In case of load error, platform may need to try another instance, either
from another storage, or from the same storage in case of PSA FWU. On
MTD devices such as NAND, it is required to define backup partitions.
A new function plat_setup_try_img_ops() should be called by platform
code to register handlers (plat_try_images_ops) to manage loading
other images.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ideaecaf296c0037a26fb4e6680f33e507111378a
The plat_try_next_boot_source() API is not used by any upstream platform
and not used by platforms that asked for this API. It is then removed.
It will be replaced with a more generic interface in next patch.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I298c7acace8c5efb3c66422d8d9280ecd08e5ade
Refactor console_flush() and console_switch_state(CONSOLE_FLAG_RUNTIME)
to bl31_main(). This has been done per the recommendation in TF-A
mailing list. These calls need to be the last calls, after any runtime
initialization has been done, before BL31 exits.
All platforms that override the generic implementation of
bl31_plat_runtime_setup() have been refactored. The console_flush()
and console_switch_state() calls have been removed as they become
part of bl31_main() function.
Any platform that don't need to make any change to the generic (weak)
implementation of bl31_plat_runtime_setup() don't need to override it
in their platforms.
Change-Id: I6d04d6daa9353daeaa7e3df9e9adf6f322a917b8
Signed-off-by: Salman Nabi <salman.nabi@arm.com>
Layout calculation is spread out between core BL1 logic and common
platform code. Relocate these into common platform code so they are
organised logically.
Change-Id: I8b05403e41b800957a0367316cecd373d10bb1a4
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
This patch resolves the MISRA issues reported in mailing list.
It addresses the following MISRA Rules violations - Rule 15.7 and
Rule 2.4.
* As per Rule 15.7, All if.. else if constructs should be terminated
with an else statement and hence the conditional block
has been changed to switch..case. Updated get_el_str() to include
all EL cases.
* As per Rule 2.4, A project should not contain unused tag declarations,
hence intr_type_desc tag is removed.
* bl31_lib_init is only used in translation unit and hence it's
declaration is removed from bl31.h and the definition is made static to
maintain visibility.
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: Ica1d3041566baf51befcad5fd3714189117ba193
GIC600 erratum 2384374 is a Category B erratum. Part 1 is fixed
in this patch, and the Part 1 failure mode is described as
'If the packet to be sent is a SET packet, then a higher priority SET
may not be sent when it should be until an unblocking event occurs.'
This is handled by calling gicv3_apply_errata_wa_2384374() in the
ehf_deactivate_priority() path, so that when EHF restores the priority
to the original priority, the interrupt packet buffered
in the GIC can be sent.
gicv3_apply_errata_wa_2384374() is the workaround for
the Part 2 of erratum 2384374 which flush packets from the GIC buffer
and is being used in this patch.
SDEN can be found here:
https://developer.arm.com/documentation/sden892601/latest/
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I4bb6dcf86c94125cbc574e0dc5119abe43e84731
TF-A plans to move console_flush() and
console_switch_state(CONSOLE_FLAG_RUNTIME) to the end of bl31_main()
before BL31 exits.
Add console_flush() in the generic implementation of
bl31_plat_runtime_setup() call so that platforms can implement or
follow the generic pattern to test this implementation before
console_flush() and console_switch_state() move to bl31_main().
This patch affects the generic implementation of
bl31_plat_runtime_setup()
Change-Id: I92b4176022bfb84558dec5a83386e8ecef49516a
Signed-off-by: Salman Nabi <salman.nabi@arm.com>
This patch removes RAS_FFH_SUPPORT macro which is the combination of
ENABLE_FEAT_RAS and HANDLE_EA_EL3_FIRST_NS. Instead introduce an
internal macro FFH_SUPPORT which gets enabled when platforms wants
to enable lower EL EA handling at EL3. The internal macro FFH_SUPPORT
will be automatically enabled if HANDLE_EA_EL3_FIRST_NS is enabled.
FFH_SUPPORT along with ENABLE_FEAT_RAS will be used in source files
to provide equivalent check which was provided by RAS_FFH_SUPPORT
earlier. In generic code we needed a macro which could abstract both
HANDLE_EA_EL3_FIRST_NS and RAS_FFH_SUPPORT macros that had limitations.
Former was tied up with NS world only while the latter was tied to RAS
feature.
This is to allow Secure/Realm world to have their own FFH macros
in future.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ie5692ccbf462f5dcc3f005a5beea5aa35124ac73
For EL3 SPMC configuration enabled platforms, allow the reuse of
SPM_MM specific definitions.
Signed-off-by: Nishant Sharma <nishant.sharma@arm.com>
Change-Id: Ic88db49d4f854c718d064b2c301a639fc2df2857
Rather than returning 0 or 1, the above function returns bool false
or true. No functional change.
Change-Id: Iea904ffc368568208fa8203e0d2e0cdaa500b1e0
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Rather than validating the type of interrupts supported by the
platform interrupt controller, the interrupt management framework can
directly use helper utilities implemented by the generic interrupt
controller driver.
Change-Id: I735f8d2742a2c7974d11c0a5ddc771ad807c635c
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
The generic interrupt controller identifies an interrupt based on its
type whereas the GIC uses the notion of groups to identify an
interrupt.
Currently, they are used interchangeably in GICv3 driver. It did not
cause any functional issues since the matching type and group had the
same value for corresponding macros. This patch makes the necessary
fixes.
The generic interrupt controller APIs, such as
plat_ic_set_interrupt_type map interrupt type to interrupt group
supported by the GICv3 IP. Similarly, other generic interrupt
controller APIs map interrupt group to interrupt type as needed.
This patch also changes the name of the helper functions to use group
rather than type for handling interrupts.
Change-Id: Ie2d88a3260c71e4ab9c8baacde24cc21e551de3d
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
The generic interrupt controller identifies an interrupt based on its
type whereas the GIC uses the notion of groups to identify an
interrupt.
This patch changes the name of the helper functions to use group
rather than type for handling interrupts. No functional change in this
patch.
Change-Id: If13ec65cc6c87c2da73a3d54b033f02635ff924a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Build fails when RAS and SPM are enabled together and when PLAT_SP_PRI
EHF priority is equal to PLAT_RAS_PRI EHF priority.
So add checks to register SPM priority with the EHF framework only when
the priority is different from RAS priority or when RAS is not enabled
on the platform.
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>
Change-Id: Ie14f82d27c9835b24890cc4561a56821881cf0ec
The current usage of RAS_EXTENSION in TF-A codebase is to cater for two
things in TF-A :
1. Pull in necessary framework and platform hooks for Firmware first
handling(FFH) of RAS errors.
2. Manage the FEAT_RAS extension when switching the worlds.
FFH means that all the EAs from NS are trapped in EL3 first and signaled
to NS world later after the first handling is done in firmware. There is
an alternate way of handling RAS errors viz Kernel First handling(KFH).
Tying FEAT_RAS to RAS_EXTENSION build flag was not correct as the
feature is needed for proper handling KFH in as well.
This patch breaks down the RAS_EXTENSION flag into a flag to denote the
CPU architecture `ENABLE_FEAT_RAS` which is used in context management
during world switch and another flag `RAS_FFH_SUPPORT` to pull in
required framework and platform hooks for FFH.
Proper support for KFH will be added in future patches.
BREAKING CHANGE: The previous RAS_EXTENSION is now deprecated. The
equivalent functionality can be achieved by the following
2 options:
- ENABLE_FEAT_RAS
- RAS_FFH_SUPPORT
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I1abb9ab6622b8f1b15712b12f17612804d48a6ec
Currently we call el3_panic for panics from EL3 and elx_panic for
panics from lower ELs.
When we boot into a rich OS environment and interact with BL31 using
SMC/ABI calls and we can also decide to handle any lower EL panics in
EL3. Panic can occur in lower EL from rich OS or during SMC/ABI calls
after context switch to EL3.
But after booting into any rich OS we may land in panic either from
rich OS or while servicing any SMC call, here the logic to use
el3_panic or elx_panic is flawed as spsr_el3[3:0] is always EL3h
and end up in elx_panic even if panic occurred from EL3 during
SMC handling.
We try to decouple the elx_panic usage for its intended purpose,
introduce lower_el_panic which would call elx_panic, currently
lower_el_panic is called from default platform_ea_handle which
would be called due to panic from any of the lower ELs.
Also remove the weak linkage for elx_panic and rename it to
report_elx_panic which could be used with lower_el_panic.
Change-Id: I268bca89c01c60520d127ef6c7ba851460edc747
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Remove usage of HANDLE_EA_EL3_FIRST_NS in plat_default_ea_handler
Change-Id: I2bf4788960d20a090d66cf39c7bbbdea1d3243ca
Signed-off-by: Govindraj Raja <govindraj.raja@arm.com>
Some of our specialized sections are not prefixed with the conventional
period. The compiler uses input section names to derive certain other
section names (e.g. `.rela.text`, `.relacpu_ops`), and these can be
difficult to select in linker scripts when there is a lack of a
delimiter.
This change introduces the period prefix to all specialized section
names.
BREAKING-CHANGE: All input and output linker section names have been
prefixed with the period character, e.g. `cpu_ops` -> `.cpu_ops`.
Change-Id: I51c13c5266d5975fbd944ef4961328e72f82fc1c
Signed-off-by: Chris Kay <chris.kay@arm.com>
Mapped SPMC manifest region as EL3_PAS so that it will get
mapped as Root region in RME enabled system otherwise Secure
region.
Change-Id: I1af5344d7516e948d5b3664bcdb94cdfc367cd78
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Current code skips load of spinlock address when cache is disabled. The
following call to spin_unlock stores into the random location that x0
points to.
Move spinlock address load earlier so that x0 is always valid on
spin_unlock call.
Change-Id: Iac640289725dce2518f2fed483d7d36ca748ffe8
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Current RAS framework in TF-A only supports handling errors originating
from NS world but the HANDLE_EA_EL3_FIRST flag configures it for all
lower Els. To make the current design of RAS explicit, rename this macro
to HANDLE_EA_EL3_FIRST_NS and set EA bit in scr_el3 only when
switching to NS world.
Note: I am unaware of any platform which traps errors originating in
Secure world to EL3, if there is any such platform then it need to
be explicitly implemented in TF-A
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: If58eb201d8fa792c16325c85c26056e9b409b750
get_el_str() was implemented under ENABLE_BACKTRACE macro but being
used at generic places too, this causes multiple definition of this
function.
Remove duplicate definition of this function and move it out of
backtrace scope. Also, this patch fixes a small bug where in default
case S-EL1 is returned which ideally should be EL1, as there is no
notion of security state in EL string.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib186ea03b776e2478eff556065449ebd478c3538
New helper functions are created to handle data & prefetch aborts
in AARCH32. They call platform functions, just like what
report_exception is doing.
As extended MSR/MRS instructions (to access lr_abt in monitor mode)
are only available if CPU (Armv7) has virtualization extension,
the functions branch to original report_exception handlers if this is
not the case.
Those new helpers are created mainly to distinguish data and prefetch
aborts, as they both share the same mode.
This adds 40 bytes of code.
Change-Id: I5dd31930344ad4e3a658f8a9d366a87a300aeb67
Signed-off-by: Yann Gautier <yann.gautier@st.com>
- Removing platform dependencies from libc modules.
- Replacing panicking with actual error handling.
- Debug macros are included indirectly from assert.h. Removing
"platform_def.h" from assert.h and adding "common/debug.h"
where the macros are used.
- Removing hack for fixing PLAT_LOG_LEVEL_ASSERT to 40.
Instead removing assert with expression, as this
does not provide additional information.
Signed-off-by: Claus Pedersen <claustbp@google.com>
Change-Id: Icc201ea7b63c1277e423c1cfd13fd6816c2bc568
This patch adds two helper functions:
- plat_ic_raise_ns_sgi to raise a NS SGI
- plat_ic_raise_s_el1_sgi to raise a S-EL1 SGI
Signed-off-by: Florian Lugou <florian.lugou@provenrun.com>
Change-Id: I6f262dd1da1d77fec3f850eb74189e726b8e24da
The current implementation uses plat_arm API under generic code.
"plat_arm" API is a convention used with Arm common platform layer
and is reserved for that purpose. In addition, the function has a
weak definition which is not encouraged in TF-A.
Henceforth, removing the weak API with a configurable macro "TWED_DELAY"
of numeric data type in generic code and simplifying the implementation.
By default "TWED_DELAY" is defined to zero, and the delay value need to
be explicitly set by the platforms during buildtime.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I25cd6f628e863dc40415ced3a82d0662fdf2d75a
Use long instead of long long on aarch64 for 64_t stdint types.
Introduce inttypes.h to properly support printf format specifiers for
fixed width types for such change.
Change-Id: I0bca594687a996fde0a9702d7a383055b99f10a1
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Subsequent patches will provide a solution to do the BL2 hash measurement
and recording in BL1 itself, hence in preparation to adopt that solution
remove the logic of passing BL2 hash measurement to BL2 component
via TB_FW config.
Change-Id: Iff9b3d4c6a236a33b942898fcdf799cbab89b724
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Put default ea handler implementation into function plat_default_ea_handler()
which just print verbose information and panic, so it can be called also
from overwritten / weak function plat_ea_handler() implementation.
Replace every custom implementation of printing verbose error message of
external aborts in custom plat_ea_handler() functions by a common
implementation from plat_default_ea_handler() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I15897f61b62b4c3c29351e693f51d4df381f3b98
External Abort may happen also during printing of some messages by
U-Boot or kernel. So print newline before fatal abort error message.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic7579b605e695c2e4cb9a4f5cdc2d0b3e5083e49
Fix a number of typos and misspellings in TF-A
documentation and comments.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Change-Id: I34c5a28c3af15f28d1ccada4d9866aee6af136ee
Currently, when RECLAIM_INIT_CODE is set, the
stacks are scaled to ensure that the entirety
of the init section can be reclaimed as stack.
This causes an issue in lib/psci/aarch64/psci_helpers.S,
where the stack size is used for cache operations in
psci_do_pwrdown_cache_maintenance(). If the stacks
are scaled, then the PSCI code may fail to invalidate
some of the stack memory before power down.
Resizing stacks is also not good for stability in general,
since code that works with a small number of cores may
overflow the stack when the number of cores is increased.
Change to make every stack be PLATFORM_STACK_SIZE big,
and allow the total stack to be smaller than the
init section.
Any pages of the init section not reclaimed as
stack will be set to read-only and execute-never,
for security.
Change-Id: I10b3884981006431f2fcbec3864c81d4a8c246e8
Signed-off-by: David Horstmann <david.horstmann@arm.com>
And from crash_console_flush.
We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.
Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
'EHF' is used by RAS, SDEI, SPM_MM common frameworks.
If platform needs to plug-in specific handlers then
'PLAT_EHF_DESC' can be used to populate platform specific
priority levels.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Change-Id: I37af7e0e48111f87b6982604bf5c15db3e05755d
This patch includes the bl_common.h from plat_spmd_manifest.c to
fix the following compilation errors
<snip>
plat/common/plat_spmd_manifest.c: In function 'plat_spm_core_manifest_load':
plat/common/plat_spmd_manifest.c:130:18: error: implicit declaration of function 'page_align' [-Werror=implicit-function-declaration]
130 | pm_base_align = page_align(pm_base, UP);
| ^~~~~~~~~~
plat/common/plat_spmd_manifest.c:130:38: error: 'UP' undeclared (first use in this function); did you mean 'UL'?
130 | pm_base_align = page_align(pm_base, UP);
| ^~
| UL
plat/common/plat_spmd_manifest.c:130:38: note: each undeclared identifier is reported only once for each function it appears in
plat/common/plat_spmd_manifest.c:146:38: error: 'DOWN' undeclared (first use in this function)
146 | pm_base_align = page_align(pm_base, DOWN);
| ^~~~
cc1: all warnings being treated as errors
<snip>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ib8edb36c6a80a23df2462e708c513c966aab1fef
This resolves MISRA defects such as:
plat/common/plat_bl1_common.c:63:[MISRA C-2012 Rule 14.4 (required)]
The condition expression "1" does not have an essentially boolean type.
Change-Id: I679411980ad661191fbc834a44a5eca5494fd0e2
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
There was a collision between the name of the typedef in the CASSERT and
something else, so we make the name of the typedef unique to the
invocation of DEFFINE_SVC_UUID2 by appending the name that's passed into
the macro. This eliminates the following MISRA violation:
bl1/bl1_main.c:233:[MISRA C-2012 Rule 5.6 (required)] Identifier
"invalid_svc_uuid" is already used to represent a typedef.
This also resolves MISRA rule 5.9.
These renamings are as follows:
* tzram -> secram. This matches the function call name as it has
sec_mem in it's name
* fw_config_base -> config_base. This file does not mess with
hw_conig, so there's little chance of confusion
Change-Id: I8734ba0956140c8e29b89d0596d10d61a6ef351e
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
This patch fixes BL31 linker error
"relocation R_AARCH64_ABS32 against `a local symbol'
can not be used when making a shared object"
when Position Independent Executable (PIE) support
is enabled with ENABLE_PIE=1 build option.
Change-Id: I2692269676db3f3b27eed499fc029fffb67969be
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Currently, 'SMCCC_ARCH_FEATURES' SMC call handler unconditionally
returns 'SMC_OK' for 'SMCCC_ARCH_SOC_ID' function. This seems to
be not correct for the platform which doesn't implement soc-id
functionality i.e. functions to retrieve both soc-version and
soc-revision.
Hence introduced a platform function which will check whether SMCCC
feature is available for the platform.
Also, updated porting guide for the newly added platform function.
Change-Id: I389f0ef6b0837bb24c712aa995b7176117bc7961
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch adds support for Measured Boot driver functionality
in BL1 and BL2 code.
Change-Id: I7239a94c3e32b0a3e9e73768a0140e0b52ab0361
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
while mapping SPMC manifest page in the SPMD translation regime the
mapped size was resolved to zero if SPMC manifest base address is PAGE
aligned, causing SPMD to abort.
To fix the problem change mapped size to PAGE_SIZE if manifest base is
PAGE aligned.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I06cd39dbefaf492682d9bbb0c82b950dd31fb416
The patch fixes BL31 linker script error
"Init code ends past the end of the stacks"
for platforms with number of CPUs less than 4,
which is caused by __STACKS_END__ address being
lower than __INIT_CODE_END__.
The modified BL31 linker script detects such cases
and increases the total amount of stack memory,
setting __STACKS_END__ = __INIT_CODE_END__, and
CPUs' stacks are calculated by BL31 'plat_get_my_stack'
function accordingly. For platforms with more than 4 CPUs
and __INIT_CODE_END__ < __STACKS_END__ stack memory does not
increase and allocated CPUs' stacks match the existing
implementation.
The patch removes exclusion of PSCI initialization
functions from the reclaimed .init section in
'arm_reclaim_init.ld.S' script, which increases the
size of reclaimed memory region.
Change-Id: I927773e00dd84e1ffe72f9ee534f4f2fc7b6153c
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
SPCI is renamed as PSA FF-A which stands for Platform Security
Architecture Firmware Framework for A class processors.
This patch replaces the occurrence of SPCI with PSA FF-A(in documents)
or simply FFA(in code).
Change-Id: I4ab10adb9ffeef1ff784641dfafd99f515133760
Signed-off-by: J-Alves <joao.alves@arm.com>
This patch enables the v8.6 extension to add a delay before WFE traps
are taken. A weak hook plat_arm_set_twedel_scr_el3 has been added in
plat/common/aarch64/plat_common.c that disables this feature by default
but platform-specific code can override it when needed.
The only hook provided sets the TWED fields in SCR_EL3, there are similar
fields in HCR_EL2, SCTLR_EL2, and SCTLR_EL1 to control WFE trap delays in
lower ELs but these should be configured by code running at EL2 and/or EL1
depending on the platform configuration and is outside the scope of TF-A.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I0a9bb814205efeab693a3d0a0623e62144abba2d
Currently BL2 passes TOS_FW_CONFIG address and size through registers to
BL31. This corresponds to SPMC manifest load address and size. The SPMC
manifest is mapped in BL31 by dynamic mapping. This patch removes BL2
changes from generic code (which were enclosed by SPD=spmd) and retrieves
SPMC manifest size directly from within SPMD. The SPMC manifest load
address is still passed through a register by generic code.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I35c5abd95c616ae25677302f0b1d0c45c51c042f
As a follow-up to bdd2596d4, and related to SPM Dispatcher
EL3 component and SPM Core S-EL2/S-EL1 component: update
with cosmetic and coding rules changes. In addition:
-Add Armv8.4-SecEL2 arch detection helper.
-Add an SPMC context (on current core) get helper.
-Return more meaningful error return codes.
-Remove complexity in few spmd_smc_handler switch-cases.
-Remove unused defines and structures from spmd_private.h
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I99e642450b0dafb19d3218a2f0e2d3107e8ca3fe
Our fdtw_read_cells() implementation goes to great lengths to
sanity-check every parameter and result, but leaves a big hole open:
The size of the storage the value pointer points at needs to match the
number of cells given. This can't be easily checked at compile time,
since we lose the size information by using a void pointer.
Regardless the current usage of this function is somewhat wrong anyways,
since we use it on single-element, fixed-length properties only, for
which the DT binding specifies the size.
Typically we use those functions dealing with a number of cells in DT
context to deal with *dynamically* sized properties, which depend on
other properties (#size-cells, #clock-cells, ...), to specify the number
of cells needed.
Another problem with the current implementation is the use of
ambiguously sized types (uintptr_t, size_t) together with a certain
expectation about their size. In general there is no relation between
the length of a DT property and the bitness of the code that parses the
DTB: AArch64 code could encounter 32-bit addresses (where the physical
address space is limited to 4GB [1]), while AArch32 code could read
64-bit sized properties (/memory nodes on LPAE systems, [2]).
To make this more clear, fix the potential issues and also align more
with other DT users (Linux and U-Boot), introduce functions to explicitly
read uint32 and uint64 properties. As the other DT consumers, we do this
based on the generic "read array" function.
Convert all users to use either of those two new functions, and make
sure we never use a pointer to anything other than uint32_t or uint64_t
variables directly.
This reveals (and fixes) a bug in plat_spmd_manifest.c, where we write
4 bytes into a uint16_t variable (passed via a void pointer).
Also we change the implementation of the function to better align with
other libfdt users, by using the right types (fdt32_t) and common
variable names (*prop, prop_names).
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi#n874
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/ecx-2000.dts
Change-Id: I718de960515117ac7a3331a1b177d2ec224a3890
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
On DynamIQ CPU FVPs, stats test cases are failing when
hardware-assisted coherency is enabled due to a corrupt
timestamp value. Investigation of the issue indicates that
on these models the timestamp value is stored in cache
instead of memory. This patch flushes the dcache when the
timestamp is stored to make sure it is stored in memory.
Change-Id: I05cd54ba5991a5a96dd07f1e08b5212273201411
Signed-off-by: Zelalem <zelalem.aweke@arm.com>
Yann Gautier
Salman Nabi
Harrison Mutai
Arvind Ram Prakash
Manish Pandey
Nishant Sharma
Madhukar Pappireddy
Omkar Anand Kulkarni
Elyes Haouas
Govindraj Raja
Chris Kay
Manish V Badarkhe
Baruch Siach
Claus Pedersen
Florian Lugou
Jayanth Dodderi Chidanand
Scott Branden
Pali Rohár
David Horstmann
Jimmy Brisson
Sandeep Tripathy
Varun Wadekar
Alexei Fedorov
J-Alves
johpow01
Olivier Deprez
Andre Przywara
Zelalem