This patch adds SPP/EMU platform support for Xilinx Versal and
also updating the documentation.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ibdadec4d00cd33ea32332299e7a00de31dc9d60b
As per change [1], now HW_CONFIG gets loaded in secure and
non-secure memory. Hence updated the documentation to show
secure and non-secure load region of HW_CONFIG in FVP Arm
platform.
Additionally, added a note on how FW_CONFIG address gets
passed from BL2 to BL31/SP_MIN.
[1]: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/14620
Change-Id: I37e02ff4f433c87bccbe67c7df5ecde3017668b9
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added a description for the newly introduced 'ns-load-address' property
in the dtb-registry node of FCONF.
Change-Id: Ief8e8a55a6363fd42b23491d000b097b0c48453b
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Update the make command with the RESET_TO_BL31=1 addition.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I46cc81abb539773706348464b3061d20d94522e9
TB_FW_CONFIG DT no longer contains the address of HW_CONFIG; it has
been moved to the FW_CONFIG DT since the introduction of FCONF.
Hence updated the documentation accordingly.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I37b68502a89dbd521acd99f2cb3aeb0bd36a04e0
Upgrade to the latest and greatest 2.x release of Mbed TLS library
(i.e. v2.28.0) to take advantage of their bug fixes.
Note that the Mbed TLS project published version 3.x some time
ago. However, as this is a major release with API breakages, upgrading
to 3.x might require some more involved changes in TF-A, which we are
not ready to do. We shall upgrade to mbed TLS 3.x after the v2.7
release of TF-A.
Change-Id: I887dfd87893169c7be53b986e6c43338d15949d7
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Right now, TF-A documentation recommends downloading Arm compilers
from:
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
However, this page is now deprecated, as indicated by the banner at
the top of the page. When navigating to the new recommended page, one
can see the following note, which provides the rationale for the
deprecation:
GNU Toolchain releases from Arm were published previously as two
separate releases - one for A-profile and the other for R & M
profiles (GNU Toolchain for A-profile processors and GNU Arm
Embedded Toolchain).
Arm GNU Toolchain releases unifies these two into a single release
and the previous way of releases therefore have been
discontinued. However, the previous releases will continue to be
available for reference.
This patch updates the link to the new recommended place for compiler
downloads.
Change-Id: Iefdea3866a1af806a5db2d2288edbb63c543b8ee
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Add Sieu Mun Tang and Benjamin Jit Loon Lim as new
Intel SocFPGA platform maintainers and remove the
rest of the Intel SocFPGA platform maintainers.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ieb9a35e278d70a12351aaccab90ddc7be09dc861
With the transition to mailman3, the URLs of TF-A and TF-A Tests
mailing lists have changed. However, we still refer to the old
location, which are now dead links.
Update all relevant links throughout the documentation.
There is one link referring to a specific thread on the TF-A mailing
list in the SPM documentation, for which I had to make a guess as to
what's the equivalent mailman3 URL. The old URL scheme indicates that
the thread dates from February 2020 but beyond that, I could not make
sense of the thread id within the old URL so I picked the most likely
match amongst the 3 emails posted on the subject in this time period.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Reported-by: Kuohong Wang <kuohong.wang@mediatek.com>
Change-Id: I83f4843afd1dd46f885df225931d8458152dbb58
The current implementation uses plat_arm API under generic code.
"plat_arm" API is a convention used with Arm common platform layer
and is reserved for that purpose. In addition, the function has a
weak definition which is not encouraged in TF-A.
Henceforth, removing the weak API with a configurable macro "TWED_DELAY"
of numeric data type in generic code and simplifying the implementation.
By default "TWED_DELAY" is defined to zero, and the delay value need to
be explicitly set by the platforms during buildtime.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I25cd6f628e863dc40415ced3a82d0662fdf2d75a
Introduce build flag for enabling the secure partition
manager core, SPMC_AT_EL3. When enabled, the SPMC module
will be included into the BL31 image. By default the
flag is disabled.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I5ea1b953e5880a07ffc91c4dea876a375850cf2a
This toolchain provides multiple cross compilers and is publicly
available on developer.arm.com.
We build TF-A in CI using:
AArch32 bare-metal target (arm-none-eabi)
AArch64 ELF bare-metal target (aarch64-none-elf)
Change-Id: Ia14de2c7d9034a6f0bc56535e961fffc81bcbf29
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Cortex-X2 erratum 2147715 is a Cat B erratum that applies to revision
r2p0 and is fixed in r2p1. The workaround is to set CPUACTLR_EL1[22]=1,
which will cause the CFP instruction to invalidate all branch predictor
resources regardless of context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I2d81867486d9130f2c36cd4554ca9a8f37254b57
Adding the newly introduced build flags for feature enablement of the
following features:
1.FEAT_AMUv1p1 - ENABLE_FEAT_AMUv1p1
2.FEAT_CSV2_2 - ENABLE_FEAT_CSV2_2
3.FEAT_VHE - ENABLE_FEAT_VHE
4.FEAT_DIT - ENABLE_FEAT_DIT
5.FEAT_SB - ENABLE_FEAT_SB
6.FEAT_SEL2 - ENABLE_FEAT_SEL2
Also as part of feature detection mechanism, we now support three
states for each of these features, allowing the flags to take either
(0 , 1 , 2) values. Henceforth the existing feature build options are
converted from boolean to numeric type and is updated accordingly
in this patch.
The build flags take a default value and will be internally enabled
when they become mandatory from a particular architecture version
and upwards. Platforms have the flexibility to overide this
internal enablement via this feature specific explicit build flags.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I0090c8c780c2e7d1a50ed9676983fe1df7a35e50
Add a dummy realm attestation key to RMMD, and return it on request.
The realm attestation key is requested with an SMC with the following
parameters:
* Fid (0xC400001B2).
* Attestation key buffer PA (the realm attestation key is copied
at this address by the monitor).
* Attestation key buffer length as input and size of realm
attesation key as output.
* Type of elliptic curve.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I12d8d98fd221f4638ef225c9383374ddf6e65eac
Update document for nxp-layerscape to add ls1088a SoC and ls1088ardb,
update maintainer of ls1088a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ic7fdc7b1bbf22e50646991093366a88ee523ffe3
Add new options SEPARATE_BL2_NOLOAD_REGION to separate no-loadable
sections (.bss, stack, page tables) to a ram region specified
by BL2_NOLOAD_START and BL2_NOLOAD_LIMIT.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I844ee0fc405474af0aff978d292c826fbe0a82fd
Add a dummy platform token to RMMD and return it on request. The
platform token is requested with an SMC with the following parameters:
* Fid (0xC40001B3).
* Platform token PA (the platform token is copied at this address by
the monitor). The challenge object needs to be passed by
the caller in this buffer.
* Platform token len.
* Challenge object len.
When calling the SMC, the platform token buffer received by EL3 contains
the challenge object. It is not used on the FVP and is only printed to
the log.
Signed-off-by: Mate Toth-Pal <mate.toth-pal@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: I8b2f1d54426c04e76d7a3baa6b0fbc40b0116348
Cortex A78 AE erratum 2395408 is a Cat B erratum that applies
to revisions <= r0p1. It is still open.
This erratum states, "A translation table walk that matches an
existing L1 prefetch with a read request outstanding on CHI might
fold into the prefetch, which might lead to data corruption for
a future instruction fetch"
This erratum is avoided by setting CPUACTLR2_EL1[40] to 1 to
disable folding of demand requests into older prefetches with
L2 miss requests outstanding.
SDEN is available at https://developer.arm.com/documentation/SDEN-1707912
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ic17968987ca3c67fa7f64211bcde6dfcb35ed5d6
Cortex A78 AE erratum 2376748 is a Cat B erratum that applies
to revisions <= r0p1. It is still open.
The erratum states, "A PE executing a PLDW or PRFM PST instruction
that lies on a mispredicted branch path might cause a second PE
executing a store exclusive to the same cache line address to fail
continuously."
The erratum is avoided by setting CPUACTLR2_EL1[0] to 1 to force
PLDW/PFRM ST to behave like PLD/PRFM LD and not cause invalidations
to other PE caches. There might be a small performance degradation
to this workaround for certain workloads that share data.
SDEN is available at https://developer.arm.com/documentation/SDEN-1707912
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I93bd392a870d4584f3e12c8e4626dbe5a3a40a4d
STM32MP13 is a variant of STM32MP1, with a single Cortex-A7, and no
Cortex-M4.
There is only one DDR port.
SP_min is not supported, only OP-TEE can be used as monitor.
STM32MP13 uses the header v2.0 format for stm32image generation
for BL2.
Change-Id: Ie5b0e3230c5e064fe96f3561fc5b3208914dea53
Signed-off-by: Yann Gautier <yann.gautier@st.com>
DEBUG mode can be enabled without any issue for Armada 37xx and also for
other A7K/A8K/CN913x. There is no incompatibility with Xmodem protocol
like it was written before, because Armada 37xx UART images do not print
anything on UART during image transfer and A7K/A8K/CN913x BLE image
automatically turn off debugging output when booting over UART. Looks
like this incorrect information is some relict from the past.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I85adc3c21036656b4620c4692e04330cad11ea2f
Cortex-A710 erratum 2282622 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r2p0, and is fixed in r2p1. The workaround is to set
CPUACTLR2_EL1[0] to 1, which will force PLDW/PFRM ST to behave like
PLD/PRFM LD and not cause invalidations to other PE caches.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ic48409822536e9eacc003300036a1f0489593020
Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I000df70c10b2b4dac1449556596f9820c36cf243
Following updates done
- Clarification on building Hafnium
- New test suite "Invalid memory access"
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I04a934a648d53a860f06cd6cf3776ee534675bd9
Cortex-A510 erratum 2172148 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0, and is fixed in r1p1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I1784d643ca3d1d448340cd421facb5f229df1d22
Cortex-A510 erratum 2218950 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0, and is fixed in r1p1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Icb6e369946f8978a08cf8ed5e4452782efb0a77a
Cortex-A510 erratum 2250311 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0 and is fixed in r1p1.
This erratum workaround is a bit different because it interacts with a
feature supported in TFA. The typical method of implementing an errata
workaround will not work in this case as the MPMM feature would just be
re-enabled by context management at every core power on after being
disabled by the errata framework. So in addition to disabling MPMM, this
workaround also sets a flag in the MPMM runtime framework indicating
that the feature should not be enabled even if ENABLE_MPMM=1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7805756e65ec90b6ef8af47e200617c9e07a3a7e
This patch submits an RFC to refactor the context management
mechanism in TF-A.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: Ia1ad5a85cb86c129e2feaf36bed123f0067c3965
Cortex-A510 erratum 2041909 is a Cat B erratum that applies to revision
r0p2 and is fixed in r0p3. It is also present in r0p0 and r0p1 but there
is no workaround in these revisions.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7b1498faa0c79488dee0d11d07f6e9f58144e298
Cortex-A510 erratum 2042739 is a Cat B erratum that applies to revisions
r0p0, r0p1 and r0p2 and is fixed in r0p3.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I1d2ebee3914396e1e298eb45bdab35ce9e194ad9
Cortex-A510 erratum 2288014 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0, and is fixed in r1p1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I875519ff55be90244cc3d3a7e9f7abad0fc3c2b8
Cortex-A510 erratum 1922240 is a Cat B erratum that applies to revision
r0p0 and is fixed in r0p1.
Since no errata framework code existed for A510 prior to this patch, it
has been added as well. Also some general cleanup changes in the CPU lib
makefile.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I8c427ef255cb4b38ed3e5c2c7444fcef957277e4
On Debian systems it is possible to use system-wide Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ib01d9376776b8afcb1ca46c16076e28c3d2e581d
Update document for nxp-layerscape to add ls1046a SoC and ls1046ardb,
ls1046afrwy board support.
Also update maintainer of ls1046a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I522f978bc93aa8d1f1d60fa8efef392b7d854df7
Armada 3720 BootROM searches for GPT partition with partition type GUID
6828311A-BA55-42A4-BCDE-A89BB5EDECAE and completely ignores GPT
partition name. It does not check for "MARVELL BOOT PARTITION".
This fact is incorrectly documented even in official Marvell Armada 3700
Functional Specification.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I35279f39de2d12148fc16f2730a9a074dc0b58eb
diphda platform is now being renamed to corstone1000.
These changes are to replace all the instances and traces
of diphda corstone1000.
Change-Id: I330f3a112d232b99b4721b6bf0236253b068dbba
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Added a couple of sub-sections (Coverity Scan and Test Configuration)
under "Add build configuration" to update the patch owners on the
sections they need to be aware of while introducing new source files.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I84adb182f9633863aac864df43578249c2269c1e
Extract the UUID from the SP layout JSON file if the optional 'uuid'
field exists otherwise fall back to the current method for extracting
the SP UUID from the partition manifest file.
This change gives a way to decouple TF-A's dependency on the SP
manifest file's format which is tied to the SPMC.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: I13af066c1de58bfb9c3fd470ee137ea0275cd98c
Cortex-A710 erratum 2136059 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[44] to 1 which will cause
the CPP instruction to invalidate the hardware prefetcher state
trained from any EL.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I43a86a365418fb663cc1b6ab1d365b4beddae0bc
Cortex-A710 erratum 2267065 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR_EL1[22] to 1'b1. Setting
CPUACTLR_EL1[22] will cause the CFP instruction to invalidate
all branch predictor resources regardless of context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ia9085aaf9b2b6a2b25d03ab36bd3774839fac9aa
Cortex-X2 erratum 2216384 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[17] to 1'b1 followed by
applying an instruction patching sequence.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I3c216161678887c06a28c59644e784e0c7d37bab
Cortex-X2 erratum 2081180 is a Cat B erratum present in r0p0, r1p0
and r2p0 of the Cortex-X2 processor core.
Cortex-X2 SDEN: https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I64bed2fd5b7e12932d6de2ae668786e689885188
Venkatesh Yadav Abbarapu
Jorge Ramirez-Ortiz
Manish V Badarkhe
Sandrine Bailleux
Sieu Mun Tang
Jayanth Dodderi Chidanand
Marc Bonnici
Daniel Boulby
Bipin Ravi
Soby Mathew
Rex-BC Chen
Jiafei Pan
Varun Wadekar
Sebastien Pasdeloup
Pali Rohár
johpow01
Yann Gautier
Yann Gautier
Manish Pandey
Vishnu Banavath
Ying-Chun Liu (PaulLiu)
Imre Kis