This patch adds support to toggle SE clock, using the bpmp_ipc
interface, to enable SE context save/restore. The SE sequence mostly
gets called during System Suspend/Resume.
Change-Id: I9cee12a9e14861d5e3c8c4f18b4d7f898b6ebfa7
Signed-off-by: steven kao <skao@nvidia.com>
This patch fixes the header file paths to include debug.h
from the right location.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: If303792d2169158f436ae6aa5b6d7a4f88e28f7b
Setting errata workarounds for N1 1043202 and 1315703 to 0 since
they should be turned off by default.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I116673a4ddcf64436e90d70133f035a133989ed9
Out of two possible implementation of Secure Partition Manager(SPM)
currently only Management mode (MM) design is supported and the support
for SPM based on SPCI Alpha 1 prototype has been removed.
Earlier both implementation used common build flag "ENABLE_SPM" but it
has since been decoupled and MM uses a separate build FLAG "SPM_MM".
Instructions to build it for FVP was still using "ENABLE_SPM", which has
beend corrected in this patch.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I505b98173d6051816436aa602ced6dbec4efc776
* changes:
plat: xilinx: Move pm_client.h to common directory
plat: xilinx: versal: Make silicon default build target
xilinx: versal: Wire silicon default setup
versal: Increase OCM memory size for DEBUG builds
plat: xilinx: versal: Dont set IOU switch clock
arm64: versal: Adjust cpu clock for versal virtual
xilinx: versal: Add support for PM_GET_OPERATING_CHARACTERISTIC EEMI call
plat: versal: Add Get_ChipID API
plat: xilinx: versal: Add load Pdi API support
xilinx: versal: Add feature check API
xilinx: versal: Implement set wakeup source for client
plat: xilinx: versal: Add GET_CALLBACK_DATA function
xilinx: versal: Add PSCI APIs for system shutdown & reset
xilinx: versal: Add PSCI APIs for suspend/resume
xilinx: versal: Remove no_pmc ops to ON power domain
xilinx: versal: Add set wakeup source API
xilinx: versal: Add client wakeup API
xilinx: versal: Add query data API
xilinx: versal: Add request wakeup API
xilinx: versal: Add PM_INIT_FINALIZE API for versal
xilinx: versal: Add support of PM_GET_TRUSTZONE_VERSION API
xilinx: versal: enable ipi mailbox service
xilinx: move ipi mailbox svc to xilinx common
plat: xilinx: versal: Implement PM IOCTL API
xilinx: versal: Implement power down/restart related EEMI API
xilinx: versal: Add SMC handler for EEMI API
xilinx: versal: Implement PLL related PM APIs
xilinx: versal: Implement clock related PM APIs
xilinx: versal: Implement pin control related PM APIs
xilinx: versal: Implement reset related PM APIs
xilinx: versal: Implement device related PM APIs
xilinx: versal: Add support for suspend related APIs
xilinx: versal: Add get_api_version support
xilinx: Add support to send PM API to PMC using IPI for versal
plat: xilinx: versal: Move versal_def.h to include directory
plat: xilinx: versal: Move versal_private.h to include directory
plat: xilinx: zynqmp: Use GIC framework for warm restart
Moving the FDT helper functions to the common/ directory exposed the file
to MISRA checking, which is mandatory for common code.
Fix the complaints that the test suite reported.
Change-Id: Ica8c8a95218bba5a3fd92a55407de24df58e8476
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
the build to require that ARM_BL31_IN_DRAM is enabled as well.
Naturally with SEPARATE_NOBITS_REGION enabled, the BL31 initialization code
cannot be reclaimed to be used for runtime data such as secondary cpu stacks.
Memory map for BL31 NOBITS region also has to be created.
Change-Id: Ibd480f82c1dc74e9cbb54eec07d7a8fecbf25433
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Since BL31 PROGBITS and BL31 NOBITS sections are going to be
in non-adjacent memory regions, potentially far from each other,
some fixes are needed to support it completely.
1. adr instruction only allows computing the effective address
of a location only within 1MB range of the PC. However, adrp
instruction together with an add permits position independent
address of any location with 4GB range of PC.
2. Since BL31 _RW_END_ marks the end of BL31 image, care must be
taken that it is aligned to page size since we map this memory
region in BL31 using xlat_v2 lib utils which mandate alignment of
image size to page granularity.
Change-Id: Ic745c5a130fe4239fa2742142d083b2bdc4e8b85
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
* changes:
Tegra194: platform handler for entering CPU standby state
Tegra194: memctrl: force viw and vifalr/w transactions as non-coherent
Tegra194: memctrl: fix bug in client order id reg value generation
Tegra194: memctrl: enable mc coalescer
Tegra194: update scratch registers used to read boot parameters
Tegra194: implement system shutdown/reset handlers
Tegra194: mce: support for shutdown and reboot
Tegra194: request CG7 before checking if SC7 is allowed
Tegra194: config to enable/disable strict checking mode
Tegra194: remove unused platform configs
Tegra194: restore XUSB stream IDs on System Resume
Remove the general BL31 mmap region: it duplicates the existing static
mapping for the entire SRAM region. Use the helper definitions when
applicable to simplify the code and add the MT_EXECUTE_NEVER flag.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I7a6b79e50e4b5c698774229530dd3d2a89e94a6d
Add new flags for storage support that must be used in the build
command line. Add the complete build steps for an OP-TEE configuration.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I0c682f6eb0aab83aa929f4ba734d3151c264aeed
Remove second flash node as only one must be used
by QSPI NOR driver.
Change-Id: I48189f2fdf4e0455aabe7d4cd9b2f3d36bb9cfb5
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
STM32MP1 platform is able to boot from SPI-NOR devices.
These modifications add this support using the new
SPI-NOR framework.
Change-Id: I75ff9eba4661f9fb87ce24ced2bacbf8558ebe44
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
STM32MP1 platform is able to boot from SPI-NAND devices.
These modifications add this support using the new
SPI-NAND framework.
Change-Id: I0d5448bdc4bde153c1209e8043846c0f935ae5ba
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Include the required FMC2 pinmux definition for the
NAND management.
Change-Id: I80333deacdf3444b2f21f17f2fb5919e569a3591
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
STM32MP1 platform is able to boot from raw NAND devices.
These modifications add this support using the new
raw NAND framework.
Change-Id: I9e9c2b03930f98a5ac23f2b6b41945bef43e5043
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
For STM32MP1, the address space is 4GB, which can be first divided
in 4 parts of 1GB. This LVL1 table is already mapped regardless
of MAX_XLAT_TABLES.
Fixing typo: Replace Ko to KB.
BL2/sp_min for platform STM32MP1 requires 4 MMU translation tables:
- a level2 table and a level3 table for identity mapped SYSRAM
- a level2 table mapping 2MB of BootROM runtime resources
- a level2 table mapping 2MB of secure DDR (case BL32 is OP-TEE)
Change-Id: If80cbd4fccc7689b39dd540d6649b1313557f326
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Device size could be more than 4GB, we must
define size as unsigned long long.
Change-Id: I52055cf5c1c15ff18ab9e157aa9b73c8b4fb7b63
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Add a new entry to find register properties by name and
include new assert functions to limit address cells to 1
and size cells to 1.
Change-Id: Ide59a795a05fb2af36bd07fec15e5a3adf196226
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Adds compilation flags to specify which drivers will be
embedded in the generated firmware.
Change-Id: Ie9decc89c3f26cf17e7148a3a4cf337fd35940f7
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Add the standard CLAMP macro. It ensures that
x is between the limits set by low and high.
If low is greater than high the result is undefined.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Ia173bb9ca51bc8d9a8ec573bbc15636a94f881f4
Imported from the LLVM compiler_rt library on master branch as of
30 Oct 2018 (SVN revision: r345645).
This is to get the __popcountsi2(si_int a) and __popcountdi2(di_int a)
builtin which are required by a driver that uses a __builtin_popcount().
Change-Id: I8e0d97cebdd90d224690c8ce1b02e657acdddb25
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
SPI-NOR framework is based on SPI-MEM framework using
spi_mem_op execution interface.
It implements read functions and allows NOR configuration
up to quad mode.
Default management is 1 data line but it can be overridden
by platform.
It also includes specific quad mode configuration for
Spansion, Micron and Macronix memories.
Change-Id: If49502b899b4a75f6ebc3190f6bde1013651197f
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
This framework supports SPI-NAND and is based on the
SPI-MEM framework for SPI operations. It uses a common high
level access using the io_mtd.
It is limited to the read functionalities.
Default behavior is the basic one data line operation
but it could be overridden by platform.
Change-Id: Icb4e0887c4003a826f47c876479dd004a323a32b
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
The raw NAND framework supports SLC NAND devices.
It introduces a new high level interface (io_mtd) that
defines operations a driver can register to the NAND framework.
This interface will fill in the io_mtd device specification:
- device_size
- erase_size
that could be used by the io_storage interface.
NAND core source file integrates the standard read loop that
performs NAND device read operations using a skip bad block strategy.
A platform buffer must be defined in case of unaligned
data. This buffer must fit to the maximum device page size
defined by PLATFORM_MTD_MAX_PAGE_SIZE.
The raw_nand.c source file embeds the specific NAND operations
to read data.
The read command is a raw page read without any ECC correction.
This can be overridden by a low level driver.
No generic support for write or erase command or software
ECC correction.
NAND ONFI detection is available and can be enabled using
NAND_ONFI_DETECT=1.
For non-ONFI NAND management, platform can define required
information.
Change-Id: Id80e9864456cf47f02b74938cf25d99261da8e82
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
* changes:
zynqmp: pm: clock: Move custom flags to typeflags
zynqmp: pm: clock: Add support for custom type flags
plat: xilinx: zynqmp: Add GET_CALLBACK_DATA function
zynqmp: pm: Remove CLK_TOPSW_LSBUS from invalid clock list
steven kao
Varun Wadekar
Mark Dykes
Alexei Fedorov
laurenw-arm
Manish Pandey
Sandrine Bailleux
Soby Mathew
Andre Przywara
Madhukar Pappireddy
Olivier Deprez
Samuel Holland
Lionel Debieve
Nicolas Le Bayon