Add one device tree to support a family of boards (PRTT1C, PRTT1S,
PRTT1A) based on STM32MP151AAD3, used as sensors and actuators for
industrial, 10BaseT1L based networks.
This change was tested with barebox 2022.12.0 bootloader and kernel
v6.2.0-rc1.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Change-Id: Ibab9933eadd7aa379ae0a7c7ccbfc2fbb9a44ca8
The support of a predefined DDR PHY tuning result is removed for
STM32MP1 driver because it is not needed at the supported frequency
when built-in calibration is executed.
The calibration parameters were provided in the device tree by the
optional node "st,phy-cal", activated in ddr helper file by the
compilation flag DDR_PHY_CAL_SKIP and filled with values generated
by CubeMX.
This patch
- updates the binding file to remove "st,phy-cal" support
- updates the device trees and remove the associated defines
- simplifies the STM32MP1 DDR driver and remove the support of
the optional "st,phy-cal"
After this patch the built-in calibration is always executed.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I3fc445520c259f7f05730aefc25e64b328bf7159
Add 2021 year in the file header Copyright line.
Change-Id: I09f7bef1f746c429ff308286169354e58648a1cd
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The kilohertz unit abbreviation should read 'kHz' in DDR
settings files of stm32mp15.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Ifa363094f58dd943ef78c653c3e470a216739b41
There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A
The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.
There are 4 packages available, for which the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.
STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.
Some reordering is done in other files, and realign with kernel DT files.
The DDR files are generated with our internal tool, no changes in the
registers values.
Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Update DDR parameters to version 1.45.
Remove useless sdmmc1_dir_pins_b node.
Add USART3 and UART7 nodes.
Correct a PMIC value for USB regulator.
Add TIMER12, TIMER15, CRYP, HASH and USBOTG_HS nodes.
Update DTSI file for SDMMC compatible, but overwrite it with the former
name.
Move BSEC board_id node to boards DTS files, as this OTP is specific to
STMicroelectronics boards.
Change-Id: If4d2fe090c6a8368afe8e21e5ac70579911d3939
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the device tree files to support the 2 discovery boards: DK1 & DK2.
Change-Id: I90b4797dc69bd0aab1b643a72c932ead48a03c1f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The drivers are also updated to reflect the changes.
Set RCC as non-secure.
Change-Id: I568fa1f418355830ad1d4d1cdcdb910fb362231b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Those device tree files are taken from STM32MP1 U-Boot and Linux.
And they are updated to fit TF-A needs.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
David Jander
Patrick Delaunay
Yann Gautier