Tree:
cc4f383863
dependabot/npm_and_yarn/word-wrap-1.2.4
dependabot/pip/docs/markdown-it-py-2.2.0
dependabot/pip/requests-2.31.0
dependabot/pip/urllib3-2.0.6
master
arm_cca_v0.1
arm_cca_v0.2
arm_cca_v0.3
for-v0.4-rc0
for-v0.4/05.20
for-v0.4/05.21
for-v0.4/05.22
lts-test
lts-v2.10.1
lts-v2.10.2
lts-v2.10.3
lts-v2.10.4
lts-v2.8-rc0
lts-v2.8.0
lts-v2.8.1
lts-v2.8.10
lts-v2.8.11
lts-v2.8.12
lts-v2.8.13
lts-v2.8.14
lts-v2.8.15
lts-v2.8.16
lts-v2.8.17
lts-v2.8.18
lts-v2.8.2
lts-v2.8.3
lts-v2.8.4
lts-v2.8.5
lts-v2.8.6
lts-v2.8.7
lts-v2.8.8
lts-v2.8.9
sandbox/lts-v2.10.3-20240319T0822
sandbox/lts-v2.10.3-20240319T1236
sandbox/lts-v2.10.3-20240404T0850
sandbox/lts-v2.10.3-20240405T0714
sandbox/lts-v2.10.3-test1
v0.2
v0.3
v0.3-Juno
v0.3-Juno-0.2
v0.3-Juno-0.3
v0.4
v0.4-Juno-0.4
v0.4-Juno-0.4-rc0
v0.4-Juno-0.5
v0.4-Juno-0.5-rc0
v0.4-Juno-0.5-rc1
v0.4-Juno-0.6-rc0
v0.4-Juno-0.6-rc1
v0.4-rc1
v0.4-rc2
v1.0
v1.0-rc0
v1.1
v1.1-Juno-0.1
v1.1-rc0
v1.1-rc1
v1.1-rc2
v1.1-rc3
v1.2
v1.2-rc0
v1.3
v1.3-rc0
v1.3_rc1
v1.3_rc2
v1.4
v1.4-rc0
v1.5
v1.5-rc0
v1.5-rc1
v1.5-rc2
v1.5-rc3
v1.6
v1.6-rc0
v1.6-rc1
v2.0
v2.0-rc0
v2.1
v2.1-rc0
v2.1-rc1
v2.10
v2.10-rc0
v2.10-rc1
v2.10.0
v2.2
v2.2-rc0
v2.2-rc1
v2.2-rc2
v2.3
v2.3-rc0
v2.3-rc1
v2.3-rc2
v2.4
v2.4-rc0
v2.4-rc1
v2.4-rc2
v2.5
v2.5-rc0
v2.5-rc1
v2.6
v2.6-rc0
v2.6-rc1
v2.7
v2.7-rc0
v2.7-rc1
v2.7.0
v2.8
v2.8-rc0
v2.8.0
v2.9
v2.9-rc0
v2.9-rc1
v2.9.0
${ noResults }
1 Commits (cc4f3838633e8faab00323228140c025d173ae00)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Grzegorz Szymaszek
|
c3c6732f8e |
fdts: stm32mp1: add support for the Seeed Odyssey SoM and board
Seeed Studio’s SoM‐STM32MP157C is a System‐on‐Module that integrates the STM32MP157C MPU (the 650 MHz dual‐core variant with a GPU and a cryptographic processor) the STPMIC1A PMIC, 512 MB of DDR3 RAM and a 4 GB eMMC. There are two LEDs as well, one hardwired to the PMIC’s VDD output, and the other available at the MPU’s port PG3. The SoM can be plugged into a carrier board using its three 70‑pin connectors. Seeed Odyssey‐STM32MP157C is the reference carrier board for the SoM in a Raspberry Pi‐like form factor. It features a WiFi/Bluetooth chip, a microSD card port and various I/O interfaces. The device tree is based on the DKx boards. TF‑A was successfully tested on the board with Buildroot 2021.02 and U-Boot 2021.04. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Change-Id: I2c9aecc925561e8d338dddbb192d3bb23a533914 |
4 years ago |