Add virtio-net and virtio-9p devices to the devicetree without the
status set. This ensures that the MMIO frame is set, and it is not
fatal to start the driver initialisation procedure, which will
typically bail out if it finds zero virtqueues.
Add the virtio-rng device with status disabled. The disabled status
is chosen because the FVP models have only supported this since 2022
and older models would trigger an external abort when trying to access
or probe this MMIO region.
This is included by the fvp-base devicetrees.
Change-Id: Ia0a853533bb5d619a3d415e35b3217ad3a978ada
Signed-off-by: Diego Sueiro <Diego.Sueiro@arm.com>
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Add stdout-path to the fvp-base devicetree to be passed to BL33 (U-Boot)
and then to the Linux kernel to be compliant to Arm SystemReady IR:
https://developer.arm.com/documentation/DUI1101/2-0/
Configure-U-Boot-for-SystemReady/Adapt-the-Devicetree
This has been tested by booting fvp-base to Linux and ensuring the
console is accessible.
Change-Id: Iae98630f18f735ce344c1158f41f358c2a49eeb6
Signed-off-by: Diego Sueiro <Diego.Sueiro@arm.com>
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
This is an alignment with Linux DT files that have been merged in
stm32 tree [1], and will be in Linux 6.7.
The /omit-if-no-ref/ in overlay files are now removed, as already in
pinctrl files.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iab94b0ba7a4a0288ca53d1ae57ab590566967415
Three packages exist for stm32mp25 dies. As ball-out is different
between them, this patch covers those differences by introducing
dedicated pinctrl dtsi files. Each dtsi pinctrl package file
describes the package ball-out through gpio-ranges.
Available packages are:
STM32MP25xAI: 18*18/FCBGA 172 ios
STM32MP25xAK: 14*14/FCBGA 144 ios
STM32MP25xAL: 10*10/TFBGA 144 ios
It includes also the common file used for pin groups definition.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I8500ccccb7a96748f36ffc80edc91da8595f4da8
STM32MP25 family is composed of 4 SoCs defined as following:
-STM32MP251: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, PCIe, USB3, parallel and DSI display,
1*ETH ...
-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH,
CAN-FD and LVDS display.
-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).
A second diversity layer exists for security features/ A35 frequency:
-STM32MP25xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Change-Id: Icd1351e20b862675d257dede55df190a90acbd59
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The build flags to enable the Arm(R) Ethos(TM)-N NPU driver are in arm
platform specific make files i.e. plat/arm/common/arm_common.mk. These
flags are renamed and moved to ethosn_npu.mk. Other source and make
files are changed to reflect the changes in these flags.
Signed-off-by: Rajasekaran Kalidoss <rajasekaran.kalidoss@arm.com>
Change-Id: I6fd20225343c574cb5ac1f0f32ff2fc28ef37ea6
Add support for Morello I2S audio subsystem. This includes adding the
audio formatter and I2S transmitter nodes and gluing them together with
the hdmi codec using a simple sound card machine node.
Change-Id: I3de4b06ef965c8e0555d074118b944fe6b4b78bb
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Signed-off-by: Faiz Abbas <faiz.abbas@arm.com>
Device tree alignment with kernel and latest binding for BSEC node:
the rev2.0 is used on STM32MP13x devices with the new compatible
compatible = "st,stm32mp13-bsec".
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I62c4090ae5d5c1de901e6df1e8ea5d1a3296a272
To keep (as much as possible) alignment with Linux DT, move the
/omit-if-no-ref/ keywords to DT overlay files (fdts/stm32mp1*-bl*.dtsi).
This also ease checks for ST tools.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ib467a6b65f05a84c9678799ad32e1820249b4ed1
Use /omit-if-no-ref/ keyword in DT to remove extra device nodes only
when they are not used / not referenced.
If the board device tree only defines subnodes, dtc does not consider it
as usage, you have to specifically mention device's phandle, e.g.:
\ {
i2c6-phandle = <&i2c6>;
};
or in aliases section
aliases {
i2c6 = &i2c6;
};
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I431ecd93576f97fd021d82d23b93c659fc8f26b8
Adds additional asset allocators to the device tree include
file as the non-secure world kernel module for the Arm(R)
Ethos(TM)-N NPU now fully supports having and using multiple
asset allocators.
Signed-off-by: Joshua Pimm <joshua.pimm@arm.com>
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I82d53667ef64968ee814f611d0a90abd3b3cf3de
With the /omit-if-no-ref/ keyword in DT, the non-referenced nodes
are just removed. This allows reducing the size of device tree blobs.
Setting it before pins node allows a size reduction of more than 2kB.
The corresponding nodes can also be removed from BL2 and BL32 DT
overlays.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I6b4a4d227d5592e1d253a1b35da2dafaac2ddcae
FVP PMUv3 SPIs legacy interrupts are only listed for
cluster #0 and are missing for cluster #1.
This patch changes FVP SPIs to PMUv3 PPI as in
arm_fpga.dtsi, morello.dtsi and n1sdp.dtsi.
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Change-Id: Ic624cec09ba932666c746ae1a6a4b78b6decde96
Add one device tree to support a family of boards (PRTT1C, PRTT1S,
PRTT1A) based on STM32MP151AAD3, used as sensors and actuators for
industrial, 10BaseT1L based networks.
This change was tested with barebox 2022.12.0 bootloader and kernel
v6.2.0-rc1.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Change-Id: Ibab9933eadd7aa379ae0a7c7ccbfc2fbb9a44ca8
The L3 cache in the DSU supports the Memory System Resources
Partitioning and Monitoring (MPAM). The MPAM specific registers in the
DSU are accessed through utility bus of DSU that are memory mapped from
0x1_0000_1000.
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
Change-Id: I2798181d599228e96dd4c0043a2ccd94668c7e20
The onkey and watchdog features of the PMIC are not used in TF-A for
STM32MP15 boards. Remove the nodes from DT.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2933e0bdc5843fcb549a817742106d9c66097869
Update SoC DT file STM32MP151 to use interrupts-extended instead of
interrupts for i2c2. This correct a compilation warning:
build/stm32mp1/debug/fdts/stm32mp157c-ev1-bl2.pre.dts:23.3-26:
Warning (interrupts_property): /soc/i2c@40013000:#interrupt-cells:
size is (28), expected multiple of 12
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: If512807cd23c72f95e1e02b15f30d20a849d8412
Remove extra spaces before the closing brace of vbus_otg node in
stm32mp157c-ed1 DT file, before the vbus_sw label, and before the
closing brace of vbus_sw node.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2e77e0a043594876551ed8d77ed3d13f6a098c81
Increase TC_TZC_DRAM1_SIZE for Trusty image and its memory size.
Update OP-TEE reserved memory range in DTS
Change-Id: Iad433c3c155f28860b15bde2398df653487189dd
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
make it part of the restricted dma pool to ensure it is not used for
general dma operations.
Change-Id: Ia14738de70b4d7719d7460ed8d16e727aea8d8c4
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
This patch adds support for RMM granules allocation
in FVP 2nd DRAM 2GB bank at 0x880000000 base address.
For ENABLE_RME = 1 case it also removes "mem=1G"
Linux kernel command line option in fvp-base-psci-common.dsti
to allow memory layout discovery from the FVP device tree.
FVP parameter 'bp.dram_size' - size of main memory in gigabytes
documented in docs/components/realm-management-extension.rst
is changed from 2 to 4.
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Change-Id: I174da4416ad5a8d41bf0ac89f356dba7c0cd3fe7
The code managing legacy boot (without FIP) that was under
STM32MP_USE_STM32IMAGE flag is remove.
Change-Id: I04452453ed84567b0de39e900594a81526562259
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Remove the secure status for PKA and SAES entries.
The peripherals are used in BL2 at EL3, context will
remain secure only.
Change-Id: I79d95bc55a9afd27f295249936d7bc332c777f5e
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Add the stm32mp1 CoT description file. Include the TRUSTED_BOARD_BOOT
entry in the platform device tree file.
Add the missing public root key reference for stm32mp15 and the
encryption key reference for stm32mp13.
Change-Id: I0ae2454979a3df6dd3e4361510317742e8fbc109
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
The arm,vexpress,config-bus DT binding restricts the possible (sub)node
names.
Adjust the current node names, to drop the unneeded address specifier,
and make the node names binding compliant.
Change-Id: Ic48c6969268c960ce92c8ec3a756ed1d89e61b08
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
When firmware implements idle states via PSCI, the value of the DT
entry-method property must be "psci", not "arm,psci".
Fix this to make the CPU description binding compliant.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Icd1bf704d177368af9b7aab545f47e580791b8cc
The arm,armv7-timer-mem DT binding documentation demands that the
#size-cells property should be <1> only.
Adjust the value to be <1> and drop the now needless leading 0 in the
frame's reg property. Convert to #address-cell = <1> on the way.
Also adjust the interrupts property to use the proper GIC macros.
Change-Id: Ia2224663b1e6aaa7cf94af777473641de6a840d2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The existing DT files for the base FVP model are having some issues,
that lead to warnings reported by the device tree compiler.
Those (and many other issues around (updated) DT binding compliance)
were fixed in the Linux kernel tree, so let's sync those files back into
TF-A.
We cannot copy the files "as is" for now, since we rely on certain custom
properties to be added (max-pwr-lvl in the PSCI node, SDEI nodes, etc).
Merge in the changed parts of the Linux kernel DT (from Linux v6.0-rc1),
and rework the base file to allow including the motherboard.dtsi
unchanged. This should make any future update less painful.
As this also affects the FVP VE boards (Cortex-A7 and Cortex-A5), since
they share the motherboard include file, fix them up as well.
Change-Id: I4f74d05e5583747f8849e32f246f74aeec7a9c60
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The GICv2 and GICv3 version of the FVP DT files are unnecessarily split,
as the common part of the peripherals is the same: it's literally just
the interrupt controller node that is different.
Since the GICv3 versions now use a generic DT include file (without any
GIC node), let's reuse that for the GICv2 versions of the FVP as well.
We just add a separate fvp-base-gicv2.dtsi file which describes the
GICv2 interrupt controller. Also shorten the compatible string, since
the GICv2 binding documentation does not allow the current combination.
This allows to remove the mostly redundant nodes from the GICv2 .dts
file.
Change-Id: I9018031bb611fb00ca7dbefc1bff7d40c3f05819
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The GICv2 and GICv3 version of the FVP DT files are unnecessarily split,
as the common part of the peripherals is the same: it's literally just
the interrupt controller node that is different.
To facilitate a unification, refactor the DT include files to explicitly
include a snippet with just the GICv3 description, and a generic base DT
file for the rest. This generic file can then be reused by the GICv2
versions later.
Since we can only have a /memreserve/ entry *before* any DT nodes, move
that line to each file, to allow including the GIC DT file separately.
Change-Id: I9ff357d3fe0ce46e280c30131aeae97a99631512
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Conceptually the DT is a hardware description, as such it's independent
from the instruction set that a DT client uses. So having separate DTs
for aarch32 and aarch64 does not make sense and is not needed.
Probably due to historic reasons (a Linux bug fixed in 2016 with Linux
commit ba6dea4f7ced, in Linux v4.8) the CPU reg property was using a
different size between aarch64 and aarch32, even though the size of it
is solely governed by the parent's #address-cells property.
Consolidate this to be always 2, and always use two cells to describe
the CPU's MPIDR register.
This removes the last difference of the -aarch32 versions of the FVP
DT files, so just remove all of them. The respective versions without
that suffix can now be used with AArch32 DT clients as well.
Also remove the respective part in the documentation.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I45d3a2cbba8e04595a741e1cf41900377952673e
For no real reason we were shipping two separate DT include files for the
base FVP motherboard peripherals, one for aarch32, one for aarch64.
There is no difference in the hardware description when using a
different instruction set, and the diff between the two files was about
a missing interrupt map for the 64-bit DT files.
Consolidate the situation by just using a single motherboard .dtsi file,
which relies on an interrupt map by the including files.
Provide that map in the two files where it was missing before, and
change the filenames to let all users include the same file now.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: I19b77ecc8da9b4bfbd61d02f910b9ab05dbf92e9
The DT files for the Cortex-A5 and Cortex-A7 FVP models include the
shared rtsm_ve-motherboard.dtsi file, which we need to sync with the
upstream Linux version soon.
To prepare for its changed structure there, adjust the top-level
#address-cells and #size-cells properties to be compatible with the
expectations of the Linux version.
Also extend the interrupt map to cover all peripherals listed in the
motherboard file, and use the proper GIC macros to make them more
readable on the way.
Change-Id: I7d1493f1a200e8350530f912833f9ffcc5f94b21
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The PSCI DT nodes used for the various fvp-base model variants provide
explicit function IDs, as required for the pre-v0.2 PSCI specification.
This prevents them from being used from both AArch32 and AArch64 DT
clients, and using this version of the PSCI spec is long deprecated
anyway.
Remove the old compatible string and the function properties, to
force clients to use the standard function IDs as described in the PSCI
spec. sys_poweroff and sys_reset were never standardised or used anyway.
There should be no client software around that cannot deal with PSCI
v0.2.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ie87deb9898eae79b7307c15bcefcd4b311d4dc22
The Arm(R) Ethos(TM)-N NPU driver now supports configuring the SMMU
streams that the NPU shall use and will therefore no longer delegate
access to these registers to the non-secure world. In order for the
driver to support this, the device tree parsing has been updated to
support parsing the allocators used by the NPU and what SMMU stream that
is associated with each allocator.
To keep track of what NPU device each allocator is associated with, the
resulting config from the device tree parsing will now group the NPU
cores and allocators into their respective NPU device.
The SMC API has been changed to allow the caller to specify what
allocator the NPU shall be configured to use and the API version has
been bumped to indicate this change.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I6ac43819133138614e3f55a014e93466fe3d5277
Converted the space indentation to tabs to fix the
errors listed under tf-static-checks CI job.
Change-Id: Ie911a5befd0eeaa5a2019245cc3c43ad375cd068
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
If not mentioned explicitly, numa-node-id for pcie_ctlr
is assigned as unknown. With this patch pcie_ctlr and
ccix_pcie_ctlr are assigned numa-node-id=0 and
pcie_secondary_ctlr is assigned numa-node-id=1.
Signed-off-by: sahil <sahil@arm.com>
Change-Id: I533abdd6ea162df7b15ee04cbfc48ba7a544b91a
The node is currently not used in TF-A. Remove it.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iedc4745f155ebb9c80132311a8623e4498f0689f
For peripheral where both status and secure-status are set to okay,
the function fdt_get_status() returns the same status (DT_SHARED) if
secure-status property is omitted. This secure-status property can then
be removed in boards DT files for iwdg nodes.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I9f9360842d4d41288db0cf1b92063f347c72d137
Debbie Martin
Yann Gautier
Gabriel Fernandez
Alexandre Torgue
sahil
Anurag Koul
Rajasekaran Kalidoss
Faiz Abbas
Werner Lewis
Patrick Delaunay
Yann Gautier
Vyacheslav Yurkov
Joshua Pimm
AlexeiFedorov
David Jander
Patrik Berglund
Rupinderjit Singh
Davidson K
Arunachalam Ganapathy
Lionel Debieve
Andre Przywara
Mikael Olsson
Jayanth Dodderi Chidanand