* changes:
fdts: stm32mp1: realign device tree files with internal devs
stm32mp1: increase device tree size to 20kB
stm32mp1: make dt_get_stdout_node_offset() static
stm32mp1: use unsigned values for SDMMC defines
stm32mp1: remove useless LIBFDT_SRCS from PLAT_BL_COMMON_SOURCES
stm32mp1: update doc for U-Boot compilation
stm32mp1: add general SYSCFG management
stm32mp1: move stm32_get_gpio_bank_clock() to private file
clk: stm32mp1: correctly handle Clock Spreading Generator
clk: stm32mp1: use defines for mask values in stm32mp1_clk_sel array
clk: stm32mp1: move oscillator functions to generic file
arch: add some defines for generic timer registers
Now that QoS drivers are cleaned up , move them out of staging.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: If61ab2157c30b8f5a6b91d2c56ddbb9098ef99e8
Convert the DBSC QoS setting function to a simple table of register-value
pairs and pass it to common rcar_qos_dbsc_setting() to write those values
to matching registers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I3e8b0251099b57581ebdcfce5670bff5579dc505
Convert the DBSC QoS setting function to a simple table of register-value
pairs and pass it to common rcar_qos_dbsc_setting() to write those values
to matching registers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I1757eee9a209c368d0e8fba9809e56b8090ee43f
Convert the DBSC QoS setting function to a simple table of register-value
pairs and pass it to common rcar_qos_dbsc_setting() to write those values
to matching registers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I81b48475114fc293766a6d7f2b46f8e913a51b06
Convert the DBSC QoS setting function to a simple table of register-value
pairs and pass it to common rcar_qos_dbsc_setting() to write those values
to matching registers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I46b445a77b39412e7a41ae0e0e087a409d0c22e3
Convert the DBSC QoS setting function to a simple table of register-value
pairs and pass it to common rcar_qos_dbsc_setting() to write those values
to matching registers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ie2cbfdacf6d1c7eca4498ab7787b866a83660485
Convert the DBSC QoS setting function to a simple table of register-value
pairs and pass it to common rcar_qos_dbsc_setting() to write those values
to matching registers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I62b133ea4f4129a641b779a782938976ad52fbfe
The DBSC QoS settings can be programmed by iterating over a table with
register-value pairs and writing those to the registers, add function
to do just that. Subsequent patches will convert the DBSC QoS setting
functions for each SoC to this new function.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I949c46a0f032661a58000cb5f7829349e973438c
Drop useless comments in dbsc_setting(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I8a113d253f39e5b6a61e16b1740f9a66b2540753
Convert the mstat table from a complex structure to simple sequence
of uint64_t values, since the structure described just that and the
loop can operate over incrementing sequence of addresses just fine.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: If1917605e5540a38cbd763c56fc1e677573e7066
Pull out the mstat fix array into separate file, to align the structure
of the driver with the other SoCs. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ifb6644063d8f463e2eb20bdadc5b69ab74ac591d
Use common qos_regs.h instead of a local copy in the V3M QoS init.
Fill missing registers into qos_regs.h . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I9aabff54abc05781ef606b0d09e4e9fbf7ec3968
The extra level of nesting is not necessary, drop it.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I49df37734cd6016373a5850d3b9cf4a6569c36d6
Use common qos_regs.h instead of a local copy in the E3 QoS init.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ia4336d4b6173e1dbb671a003d904dbc5dc0c196d
Replace the remaining ad-hoc register addresses with proper macros.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: If125f0c8ef77ed280107324edaa05f21979a2c27
The DBSC_SCFCTST2 is always written with the same value, no matter
what the MD pin value is, drop the entire check and just write the
register with the one and only possible value.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I44d48ad59293562539a0c1d8ffd66333714e041e
Move the DBSC write enabling and disabling to dbsc_setting() function,
to make it local, instead of having it all over the code.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: If8e5657c3230b5d82b551cb89b11c4d13a2d096b
Drop useless comments in dbsc_setting(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: If54e770ce81c9a6610cd89c3d5f01ea9b96af521
Convert the mstat table from a complex structure to simple sequence
of uint64_t values, since the structure described just that and the
loop can operate over incrementing sequence of addresses just fine.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I5f797024c76f2c18b160ac50ede9e1eac24e6652
Pull out the mstat fix array into separate file, to align the structure
of the driver with the other SoCs. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I2559c5ceb06505361d026ebc1b762bebe17d920b
Use common qos_regs.h instead of a local copy in the D3 QoS init.
Fill missing registers into qos_regs.h . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ie22a81bf5cbf3f8970c6e3fbb43ef52c26fb7168
The DBSC_SCFCTST2 is always written with the same value, no matter
what the MD pin value is, drop the entire check and just write the
register with the one and only possible value.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Icd3e12f814d4fdcddaec2d1415f0bbf92169284b
Drop useless comments in dbsc_setting(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I6fe03e16c63278aa6fc1bbcc72c07a450d3b7638
The extra level of nesting is not necessary, drop it.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I6d268eae8df5794511d5211e5a59a36291adab3e
Use common qos_regs.h instead of a local copy in the M3N QoS init.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I9670c9cdb320d6724175c22210d048af54490b47
The DBSC_SCFCTST2 is always written with the same value, no matter
what the MD pin value is, drop the entire check and just write the
register with the one and only possible value.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Idf26cf064e99e95f0140dd747183efe6a6d7f0bf
Drop useless comments in dbsc_setting(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I4460c55bf58f33ca72c9bbad99a28b5e4ef7421e
The extra level of nesting is not necessary, drop it.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I086ab1f457866f0e2c3ccd67609c0be35631f893
Convert the mstat table from a complex structure to simple sequence
of uint64_t values, since the structure described just that and the
loop can operate over incrementing sequence of addresses just fine.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I41728b30087996edc9799f320bf6a3b4465538bd
Pull out the mstat fix array into separate file, to align the structure
of the driver with the other SoCs. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I21c18e80ab9225837e5553dadcf196605e878143
Use common qos_regs.h instead of a local copy in the M3W QoS init.
Fill missing registers into qos_regs.h . No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I91175c86cdb94b9271c880df2cb65949f15f1bad
Update DDR parameters to version 1.45.
Remove useless sdmmc1_dir_pins_b node.
Add USART3 and UART7 nodes.
Correct a PMIC value for USB regulator.
Add TIMER12, TIMER15, CRYP, HASH and USBOTG_HS nodes.
Update DTSI file for SDMMC compatible, but overwrite it with the former
name.
Move BSEC board_id node to boards DTS files, as this OTP is specific to
STMicroelectronics boards.
Change-Id: If4d2fe090c6a8368afe8e21e5ac70579911d3939
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Do not export function dt_get_stdout_node_offset() that is used only inside
stm32mp_dt.c source file.
Change-Id: I9dd3dbfab21d42ed81c68723e71fe5a7586dce93
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Correct SDMMC macros to define unsigned values as expected by the
driver implementation.
Change-Id: Ib009f3df2cf26a9759d129eb571a27b2564770ce
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Remove inclusion of libfdt source files in source file list since these
are already included from generic libfdt.mk makefile.
Change-Id: If42624557c4d88ca85d70f83b1b08c58f50afe72
Signed-off-by: Yann Gautier <yann.gautier@st.com>
U-Boot should be compiled with stm32mp15_trusted_defconfig which is
supported since tag v2019.07-rc1 with commit [1].
The creation of the U-Boot binary with stm32 header is done at U-Boot
compilation step, it is no more required to call the extra command.
[1] https://git.denx.de/?p=u-boot.git;a=commit;h=015289580f81
Change-Id: Ia875c22184785fc2e02ad07993a649069cd5ce34
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The system configuration controller is mainly used to manage
the compensation cell and other IOs and system related settings.
The SYSCFG driver is in charge of configuring masters on the interconnect,
IO compensation, low voltage boards, or pull-ups for boot pins.
All other configurations should be handled in Linux drivers requiring it.
Device tree files are also updated to manage vdd-supply regulator.
Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
GPIOx clocks are specific to each STM32MP platforms.
This change moves function stm32_get_gpio_bank_clock() from stm32mp
common source files to platform private stm32mp1_private.c source file.
Change-Id: I9616c0d3fe4d10af715d6f2d1550c13ab62c829a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To activate the CSG option, the driver needs to set the bit2
of PLLNCR register = SSCG_CTRL: Spread Spectrum Clock Generator.
This bit should not be cleared when starting the PLL.
Change-Id: Ie5c720ff03655f27a7e7e9e7ccf8295dd046112f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Rework the macro that eases the table definition: the src and msk fields
are now using MASK and SHIFT defines of each source register.
Some macros had then to be modified: _USART1_SEL, _ASS_SEL and _MSS_SEL to
_UART1_SEL, _AXIS_SEL, and _MCUS_SEL to match register fields.
Note: the mask for RCC_ASSCKSELR_AXISSRC is changed from 0x3 to 0x7
to reflect the size of the register field, even if there are only
3 possible clock sources.
The mask value is also corrected for QSPI and FMC clock selection.
Change-Id: I44114e3c1dd37b9fa1be1ba519611abd9a07764c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.
The oscillators description structure is also moved to STM32MP1 clock
driver, as it is no more used in stm32mp1_clkfunc and cannot be in a
generic file.
Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Those defines are used in STM32MP1 clock driver.
It is better to put them altogether with already defined registers.
Change-Id: I6f8ad8c2477b947af6f76283a4ef5c40212d0027
Signed-off-by: Yann Gautier <yann.gautier@st.com>
John Tsichritzis
Marek Vasut
Yann Gautier