Add SMP support for Versal NET via register access.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Akshay Belsare <Akshay.Belsare@amd.com>
Change-Id: I46d73e2cd678ae720b5255722b6b0611c22659e8
New SoC is a78 based with gicv3 and uart over pl011. Communication
interfaces are similar to Versal platform. System starts with Xilinx PLM
firmware which loads TF-A(bl31) to DDR, which is already configured, and
jumps to it. PLM also prepare handoff structure for TF-A with information
what components were load and flags which indicate which EL level SW should
be started.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Akshay Belsare <Akshay.Belsare@amd.com>
Change-Id: I2a16c242a77be6c91be3d198727dc3b9bbb97410
Serial output is missing the EOL marker, which makes the output garbled.
Add EOL to the output, which adds a newline and makes log output
consistent.
Fixes: 77850c96f2 ("feat(plat/imx8m): do not release JR0 to NS if HAB is using it")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Franck LENORMAND <franck.lenormand@nxp.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Change-Id: I58b67f441016122bc9361d7224d310522917eff0
MISRA Violation: MISRA-C:2012 R.4.6
- Using basic numerical type int rather than a typedef
that includes size and signedness information.
Change-Id: Id85e69b29b124052b4a87462ce27fcdfc00c13c9
Signed-off-by: HariBabu Gattem <haribabu.gattem@amd.com>
* changes:
feat(sgi): enable css implementation of warm reset
feat(scmi): send powerdown request to online secondary cpus
feat(plat/arm/css): add interrupt handler for reboot request
refactor(psci): move psci_do_pwrdown_sequence() out of private header
feat(plat/arm/css): add per-cpu power down support for warm reset
feat(scmi): set warm reboot entry point
fix(gicv3): update the affinity mask to 8 bit
ProvenCore requires secure SGIs to be handled at S-EL1. This patch
overrides the default ZynqMP configuration to handle them at EL3 in case
ProvenCore SPD is enabled.
Signed-off-by: Jeremie Corbier <jeremie.corbier@provenrun.com>
Signed-off-by: Mélanie Favre <melanie.favre@provenrun.com>
Change-Id: I2e36d2983f82fbb9b7acf7e18791b8ed92811b60
Adds a dispatcher for ProvenCore based on the test secure payload
dispatcher.
Signed-off-by: Florian Lugou <florian.lugou@provenrun.com>
Change-Id: I978afc3af6a6f65791655685a7bc80070673c9f3
Enable the CSS implementation of the warm reset for the rdn2 platform.
In addition to these changes, fix coding style issues that are not
directly related to the code being introduced in this patch.
Change-Id: I75128d8bbcccbc26cf1e904691c7ef71349c622f
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
To initiate a reset or reboot, the nonsecure OS invokes the PSCI
SYSTEM_RESET function from any one core. As per the PSCI specification,
it is the responsibility of firmware to implement the system view of
the reset or reboot operation. For the platforms supported by CSS,
trigger the reset/reboot operation by sending an SGI to rest all CPUs
which are online. The CPUs respond to this interrupt by initiating its
powerdown sequence.
In addition to these changes, fix coding style issues that are not
directly related to the code being introduced in this patch.
Change-Id: I547253ee28ef7eefa78180d016893671a406bbfa
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Add platform specific interrupt handler for handling the reboot of
all CPU's. On shutdown/reboot, only one CPU invoke PSCI and enter into
trusted firmware. The CPU which entered trusted firmware signals the
rest of the cores which are online using SGI to initiate power down
sequence. On receiving the SGI, the handler will power down the
GIC redistributor interface of the respective core, configure the power
control register and power down the CPU by executing wfi.
In addition to these changes, fix coding style issues that are not
directly related to the code being introduced in this patch.
Change-Id: I4917dfdc47be5ce7367bee629486a6344cdd706f
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Move the psci_do_pwrdown_sequence() function declaration from PSCI
private header to common header. The psci_do_pwrdown_sequence is
required to support warm reset, where each CPU need to execute the
powerdown sequence.
Change-Id: I298e7a120be814941fa91c0b001002a080e56263
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Add a new function to setup a SGI interrupt that will be used to trigger
a request for per-cpu power down when executing the PSCI SYSTEM_RESET
request. This will be used on CSS platform that require all the CPUs to
execute the CPU specific power down sequence to complete a warm reboot
sequence in which only the CPUs are power cycled.
Change-Id: I80da0f6c3cd0c5c442c82239ba1e1f773821a7f5
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Before issuing the system power down command, set the trusted mailbox
to 0. This will ensure that in the case of a warm/cold reset, the
primary CPU executes from the cold boot sequence, clearing any stale
jump address at this location.
Change-Id: I491ef5baf7a6728acd7e90e4558939ba77b8f9bf
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
The GIC ICC_SGI0R_EL1 register's affinity fields are 8bit wide for GIC
v3 and v4. Fix the SGIR_AFF_MASK variable accordingly.
Change-Id: I09f3fdd006708b40162776620f82abcfc6c3f782
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
If primary core is down, then IPI interrupt should be
routed to another core for processing.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Change-Id: I01d7c4232a18c0c3b3f3f9ddadfa6ff5bd2f2471
The script 'sp_mk_generator.py' was reworked in [1]. There was a
reference the variable 'data' left. This variable 'data' used to refer
to the json data of a the sp layout file.
This patch fixed the reference with the proper variable according to the
rework [1].
[1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=a96a07bfb66b7d38fe3da824e8ba183967659008
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: I9ddbfa8d55a114bcef6997920522571e070fc7d2
This patch adds two helper functions:
- plat_ic_raise_ns_sgi to raise a NS SGI
- plat_ic_raise_s_el1_sgi to raise a S-EL1 SGI
Signed-off-by: Florian Lugou <florian.lugou@provenrun.com>
Change-Id: I6f262dd1da1d77fec3f850eb74189e726b8e24da
ICC_SRE_EL2 has only 4 bits, while others are RES0. The library programs
all four of them already, so there is no need to read the previous
settings from the actual register.
This patch removes the explicit register read as a result.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Iff0cb3b0d6fd85e5ae891068e440d855973a1c5e
* changes:
chore(zynqmp): fix comment style in zynqmp_def.h
chore(versal): add missing dot at the end of sentence
fix(zynqmp): remove additional 0x in %p print
fix(versal): fix Misra-C violations in bl31_setup and pm_svc_main
Instead of exclude code for Versal, define only for ZynqMP.
For new platforms this code should be excluded so instead of
excluding for all platform, define only for ZynqMP.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I45798dadc0f374c5794f517f7d0158675a75caa9
Platform specific IPI header inclusion is not required
in common IPI source file. So remove inclusion of the same.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I6686757f00370c6ec42b5ee2c44ea5cd13da70c0
pm_ipi.h needs some definitions from stddef.h so include it.
Currently it is working because required file is included
indirectly due to other includes.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: Ic4a6c469c3152e21eaeb365ba96f3a29f14593bf
Add missing space in one line comment to follow common coding style.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: Idebf8f34bf48444ee20a68ac3e6fd7f5a41bf8b0
%p is already printing value in hex that's why 0x prefix is not needed.
Origin message looks like this
"NOTICE: Can't read DT at 0x0x100000"
and after fixing
"NOTICE: Can't read DT at 0x100000"
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: If83c485a61441f6105d8cbd797f04060dfce2817
Fix some Misra-C violations. The similar fixes were done by commit
eb0d2b1772 ("fix(zynqmp): resolve misra R15.6 warnings") and commit
dd1fe7178b ("fix(zynqmp): resolve misra R14.4 warnings").
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I3ffa92724a09871f7f99c9ac6c326994c165e9bd
GICD reg write must complete before core goes to idle
mode. Achieve this with dsb() barrier instruction in IPI
ISR
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Change-Id: I5af42ca901567ee5e54a5434ebe3e673a92cb9be
This toolchain provides multiple cross compilers and is publicly
available on https://developer.arm.com/
We build TF-A in CI using:
AArch32 bare-metal target (arm-none-eabi)
AArch64 ELF bare-metal target (aarch64-none-elf)
Change-Id: I94e13f6c1ebe3a4a58ca6c79c1605bd300b372d3
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
The commit 389594dfa7 ("fix(zynqmp): move bl31 with DEBUG=1 back to OCM")
tried to move address to OCM but address was actually out of OCM and likely
it was typo. Correct default address should be 0xfffe5000. If TF-A size is
bigger please select location DDR which should be fine for DEBUG cases.
Reported-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I055f3a59cdca527f6029fcc2a19d76be35924d24
Update TZ_VERSION macro name to generic macro name and move to
common header file so that it can be used for keystoneb.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@xilinx.com>
Acked-by: Tanmay Shah <tanmay.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: Ic3819eea78b6c7b51ffaa13081026dd191b76125
Only one hardcode interrupt handler is supported as of now.
This is IPI interrupt between APU and PMC processor.
This patch adds infrastructure to register multiple interrupt
handlers. This infrastructure was used and tested for two
interrupts and so, interrupt id and handler container size is
2 which is defined by MAX_INTR_EL3. Interrupt id is not used
as container index due to size constraints. User is expected to
adjust MAX_INTR_EL3 based on how many interrupts are handled in
TF-A
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Change-Id: Id49d94f6773fbb6874ccf89c0d12572efc7e678e
PM_FEATURE_CHECK is supported only for platform
management API. PM_LOAD_PDI command is not intended
for platform management. This patch removes version
check of PM_LOAD_PDI and adds version check of command
that is used for SGI registartion.
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
Change-Id: I353163109b639acab73120f405a811770e8831a0
Madhukar Pappireddy
Michal Simek
Andrey Zhizhikin
Joanna Farley
HariBabu Gattem
Manish V Badarkhe
Jeremie Corbier
Florian Lugou
Pranav Madhu
Manish Pandey
Rupinderjit Singh
Tanmay Shah
J-Alves
Varun Wadekar
Rajan Vaja
Bipin Ravi
Jayanth Dodderi Chidanand
Jay Buddhabhatti
Tanmay Shah