This is only a formatting change but makes it instantly clear how each
region is set. This is over 80 chars and the MT_RO are not strictly
needed but this section very important to get right so make readability
the priority here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: I2432deda05d4502b3478170296b5da43f26ad8e6
This makes definitions more consistent, plus helps alignment.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: I38fcdd76207586613d9934c9dc83d7a347e9e0fc
This patch forces all cacheable atomic instructions to be near, which
improves performance in highly contended parallelized use-cases.
Change-Id: I93fac62847f4af8d5eaaf3b52318c30893e947d3
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
The BL1 stage setup code for ARM platforms sets up the SP805 watchdog
controller as the secure watchdog. But not all ARM platforms use SP805
as the secure watchdog controller.
So introduce two new ARM platform code specific wrapper functions to
start and stop the secure watchdog. These functions then replace the
calls to SP805 driver in common BL1 setup code. All the ARM platforms
implement these wrapper functions by either calling into SP805 driver
or the SBSA watchdog driver.
Change-Id: I1a9a11b124cf3fac2a84f22ca40acd440a441257
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Add a driver for configuring the SBSA Generic Watchdog which aids in
the detection of errant system behaviour.
Change-Id: I5a1e7149c69fd8b85be7dfbcf511f431339946f4
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Under certain near idle conditions, DSU may miss response transfers on
the ACE master or Peripheral port, leading to deadlock. This workaround
disables high-level clock gating of the DSU to prevent this.
Change-Id: I820911d61570bacb38dd325b3519bc8d12caa14b
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Under specific conditions, the processor might issue an eviction and an
L2 cache clean operation to the interconnect in the wrong order. Set
the CPUACTLR.ENDCCASCI bit to 1 to avoid this.
Change-Id: Ide7393adeae04581fa70eb9173b742049fc3e050
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
There is a bug in the shared heap implementation for SGM. Until the bug
is solved, the default implementation is used.
Change-Id: I010911a3f00ed860f742b14daad1d99b9e7ce711
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
On Cortex A9 an errata can cause the processor to violate the rules for
speculative fetches when the MMU is off but branch prediction has not
been disabled. The workaround for this is to execute an Invalidate
Entire Branch Prediction Array (BPIALL) followed by a DSB.
see:http://arminfo.emea.arm.com/help/topic/com.arm.doc.uan0009d/UAN0009_cortex_a9_errata_r4.pdf
for more details.
Change-Id: I9146c1fa7563a79f4e15b6251617b9620a587c93
Signed-off-by: Joel Hutton <Joel.Hutton@arm.com>
The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.
The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.
Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
- Fix broken link to the issue tracker.
- Add contents section to make navigation easier throughout the page.
- Move the link to documentation contents near the top. Where it was
before could be missed and documentation might seem inaccessible.
Change-Id: I502e4fc0fd312459cda351d30a8781c221625724
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
The weak version of plat_get_mbedtls_heap() was being used.
Change-Id: I6da331a098dd1af5bb64729d5b914cfb74b8869e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The user guide documentation for the cert_create tool needs to
mention that a platform must have a platform_oid.h header file
in order to successfully build the cert_create tool when
USE_TBBR_DEFS is 0.
Change-Id: I77f86a022d207e88a79c97741be3eafbfa0c86f1
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
This file is used when building the cert_create tool without using
the 'standard' set of Arm OID values as defined in the TBBR
specification (see tbbr_oid.h). This configuration is enabled by
setting USE_TBBR_DEFS to 0 during build.
At the moment this will fail because the header file included by
this file was removed in commit bb41eb7a9d ("cert: move
platform_oid.h to include/tools_share for all platforms"). For
the SGM platform this means that there is no current use for
this file.
Change-Id: I3c82983ada62330f1ab6be6d6c0cf489adabae7b
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Update the revision number in the revision management file.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: If8918efad0fcbe6f91b66c0c7438406b1d4fb759
Changed to save and restore cntpct_el0 using memory mapped
register for generic timer when System Suspend and Resume.
Reported by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I40fd9f5434c4d52b320cd1d20322b9b8e4e67155
Very rarely, LPDDR4 power consumption may not decrease
In self-refresh mode.
This patch fixes the DBSC4 self-refresh mode sequence.
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Kenji Miyazawa <kenji.miyazawa.xt@renesas.com>
Signed-off-by: Chiaki Fujii <chiaki.fujii.wj@renesas.com>
Change-Id: I838fa0892b1caf1ecd3f04538b3427e7d971ef59
Update the revision number in the revision management file.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I239f4d9f58d38515a49fa1a22cece48b59710d15
Some Allwinner H6 has a broken watchdog that doesn't
make the soc reboot.
Use the R_WATCHDOG instead.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Change-Id: Ie95cc30a80ed517b60b30d6bc2e655a1b53f18ba
From the hotplug testing on Hikey960, in some case cores fail to become
online in the system. When some cores are hotplugged off, if other
cores in the same cluster enter into CPU idle states at the meantime,
the cluster will be powered off. This introduces the state machine
malfunction in the power controller, thus when hotplug on the core
afterwards, it fails to boot up the core because the power controller
thinks the cluster is powered on.
This patch is to avoid race condition between hotplug and idles by
preventing cluster power off when some of cores in the cluster are
hotplugged off, if all cores in the same cluster are hotplugged off,
the cluster can be powered off.
Change-Id: Ib2feeb093357c70409a3536cb4f9da9b504fdcbe
Signed-off-by: Wei Yu <yuwei3@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
On Cortex-A7 an L2 set/way cache maintenance operation can overtake
an L1 set/way cache maintenance operation. The mitigation for this is
to use a `DSB` instruction before changing cache. The cache cleaning
code happens to already be doing this, so only a comment was added.
Change-Id: Ia1ffb8ca8b6bbbba422ed6f6818671ef9fe02d90
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
The spm_sp_get_by_uuid() function is used to look up the secure
partition that provides a given service.
Within this function, memcmp() is used to compare the service
UUIDs but it uses the size of the rdsvc->uuid pointer instead of
the size of its content (missing dereference). This means that only
a partial comparison is performed as UUIDs are 128 bits in length and
rdsvc->uuid is a uint32_t typed pointer.
Instead, use the size of the array pointed to by the svc_uuid parameter,
which will be the full 128 bits, for the comparison.
Change-Id: I258fb0cca3bf19f97b8f2a4c133981647cd050e4
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
The data structures in the auth-framework were changed by the previous
patch, and need to be updated.
Change-Id: Icfad2ac688d03d32aa93e45f930a375abbc164a9
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
This changes the auth_img_desc_t struct to have pointers to struct
arrays instead of struct arrays. This saves memory as many of these
were never used, and can be NULL pointers. Note the memory savings are
only when these arrays are not initialised, as it is assumed these
arrays are fixed length. A possible future optimisation could allow for
variable length.
memory diff:
bl1: bl2:
text text
-12 -12
bss bss
-1463 0
data data
-56 -48
rodata rodata
-5688 -2592
total total
-7419 -2652
Change-Id: I8f9bdedf75048b8867f40c56381e3a6dc6402bcc
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
When Trusted Board Boot is enabled, we need to specify the Chain of
Trust (CoT) of the BL1 and BL2 images. A CoT consists of an array
of image descriptors. The authentication module assumes that each
image descriptor in this array is indexed by its unique image
identifier. For example, the Trusted Boot Firmware Certificate has to
be at index [TRUSTED_BOOT_FW_CERT_ID].
Unique image identifiers may not necessarily be consecutive. Also,
a given BL image might not use all image descriptors. For example, BL1
does not need any of the descriptors related to BL31. As a result, the
CoT array might contain holes, which unnecessarily takes up space in
the BL binary.
Using pointers to auth_img_desc_t structs (rather than structs
themselves) means these unused elements only use 1 pointer worth of
space, rather than one struct worth of space. This patch also changes
the code which accesses this array to reflect the change to pointers.
Image descriptors not needed in BL1 or BL2 respectively are also
ifdef'd out in this patch. For example, verifying the BL31 image is
the responsibility of BL2 so BL1 does not need any of the data
structures describing BL31.
memory diff:
bl1: bl2:
text text
-20 -20
bss bss
-1463 0
data data
-256 -48
rodata rodata
-5240 -1952
total total
-6979 -2020
Change-Id: I163668b174dc2b9bbb183acec817f2126864aaad
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
The Cortex-A12's primary part number is 0xC0D not 0xC0C, so
fix that to make the A12's cpu operations findable.
Change-Id: I4440a039cd57a2fe425fd8a8ec5499ca8e895e31
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Antonio Niño Díaz
Andrew F. Davis
Louis Mayencourt
Aditya Angadi
John Tsichritzis
Joel Hutton
Ambroise Vincent
Paul Beesley
Toshiyuki Ogasahara
Yoshifumi Hosoya
Chiaki Fujii
Yusuke Goda
Clément Péron
Wei Yu
Alexei Fedorov
Heiko Stuebner