arm-trusted-firmware

14150 Commits

5 Branches

114 Tags

55 MiB

Tree: c67057fee0

Commit Graph

Author	SHA1	Message	Date
Lionel Debieve	f29c0702d2	feat(mtd): add platform function to allow using external buffer The scratch buffer could be large. The new function allows platform to defined its own external buffer or use the default one. Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com> Change-Id: Ib7ab8ff19fa0a9cb06e364f058b91af58c3c471a	4 years ago
Yann Gautier	bc3eebb25d	feat(nand): count bad blocks before a given offset In case of FIP, the offsets given in the FIP header are relative. If bad blocks are found between the FIP base address and this offset, the offset should be updated, taking care of the bad blocks. Change-Id: I96fefabb583b3d030ab05191bae7d45cfeefe341 Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>	4 years ago
Lionel Debieve	b114abb609	Add raw NAND framework The raw NAND framework supports SLC NAND devices. It introduces a new high level interface (io_mtd) that defines operations a driver can register to the NAND framework. This interface will fill in the io_mtd device specification: - device_size - erase_size that could be used by the io_storage interface. NAND core source file integrates the standard read loop that performs NAND device read operations using a skip bad block strategy. A platform buffer must be defined in case of unaligned data. This buffer must fit to the maximum device page size defined by PLATFORM_MTD_MAX_PAGE_SIZE. The raw_nand.c source file embeds the specific NAND operations to read data. The read command is a raw page read without any ECC correction. This can be overridden by a low level driver. No generic support for write or erase command or software ECC correction. NAND ONFI detection is available and can be enabled using NAND_ONFI_DETECT=1. For non-ONFI NAND management, platform can define required information. Change-Id: Id80e9864456cf47f02b74938cf25d99261da8e82 Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Christophe Kerello <christophe.kerello@st.com>	5 years ago

Author

SHA1

Message

Date

Lionel Debieve

f29c0702d2

feat(mtd): add platform function to allow using external buffer

The scratch buffer could be large. The new function allows
platform to defined its own external buffer or use the default
one.

Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ib7ab8ff19fa0a9cb06e364f058b91af58c3c471a

4 years ago

Yann Gautier

bc3eebb25d

feat(nand): count bad blocks before a given offset

In case of FIP, the offsets given in the FIP header are relative.
If bad blocks are found between the FIP base address and this offset,
the offset should be updated, taking care of the bad blocks.

Change-Id: I96fefabb583b3d030ab05191bae7d45cfeefe341
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

4 years ago

Lionel Debieve

b114abb609

Add raw NAND framework

The raw NAND framework supports SLC NAND devices.

It introduces a new high level interface (io_mtd) that
defines operations a driver can register to the NAND framework.
This interface will fill in the io_mtd device specification:
	- device_size
        - erase_size
that could be used by the io_storage interface.

NAND core source file integrates the standard read loop that
performs NAND device read operations using a skip bad block strategy.
A platform buffer must be defined in case of unaligned
data. This buffer must fit to the maximum device page size
defined by PLATFORM_MTD_MAX_PAGE_SIZE.

The raw_nand.c source file embeds the specific NAND operations
to read data.
The read command is a raw page read without any ECC correction.
This can be overridden by a low level driver.
No generic support for write or erase command or software
ECC correction.

NAND ONFI detection is available and can be enabled using
NAND_ONFI_DETECT=1.
For non-ONFI NAND management, platform can define required
information.

Change-Id: Id80e9864456cf47f02b74938cf25d99261da8e82
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

5 years ago

3 Commits (c67057fee0be4f268ac346cfe0332d04b0ebf10a)