The readme.rst file in the project root is the front-page that
is displayed on Github and if viewing the TF-A repository on
git.trustedfirmware.org in the "about" view. It now contains a
small amount of stub content, and directs readers to the
ReadTheDocs documentation via trustedfirmware.org/docs/tf-a.
The Github renderer is displaying the content fine but the cgit
viewer displays some "backlink" errors because some content
substitutions were left in place (terms surrounded by pipe
symbols), e.g. |TF-A|.
This patch removes those substitutions, that are not supported
by cgit, and also updates one heading to clarify where to find
the new docs.
Change-Id: I358451df45b8c99975ba0b6db8ea61253a10560d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
The readme.rst and license.rst files in the project root overlap
with the index.rst and license.rst files in the docs/ folder. We
need to use the latter when building the documentation, as Sphinx
requires all included files to be under a common root. However,
the files in the root are currently used by the cgit and Github
viewers.
Using symlinks in Git presents some difficulties so the best
course of action is likely to leave these files but in stub form.
The license.rst file in the root will simply tell the reader to
refer to docs/license.rst.
The readme.rst file will contain a small amount of content that
is derived from the docs/index.rst file, so that the Github main
page will have something valid to show, but it will also contain
a link to the full documentation on ReadTheDocs.
Change-Id: I6dc46f08777e8d7ecb32ca7afc07a28486c9f77a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
This patch provides the following features and makes modifications
listed below:
- Individual APIAKey key generation for each CPU.
- New key generation on every BL31 warm boot and TSP CPU On event.
- Per-CPU storage of APIAKey added in percpu_data[]
of cpu_data structure.
- `plat_init_apiakey()` function replaced with `plat_init_apkey()`
which returns 128-bit value and uses Generic timer physical counter
value to increase the randomness of the generated key.
The new function can be used for generation of all ARMv8.3-PAuth keys
- ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`.
- New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions
generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively;
pauth_disable_el1()` and `pauth_disable_el3()` functions disable
PAuth for EL1 and EL3 respectively;
`pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from
cpu-data structure.
- Combined `save_gp_pauth_registers()` function replaces calls to
`save_gp_registers()` and `pauth_context_save()`;
`restore_gp_pauth_registers()` replaces `pauth_context_restore()`
and `restore_gp_registers()` calls.
- `restore_gp_registers_eret()` function removed with corresponding
code placed in `el3_exit()`.
- Fixed the issue when `pauth_t pauth_ctx` structure allocated space
for 12 uint64_t PAuth registers instead of 10 by removal of macro
CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h`
and assigning its value to CTX_PAUTH_REGS_END.
- Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions
in `msr spsel` instruction instead of hard-coded values.
- Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI.
Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Provide the friendly marketing names, not just the platform name.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id4427abb73d0c1be4ac1709b2a8e87beffc20dd5
1) Fix links in "about" page
2) Put back the "contents" page with adjusted links
Change-Id: Id09140b91df5cf0a275149801d05d8cfeeda1c6e
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
- Fix broken link to the issue tracker.
- Add contents section to make navigation easier throughout the page.
- Move the link to documentation contents near the top. Where it was
before could be missed and documentation might seem inaccessible.
Change-Id: I502e4fc0fd312459cda351d30a8781c221625724
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
Update the documentation for trustedfirmware.org migration
Change-Id: Ibb7052b0becbec3326164f1503806ca2c2fd4dcc
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
These SPM-related specifications are mentioned in the readme and
the change log. Update references to these specs to make it clear
that they are in draft form and are expected to change.
Change-Id: Ia2791c48c371a828246d96f102a402747cd69f96
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Update both the readme and user guide on their shared "platform"
section.
Change-Id: Ia1f30acda45ac8facdcb7d540800191cdf6cdacf
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The security advisories would all appear on a single line. Use bullet
points instead to improve the readability.
Change-Id: Id631985d7d559b3632f43d695cffa6735520b64a
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This patch covers two changes:
- Links that refer to GitHub are updated to point to the
relevant content on trustedfirmware.org
- Internal links between documents have been updated,
with the required .rst suffix being added or due
to a change in the relative locations of the files.
Change-Id: Ibf87da7d2ece726d1c94a9b33a2bbc3129de7779
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Replace all usage of 'sgiclark' with 'rdn1e1edge' and 'sgiclarkh' with
'rde1edge' as per the updated product names.
Change-Id: I14e9b0332851798531de21d70eb54f1e5557a7bd
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Replace all usage of 'sgiclark' with 'rdn1e1edge' and 'sgiclarka' with
'rdn1edge' as per the updated product names.
Change-Id: Idbc157c73477ec32f507ba2d4a4e907d8813374c
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Improves wording and sentence structure of the readme, including:
- Using "TF-A" in place of "the TF-A" in a couple of places
- "Support for X" in place of "Support X"
- Explicitly naming the Secure Payload Dispatcher when introducing the
SPD acronym.
Change-Id: I4e7b7e7dc6748f631d07c02d97adcca10ae60ea4
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Currently the examples of Arm interface standards all include
abbreviationsof the full names, except for SCMI.
Change-Id: I8417ada780d51ecf93426aa5d265c507c7dac08c
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Taken from http://git.simple-cc.org/scc/ from the following commit:
67508ad14af314cea2229783d3c084f28c41daf0
Permission has been granted from the author to use them under the
license BSD-3-Clause instead of ISC.
Change-Id: I65c0ce3ab60c49d34a57533af12a74bd7bde88e5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Added information on how disjunctively dual licensed code from
other projects is treated in the TF-A project.
Change-Id: Idca329abba4d36bd3c4fd722ac1556940b9135a2
Signed-off-by: Dan Handley <dan.handley@arm.com>
Add Makefile and plaform definations file.
My thanks to Daniel Thompson and Ard Biesheuvel for the bits and pieces
I've taken from their earlier work regarding build and deploy steps for
Developerbox based on Synquacer SoCs. They deserve much of the credit
for this work although, since I assembled and tested things, any blame
is probably mine.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Create the baseline Makefile, platform definitions file and platform
specific assembly macros file. This includes first set of constants
for the platform including cache sizes and linker format and a stub for
BL31 and the basic memory layout
K3 SoC family of processors do not use require a BL1 or BL2 binary,
since such functions are provided by an system controller on the SoC.
This lowers the burden of ATF to purely managing the local ARM cores
themselves.
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Update Arm Trusted Firmware references in the upstream documents to
Trusted Firmware-A (TF-A). This is for consistency with and
disambiguation from Trusted Firmware-M (TF-M).
Also update other Arm trademarks, e.g. ARM->Arm, ARMv8->Armv8-A.
Change-Id: I8bb0e18af29c6744eeea2dc6c08f2c10b20ede22
Signed-off-by: Dan Handley <dan.handley@arm.com>
Signed-off-by: David Cunado <david.cunado@arm.com>
Clarify the license information for imported third party code in
the readme.rst file.
Change-Id: I96e26fda687a290a6dffb475aca20b169d85784d
Signed-off-by: Dan Handley <dan.handley@arm.com>
Update the release notes (readme.rst) for the ARM Trusted Firmware v1.4 release.
Also, reorder and fix some of the links following the conversion to
reStructured text format.
Change-Id: I8f5e8aa86cb891f61b6b62cf9fab0ad0f0ebb36b
Signed-off-by: Dan Handley <dan.handley@arm.com>
Due to recent issues in the rendering of the documentation on GitHub and
some long-standing issues like the lack of automatic table of content in
Markdown, the documentation has been converted to reStructuredText.
Basic constructs looks pretty similar to Markdown.
Automatically convert GitHub markdown documentation to reStructuredText
using pandoc.
Change-Id: If20b695acedc6d1b49c8d9fb64efd6b6ba23f4a9
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Paul Beesley
Alexei Fedorov
Balint Dobszay
Samuel Holland
John Tsichritzis
Sandrine Bailleux
Louis Mayencourt
Remi Pommarel
Ambroise Vincent
Joel Hutton
Chandni Cherukuri
Antonio Nino Diaz
Joanna Farley
Dan Handley
Dimitris Papastamos
Sumit Garg
Nishanth Menon
Douglas Raillard