payload size is too large and the load
address is too low. This patch moves the payload to a higher address to fix
the issue
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I36087fbd2237b62891c59dbe2d34336bddfaa396
All function in socfpga_sip_svc.c should only be called locally except
sip_smc_handler().
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib84ef9a2e521967baa4cfd32e6bc569dd3a5d2f5
This patch removes un-needed r/w parameter checks for qspi driver. The
driver can actually access any offset and size.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: If60b2c016aa91e2c24ddc57c6ad410c8dc5dcf53
In further patches, we wish to enable -wredundant-decls check as
part of warning flags by default.
Change-Id: I43410d6dbf40361a503c16d94ccf0f4cf29615b7
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Increase calibration delay to cater for HPS 1st mode and
reduce clear emif delay which takes too long
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1a50a5d8a6518ba085d853cb636efa07326552b4
Add support for platform specific warm-reset through psci system reset 2.
- system_reset2 implementation that calls for l2 cache reset
- Check for magic number and request for warm reset in bl2
- Create a shared reset manager header file for Agilex and Stratix 10
- Clean up parameter info in plat_get_next_bl_params
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3fdd9a2711c80d9bd3dc05b81527781d840bd726
Enable access to secure registers by non-secure world through secure
monitor calls
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I80610e08c7cf31f17f47a7597c269131a8de2491
Fixes the SiP Service driver that is responsible for FPGA
reconfiguration. Also change the base address of FPGA reconfiguration
to 0x400000.
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I2b84c12c85cd5fc235247131fec4916ed2fb56c8
There are a few issues in mailbox that needs to be fixed.
- Send doorbell after an indirect cmd
- Do not ring doorbell when polling mailbox response as it should've been
sent by send_cmd
- remove unneeded cmd_free_offset check
- Fix mailbox initialization
- Fix get_config_status returning a wrong status when the status is busy
- Add command length in mailbox command header
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: If613e2ca889a540a616c62d69ad0086a7cd46536
Add-in support for handling BL31 parameter from non-BL2 image, ie. SPL
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I16118d791399f652b6d1093c10092935a3449c32
Load BL31 to DDR instead of On-Chip RAM for scalability. Also, make use
of On-Chip RAM for BL31 specific variables filling down from handoff
offset to reduce fragmentation
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib64f48bd14f71e5fca2d406f4ede3386f2881099
This patch will provide an entrypoint for uboot's spl into BL31.
BL31 will also handle secondary cpu state during uboot's cold boot
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I661bdb782c2d793d5fc3c7f78dd7ff746e33b7a3
Move the get_config_status out of sip_svc driver.
Modify the function so that it can return either
CONFIG_STATUS or RECONFIG_STATUS
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I642d5900339e67f98be61380edc2b838e0dd47af
Separate SiP related definition from mailbox header file
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I45ba540f29d9261007f7ec23469358747cf140b4
remove plat_sip_svc.c and plat_psci.c in stratix 10 platform directory
as both has been refactored to common directory for sharing with agilex
platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I395fed66408f536e8fefd637681e742c63621818
Pull out SiP & PSCI service driver into socfpga common directory.
Remove deassert_peripheral_reset from cold reset procedure as it is not
needed.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I1a0390fca6db4c89919a2a038de2a9d96c3ae4fd
Pull out mailbox driver into common area as they can be shared between
intel's socfpga platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4064de1ec668931d77abcb7804f6952b70d33716
Share socfpga private definitions and storage driver between Agilex and
Stratix 10 platform.
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I6da147f4d2df4a97c505d4bbcffadf63bc3bf4a5
Pull out handoff driver to intel/soc/ common directory as they can be
shared by both Agilex and Stratix10 platform.
Share platform_def header between both Agilex and Stratix10 and store
platform specific definitions in socfpga_plat_def.h
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I8eff1afd7ee71704a36a54fad732ede4f557878d
Some of the platform (ie. Agilex) make use of CCU IPs which will only be
initialized during bl2_el3_early_platform_setup. Any operation to the
cache beforehand will crash the platform. Hence, this will provide an
option to skip the data cache invalidation upon bl2 entry at EL3
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2c924ed0589a72d0034714c31be8fe57237d1f06
Disable gic cpu interface for powered down cpu. This patch also removes
core reset during power off as core reset will be done during power on
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2ca96d876b6e71e56d24a9a7e184b6d6226b8673
Driver will calculate DDR size instead of using hardcoded value
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I642cf2180929965ef12bd5ae4393b2f3d0dcddde
To provide glitchless clock to downstream logic even if clock toggles
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I728d64d0ba3b4492125bea5b0737fc83180356f1
Extract clock information for UART, MMC & Watchdog from the clock manager
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I42d3d4ceeaf45788d457472f6ddcd3fe099f0133
Extract clock information for UART, MMC & Watchdog from the platform
rather than hard code it
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2582bd34a6da97bd75d5ccba5f93840e65f26b03
Pull out common code from aarch64 and include
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4d0f5e1bb01bcdacbedf8e6c359de594239b645f
Pull out common code from agilex and stratix10
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Iddc0a9e6eccb30823d7b15615d5ce9c6bedb2abc
"result of '1 << 31' requires 33 bits to represent, but 'int' only has
32 bits [-Werror=shift-overflow=]"
This is treated as an error since commit 93c690eba8 ("Enable
-Wshift-overflow=2 to check for undefined shift behavior")
Change-Id: I141827a6711ab7759bfd6357e4ed9c1176da7c7b
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: I4c7a315cb18b3bbe623e7a7a998d2dac869638a7
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
MMC sample select needs to be set properly so that DWMMC clock can be
driven to 50Mhz
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I4a1dde4f6a1e78a36940c57a7a5b162be0bd443a
Deepika Bhavnani
Hadi Asyrafi
Tien Hock, Loh
Madhukar Pappireddy
Ambroise Vincent
Justin Chadwell