Cortex-A510 erratum 2042739 is a Cat B erratum that applies to revisions
r0p0, r0p1 and r0p2 and is fixed in r0p3.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I1d2ebee3914396e1e298eb45bdab35ce9e194ad9
Cortex-A510 erratum 2288014 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0, and is fixed in r1p1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I875519ff55be90244cc3d3a7e9f7abad0fc3c2b8
Cortex-A510 erratum 1922240 is a Cat B erratum that applies to revision
r0p0 and is fixed in r0p1.
Since no errata framework code existed for A510 prior to this patch, it
has been added as well. Also some general cleanup changes in the CPU lib
makefile.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I8c427ef255cb4b38ed3e5c2c7444fcef957277e4
Cortex-A710 erratum 2136059 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[44] to 1 which will cause
the CPP instruction to invalidate the hardware prefetcher state
trained from any EL.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I43a86a365418fb663cc1b6ab1d365b4beddae0bc
Cortex-A710 erratum 2267065 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR_EL1[22] to 1'b1. Setting
CPUACTLR_EL1[22] will cause the CFP instruction to invalidate
all branch predictor resources regardless of context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ia9085aaf9b2b6a2b25d03ab36bd3774839fac9aa
Cortex-X2 erratum 2216384 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[17] to 1'b1 followed by
applying an instruction patching sequence.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I3c216161678887c06a28c59644e784e0c7d37bab
Cortex-X2 erratum 2081180 is a Cat B erratum present in r0p0, r1p0
and r2p0 of the Cortex-X2 processor core.
Cortex-X2 SDEN: https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I64bed2fd5b7e12932d6de2ae668786e689885188
Cortex-X2 erratum 2017096 is a Cat B erratum that applies to
revisions r0p0, r1p0 & r2p0. The workaround is to set CPUECLTR_EL1[8]
to 1 which disables store issue prefetching.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I3b740aedc95c2394f6b8d1186014d2b2f640ae05
Replace wrong %d with the correct types.
This issue was found with the compilation flag:
-Wformat-signedness
Change-Id: Iec3817a245f964ce444b59561b777ce06c51a60a
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Instead of transmitting an 'enum stm32mp_osc_id', just send
directly the clock name with a 'const char *'
Change-Id: I866b05cbb1685a9b9f80e63dcd5ba7b1d35fc932
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
In case of programmer mode, the bootrom manages to auto-detect
HSE clock configuration. In order to detect a bad device tree
setting in BL2, it will crash during programming if the configuration
is not aligned with the auto-detection.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I230697695745d6282d14b1ebfa6e4c4caa0cd8e2
Support "disabled" status for oscillator in device tree.
At boot time, the clock tree initialization performs the following
tasks:
- enabling of the oscillators present in the device tree and not
disabled,
- disabling of the HSI oscillator if the node is absent or disabled
(always activated by bootROM).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I176276022334f3d97ba0250b54062f0ae970e239
Add a function to get PLL settings from DT:
"cfg" property is mandatory, an error is generated if not found.
"frac" is optional, default value is returned if not found.
"csg" is optional too, a boolean value indicates if it has been
found, and its value is updated.
Store each PLL node validity information, this avoids parsing DT
several times.
Change-Id: I039466fbe1e67d160f7112814e7bb63b661804d0
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
* changes:
feat(stm32mp1): enable BL2_IN_XIP_MEM to remove relocation sections
refactor(stm32mp1): reduce MMU memory regions and split XLAT by context
feat(st): map 2MB for ROM code
fix(stm32mp1): restrict DEVICE2 mapping in BL2
Add L1PCTL field definiton in register CPUACTLR_EL1.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iebfb240ac58aa8f3dc870804bf4390dfbdfa9b95
Because the BL2 is not relocated, the usage of BL2_IN_XIP_MEM
can be used. It reduces the binary size by removing all relocation
sections. XIP will not be used when STM32MP_USE_STM32IMAGE is
defined. Introduce new definitions for SEPARATE_CODE_AND_RODATA.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Ifd76f14e5bc98990bf84e0bfd4ee0b4e49a9a293
Simplify the BL2 MMU mapping and reduce the memory regions
number. Split the XLAT define between BL2 and BL32 as binaries
do not share the same tables anymore.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaf09e72b4cc29acbe376f6f1cd2a8116c793ba26
This allows reducing MMU tables, and as there is nothing after ROM code
in memory mapping, this has no impact.
Change-Id: If51facb96a523770465cb06eb1ab400f75d26db3
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Only NAND memory map area can be of interest for BL2 in the
DEVICE2 area. Map DEVICE2 under STM32MP_RAW_NAND flag.
Change-Id: I7e3b39579e4a2525b25cb1987d6ec38038d0de2b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change BL31 load address to 0x970000. This was done by Change-Id
I96d572fc. But then changed back to 0x960000 by Change-Id I8308c629.
However, 0x970000 is the correct value thus we change it back again.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Change-Id: Ia0db4877123b89072f723d18e2bcce25ef38f47d
* changes:
refactor(st-ddr): move basic tests in a dedicated file
refactor(st-ddr): reorganize generic and specific elements
feat(stm32mp1): allow configuration of DDR AXI ports number
refactor(st-ddr): update parameter array initialization
feat(st-ddr): add read valid training support
refactor(stm32mp1): remove the support of calibration result
fix(st-ddr): correct DDR warnings
As the UART is already initialized, no need to check for UART clock
or reset in next BL. An issue can appear if the next BL device tree
(e.g HW_CONFIG) doesn't use the same clocks or resets (like SCMI ones).
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I044ef2386abe2d3dba5a53c3685440d64ca50a4f
This patch includes the errata workaround for erratum
1868343 for the Morello platform.
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Change-Id: Ifea8148e10946db2276560f90bf2f32bf12b9dcc
Rainier CPU is based on Neoverse N1 R4P0 version which exhibits
the erratum 1868343. This patch inherits the workaround from
neoverse_n1.S file into rainier.S file for erratum 1868343.
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Change-Id: I735595229716a77d26369943086de08384cafa70
* changes:
feat(plat/rcar3): update IPL and Secure Monitor Rev.3.0.3
feat(plat/rcar3): modify type for Internal function argument
feat(plat/rcar3): modify sequence for update value for WUPMSKCA57/53
fix(plat/rcar3): fix to bit operation for WUPMSKCA57/53
These basic tests are generic and should be used independently of the
driver, depending on the plaftorm characteristics.
Change-Id: I38161b659ef2a23fd30a56e1c9b1bd98461a2fe4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
stm32mp_ddrctl structure contains DDRCTRL registers definitions.
stm32mp_ddr_info contains general DDR information extracted from DT.
stm32mp_ddr_size moves to the generic side.
stm32mp1_ddr_priv contains platform private data.
stm32mp_ddr_dt_get_info() and stm32mp_ddr_dt_get_param() allow to
retrieve data from DT. They are located in new generic c/h files in
which stm32mp_ddr_param structure is declared. Platform makefile
is updated.
Adapt driver with this new classification.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I4187376c9fff1a30e7a94407d188391547107997
A new flag STM32MP_DDR_DUAL_AXI_PORT is added, and enabled by default.
It will allow choosing single or dual AXI ports for DDR.
Change-Id: I48826a66a6f4d18df87e081c0960af89ddda1b9d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Force alignment of the size of parameters array with the expected
value by the binding.
The registers dynamic structs are removed as not used in TF-A.
Change-Id: I7a41f355a435f54fbf23f468cca87c7f8f7e69e8
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the read data eye training = training for optimal read valid placement
(RVTRN) when the built-in calibration is executed for LPDDR2 and LPDDR3.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I7ac1c77c21ebc30315b532741f2f255c2312d5b2
The support of a predefined DDR PHY tuning result is removed for
STM32MP1 driver because it is not needed at the supported frequency
when built-in calibration is executed.
The calibration parameters were provided in the device tree by the
optional node "st,phy-cal", activated in ddr helper file by the
compilation flag DDR_PHY_CAL_SKIP and filled with values generated
by CubeMX.
This patch
- updates the binding file to remove "st,phy-cal" support
- updates the device trees and remove the associated defines
- simplifies the STM32MP1 DDR driver and remove the support of
the optional "st,phy-cal"
After this patch the built-in calibration is always executed.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I3fc445520c259f7f05730aefc25e64b328bf7159
Replace %d with %u in logs, to avoid warning when
-Wformat-signedness is enabled.
And correct the order of includes.
Change-Id: I7c711a37fc1deceb8853831a8a09ae50422859c9
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Refactor the GPIO code to use a small lookup table instead of redundant or
repetitive code.
Signed-off-by: Jona Stubbe <tf-a@jona-stubbe.de>
Change-Id: Icf60385095efc1f506e4215d497b60f90e16edfd
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
The issue was reported by Coverity [1]. The return of the functions
regulator_disable() and regulator_enable() was not checked.
If they fail, this means there is an issue either with PMIC or I2C.
The board should the stop booting with a panic().
[1] https://scan4.scan.coverity.com/reports.htm#v47771/p11439/mergedDefectId=374565
Change-Id: If5dfd5643c210e03ae4b1f4cab0168c0db89f60e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
johpow01
Bipin Ravi
Madhukar Pappireddy
Manish Pandey
Yann Gautier
Gabriel Fernandez
Lionel Debieve
Patrick Delaunay
Nicolas Le Bayon
Joanna Farley
Jiafei Pan
jason-ch chen
Yann Gautier
Ying-Chun Liu (PaulLiu)
André Przywara
Manoj Kumar
Nicolas Le Bayon
Patrick Delaunay
Rex-BC Chen
Jona Stubbe