arm-trusted-firmware

13245 Commits

5 Branches

114 Tags

55 MiB

Tree: b2d78e1c41

Commit Graph

Author	SHA1	Message	Date
Rajasekaran Kalidoss	352366ede4	refactor(ethos-n): move build flags to ethosn_npu.mk The build flags to enable the Arm(R) Ethos(TM)-N NPU driver are in arm platform specific make files i.e. plat/arm/common/arm_common.mk. These flags are renamed and moved to ethosn_npu.mk. Other source and make files are changed to reflect the changes in these flags. Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com> Change-Id: I6fd20225343c574cb5ac1f0f32ff2fc28ef37ea6	2 years ago
Mikael Olsson	76a21174d2	Add SiP service to configure Arm Ethos-N NPU By default the Arm Ethos-N NPU will boot up in secure mode. In this mode the non-secure world cannot access the registers needed to use the NPU. To still allow the non-secure world to use the NPU, a SiP service has been added that can delegate non-secure access to the registers needed to use it. Only the HW_CONFIG for the Arm Juno platform has been updated to include the device tree for the NPU and the platform currently only loads the HW_CONFIG in AArch64 builds. Signed-off-by: Mikael Olsson <mikael.olsson@arm.com> Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2	4 years ago
Mikael Olsson	5d5fb10f9c	plat/arm/juno: Add support to use hw_config in BL31 To make it possible to use the hw_config device tree for dynamic configuration in BL31 on the Arm Juno platform. A placeholder hw_config has been added that is included in the FIP and a Juno specific BL31 setup has been added to populate fconf with the hw_config. Juno's BL2 setup has been updated to align it with the new behavior implemented in the Arm FVP platform, where fw_config is passed in arg1 to BL31 instead of soc_fw_config. The BL31 setup is expected to use the fw_config passed in arg1 to find the hw_config. Signed-off-by: Mikael Olsson <mikael.olsson@arm.com> Change-Id: Ib3570faa6714f92ab8451e8f1e59779dcf19c0b6	4 years ago

Author

SHA1

Message

Date

Rajasekaran Kalidoss

352366ede4

refactor(ethos-n): move build flags to ethosn_npu.mk

The build flags to enable the Arm(R) Ethos(TM)-N NPU driver are in arm
platform specific make files i.e. plat/arm/common/arm_common.mk. These
flags are renamed and moved to ethosn_npu.mk. Other source and make
files are changed to reflect the changes in these flags.

Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Change-Id: I6fd20225343c574cb5ac1f0f32ff2fc28ef37ea6

2 years ago

Mikael Olsson

76a21174d2

Add SiP service to configure Arm Ethos-N NPU

By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.

Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.

Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2

4 years ago

Mikael Olsson

5d5fb10f9c

plat/arm/juno: Add support to use hw_config in BL31

To make it possible to use the hw_config device tree for dynamic
configuration in BL31 on the Arm Juno platform. A placeholder hw_config
has been added that is included in the FIP and a Juno specific BL31
setup has been added to populate fconf with the hw_config.

Juno's BL2 setup has been updated to align it with the new behavior
implemented in the Arm FVP platform, where fw_config is passed in arg1
to BL31 instead of soc_fw_config. The BL31 setup is expected to use the
fw_config passed in arg1 to find the hw_config.

Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ib3570faa6714f92ab8451e8f1e59779dcf19c0b6

4 years ago

3 Commits (b2d78e1c41b901e3d41913f02050c27628eb0fea)